Une série de films Ti1-xAlxN (0 ≤ x ≤ 1, teneur en Al) de différentes épaisseurs (300 – 500 et ≃ 2000 nm) a été déposée par pulvérisation magnétron en atmosphère réactive sur des substrats en Si(l 00) et en acier rapide. Des indentations Vickers ont été réalisées sur les films déposés sur acier à des charges de 0,5 et 3 N. Différentes techniques d'analyse ont été utilisées pour la caractérisation structurale et microstructurale des films : diffraction des rayons X, spectroscopie d'absorption des rayons X, microscopie électronique en transmission. En DRX, la composition intermédiaire Ti0,32Al0,68N marque le passage entre la symétrie cubique observée pour les films riches en Ti (x ≤ 0,50) et la symétrie hexagonale observée pour les films riches en Al (x ≥ 0,68). Pour Ti0,32Al0,68N, DRX et EXAFS ont révélé la coexistence de domaines cubiques, dans les zones mal cristallisées, et de domaines hexagonaux, dans les zones cristallisées. La microstructure analysée en MET est colonnaire pour toute la série des films Ti1-xAlxN. L'examen des empreintes d'indentation réalisées à différentes charges montre que les couches de Ti1-xAlxN deviennent de plus en plus fragiles avec l'augmentation de la teneur en Al. Pour les films riches en Ti, la grande proportion de joints de grains permet le glissement des colonnes les unes contre les autres. Pour les films riches en Al, le nombre des fissures dans l'épaisseur augmente avec la proportion d'Al dans le film. De plus, une courbure des colonnes (constituées par des grains de symétrie hexagonale) sous la pointe de l'indenteur induit une désorientation de quelques degrés de ces cristallites autour de la direction principale de croissance. / A serie of Ti1-xAlxN films (0 ≤ x ≤ 1Al content) with different thicknesses (300 – 500 and ≃ 2000 nm) was deposited by magnetron sputtering in reactive atmosphere onto both Si(l00) and speed steel substrates. Vickers indentations were carried out on films deposited on speed steel substrate at 0.5 and 3 N load. X-ray diffraction, X-ray absorption spectroscopy and transmission electron microscopy techniques were used for the structural and microstructural characterization. In DRX, the intermediate composition Ti0.32Al0.68N marks the passage from cubic symmetry observed in Ti rich films (x ≤ 0.50) to hexagonal symmetry observed in Al rich films (x ≥ 0.68). For Ti0_32Al0.68N, DRX and EXAFS probes revealed the coexistence of cubic like-TiN areas, in the badly crystallized zones, and of hexagonal like-AlN areas, in the crystallized zones. Column-like growth for all Ti1-xAlxN films is highlighted by TEM study. The indentation prints examination, carried out at various loads, shows that the Ti1-xAlxN coatings become more and more brittle with increasing the Al content. For Ti-rich films, high grain boundaries proportion allows the columns sliding ones against the others. For Al-rich films, the number of cracks within thickness increase according to the Al content. Moreover, the bending of the columns under the indentation tip (consisted of hexagonal symmetry grains) induced few degree displacement of these crystallites around the principal growth direction.

Les composés électrochomes changent de couleur en fonction d'une tension qui leur est appliquée. La tenue en cyclage de couches minces à base de NiO, électrochrome cathodique, dépend fortement de la température et de la pression de dépôt. D’autre part la proportion de phase électrochimiquement active dépend fortement de l’épaisseur des couches. Selon le modèle proposé NiO en milieu KOH se transforme en hydroxyde de nickel Ni(OH)2 puis dans la phase de coloration en oxyhydroxyde NiOOH avant de revenir à sa forme réduite durant la phase décoloration. À la fin de ce cycle, des traces de phase colorée persistent. Nous avons développé des nouvelles méthodes numériques d’analyse des spectres d'absorption de rayons X, caractérisant la structure locale autour du nickel dans ces phases non cristallisées, afin de déterminer les concentrations des diverses espèces au cours du cycle. Aucune des méthodes habituellement pratiquées, comme la combinaison linéaire d’espèces modèles par la méthode des moindres carrés linéaire, et la méthode d’Analyse en Composantes Principales, ne sont adaptées aux cas de spectres fortement corrélés comme les oxydes-hydroxydes de nickel. Nous montrons qu’il est possible d’améliorer la méthode des moindres carrés en utilisant un algorithme original : « la méthode des Moindres Carrés Linéaire Progressive ». La base de cette méthode est fondée sur l’étude statistique des erreurs et corrélations. Ce travail a permis de valider le modèle électrochimique et d’évaluer pour la première fois la concentration en NiOOH dans la phase réduite, signature de l'irréversibilité. Seule, la présence avant cyclage de Ni(OH)2 dans les films de NiO n'a pu être expliquée / Electrochromic materials change their color versus an applied electric voltage. The electrochemical study of NiO thin films, which are cathodic electromic materials, shows an important oxidationreduction cycles lifetime dependance on thin films deposition temperature and pressure. The proportion of electrochemically active material depends on the film thickness. The proposed model suggests that in KOH NiO is transformed first to nickel hydroxide Ni(OH)2, and to nickel oxihydroxide in the coloration process, before returning to Ni(OH)2 in the decoloration step. At the end of the cycle, traces of the colored phase are still observed. We have developed a new X-Ray absorption spectroscopy numerical analysis method in order to characterize the concentration of each species present in these non crystalline materials. Mixed Ni oxides and hydroxides XAS spectra are highly correlated and Linear Least Squares and Principal Component Analysis methods proved to be totally inefficient. In order to improve the linear least squares method, we have developed a home-made algorithm named « Progressive Linear Least Squares method ». This method is based on the use of statistical errors and correlations evaluation of the spectra. It was then possible to valid the electrochemical model and to evaluate for the first time the concentration of residual NiOOH in the reduced thin film phases, related to the irreversibility of the electrochromic process. However, we were unable to explain the presence of a small amount of de Ni(OH)2 in the NiO films prepared at room temperature, prior to any electrochemical treatment

Nanotechnology offers a great potential do design fertilizers with unique properties capable to boost the plant productivity. However, the nanoparticles environmental fate and their toxic responses still need to be deeply investigated to their safe use. This study aims to investigate the effect of copper oxide (nCuO) and magnetite nanoparticles (nFe3O4) on the germination and seedling development of Phaseolus vulgaris L. Seeds were treated in nanoparticles dispersions in a wide range of concentrations (1, 10, 100 and 1 000 mg L-1) and incubated in a germination chamber during 5 days. Different sized nCuO (25, 40 and <80 nm) and polyethylene glycol (PEG) coated nFe3O4 were evaluated. Although both nCuO and nFe3O4 treatments did not affected the germination rate, seedling weight gain was promoted by 40 nm CuO at 100 mg Cu L-1 and inhibited by 1 000 mg Cu L-1 of 25 nm CuO and positive control (CuSO4). Among the tested nCuO, the higher chemical reactivity was found for the 25 nm CuO, and this may partially explain the observed deleterious effects. Seeds treated in nFe3O4-PEG at 1 000 mg Fe L-1 increased radicle elongation compared to the negative control (water), while Fe2+/Fe3+ (aq) (positive control) and bare nFe3O4 at 1 000 mg Fe L-1 treatments reduced the radicle of the seedlings. The growth promoted by the PEG-coated nanoparticles can be justified by the higher water uptake induced by the PEG, and also by its lower chemical reactivity compared to the bare nanoparticles. This was reinforced by enzymatic assays since nFe3O4-PEG treatment was also the least harmful to the alpha-amylase activity. X-ray fluorescence spectroscopy (XRF) showed that most of the Cu and Fe incorporated by the seeds remained in the seed coat, specially in the hilum region, and X-ray tomography indicated that Fe3O4-PEG penetrated in this structure. X-ray absorption spectroscopy (XAS) unraveled that the Cu and Fe chemical environment of the nCuO and nFe3O4-PEG treated seeds persisted mostly in its primitive form. These results contribute to the understanding of how nCuO, nFe3O4 and nFe3O4-PEG interact with common bean seeds and seedlings and highlights its potential use in seed priming / A nanotecnologia oferece um grande potencial para o desenvolvimento de fertilizantes com propriedades únicas, capazes de impulsionar a produtividade das plantas. Contudo, o destino ambiental e os efeitos tóxicos das nanopartículas ainda necessitam ser profundamente investigados para o seu uso seguro. Este estudo visa investigar o efeito das nanopartículas de óxido de cobre (nCuO) e magnetita (nFe3O4) na germinação e desenvolvimento das plântulas de Phaseolus vulgaris L. As sementes foram tratadas em dispersões de nanopartículas em diversas concentrações (1, 10, 100 and 1 000 mg L-1) e incubadas em uma câmara de germinação durante 5 dias. Diferentes tamanhos de nCuO (25, 40 e <80 nm) e nFe3O4 recoberta com polietileno glicol (PEG) e foram avaliados. Embora ambos tratamentos de nCuO e nFe3O4 não afetaram a taxa de germinação, o ganho de massa das plântulas foi promovido pela nCuO de 40 nm à 100 mg Cu L-1 e inibido pelos tratamentos de nCuO de 25 nm e controle positivo (CuSO4) à 1 000 mg Cu L-1. Dentre as nCuO testadas, a maior reatividade química foi encontrada para a nCuO de 25 nm, e isso pode explicar parcialmente os efeitos deletérios desta nanopartícula. Sementes tratadas com nFe3O4-PEG à 1 000 mg Fe L-1 aumentaram o alongamento das radículas em comparação ao controle negativo (água), enquanto que os tratamentos Fe2+/Fe3+ (aq) (controle positivo) e nFe3O4 sem recobrimento à 1 000 mg Fe L-1 reduziram as radículas das plântulas. O crescimento promovido pelas nanopartículas recobertas com PEG pode ser justificado pela maior absorção de água induzido pelo PEG, e também pela sua baixa reatividade química comparada às nanopartículas sem recobrimento. Isso foi reforçado por ensaios enzimáticos uma vez que o tratamento de nFe3O4-PEG foi também o menos prejudicial à atividade da alfa-amilase. A espectroscopia de fluorescência de raios-X (XRF) mostrou que a maior parte do Cu e do Fe incorporados pelas sementes permaneceu no tegumento, especialmente na região do hilo, e a tomografia de raios-X indicou que nFe3O4-PEG penetrou nesta estrutura. A espectroscopia de absorção de raios-X (XAS) revelou que o ambiente químico do Cu e do Fe das sementes tratadas com nCuO e nFe3O4-PEG persistiram majoritariamente em sua forma primitiva. Estes resultados contribuem para o entendimento de como nCuO, nFe3O4 e nFe3O4-PEG interagem com sementes de feijão e destaca seu potencial uso no tratamento de sementes

O titanato e zirconato de chumbo \'PB\'(\'ZR\'1-y\'TI\'y)\'O IND.3\' é um material ferroelétrico de estrutura perovskita que tem sido aplicado como transdutores, amplificadores, sensores piezoelétricos, piroelétricos e memórias ferroelétricas. É bem estabelecido que a incorporação de íons de \'LA POT.3+\' ou \'BA POT.2+\' nos sítios ocupados pelo \'PB\' no sistema \'PB\'(\'ZR\'1-y\'TI\'y)\'O\' (PZT), formando os sistemas \'PB\'1-x\'LA\'x\'ZR\'1-y\'TI\'y\'O IND.3\' (PLZT) e \'PB\'1-x\'BA\'x\'ZR\'1-y\'TI\'y\'O IND.3\' (PBZT), provoca mudanças significativas nas suas propriedades. No entanto, poucos trabalhos tem sido dedicados a esses sistemas contendo altas concentrações de \'TI\', principalmente no que se refere à estrutura desses materiais. Assim, este trabalho teve por objetivo analisar as propriedades estruturais e suas correlações com as propriedades dielétricas dos sistemas \'PB\'1-x\'LA\'x\'ZR\'0,40\'TI\'0,60\'O IND.3\' (PLZT100x) e \'PB\'1-x\'BA\'x\'ZR\'0,40\'TI\'0,60\'O IND.3\' (PBZT100x) em função da composição e da temperatura. Foram preparadas amostras cerâmicas por meio de sinterização convencional com x variando entre 0,05 e 0,21 para o sistema PLZT e entre 0,10 e 0,50 para o sistema PBZT. Em relação à estrutura a longa distância, medidas de difração de raios X mostraram uma diminuição no grau de tetragonalidade com o aumento da concentração dos cátions substituintes, que foi atribuída à formação de vacâncias no sítio A (caso do \'LA\') e diferença entre o raio iônico (caso do \'BA\'). Estas alterações estruturais em função da composição foram também responsáveis pelo aumento do grau de difusidade das curvas de permissividade dielétrica e pela observação de um estado ferroelétrico relaxor nas amostras contendo altas concentrações de \'LA\' e \'BA\'. Em relação à estrutural local, os resultados obtidos através da técnica de espectroscopia de absorção de raios X (XAS) nas bordas \'K\' do \'TI\' e LIII do \'PB\' mostraram que a incorporação de átomos de \'LA\' ou \'BA\' à estrutura do PZT leva a uma redução no deslocamento do átomo de \'TI\' em relação ao centro do octaedro \'TI\'O IND.6\' e mudanças na ordem local do átomo de \'PB\'. No que tange as composições contendo 21% at. de \'LA\' e 50% at. de \'BA\', diferentemente dos resultados de DRX que mostraram uma simetria cúbica, a técnica de XAS mostrou uma simetria local tetragonal. Em bom acordo com os resultados obtidos pela técnica de espectroscopia Raman, espectros EXAFS medidos em altas temperaturas mostraram também que a estrutura local não é compatível com uma estrutura de simetria cúbica. Espectros XANES medidos na borda \'K\' do oxigênio revelaram uma redução no grau de hibridização entre os estados 2p do \'O\' com 6sp do \'PB\' à medida que a concentração de \'LA\' ou \'BA\' aumenta, que estaria relacionada com o surgimento de comportamento relaxor. Amostras cerâmicas densas nanoestruturadas de composição PZT, PLZT11 e PBZT10 foram preparadas pelo método de spark plasma sintering (SPS) a fim de analisar a influência do tamanho de grão. Foi verificado que as amostras sinterizadas por SPS apresentam tamanho de grão em torno de 60 nm. A caracterização dielétrica destas amostras mostra que a redução do tamanho de grão causa uma redução no valor de máximo da permissividade dielétrica e características difusas da permissividade em função da temperatura devido ao aumento das regiões de contorno de grão. / Lead titanate zirconate (\'PB\'(\'ZR\'1-x\'TI\'x)\'O IND.3\') are ferroelectric materials with perovskite structure which has been used as transducers, capacitors, piezoelectric and pyroelectric sensors and ferroelectric memories. The substitution of \'PB POT.+2\' ions by \'LA POT.+3\' or \'BA POT.+2\' ions in the \'PB\'(\'ZR\'1-x\'TI\'x)\'O IND.3\' (PZT) system, which leads to the formation of the \'PB\'1-x\'LA\'x\'ZR\'1-y\'TI\'y\'O IND.3\' (PLZT) and the \'PB\'1-x\'BA\'x\'ZR\'1-y\'TI\'y\'O IND.3\' (PBZT) systems, induces several changes in the electric and structural properties of these materials. However, PLZT or PBZT systems based on \'TI\'-rich compositions have not been thoroughly investigated and the literature contains few reports concerning their structure. Thus, the main objectives of this doctoral thesis were the synthesis and structural characterization of \'PB\'1-x\'R\'x\'ZR\'0.40\'TI\'0.60\'O IND.3\' ferroelectric ceramic samples, with R = \'BA\' and \'LA\' and x between 0.00 to 0.50 (PLZT100x and PBZT100x). The characterization with X-ray diffraction technique of these samples showed a decrease of the tetragonality degree with increase of the doping cation concentration, which was related to the appearance of defects caused by the incorporation of \'LA\' or \'BA\' cations. These structural modifications were also responsible by the increase of the diffuseness at the dielectric permittivity and a relaxor behavior as a function of the \'LA\' or \'BA\' concentration. Concerning the local structure, XANES spectra in the absorption edge of various elements in PLZT and PBZT samples were performed. In the cases of \'TI\' \'K\'-edge absorption, the doping of \'LA\' and \'BA\' atoms in the PZT structure leads to a reduction of the displacement of \'TI\' atom in the center of the \'TI\'O IND.6\' octahedron. However, even when the crystal structure is cubic, a local octahedron distortion remains. EXAFS measurements in \'PB\' LIII-edge and \'ZR\' \'K\'-edge were performed and also indicate that local structure around lead or zirconium atoms is also affected by the introduction of \'LA\' and \'BA\' atoms in the PZT structure. In addition, XANES spectra measured at \'O\' \'K\'-edge revealed a reduction in the hybridization degree between \'O\' 2p and \'PB\' 6sp states with the addition of \'LA\' or \'BA\' atoms to the structure of PZT. It has been shown that hybridization between these states is essential to ferroelectricity and this reduction would be related to the relaxor behavior. PLZT and PBZT systems were also studied depending on the size of particle size in a nanometer scale. Thus samples PZT, PLZT11 and PBZT10 compositions were prepared using the synthesis method of precursor polymers and the process of sintering by spark plasma. A pronounced decrease in the values of maximum permittivity was observed and the dielectric curve as a function of the temperature exhibits a diffuse behavior. This size-induced diffuse phase transition and the reduction of the permittivity magnitude could be related to the differences between the core grain and the grain boundaries.

Zusammenfassung Das beta-Proteobakterium Ralstonia eutropha H16 besitzt zwei [NiFe]-Hydrogenasen, die dem Organismus das Wachstum mit H2 als alleiniger Energiequelle unter aeroben Bedingungen ermöglichen. Reguliert wird die Expression dieser [NiFe]-Hydrogenasen durch ein bakterielles Zweikomponentensystem. Die Signaltransduktionskette besteht aus einer H2-sensierenden, regulatorischen [NiFe]-Hydrogenase (RH), einer Histidin-Proteinkinase und einem Response-Regulator. Um Einblicke in die Struktur-Funktions-Beziehung der H2-sensierenden Komponente zu bekommen, wurden Aminosäure-Austausche in konservierten Bereichen nahe des NiFe-Zentrums der RH durchgeführt. Der Austausch des invarianten Glu13 (E13Q, E13L) resultierte im Verlust der regulatorischen, der H2-oxidierenden und der H/D-Austauschaktivitäten. Spektroskopische Daten wiesen auf ein vollständig assembliertes NiFe-Zentrum hin. Mit Hilfe der ortho-/para-Konversionsaktivität wurde gezeigt, dass dieses Zentrum nach wie vor H2 binden kann. Dies deutet darauf hin, dass eine H2-Bindung am aktiven Zentrum nicht für die regulatorische Funktion der RH ausreicht. Durch den Austausch des Asp15 in His wurde der Konsensus eines konservierten Motivs der Standard-Hydrogenasen hergestellt. Das entstandene RH-Mutantenprotein besaß nur noch eine sehr niedrige H2-oxidierende Aktivität, bei nahezu unveränderter H/D-Austauschrate sowie intakter regulatorischer Aktivität. Dies deutet darauf hin, dass der H2-Umsatz nicht entscheidend für die H2-Sensierung ist. Um Informationen über die Struktur des aktiven Zentrums der RH zu erhalten, war es notwendig, große Mengen RH zu isolieren. Hierfür wurde die Strep-tag-Technologie eingesetzt, die es ermöglichte, die RH als natives Doppeldimer und als homodimeres Protein zu reinigen. Röntgenabsorptionsspektroskopie ergab erstmals, dass sich die Koordination des Nickel-Atoms im aktiven Zentrum sowohl im oxidierten als auch im reduzierten Zustand der RH deutlich von der in Standard-Hydrogenasen unterscheidet. / The beta-proteobacterium Ralstonia eutropha H16 is capable of using H2 as a facultative energy source by means of two distinct, energy-converting [NiFe]-hydrogenases. Transcription of the hydrogenase genes is regulated in response to the availability of H2 via a histidyl-aspartyl phosphorelay comprising a heterodimeric, regulatory [NiFe]-hydrogenase (RH), a histidine protein kinase and a response regulator. In order to gain insights into the mechanism of H2-mediated signal transduction, conserved amino acid residues close to the NiFe active site of the RH were exchanged. Replacement of the strictly conserved Glu13 within the RH large subunit by glutamine and leucine resulted in the loss of the regulatory, H2-oxidizing and hydrogen/deuterium exchange activities. Infrared spectroscopic analysis revealed, that the RH E13Q and E13L derivatives contained a fully assembled NiFe active site and showed para-/ortho-H2 conversion activity. These results indicated that H2-binding at the active site is not sufficient for H2 sensing. Replacement of Asp15, a residue unique in H2 sensors, by histidine restored the consensus of energy-linked [NiFe]-hydrogenases. The resulting RH mutant protein showed only traces of H2-oxidizing activity, whereas the H/D-exchange activity and the regulatory activity were nearly unaffected. H2-dependent signal transduction in the respective mutant strain was less sensitive to O2 than in the wild type. These results suggest that the H2 sensing is independent of H2 turnover. To get insights into the structure of the RH it was necessary to isolate large amounts of RH. By establishing the Strep-tag technology, allowing a fast, mild and efficient purification, it was possible to isolate the native RH-double dimer as well as the modified monodimeric RHstop protein in sufficient amounts for spectroscopic analyses. X-ray absorption spectroscopy showed for the first time that the RH active site undergoes significant structural changes upon exposure to H2.

Die vorliegende Arbeit befasst sich mit der elektronischen Struktur von Bi-Kupraten vom Normalzustand bis in den supraleitenden Zustand. Der Normalzustand von einschichtigen Bi-Kupraten wurde mittels polarisationsabhängiger XAS untersucht. Es konnte eine deutliche Polarisationsabhängigkeit der CuL3- und OK-Kante innerhalb der Kupferoxidebene beobachtet werden. Insbesondere in den Merkmalen, die den dotierten Löchern zugeordnet werden. Die Winkelabhängigkeit geht über die erwartete Hybridisierung von Cu3dx^2-y^2- und O2px,y-Orbitalen hinaus, und unterstützt somit Theorien, die auch Orbitale ausserhalb der Kupferoxidebene zur Beschreibung der elektronischen Struktur einbeziehen. Desweiteren wurde beobachtet, dass die Ladungs-Transfer-Lücke sich mit steigender Lochkonzentration vergrößert konform zu Theorien zum Zusammenbruch der Zhang-Rice-Singuletts im überdotierten Bereich. Mittels ARPES wurden die Anregungen nahe der Fermikante in antinodaler Richtung an zweischichtigen Bi-Kupraten untersucht. Die komplexe Linienform im zweischichtigen Bi-Kuprat, die aus Interlageneffekten resultiert, wurde durch die gezielte Ausnutzung von Matrixelementeffekten vereinfacht. Dadurch konnten, in Kombination mit der spezifischen Ausrichtung der Polarisation, vorherige, sich scheinbar widersprechende Beobachtungen am einschichtigen und zweischichtigen Bi-Kuprat in Einklang gebracht werden. Es konnte gezeigt werden, dass im zweischichtigen Bi-Kuprat eine Anregung zusätzlich zum bindenden und antibindenden Band existiert, welche mit dem antibindenden Band korreliert zu sein scheint. Außerdem zeigt es Gemeinsamkeiten mit dem scharfen Peak, der im einschichtigen Bi-Kuprat gefunden wurde. So besteht es über die supraleitende Sprungtemperatur Tc hinaus, und verschwindet vermutlich bei oder über der Pseudolücken-Temperatur T*. Die ARPES Messungen lassen sich am Besten innerhalb des Modells elektronischer Inhomogenitäten erklären, welches Hochtemperatursupraleitung aus Streifen ableitet. / The electronic structure of Bi cuprates from the normal state down to the superconducting state has been investigated. The normal state electronic structure is probed by polarization dependent XAS on single layer Bi cuprates. With the x-ray beam being incident normal to the CuO2 plane the azimuthal angle was varied to explore the polarization effects on orbitals within the plane. In the CuL3- as well as the OK-edge spectra, the spectral features related to the doped holes showed a distinct polarization dependence within the CuO2 plane. The revealed polarization dependence is more complex than expected from hybridization of Cu3dx^2-y^2 and O2px,y orbitals only. Thus, the results support the inclusion of out-of-plane orbitals into the description of the electronic structure as has been previously theoretically proposed. Furthermore, the charge transfer gap has been observed to rise with rising hole concentration supporting theories of the instability of Zhang-Rice-singlets in the overdoped regime. By ARPES the excitations close to the Fermi surface in the antinodal region of double layer Bi cuprates have been investigated. The complex lineshape in double layer Bi cuprates that results from interlayer effects has been disentangled by exploiting matrix element effects. In combination with distinct polarization settings this enabled to unify seemingly inconsistent observations made on single and double layer Bi cuprates. The existence of an excitation additional to antibonding and bonding band could be shown in the double layer Bi cuprate. This additional excitation is probably connected to the antibonding band. It furthermore shows similarities to the sharp peak observed in single layer Bi cuprates. It persists to temperatures above the superconducting temperature Tc, and presumably vanishes at or above the pseudogap temperature T*. The ARPES results could be best explained within the model of electronic inhomogeneity which derives superconductivity from stripes.

<p>Metalloproteins, or proteins with a metal ion cofactor, are essential for biological function of both lower and higher level organisms. These proteins provide a multitude of functions from molecular transport, such as the hemoglobin transport of oxygen, to biologically important catalytic processes. As an example case, photosystem II (PSII) is studied as a representative metalloprotein. It was chosen based on the potential impact in the energy sector due to its ability to perform water oxidation using solar based energy. Understanding mechanisms by which the Mn₄Ca cluster inside PSII, also known as the oxygen evolving complex (OEC), can store energy as redox equivalents for splitting water will be essential for future development of analogous artificial systems. By using time resolved x-ray spectroscopy, the electron structure of the metal in the protein was probed through the catalytic cycle. While the applications mentioned herein are based on PSII from spinach, the developments in time-resolved x-ray spectroscopy techniques are also applicable to other metalloproteins.</p><p></p><p>By creating a new x-ray spectrometer we were able to capture the difference in x-ray emission spectra between two compounds differing in a single metal bound ligand, i.e. Mn^IV-OH and Mn^IV=O. This both establishes the functionality of the x-ray emission spectrometer and provides useful insight into the expected changes upon an oxygen double bond formation. This change in spectroscopic signal is discussed in context of the OEC which has been hypothesized to form a Mn^IV=O state.</p><p></p><p>A new sample delivery system and further developments to the x-ray spectrometer enabled both time-resolved x-ray absorption and time-resolved x-ray emission of PSII. These experiments show the potential of synchrotron sources for time-resolved x-ray spectroscopy. From our x-ray absorption measurements we were able to follow the electronic structure changes in time using a single incident photon energy. From the kinetic traces obtained, we show possible alternative interpretations of previous results showing a delay in reduction during the final step in water oxidation. From the x-ray emission spectroscopy (XES) measurements of PSII we were able to reproduce previous results within a limited collection time and give estimates for data size requirements for metalloproteins using this spectrometer. Between the results of both these measurements, we show the improved capability for time resolved measurements at synchrotrons.</p><p>The development of x-ray free electron lasers (XFELs) has also opened many opportunities for understanding faster electronic dynamics by providing femtosecond x-ray pulse durations with ~10¹² photons per pulse. While theoretical modeling of distortions to crystallographic data have been performed, little to no work has been done to understand under what conditions such an intense pulse will have on an impact on emission spectra. Here an atomistic model was developed, and data collected, to clarify the effects of sequential ionization, i.e. two single photons absorbed by the same atom at different times during a single pulse. Experimentally we found that XFELs easily achieve flux densities that invoke a different response than is classically observed for single photon absorption and emission for Mn^II which was used as a representative case for 3d transition metals in general. We also give parameters by which the onset of this damage can be predicted and an approximation to its effect on 3d transition metals. Additionally this work guides the work of future XFEL facilities as it shows that shorter pulses, currently believed to be able to escape x-ray induced distortions to crystallography data, is not a viable method for overcoming changes in x-ray emission spectra.</p><div><br></div>

Nanotechnology offers a great potential do design fertilizers with unique properties capable to boost the plant productivity. However, the nanoparticles environmental fate and their toxic responses still need to be deeply investigated to their safe use. This study aims to investigate the effect of copper oxide (nCuO) and magnetite nanoparticles (nFe3O4) on the germination and seedling development of Phaseolus vulgaris L. Seeds were treated in nanoparticles dispersions in a wide range of concentrations (1, 10, 100 and 1 000 mg L-1) and incubated in a germination chamber during 5 days. Different sized nCuO (25, 40 and <80 nm) and polyethylene glycol (PEG) coated nFe3O4 were evaluated. Although both nCuO and nFe3O4 treatments did not affected the germination rate, seedling weight gain was promoted by 40 nm CuO at 100 mg Cu L-1 and inhibited by 1 000 mg Cu L-1 of 25 nm CuO and positive control (CuSO4). Among the tested nCuO, the higher chemical reactivity was found for the 25 nm CuO, and this may partially explain the observed deleterious effects. Seeds treated in nFe3O4-PEG at 1 000 mg Fe L-1 increased radicle elongation compared to the negative control (water), while Fe2+/Fe3+ (aq) (positive control) and bare nFe3O4 at 1 000 mg Fe L-1 treatments reduced the radicle of the seedlings. The growth promoted by the PEG-coated nanoparticles can be justified by the higher water uptake induced by the PEG, and also by its lower chemical reactivity compared to the bare nanoparticles. This was reinforced by enzymatic assays since nFe3O4-PEG treatment was also the least harmful to the alpha-amylase activity. X-ray fluorescence spectroscopy (XRF) showed that most of the Cu and Fe incorporated by the seeds remained in the seed coat, specially in the hilum region, and X-ray tomography indicated that Fe3O4-PEG penetrated in this structure. X-ray absorption spectroscopy (XAS) unraveled that the Cu and Fe chemical environment of the nCuO and nFe3O4-PEG treated seeds persisted mostly in its primitive form. These results contribute to the understanding of how nCuO, nFe3O4 and nFe3O4-PEG interact with common bean seeds and seedlings and highlights its potential use in seed priming / A nanotecnologia oferece um grande potencial para o desenvolvimento de fertilizantes com propriedades únicas, capazes de impulsionar a produtividade das plantas. Contudo, o destino ambiental e os efeitos tóxicos das nanopartículas ainda necessitam ser profundamente investigados para o seu uso seguro. Este estudo visa investigar o efeito das nanopartículas de óxido de cobre (nCuO) e magnetita (nFe3O4) na germinação e desenvolvimento das plântulas de Phaseolus vulgaris L. As sementes foram tratadas em dispersões de nanopartículas em diversas concentrações (1, 10, 100 and 1 000 mg L-1) e incubadas em uma câmara de germinação durante 5 dias. Diferentes tamanhos de nCuO (25, 40 e <80 nm) e nFe3O4 recoberta com polietileno glicol (PEG) e foram avaliados. Embora ambos tratamentos de nCuO e nFe3O4 não afetaram a taxa de germinação, o ganho de massa das plântulas foi promovido pela nCuO de 40 nm à 100 mg Cu L-1 e inibido pelos tratamentos de nCuO de 25 nm e controle positivo (CuSO4) à 1 000 mg Cu L-1. Dentre as nCuO testadas, a maior reatividade química foi encontrada para a nCuO de 25 nm, e isso pode explicar parcialmente os efeitos deletérios desta nanopartícula. Sementes tratadas com nFe3O4-PEG à 1 000 mg Fe L-1 aumentaram o alongamento das radículas em comparação ao controle negativo (água), enquanto que os tratamentos Fe2+/Fe3+ (aq) (controle positivo) e nFe3O4 sem recobrimento à 1 000 mg Fe L-1 reduziram as radículas das plântulas. O crescimento promovido pelas nanopartículas recobertas com PEG pode ser justificado pela maior absorção de água induzido pelo PEG, e também pela sua baixa reatividade química comparada às nanopartículas sem recobrimento. Isso foi reforçado por ensaios enzimáticos uma vez que o tratamento de nFe3O4-PEG foi também o menos prejudicial à atividade da alfa-amilase. A espectroscopia de fluorescência de raios-X (XRF) mostrou que a maior parte do Cu e do Fe incorporados pelas sementes permaneceu no tegumento, especialmente na região do hilo, e a tomografia de raios-X indicou que nFe3O4-PEG penetrou nesta estrutura. A espectroscopia de absorção de raios-X (XAS) revelou que o ambiente químico do Cu e do Fe das sementes tratadas com nCuO e nFe3O4-PEG persistiram majoritariamente em sua forma primitiva. Estes resultados contribuem para o entendimento de como nCuO, nFe3O4 e nFe3O4-PEG interagem com sementes de feijão e destaca seu potencial uso no tratamento de sementes

<p>Fullerenes have been shown to constitute a prototypical building block for truly nanometer-sized devices and exotic nanounit-based materials, e.g., high-temperature superconductors. This makes the detailed understanding of fullerene electronic states in compounds and at interfaces of primary importance, since the high symmetry of the molecule greatly </p><p>simplifies the starting point of the analysis. Carbon nanotubes, which combine one macroscopic with two nanoscopic dimensions, are perhaps of even greater practical interest.</p><p>Angle-dependent electron spectroscopies have been employed in the present work to study these materials, characterizing their structure, bonding, and electronic states. For solid C₆₀, the photoelectron angular distribution has been found to be essentially that of the free molecule, modified by solid state scattering; a similar distribution is found for K₃C_60.</p><p>The surface and bulk electronic structure of K₃C₆₀ has been identified by angle-dependent core and valence photoelectron spectroscopy (PES) and x-ray emission spectroscopy. An insulating surface layer has been identified for this high-temperature superconductor.</p><p>Angle-dependent valence PES is used to investigate the electronic states of C₆₀/Al(110). Electron correlations are found to be the origin of the splitting observed in the molecular orbitals, which is quite sensitive to the molecular orientation. The components of the highest occupied molecular orbital are differentiated according to their overlap with the substrate.</p><p>A rigid shift of valence- and core-levels has been observed even for ionic and covalent C₆₀compounds, reflecting the efficient static polarizability screening of the molecule. </p><p>The alignment of multi-walled carbon nanotubes has been investigated by x-ray absorption spectroscopy, using the spectral intensity ratio of π*- and *-resonances. Core level combined with valence PES shows that the degree of defect structure varies from position to position on the sample. Valence photoelectron spectra of defect-free sample spots closely resembles the total DOS of graphite.</p>

Core- and Valence Photoelectron Spectroscopy (PES), X-ray- and Ultraviolet-Visible Absorption Spectroscopy (XAS and UV-Vis), Scanning Tunneling Microscopy (STM) and Density Functional Theory (DFT) calculations are used to study the electronic and geometrical structure of a class of macro-cyclic molecules, Phthalocyanines (Pc), on surfaces. These molecules are widely studied due to their application in many different fields. Multilayer and monolayer coverages of Iron Phthalocyanine (FePc) and metal-free Phthalocyanine (H2Pc) deposited on different surfaces are investigated in order to get insight in the electronic and geometrical structure of the obtained overlayers, of crucial importance for the understanding of the film functionality. Sublimation of molecular thick films on Si(100) and on conducting glass results in films with molecules mainly oriented with their molecular plane orthogonal to the surface. Ex-situ deposited H2Pc films on conductive glass show different molecular orientation and morphology with respect to the vacuum sublimated films. We study the monolayer adsorption structure of FePc and H2Pc and compare our results with other Pc’s adsorbed on graphite. We find that the molecular unit cell and the superstructure is characteristic for each Pc adsorbed on graphite, even if the geometrical size of the compared molecules is the same. The PE- and XA- spectra of FePc on graphite are essentially identical for the mono- and multilayer preparations, evidencing weak intermolecular and molecular-substrate interactions of van der Waals nature. Furthermore, we characterize Pc’s on InSb (001)-c(8x2). The substrate In rows are observed to be the adsorption site for Pc’s. We find that the growth of the two-dimensional islands of FePc is prolonged in the [-110] direction, in contrast to ZnPc adsorbed on the same substrate at room temperature. We interpret this result as an indication that the adsorption is controlled by the substrate corrugation observed at 70 K.