Spelling suggestions: "subject:"truetime"" "subject:"truecrime""
11 |
True-time Delay Structures For Microwave Beamforming Networks In S-band Phased ArraysTemir, Kaan 01 January 2013 (has links) (PDF)
True time delay networks are one of the most critical structures of wideband phased-array antenna systems which are frequently used in self-protection and electronic warfare applications. In order to direct the main beam of a wideband phased-array antenna to the desired direction / phase values, which are linearly dependent to frequency, are essential. Due to the phase characteristics of the true-time delay networks, beam squint problems for broadband phased array systems are minimized.
In this thesis, different types of true-time delay structures are investigated for wideband phased array applications and a tunable S-band true-time delay network having delay over 1ns with high resolution is developed, designed, fabricated and measured. Lower-cost, smaller occupied area, digital/analog control mechanism and ease of implementation are the other features of the developed network.
High delay values with high resolutions for wideband operation are achieved through the combination of several techniques / therefore the desired S-band TTD network is constructed with the synthesis of switched-transmission lines, constant-R networks and periodically-loaded transmission lines. Higher delay states are realized by the switched-transmission lines technique, while the method of constant R-network is used for the intermediate delay states. To increase the tuning flexibility, smaller delay states are accomplished by analog-voltage controlled periodically loaded transmission lines.
A step-by-step procedure is followed during the design process of the S-band true time delay network. Firstly, each method used in the TTD network is analyzed in detail and developed for PCB implementation and the use of COTS components. Then, the designed structures are verified via linear and EM simulations performed by ADS2011® / . After that, the effects of production tolerances are examined to optimize each design for S-band operations. Moreover, the designed structures are fabricated by using PCB technology and measured. Finally, a software code is developed in MATLAB to generate the overall cascaded network with the help of measured data.
|
12 |
Highly dispersive photonic crystal fibers for optical true time delay (TTD) based X-Band phased array antennaSubbaraman, Harish, 1982- 22 March 2011 (has links)
Phased array antenna (PAA) is a key component in many of the modern military and commercial radar and communication systems requiring highly directional beams with narrow beam widths. One of the advantages that this technology offers is a physical movement-free beam steering. Radar and communication technologies also require the PAA systems to be compact, light weight, demonstrate high bandwidth and electromagnetic interference (EMI) free performance. Conventional electrical phase shifters are inherently narrowband. This calls for technologies that have a larger bandwidth and high immunity to electromagnetic interference. Optical true-time-delay (TTD) technique is an emerging technology that is capable of providing these features along with the ability to provide frequency independent beam steering. Photonic crystal fiber (PCF) based optical TTD lines are capable of providing precise and continuous time delays required for PAA systems. Photonic crystal fibers are a new class of optical fibers with a periodic arrangement of air-holes around a core that can be designed to provide extraordinary optical characteristics which are unrealizable using conventional optical fibers. In this dissertation, highly dispersive photonic crystal fiber structures based on index-guidance and bandgap-guidance were designed. Designs exhibiting dispersion coefficients as large as -9500ps/nm/km and 4000ps/nm/km at 1550nm were presented. A TTD module utilizing a fabricated highly dispersive PCF with a dispersion coefficient of -600ps/nm/km at 1550nm was formed and characterized. The module consisted of 4 delay lines employing highly dispersive PCFs connected with various lengths of non-zero dispersion shifted fibers. By employing PCFs with enhanced dispersion coefficients, the TTD module size can be proportionally reduced. A 4-element linear X-band PAA system using the PCF-TTD module was formed and characterized to provide continuous time delays to steer radiofrequency (RF) beams from -41 degrees to 46 degrees by tuning the wavelength from 1530nm to 1560nm. Using the PCF-TTD based X-Band PAA system, single and simultaneous multiple beam transmission and reception capabilities were demonstrated. Noise and distortion performance characteristics of the entire PAA system were also evaluated and device control parameters were optimized to provide maximum spurious-free-dynamic range. In order to alleviate computational and weight requirements of practical large PAA systems, a sparse array instead of a standard array needs to be used. X-Band sparse array systems using PCF and dispersive fiber TTD technique were formed and RF beam steering was demonstrated. As an important achievement during the research work, the design and fabricated structure of a PCF currently reported to have the highest dispersion coefficient of -5400ps/nm/km at 1549nm, along with its limitations was also presented. Finally, other interesting applications of highly dispersive PCFs in the areas of pulse compression and soliton propagation were explored. / text
|
13 |
Sistemas de controle distribuídos em redes de comunicação. / Networked control systems.Erick Wakamoto Takarabe 25 September 2009 (has links)
Sistemas de controle distribuídos cujas malhas são fechadas através de uma rede de comunicação são chamados de sistemas de controle distribuídos em redes de comunicação (NCS - Networked Control System). Este tipo de arquitetura permite a divisão do sistema de controle em módulos interconectados através da rede de comunicação, proporcionando a divisão do processamento, a redução de custo e de peso, além de facilitar o diagnóstico e manutenção do sistema e de aumentar a sua exibilidade e agilidade; e por isso seu emprego na indústria está se tornando comum (e.g., y-by-wire e drive-by-wire). Porém, a distribuição do processamento e a inserção de uma rede de comunicação aumenta a complexidade da análise e do projeto deste tipo de sistema. Um dos fatores que contribui para esse aumento da complexidade é a presença de atrasos aleatórios nos sinais de controle, causados pela dinâmica do sistema computacional (conjunto de hardware e software) que serve como plataforma para implementação do sistema de controle digital. Este trabalho faz um estudo sobre este tipo de sistema sob a perspectiva destes sinais com atrasos. Para isso, faz-se uso dos toolboxes para MATLAB: TrueTime e Jitterbug. Através destas ferramentas, mostra-se a existência de uma relação de compromisso entre o desempenho do controle e o desempenho do sistema computacional. Através deste estudo, é proposto uma solução de um sistema de controle do tipo NCS para um ROV (do inglês Remotely Operated Vehicle), modelado através de 6 equações diferenciais desacopladas não-lineares. Este tipo de veículo tem uma relevância econômica significativa para o Brasil, visto que é utilizado em operações de manutenção e instalação de plataformas de extração do petróleo que está depositado em profundidades que variam de mil a 2 mil metros. Para este NCS proposto, são utilizados controladores do tipo PI com estrutura feedback-feedfoward cujos parâmetros de projeto são obtidos em função dos atrasos inseridos pelo sistema computacional. / Distributed control systems wherein the control loops are closed through a communication network are called Networked Control Systems (NCSs). This type of architecture allows the control systems division into modules interconnected through the communication network, providing the processing division, reduction of cost and weight, and facilitates the systems diagnosis and maintenance, and increases their exibility and agility. Therefore its use in industry is becoming common (eg, y-by-wire and drive-by-wire). However, the processing distribution and the communication network insertion increase the system analysis and design complexity. One of the factors that contributes to this increased complexity is the presence of random time delays, caused by the dynamics of the computer system (set of hardware and software) used as a platform for digital control system implementation. This work deals with the networked control systems under these random time delays view. For this, it is used two MATLAB toolboxes: Jitterbug and TrueTime. With these tools, it is shown the existence of a relationship between the performance of control and performance of computer system. With this study, it proposed a solution of a NCS for a ROV (Vehicle Operated Remotely), modeled by 6 differential nonlinear decoupled equations. This type of vehicle has a significant economic relevance for Brazil, as it is used in maintenance and installation of platforms for oil extraction deposited at depths ranging from thousand to 2 thousand meters. For this proposed NCS are adopted PI controllers with feedfoward-feedback structure whose parameters design are given in terms of delay inserted by the computer system.
|
14 |
Novel RF/Microwave Circuits And Systems for Lab on-Chip/on-Board Chemical SensorsAbbas Mohamed Helmy, Ahmed M 16 December 2013 (has links)
Recent research focuses on expanding the use of RF/Microwave circuits and systems to include multi-disciplinary applications. One example is the detection of the dielectric properties of chemicals and bio-chemicals at microwave frequencies, which is useful for pharmaceutical applications, food and drug safety, medical diagnosis and material characterization. Dielectric spectroscopy is also quite relevant to detect the frequency dispersive characteristics of materials over a wide frequency range for more accurate detection. In this dissertation, on-chip and on-board solutions for microwave chemical sensing are proposed.
An example of an on-chip dielectric detection technique for chemical sensing is presented. An on-chip sensing capacitor, whose capacitance changes when exposed to material under test (MUT), is a part of an LC voltage-controlled oscillator (VCO). The VCO is embedded inside a frequency synthesizer to convert the change in the free runing frequency frequency of the VCO into a change of its input voltage. The system is implemented using 90 nm CMOS technology and the permittivities of MUTs are evaluated using a unique detection procedure in the 7-9 GHz frequency range with an accuracy of 3.7% in an area of 2.5 × 2.5 mm^2 with a power consumption of 16.5 mW. The system is also used for binary mixture detection with a fractional volume accuracy of 1-2%.
An on-board miniaturized dielectric spectroscopy system for permittivity detec- tion is also presented. The sensor is based on the detection of the phase difference be- tween the input and output signals of cascaded broadband True-Time-Delay (TTD) cells. The sensing capacitor exposed to MUTs is a part of the TTD cell. The change of the permittivity results in a change of the phase of the microwave signal passing through the TTD cell. The system is fabricated on Rogers Duroid substrates with a total area of 8 × 7.2 cm2. The permittivities of MUTs are detected in the 1-8 GHz frequency range with a detection accuracy of 2%. Also, the sensor is used to extract the fractional volumes of mixtures with accuracy down to 1%.
Additionally, multi-band and multi-standard communication systems motivate the trend to develop broadband front-ends covering all the standards for low cost and reduced chip area. Broadband amplifiers are key building blocks in wideband front-ends. A broadband resistive feedback low-noise amplifier (LNA) is presented using a composite cross-coupled CMOS pair for a higher gain and reduced noise figure. The LNA is implemented using 90 nm CMOS technology consuming 18 mW in an area of 0.06 mm2. The LNA shows a gain of 21 dB in the 2-2300 MHz frequency range, a minimum noise figure of 1.4 dB with an IIP3 of -1.5 dBm. Also, a four-stage distributed amplifier is presented providing bandwidth extension with 1-dB flat gain response up to 16 GHz. The flat extended bandwidth is provided using coupled inductors in the gate line with series peaking inductors in the cascode gain stages. The amplifier is fabricated using 180 nm CMOS technology in an area of 1.19 mm2 achieving a power gain of 10 dB, return losses better than 16 dB, noise figure of 3.6-4.9 dB and IIP3 of 0 dBm with 21 mW power consumption.
All the implemented circuits and systems in this dissertation are validated, demonstrated and published in several IEEE Journals and Conferences.
|
15 |
Superstructured Fiber Bragg Gratings and Applications in Microwave Signal ProcessingBlais, Sébastien R. 20 December 2013 (has links)
Since their discovery in 1978 by Hill et al. and the development of the transverse holographic technique for their fabrication by Meltz et al. in 1989, fiber Bragg gratings (FBG) have become an important device for applications in optical communications, optical signal processing and fiber-optical sensors.
A superstructured fiber Bragg grating (SFBG), also called a sampled fiber Bragg grating, is a special FBG that consists of a several small FBGs placed in close proximity to one another. SFBGs have attracted much attention in recent years with the discovery of techniques allowing the creation of equivalent chirp or equivalent phase shifts. The biggest advantage of an SFBG with equivalent chirp or equivalent phase shifts is the possibility to design and fabricate gratings with greatly varying phase and amplitude responses by adjusting the spatial profile of the superstructure. The realization of SFBGs with equivalent chirp or equivalent phase shifts requires only sub-millimeter precision. This is a relief from the sub-micron precision required by traditional approaches.
In this thesis, the mathematical modeling of FBGs and SFBGs is reviewed. The use of SFBGs for various applications in photonic microwave signal processing is considered.
Four main topics are presented in this thesis. The first topic is the use of SFBG as a photonic true-time delay (TTD) beamformer for phased array antennas (PAAs).
The second topic addresses non-linearities in the group delay response of an SFBG with equivalent chirp in its sampling period. An SFBG with an equivalent chirp using only a linear chirp coefficient may yield a group delay response that deviates from the linear response required by a TTD beamformer. In the thesis, a technique to improve the linearity of the group delay response is proposed and an adaptive algorithm to find the optimal linear and non-linear chirp coefficients to produce the best linear group delay response is described. Since no closed-form solution exists to represent the amplitude and phase responses of an SFBG, we rely on a Fourier transform analogy under a weak grating approximation as a starting point in the design of an SFBG. Simulations are then used to refine the response of the SFBG. The algorithm proposed provides an optimal set of chirp coefficients that minimizes the error in the group delay response. Four gratings are fabricated using the optimized chirp coefficients and their application in a TTD PAA system is discussed.
The third topic discusses the use of an SFBG with equivalent phase shifts in its sampling period as a means to realize optical single sideband (SSB) modulation. SSB modulation eliminates the power penalty caused by chromatic dispersion experienced by an optical signal traveling through a long length of optical fiber. By introducing two π phase shifts through equivalent sampling to the SFBG, two ultra-narrow transmission bands are created in the grating stop band of the +/- 1st spectral orders. In the proposed system, a double-sideband plus carrier (DSB+C) modulated optical signal is sent to the input of an optical SSB filter based on the equivalent phase-shift SFBG in order to select the optical carrier and a single sideband, effectively blocking one sideband from propagating.
Finally, the fourth topic focuses on the implementation of a photonic microwave bandpass filter based on an SFBG with equivalent chirp. Photonic microwave filters are used to process microwave signals in the optical domain. By using a technique called phase-modulation to intensity-modulation (PM-IM) conversion, a two-tap delay line filter is created with one negative tap. A single SFBG with a chirp in its sampling period is used as a means to achieve the PM-IM conversion for the two taps. Two phase modulated optical carriers are used to generate the two taps, each entering a different port of the SFBG and thus experiencing an opposite dispersion value. The two optical signals are then recombined before being sent to a photodetector (PD) where the filtered microwave signal is recovered.
|
16 |
Superstructured Fiber Bragg Gratings and Applications in Microwave Signal ProcessingBlais, Sébastien R. January 2014 (has links)
Since their discovery in 1978 by Hill et al. and the development of the transverse holographic technique for their fabrication by Meltz et al. in 1989, fiber Bragg gratings (FBG) have become an important device for applications in optical communications, optical signal processing and fiber-optical sensors.
A superstructured fiber Bragg grating (SFBG), also called a sampled fiber Bragg grating, is a special FBG that consists of a several small FBGs placed in close proximity to one another. SFBGs have attracted much attention in recent years with the discovery of techniques allowing the creation of equivalent chirp or equivalent phase shifts. The biggest advantage of an SFBG with equivalent chirp or equivalent phase shifts is the possibility to design and fabricate gratings with greatly varying phase and amplitude responses by adjusting the spatial profile of the superstructure. The realization of SFBGs with equivalent chirp or equivalent phase shifts requires only sub-millimeter precision. This is a relief from the sub-micron precision required by traditional approaches.
In this thesis, the mathematical modeling of FBGs and SFBGs is reviewed. The use of SFBGs for various applications in photonic microwave signal processing is considered.
Four main topics are presented in this thesis. The first topic is the use of SFBG as a photonic true-time delay (TTD) beamformer for phased array antennas (PAAs).
The second topic addresses non-linearities in the group delay response of an SFBG with equivalent chirp in its sampling period. An SFBG with an equivalent chirp using only a linear chirp coefficient may yield a group delay response that deviates from the linear response required by a TTD beamformer. In the thesis, a technique to improve the linearity of the group delay response is proposed and an adaptive algorithm to find the optimal linear and non-linear chirp coefficients to produce the best linear group delay response is described. Since no closed-form solution exists to represent the amplitude and phase responses of an SFBG, we rely on a Fourier transform analogy under a weak grating approximation as a starting point in the design of an SFBG. Simulations are then used to refine the response of the SFBG. The algorithm proposed provides an optimal set of chirp coefficients that minimizes the error in the group delay response. Four gratings are fabricated using the optimized chirp coefficients and their application in a TTD PAA system is discussed.
The third topic discusses the use of an SFBG with equivalent phase shifts in its sampling period as a means to realize optical single sideband (SSB) modulation. SSB modulation eliminates the power penalty caused by chromatic dispersion experienced by an optical signal traveling through a long length of optical fiber. By introducing two π phase shifts through equivalent sampling to the SFBG, two ultra-narrow transmission bands are created in the grating stop band of the +/- 1st spectral orders. In the proposed system, a double-sideband plus carrier (DSB+C) modulated optical signal is sent to the input of an optical SSB filter based on the equivalent phase-shift SFBG in order to select the optical carrier and a single sideband, effectively blocking one sideband from propagating.
Finally, the fourth topic focuses on the implementation of a photonic microwave bandpass filter based on an SFBG with equivalent chirp. Photonic microwave filters are used to process microwave signals in the optical domain. By using a technique called phase-modulation to intensity-modulation (PM-IM) conversion, a two-tap delay line filter is created with one negative tap. A single SFBG with a chirp in its sampling period is used as a means to achieve the PM-IM conversion for the two taps. Two phase modulated optical carriers are used to generate the two taps, each entering a different port of the SFBG and thus experiencing an opposite dispersion value. The two optical signals are then recombined before being sent to a photodetector (PD) where the filtered microwave signal is recovered.
|
17 |
RFI Mitigation and Discrete Digital Signal Processing RFSoC Algorithm Implementations for Radio Astronomy and Wideband Communication SystemsWard, Devon Christopher 28 March 2024 (has links) (PDF)
Due to the massive increase of active transmitters broadcasting over wideband frequencies, such as 5G wireless systems, LEO/MEO satellites, satellite constellations, and the increase of IoT devices in the average home, the radio frequency spectrum is becoming more and more congested by interference. Passive receivers face additional challenges due to the growing use of wideband frequency transmissions aimed at boosting communication system throughput. As a result, passive receivers must adopt more robust and intricate techniques to mitigate radio frequency interference. A proposed RFI removal system, known as the true time delay Hadamard projection algorithm, has been introduced in previous work to eliminate a single RFI source while preserving a narrowband signal of interest. An RF frontend is developed to assess the effectiveness of the Hadamard projection algorithm implemented on an RFSoC ZCU216. Additionally, the TTD Hadamard projection algorithm is expanded to enable the cancellation of multiple RFI sources rather than just a single source for a uniform linear array and a uniform rectangular array. Over-the-air tests are conducted to verify the performance of the interference cancellation algorithms and demonstrate the algorithms' ability to preserve the signals of interest while removing the wideband interference. Multiple algorithms are proposed to estimate the time delays used by the interference cancellation algorithm to effectively eliminate wideband interference. These algorithms address diverse scenarios encompassing interference sources ranging from strong to weak SNR. Detailed reports of algorithm performance provide insights into their effectiveness and suitability across specific interference conditions.
|
18 |
Novel Multicore Optical Fibers for Signal Distribution and ProcessingUreña Gisbert, Mario 07 September 2023 (has links)
[ES] Las fibras de multiplexación por división espacial surgieron en la última década como solución al cuello de botella en la capacidad en las redes de comunicación de fibra óptica monomodo. Utilizan el espacio, la última técnica de multiplexación en comunicaciones ópticas, para aumentar la capacidad total en comunicaciones digitales al tiempo que reducen las necesidades de espacio. Las fibras multinúcleo, un tipo de fibras de multiplexación por división espacial compuestas por varios núcleos individuales dentro de la misma cubierta, son prometedoras para las comunicaciones de largo alcance por su compatibilidad inmediata con las redes de fibra actuales. Además, las fibras multinúcleo han despertado interés en otros campos de aplicación, como las interconexiones de centros de datos, las comunicaciones cuánticas, las redes de acceso radio y la Fotónica de Microondas. Además, estas fibras presentan un gran potencial no sólo para la distribución de señales, sino también para su procesado. Las funcionalidades de procesado de señal pueden beneficiarse significativamente del uso de estas fibras en términos de compacidad y peso, garantizando al mismo tiempo versatilidad, reconfigurabilidad y rendimiento estable de banda ancha.
En esta Tesis, proponemos la explotación del paralelismo inherente que se encuentra en las fibras multinúcleo para implementar el procesado distribuido de señales ópticas y de microondas. En primer lugar, estudiamos la realización de un componente óptico clave en el procesado de señales en Fotónica de Microondas, la línea de retardo en tiempo real muestreada, con fibras multinúcleo heterogéneas. Esto comprende la validación del rendimiento de una fibra heterogénea de 7 núcleos previamente fabricada, la demostración experimental de las funcionalidades de procesado de señales de microondas; incluyendo el filtrado de señales, la conformación óptica de haces y la generación de formas de onda arbitrarias; y el diseño y fabricación de una fibra heterogénea de 19 núcleos que se comporta como una línea de retardo en tiempo real sintonizable. Esta fibra se fabricó escalando 3 preformas diferentes, cada una con un perfil de índice refractivo específico, para obtener núcleos con unas características de propagación determinadas. Por último, proponemos diferentes diseños de fibras multinúcleo heterogéneas específicos para aplicaciones novedosas de distribución y procesado de señales ópticas, incluyendo la distribución de claves cuánticas, la compensación paralela de la dispersión cromática y los efectos Talbot temporales paralelos. / [CA] Les fibres de multiplexació per divisió espacial van sorgir en la darrera dècada per a solucionar el coll de botella en la capacitat de les xarxes de comunicació de fibra òptica monomode. Utilitzen l'espai, l'última tècnica de multiplexació en comunicacions òptiques, per a incrementar la capacitat total en comunicacions digitals al mateix temps que redueixen les necessitats espacials. Les fibres multinucli, un tipus de fibres de multiplexació per divisió espacial compostes per diversos nuclis individuals situats dins la mateixa coberta, són prometedores per a les comunicacions de llarg abast per la immediata compatibilitat amb les xarxes de fibra òptica actuals. Per aquest motiu, les fibres multinucli han despertat interès en altres àmbits d'aplicació, com les interconnexions de centres de dades, les comunicacions quàntiques, les xarxes d'accés radio i la Fotònica de Microones. A més, aquestes fibres presenten un gran potencial no només per a la distribució de senyals, sinó també per al seu processament. Les funcionalitats de processament de senyals poden beneficiar-se significativament del seu ús en relació a la compacitat i al pes, mentre garanteixen versatilitat, reconfigurabilitat i rendiment estable de banda ampla.
En aquesta Tesi, proposem l'explotació del paral·lelisme inherent de les fibres multinucli per a implementar processament distribuït de senyals òptiques i de microones. En primer lloc, estudiem la realització d'un component òptic clau en el processament de senyals en la Fotònica de Microones, la línia de retard en temps real mostrejada, amb fibres multinucli heterogènies. Això comprèn la validació del rendiment d'una fibra de heterogènia 7 nuclis fabricada prèviament, la demostració experimental de les funcionalitats de processament de senyals de microones sobre aquesta mateixa fibra; la qual cosa inclou el filtrat de senyals, la conformació òptica de feixos i la generació de formes d'ona arbitràries; i el disseny i fabricació d'una fibra heterogènia de 19 nuclis que es comporta com una línia de retard en temps real sintonitzable. Aquesta fibra es va fabricar escalant 3 preformes diferents, cadascuna amb un perfil d'índex refractiu específic, per obtindre nuclis amb característiques de propagació determinades. Per últim, proposem diversos dissenys específics de fibres multinucli heterogènies per a aplicacions innovadores de distribució i processament de senyals òptiques, incloent la distribució de claus quàntiques, la compensació paral·lela de la dispersió cromàtica i els efectes Talbot temporals en paral·lel. / [EN] Space-division multiplexing fibers emerged in the last decade as a solution to the capacity bottleneck in single-mode optical fiber communication networks. They utilize space, the last multiplexing technique in optical communications, to increase the total capacity in digital communications whilst reducing space needs. Multicore fibers, a type of space-division multiplexing fibers comprised of multiple individual cores within the same cladding, are promising for long-reach communications because of their immediate compatibility with current fiber networks. Moreover, multicore fibers have raised interest in other fields of application such as data-center interconnects, quantum communications, radio access networks and Microwave Photonics. Apart from that, these fibers exhibit great potential not only for signal distribution but also for signal processing. Signal processing functionalities can benefit significantly from using these fibers in terms of compactness and weight, while assuring broadband versatility, reconfigurability, and performance stability.
In this Thesis, we propose the exploitation of the inherent parallelism found in multicore fibers to implement distributed signal processing for optical and microwave signals. First, we study the realization of a key optical component in Microwave Photonics signal processing, the sampled true-time delay line, with heterogeneous multicore fibers. This comprises the performance validation of a previously fabricated heterogeneous 7-core fiber, the experimental demonstration of microwave signal processing functionalities including signal filtering, optical beamforming, and arbitrary waveform generation, and the design and fabrication of a heterogeneous 19-core fiber that behaves as a tunable true-time delay line. This fiber was fabricated by scaling down 3 different preforms, each with a specific refractive index profile, with a different ratio to obtain cores with determined propagation characteristics. Lastly, we propose different custom heterogeneous multicore fiber designs for novel optical signal distribution and processing applications, including quantum key distribution, parallel chromatic dispersion compensation and parallel temporal Talbot effects. / Ureña Gisbert, M. (2023). Novel Multicore Optical Fibers for Signal Distribution and Processing [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/196862
|
19 |
Generation of Modulated Microwave Signals using Optical Techniques for Onboard Spacecraft ApplicationsYogesh Prasad, K R January 2013 (has links) (PDF)
This thesis deals with optical synthesis of unmodulated and modulated microwave signals. Generation of microwave signals based on optical heterodyning is discussed in detail.
The effect of phase noise of laser on heterodyned output has been studied for different phase noise profiles. Towards this, we propose a generic algorithm to numerically model the linewidth broadening of a laser due to phase noise. Generation of microwave signals is demonstrated practically by conducting an optical heterodyning experiment. Signals ranging in frequency from 12.5 MHz to 27 GHz have been generated.
Limitations of optical heterodyning based approach in terms of phase noise performance and frequency stability are discussed and practically demonstrated. A hardware-efficient Optical Phase Locked Loop (OPLL) is proposed to overcome these issues. Phase noise tracking performance of the proposed OPLL has been experimentally demonstrated. Phase noise values as low as -105 dBc/Hz at 10 KHz offset have been achieved.
Optical modulators, owing to their extremely low electro-optic response time, can support high frequency modulating signals. This makes them highly attractive in comparison to their microwave counterparts. In this thesis, we propose techniques to generate microwave signals modulated at very high bit rates by down-converting the corresponding modulated optical signals to microwave domain. Down-conversion required for this process is achieved by optical heterodyning. The proposed concept has been theoretically analyzed, simulated and experimentally validated. Amplitude Modulated and ASK modulated microwave signals have been generated as Proof-of-Concept.
Limitations posed by OPLL in generation of angle modulated microwave signals by optical heterodyning have been brought out. Schemes overcoming these limitations have been proposed towards generation of BPSK and QPSK modulated microwave signals.
Integrated Optics (IO) technology has been studied as a means of implementation of the proposed concepts. IO components like Sinusoidal bends, Y-branch splitters and Electro-Optic-Modulators (EOMs) have been designed towards optical synthesis of modulated microwave signals. Propagation of modulated optical signal through these IO components has also been studied.
An all-optic scheme based on Optical Beam Forming is proposed for transmission of QPSK modulated signal. Limitation of phase-shifting based approach, in terms of beam-squint, has been brought out. True-Time-Delay based approach has been proposed for applications demanding wide instantaneous bandwidth to avoid beam-squint.
Algorithms / numerical methods required for analyses and simulations associated with the above-mentioned tasks have been evolved.
This study is envisaged to provide useful insight into the realization of high-speed, compact, light-weight data transmitting systems based on Integrated Optics for future onboard spacecraft applications. This work, we believe, is a step towards realization of an Integrated Optic System-on-Chip solution for specific microwave data transmission applications.
|
20 |
Photonic Vector Processing Techniques for Radiofrequency SignalsPiqueras Ruipérez, Miguel Ángel 02 May 2016 (has links)
[EN] The processing of radiofrequency signals using photonics means is a discipline that appeared almost at the same time as the laser and the optical fibre. Photonics offers the capability of managing broadband radiofrequency (RF) signals thanks to its low transmission attenuation, a variety of linear and non-linear phenomena and, recently, the potential to implement integrated photonic subsystems. These features open the door for the implementation of multiple functionalities including optical transportation, up and down frequency conversion, optical RF filtering, signal multiplexing, de-multiplexing, routing and switching, optical sampling, tone generation, delay control, beamforming and photonic generation of digital modulations, and even a combination of several of these functionalities. This thesis is focused on the application of vector processing in the optical domain to radiofrequency signals in two fields of application: optical beamforming, and photonic vector modulation and demodulation of digital quadrature amplitude modulations. The photonic vector control enables to adjust the amplitude and phase of the radiofrequency signals in the optical domain, which is the fundamental processing that is required in different applications such as beamforming networks for direct radiating array (DRA) antennas and multilevel quadrature modulation.
The work described in this thesis include different techniques for implementing a photonic version of beamforming networks for direct radiating arrays (DRA) known as optical beamforming networks (OBFN), with the objectives of providing a precise control in terrestrial applications of broadband signals at very high frequencies above 40 GHz in communication antennas, optimizing the size and mass when compared with the electrical counterparts in space application, and presenting new photonic-based OBFN functionalities. Thus, two families of OBFNs are studied: fibre-based true time delay architectures and integrated networks. The first allow the control of broadband signals using dispersive optical fibres with wavelength division multiplexing techniques and advanced functionalities such as direction of arrival estimation in receiving architectures. In the second, passive OBFNs based on monolithically-integrated Optical Butler Matrices are studied, including an ultra-compact solution using optical heterodyne techniques in silicon-on-insulator (SOI) material, and an alternative implementing a homodyne counterpart in germanium doped silica material.
In this thesis, the application of photonic vector processing to the generation of quadrature digital modulations has also been investigated. Multilevel modulations are based on encoding digital information in discrete states of phase and amplitude of an electrical signal to enhance spectral efficiency, as for instance, in quadrature modulation. The signal process required for generating and demodulating this kind of signals involves vector processing (phase and amplitude control) and frequency conversion. Unlike the common electronic or digital implementation, in this thesis, different photonic based signal processing techniques are studied to produce digital modulation (photonic vector modulation, PVM) and demodulation (PVdM). These techniques are of particular interest in the case of broadband signals where the data rate required to be managed is in the order of gigabit per second, for applications like wireless backhauling of metro optical networks (known as fibre-to-the-air). The techniques described use optical dispersion in optical fibres, wavelength division multiplexing and photonic up/down conversion. Additionally, an optical heterodyne solution implemented monolithically in a photonic integrated circuit (PIC) is also described. / [ES] El procesamiento de señales de radiofrecuencia (RF) utilizando medios fotónicos es una disciplina que apareció casi al mismo tiempo que el láser y la fibra óptica. La fotónica ofrece la capacidad de manipular señales de radiofrecuencia de banda ancha, una baja atenuación, procesados basados en una amplia variedad de fenómenos lineales y no lineales y, recientemente, el potencial para implementar subsistemas fotónicos integrados. Estas características ofrecen un gran potencial para la implementación de múltiples funcionalidades incluyendo transporte óptico, conversión de frecuencia, filtrado óptico de RF, multiplexación y demultiplexación de señales, encaminamiento y conmutación, muestreo óptico, generación de tonos, líneas de retardo, conformación de haz en agrupaciones de antenas o generación fotónica de modulaciones digitales, e incluso una combinación de varias de estas funcionalidades. Esta tesis se centra en la aplicación del procesamiento vectorial en el dominio óptico de señales de radiofrecuencia en dos campos de aplicación: la conformación óptica de haces y la modulación y demodulación vectorial fotónica de señales digitales en cuadratura. El control fotónico vectorial permite manipular la amplitud y fase de las señales de radiofrecuencia en el dominio óptico, que es el procesamiento fundamental que se requiere en diferentes aplicaciones tales como las redes de conformación de haces para agrupaciones de antenas y en la modulación en cuadratura.
El trabajo descrito en esta tesis incluye diferentes técnicas para implementar una versión fotónica de las redes de conformación de haces de en agrupaciones de antenas, conocidas como redes ópticas de conformación de haces (OBFN). Se estudian dos familias de redes: arquitecturas de retardo en fibra óptica y arquitecturas integradas. Las primeras permiten el control de señales de banda ancha utilizando fibras ópticas dispersivas con técnicas de multiplexado por división de longitud de onda y funcionalidades avanzadas tales como la estimación del ángulo de llegada de la señal en la antena receptora. En la segunda, se estudian redes de conformación pasivas basadas en Matrices de Butler ópticas integradas, incluyendo una solución ultra-compacta utilizando técnicas ópticas heterodinas en silicio sobre aislante (SOI), y una alternativa homodina en sílice dopado con germanio.
En esta tesis, también se han investigado técnicas de procesado vectorial fotónico para la generación de modulaciones digitales en cuadratura. Las modulaciones multinivel codifican la información digital en estados discretos de fase y amplitud de una señal eléctrica para aumentar su eficiencia espectral, como por ejemplo la modulación en cuadratura. El procesado necesario para generar y demodular este tipo de señales implica el procesamiento vectorial (control de amplitud y fase) y la conversión de frecuencia. A diferencia de la implementación electrónica o digital convencional, en esta tesis se estudian diferentes técnicas de procesado fotónico tanto para la generación de modulaciones digitales (modulación vectorial fotónica, PVM) como para su demodulación (PVdM). Esto es de particular interés en el caso de señales de banda ancha, donde la velocidad de datos requerida es del orden de gigabits por segundo, para aplicaciones como backhaul inalámbrico de redes ópticas metropolitanas (conocida como fibra hasta el aire). Las técnicas descritas se basan en explotar la dispersión cromática de la fibra óptica, la multiplexación por división de longitud de onda y la conversión en frecuencia. Además, se presenta una solución heterodina implementada monolíticamente en un circuito integrado fotónico (PIC). / [CAT] El processament de senyals de radiofreqüència (RF) utilitzant mitjans fotònics és una disciplina que va aparèixer gairebé al mateix temps que el làser i la fibra òptica. La fotònica ofereix la capacitat de manipular senyals de radiofreqüència de banda ampla, una baixa atenuació, processats basats en una àmplia varietat de fenòmens lineals i no lineals i, recentment, el potencial per implementar subsistemes fotònics integrats. Aquestes característiques ofereixen un gran potencial per a la implementació de múltiples funcionalitats incloent transport òptic, conversió de freqüència, filtrat òptic de RF, multiplexació i demultiplexació de senyals, encaminament i commutació, mostreig òptic, generació de tons, línies de retard, conformació de feix en agrupacions d'antenes i la generació fotònica de modulacions digitals, i fins i tot una combinació de diverses d'aquestes funcionalitats. Aquesta tesi es centra en l'aplicació del processament vectorial en el domini òptic de senyals de radiofreqüència en dos camps d'aplicació: la conformació òptica de feixos i la modulació i demodulació vectorial fotònica de senyals digitals en quadratura. El control fotònic vectorial permet manipular l'amplitud i la fase dels senyals de radiofreqüència en el domini òptic, que és el processament fonamental que es requereix en diferents aplicacions com ara les xarxes de conformació de feixos per agrupacions d'antenes i en modulació multinivell.
El treball descrit en aquesta tesi inclou diferents tècniques per implementar una versió fotònica de les xarxes de conformació de feixos en agrupacions d'antenes, conegudes com a xarxes òptiques de conformació de feixos (OBFN), amb els objectius de proporcionar un control precís en aplicacions terrestres de senyals de banda ampla a freqüències molt altes per sobre de 40 GHz en antenes de comunicacions, optimitzant la mida i el pes quan es compara amb els homòlegs elèctrics en aplicacions espacials, i la presentació de noves funcionalitats fotòniques per agrupacions d'antenes. Per tant, s'estudien dues famílies de OBFNs: arquitectures de retard en fibra òptica i arquitectures integrades. Les primeres permeten el control de senyals de banda ampla utilitzant fibres òptiques dispersives amb tècniques de multiplexació per divisió en longitud d'ona i funcionalitats avançades com ara l'estimació de l'angle d'arribada del senyal a l'antena receptora. A la segona, s'estudien xarxes de conformació passives basades en Matrius de Butler òptiques en fotònica integrada, incloent una solució ultra-compacta utilitzant tècniques òptiques heterodinas en silici sobre aïllant (SOI), i una alternativa homodina en sílice dopat amb germani.
D'altra banda, també s'ha investigat en aquesta tesi tècniques de processament vectorial fotònic per a la generació de modulacions digitals en quadratura. Les modulacions multinivell codifiquen la informació digital en estats discrets de fase i amplitud d'un senyal elèctric per augmentar la seva eficiència espectral, com ara la modulació en quadratura. El processat necessari per generar i desmodular aquest tipus de senyals implica el processament vectorial (control d'amplitud i fase) i la conversió de freqüència. A diferència de la implementació electrònica o digital convencional, en aquesta tesi s'estudien diferents tècniques de processament fotònic tant per a la generació de modulacions digitals (modulació vectorial fotònica, PVM) com per la seva demodulació (PVdM). Això és de particular interès en el cas de senyals de banda ampla, on la velocitat de dades requerida és de l'ordre de gigabits per segon, per a aplicacions com backhaul sense fils de xarxes òptiques metropolitanes (coneguda com fibra fins l'aire). Les tècniques descrites es basen en explotar la dispersió cromàtica de la fibra òptica, la multiplexació per divisió en longitud d'ona i la conversió en freqüència. A més, es prese / Piqueras Ruipérez, MÁ. (2016). Photonic Vector Processing Techniques for Radiofrequency Signals [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/63264 / TESIS
|
Page generated in 0.0485 seconds