In this thesis I address the topic of a non-visual approach for interaction on mobile,as an alternative to their existing visual displays in situations where hands free usageof the device is preferred. The current technology will be examined through existingwork with special attention to its limitations, which user groups are currently using anysort of speech recognition or voice command functions and look at in which scenariosare these the most used and most desired. Then I will examine through interviews whypeople trust or distrust voice interactions and how they feel about the possibilities andlimitations of the technology at hand, how individual users use this currently and wheredo they see the technology in the future. After this I will develop an alternative voiceinteraction concept, and validate it through a set of workshops.

Various convex analysis of mixtures (CAM) based algorithms have been developed to address real world blind source separation (BSS) problems and proven to have good performances in previous papers. This thesis reported the implementation of a comprehensive software CAM-Java, which contains three different CAM based algorithms, CAM compartment modeling (CAM-CM), CAM non-negative independent component analysis (CAM-nICA), and CAM non-negative well-grounded component analysis (CAM-nWCA). The implementation works include: translation of MATLAB coded algorithms to open-sourced R alternatives. As well as building a user friendly graphic user interface (GUI) to integrate three algorithms together, which is accomplished by adopting Java Swing API. In order to combine R and Java coded modules, an open-sourced project RCaller is used to handle the establishment of low level connection between R and Java environment. In addition, specific R scripts and Java classes are also implemented to accomplish the tasks of passing parameters and input data from Java to R, run R scripts in Java environment, read R results back to Java, display R generated figures, and so on. Furthermore, system stream redirection and multi-threads techniques are used to build a simple R messages displaying window in Java built GUI. The final version of the software runs smoothly and stable, and the CAM-CM results on both simulated and real DCE-MRI data are quite close to the original MATLAB version algorithms. The whole GUI based open-sourced software is easy to use, and can be freely distributed among the communities. Technical details in both R and Java modules implementation are also discussed, which presents some good examples of how to develop software with both complicate and up to date algorithms, as well as decent and user friendly GUI in the scientific or engineering research fields. / Master of Science

[pt] Com a incorporação de recursos computacionais aos elementos físicos, a computação evolui para a ubiquidade e está presente nos elementos do ambiente físico. Casas, móveis e objetos do dia-a-dia, isto é, o ambiente que nos cerca, são as novas interfaces com as quais as pessoas interagem para colaborar e se informar. Essas novas interfaces implicam em um novo paradigma de interação, ainda pouco conhecido e explorado, como é o caso das Interfaces Tangíveis (Tangible User Interfaces - TUIs), que usam artefatos físicos para representação e controle de informações digitais. Desenvolver Interfaces Tangíveis requer combinar o trabalho voltado para o concreto (forma) com a abstração característica do desenvolvimento de software (comportamento). Este trabalho propõe um método denominado Prototipação Colaborativa de Tangíveis Baseada na Engenharia Semiótica, que combina as abordagens de prototipação e da Engenharia Semiótica no projeto de interfaces tangíveis. Ao combinar estas abordagens, o método agrega os benefícios da experimentação continuada de forma estruturada proporcionada pela prototipação com as vantagens do foco na comunicabilidade da Engenharia Semiótica no projeto de tangíveis. Um estudo de caso é conduzido a fim de investigar a contribuição do método proposto para incorporação da perspectiva da Engenharia Semiótica ao projeto de interfaces tangíveis. / [en] With the embedding of computing resources into physical elements, computing is moving toward ubiquity (or pervasiveness) and is present throughout the physical environment. Homes, furniture, and everyday life objects are the interfaces with which people now interact. Such new interfaces harbinger a new interaction paradigm that is little known and exploited to date, such as Tangible User Interfaces (TUIs) that use physical artefacts for representing and manipulating digital information. Developing TUIs means acknowledging both concrete (form) and abstract (behavior) aspects of an interface. This work proposes a method called Collaborative Tangible Prototyping Based on Semiotics Engineering that combines prototyping and Semiotic Engineering approaches to tangible interfaces design. By combining these approaches, the method brings together the benefits of continued structured experimentation provided by prototyping with the advantages of a focus on communicability from Semiotic Engineering for designing tangibles. A case study is conducted to investigate whether the proposed method contributes to incorporate the Semiotic Engineering perspective in the design of tangible user interfaces.

Este trabalho relaciona elementos das áreas de Computação e Saúde para comporem a elaboração de uma metodologia para avaliação de usabilidade de sistemas de transcrição automática de laudos na área de Radiologia. Inicialmente, é apresentado um estudo realizado sobre a área de Interface do Usuário Baseada em Voz que identifica requisitos para os sistemas que trabalham com comunicação mediada por voz assim como as iniciativas no sentido de se criar uma metodologia para sua avaliação. Em seguida é realizado um estudo dos sistemas de transcrição automática de laudos, no qual os principais requisitos são caracterizados e classificados. Os dois estudos acima citados foram integrados para a elaboração de uma metodologia para a avaliação de Sistemas de Transcrição Automática de Laudos em Radiologia. A metodologia foi, então, validada previamente através de inspeções e testes de usabilidade realizados fora do ambiente hospitalar, através do uso de um sistema de transcrição automática de laudos em Radiologia. Posteriormente, a metodologia foi também aplicada a um hospital da cidade de São Paulo. Como resultado principal foi proposto um guia bastante detalhado para se avaliar os Sistemas de Transcrição Automática de Laudos em Radiologia, cada vez mais presentes em hospitais e clínicas no país, além dos relatos das experiências obtidas com a aplicação desta metodologia em um caso real. / This work combines knowledge from Computer Science and Health Science in order to propose an evaluation methodology for Automatic Transcription System of Radiology Reports. At first a study regarding a Voice User Interface is presented, this interface identifies the requirements for Spoken Language Dialogue Systems and it can also be used as a tool for an evaluation methodology. Following, a study of automatic transcription systems is presented; in this study the main requirements are listed and classified. Both studies were integrated to allow a new methodology to evaluate an Automatic Transcription System in Radiology. This methodology was previously validated through some inspections and usability tests outside the hospital environment and afterword the methodology was used in a hospital in São Paulo city. As a main result it was proposed a very detailed guide for evaluating the Automatic Transcription Systems Reports in Radiology, increasingly found in hospitals and clinics in this country, apart from reports on experiences gained in applying this methodology in a real case.

Este trabalho relaciona elementos das áreas de Computação e Saúde para comporem a elaboração de uma metodologia para avaliação de usabilidade de sistemas de transcrição automática de laudos na área de Radiologia. Inicialmente, é apresentado um estudo realizado sobre a área de Interface do Usuário Baseada em Voz que identifica requisitos para os sistemas que trabalham com comunicação mediada por voz assim como as iniciativas no sentido de se criar uma metodologia para sua avaliação. Em seguida é realizado um estudo dos sistemas de transcrição automática de laudos, no qual os principais requisitos são caracterizados e classificados. Os dois estudos acima citados foram integrados para a elaboração de uma metodologia para a avaliação de Sistemas de Transcrição Automática de Laudos em Radiologia. A metodologia foi, então, validada previamente através de inspeções e testes de usabilidade realizados fora do ambiente hospitalar, através do uso de um sistema de transcrição automática de laudos em Radiologia. Posteriormente, a metodologia foi também aplicada a um hospital da cidade de São Paulo. Como resultado principal foi proposto um guia bastante detalhado para se avaliar os Sistemas de Transcrição Automática de Laudos em Radiologia, cada vez mais presentes em hospitais e clínicas no país, além dos relatos das experiências obtidas com a aplicação desta metodologia em um caso real. / This work combines knowledge from Computer Science and Health Science in order to propose an evaluation methodology for Automatic Transcription System of Radiology Reports. At first a study regarding a Voice User Interface is presented, this interface identifies the requirements for Spoken Language Dialogue Systems and it can also be used as a tool for an evaluation methodology. Following, a study of automatic transcription systems is presented; in this study the main requirements are listed and classified. Both studies were integrated to allow a new methodology to evaluate an Automatic Transcription System in Radiology. This methodology was previously validated through some inspections and usability tests outside the hospital environment and afterword the methodology was used in a hospital in São Paulo city. As a main result it was proposed a very detailed guide for evaluating the Automatic Transcription Systems Reports in Radiology, increasingly found in hospitals and clinics in this country, apart from reports on experiences gained in applying this methodology in a real case.

<p>he focus of this research is to establish whether there is a difference in the way the genders perceive the visualization of mathematics, with specific reference to set theory. The influence of the computing experience of students on their perceptions was also investigated. Interfaces were created for the teaching of set theory for learners in the first class of secondary school. Since the mother tongue of most the pupils is Dari the interface was made available in both Dari and English. The interfaces were used to gather the data for the researc</p>

<p>he focus of this research is to establish whether there is a difference in the way the genders perceive the visualization of mathematics, with specific reference to set theory. The influence of the computing experience of students on their perceptions was also investigated. Interfaces were created for the teaching of set theory for learners in the first class of secondary school. Since the mother tongue of most the pupils is Dari the interface was made available in both Dari and English. The interfaces were used to gather the data for the researc</p>

The purpose of this qualitative case study is to evaluate an early stage survey skill developed for the social robot Furhat, and look into how the user experience (UX) and voice user interface (VUI) of that skill can be improved. Several qualitative methods have been used: expert evaluations using heuristics for human-robot interaction (HRI), user evaluations including observations and interviews, as well as a quantitative questionnaire (RoSAS – Robot Social Attribution Scale). The empirical findings have been classified into the USUS Evaluation Framework for Human-Robot Interaction. The user evaluations were performed in two modes, one group of informants talked and interacted with Furhat with the support of a graphical user interface (GUI), and the other group without the GUI. A positive user experience was identified in both modes, showing that the informants found interacting with Furhat a fun, engaging and interesting experience. The mode with the supportive GUI could be suitable in noisy environments, and for longer surveys with many response alternatives to choose from, whereas the other mode could work better for less noisy environments and for shorter surveys. General improvements that can contribute to a better user experience in both modes were found; such as having the robot adopt a more human-like character when it comes to the dialogue and the facial expressions and movements, along with addressing a number of technical and usability issues. / Syftet med den här kvalitativa fallstudien är att utvärdera en enkätskill för den sociala roboten Furhat. Förutom utvärderingen av denna skill, som är i ett tidigt skede av utvecklingen, är syftet även att undersöka hur användarupplevelsen (UX) och röstgränssnittet (VUI) kan förbättras. Olika kvalitativa metoder har använts: expertutvärderingar med heuristik för MRI (människa-robot-interaktion), användarutvärderingar bestående av observationer och intervjuer, samt ett kvantitativt frågeformulär (RoSAS – Robot Social Attribution Scale). Resultaten från dessa har placerats in i ramverket USUS Evaluation Framework for Human- Robot Interaction. Användarutvärderingarna utfördes i två olika grupper: en grupp pratade och interagerade med Furhat med stöd av ett grafiskt användargränssnitt (GUI), den andra hade inget GUI. En positiv användarupplevelse konstaterades i båda grupperna: informanterna tyckte att det var roligt, engagerande och intressant att interagera med Furhat. Att ha ett GUI som stöd kan passa bättre för bullriga miljöer och för längre enkäter med många svarsalternativ att välja bland, medan ett GUI inte behövs för lugnare miljöer och kortare enkäter. Generella förbättringar som kan bidra till att höja användarupplevelsen hittades i båda grupperna; till exempel att roboten bör agera mer människolikt när det kommer till dialogen och ansiktsuttryck och rörelser, samt att åtgärda ett antal tekniska problem och användbarhetsproblem.

Jag kommer i denna uppsats beskriva den designprocess som pågått vid skapandet av en webbaserad informationsplattform från koncept till slutprodukt. Mitt uppdrag har varit att effektivisera en webbyrås nuvarande sätt att hantera och sprida information på, som bestod av en blandning mellan digital och analog information, och skapa en ny webbaserad informationsplattform. Den nya webbaserade informationsplattformen ska kunna samla all information på en plats och skapa ett effektivare informationsutbyte mellan de anställda på företaget. Jag har använt mig av två teoretiska ramverk; Nielsens tio heuristics samt Krugs visuella design hierarki. Jag har arbetat nära beställaren för att kunna skräddarsy webbplatsen till deras behov. Resultatet efter ett omfattande arbete med designmallar och front-end kodning blev grunden för webbyråns webbaserade informationsplattform, utvecklad för att effektivisera spridningen av information på företaget. / In this essay I will describe the design process during the creation of a web-based information platform, from concept to final product. My assignment has been to take a web agency’s current way of managing and distributing information, which consisted of a mix between digital and analog information, and create a new web-based information platform. The new web-based information-platforms purpose is to gather all information in one place for easier exchange of information between employees at the company and make it more efficient. I used two theoretical frameworks as a theoretical base working on the project; Nielsen's ten heuristics and Krugs visual design hierarchy. I have worked closely with the client to customize the platform to their needs. The result after extensive work with design templates and front-end coding became the foundation for the web agency’s web-based platform, developed to distribute information more efficiently within the agency.

Masters of Science / The focus of this research is to establish whether there is a difference in the way the genders perceive the visualization of mathematics, with specific reference to set theory. The influence of the computing experience of students on their perceptions was also investigated. Interfaces were created for the teaching of set theory for learners in the first class of secondary school. Since the mother tongue of most the pupils is Dari the interface was made available in both Dari and English. The interfaces were used to gather the data for the research / South Africa