In response to the development of a next-generation networking (NGN) generalized multi-protocol label switching (GMPLS) technology is required for automatically switched optical network (ASON). Reconfigurable optical add-drop multiplexer (ROADM) is an indispensable device for the ASON, and the dense wavelength division multiplexed (DWDM) signals can be transmitted through the network under the management of the network administrator to configure dynamic customer needs and the desired quality of service (QoS). The ROADM can also increase the efficiency of utilizing the existing capacity of the optical fiber lines and can reduce or waive to set up additional optical fiber lines. This thesis studies a novel ROADM based on the arrayed waveguide grating (AWG) and the fiber Bragg grating (FBG) to overcome that the current ROADM cannot process that the input signal channels is greater than the wavelengths channels of AWG. Many types of ROADMs have been proposed and realized through different optical devices. Among these, hybrid optical circulator and FBG based ROADM is more attractive because of its low crosstalk and polarization insensitivity. However, it still suffers from many component counts and high insertion losses due to the use of many circulators and a multiplexer-demultiplexer pair. In this master thesis, we focus on demonstrating a novel ROADM and evaluating its crosstalk performance. It is found that the proposed ROADM has the advantage on extending the number of wavelength signal to make the system configurable and flexible.

<p>The main objectives of this thesis were to develop a lowtemperature PECVD process suitable for optoelectronicintegration, and to optimize silica glass composition forUV-induced modifications of a refractive index in PECVDfabricated planar devices. The most important achievement isthe successful development of a low temperature silicadeposition, which for the first time makes it is possible tofabricate good quality low loss integrated components whilekeeping the temperature below 250oC during the entirefabrication process. Two strong absorption peaks thatappear at1.5 mm communication window due to N-H and Si-H bonds have beencompletely eliminated by process optimization. This openspossibilities for monolithic integration with other,temperature sensitive devices, such as semiconductor lasers anddetectors, or polymer-based structures on the common siliconplatform. PECVD technology for low loss amorphous silicon inapplication to SiO2/Si based photonic crystal structures hasbeen also optimized to remove hydrogen incorporated during thedeposition process, responsible for the porosity of thedeposited material and creation of similar to silica absorptionbands.</p><p>Change of the refractive index of germanium doped silicaunder UV irradiation is commonly used for fabrication of UVinduced fiber Bragg gratings. Here we describe our achievementsin fabrication of fiber Bragg gratings and their application todistributed sensor systems. Recently we have built up a laserlab for UV treatment in application to planar technology. Wehave demonstrated the high photosensitivity of PECVD depositedGe-doped glasses (not thermally annealed) even without hydrogenloading, leading to a record transmission suppression of 47dBin a Bragg grating photoinduced in a straight buried channelwaveguide. We have also used a UV induced refractive indexchange to introduce other device modifications or functions,such as phase shift, wavelength trimming and control ofpolarization birefringence.The developed low temperature technology and the UVprocessing form a unique technology platform for development ofnovel integrated functional devices for optical communicationsystems.</p><p>A substantial part of the thesis has been devoted tostudying different plasma deposition parameters and theirinfluence on the optical characteristics of fabricatedwaveguides to find the processing window giving the besttrade-off between the deposition rate,chamber temperatureduring the process, optical losses and presence of absorptionbands within the interesting wavelength range. The optimalconditions identified in this study are low pressure (300-400mTorr), high dilution of silane in nitrous oxide and high totalflow (2000 sccm), low frequency (380 KHz) RF source and high RFpower levels (800-1000 W).</p><p>The thesis provides better understanding of the plasmareactions during the deposition process. RF Power is the keyparameter for increasing the rate of surface processes so as toaccommodate each atomic layer in the lowest energy statepossible. All the process conditions which favor a moreenergetic ion bombardment (i.e. low pressure, low frequency andhigh power) improve the quality of the material, making it moredense and similar to thermal oxide, but after a certain pointthe positive trend with increasing power saturates. As theenergy of the incoming ion increases, a competing effect setsin at the surface: ion induced damage and resputtering.</p><p>Finally, the developed technologies were applied for thefabrication of some test and new concept devices for opticalcommunication systems including multimode interference (MMI)-based couplers/splitters, state-of-the-art arrayed waveguidegrating-based multi/ demultiplexers, the first Bragg gratingassisted MMI-based add-drop multiplexer, as well as moreresearch oriented devices such as a Mach-Zehnder switch basedon silica poling and a Photonic Crystal-based coupler.</p><p><b>Keywords:</b>silica-on-silicon technology, PECVD, plasmadeposition, photonic integrated circuits, planar waveguidedevices, UV Bragg gratings, photosensitivity, arrayed waveguidegratings, multimode interference couplers, add-dropmultiplexers.</p>

L'apparition des dernières applications de l'internet à haut débit engendre une augmentation importante des échanges d'informations à travers le monde. Pour éviter une saturation inexorable du réseau de télécommunications, les liaisons par fibre optique avec multiplexage en longueur d'onde (DWDM) se généralisent pour permettre la transmission de données avec un débit actuel maximum de 1Tbit/s. L'aiguillage en longueur d'onde des signaux entre les différentes boucles de ce type de réseau est réalisé à l'aide de Multiplexeurs Insertion- Extraction (MIE). Ce mémoire est consacré à l'étude et à la réalisation de deux MIE réalisés par photoinscription de réseaux de Bragg (=filtres sélectifs en longueur d'onde photoinscrits par un champ d'interférence de lumière laser UV) dans des guides optiques à coeur dopé en germanium. Le premier MIE étudié lors de cette thèse est réalisé sur la base d'un coupleur directif en optique intégrée SiO2/Si dans la zone de couplage duquel deux réseaux de Bragg ont été photoinscrits. Le travail a consisté à améliorer à la fois la fabrication des guides optiques (diminution de leur biréfringence) ainsi que leur photoinscription (meilleure apodisation de la réponse spectrale du spectre réfléchi). La conception et la réalisation de premiers prototypes permettant l'extraction de canaux espacés de 200 GHz ont alors pu être effectuées. La deuxième étude se concentre, quant à elle, sur l'optimisation d'un MIE plus mature basé sur un interféromètre de Mach-Zehnder à réseaux de Bragg réalisé en fibre bicoeur. L'influence néfaste du déphasage engendré par les réseaux de Bragg sur la réponse spectrale de l'interféromètre a été discutée et minimisée. La reconstruction de la dispersion chromatique de ces réseaux via la réponse spectrale de l'interféromètre a aussi été étudiée. Des composants industrialisables pour réseaux d'espacements intercanaux de 100 GHz et 50 GHz ont alors pu être réalisés.

Conselho Nacional de Desenvolvimento CientÃfico e TecnolÃgico / CoordenaÃÃo de AperfeiÃoamento de Pessoal de NÃvel Superior / Neste trabalho, alÃm dos capÃtulos que envolvem a teoria e definiÃÃes, foi basicamente divido em trÃs estudos: Primeiro (capÃtulo 4), apresentamos uma investigaÃÃo numÃrica do desempenho de um filtro passa-banda totalmente Ãptico composto por um acoplador direcional duplo seguido de duas grades de Bragg simetricamente iguais gravadas nos seus braÃos de saÃda. Esta configuraÃÃo caracteriza um InterferÃmetro de Michelson com caracterÃsticas de um filtro add/drop. As caracterÃsticas de transmissÃo (T), taxa de extinÃÃo (XR) e âcrosstalkâ (XT) foram estudadas a partir da aplicaÃÃo de um sinal CW (onda contÃnua) na entrada do dispositivo. A teoria de modos acoplados e o mÃtodo de Runge Kutta de 4a ordem foram aplicados, respectivamente para resolver as equaÃÃes diferenciais acopladas. Este à o primeiro estudo feito considerando a nÃo linearidade do acoplador e a linearidade das grades de Bragg. O dispositivo apresenta um comportamento altamente nÃo-linear em funÃÃo do defasamento entre as amplitudes dos feixes refletidos e em funÃÃo da potÃncia de entrada. Num segundo momento (capÃtulo 5) apresentamos a propagaÃÃo e chaveamento de pulsos ultracurto (~2ps) usando um interferÃmetro de Michelson de Fibras Ãpticas. Neste estudo o desempenho do interferÃmetro à estudado como uma funÃÃo das caracterÃsticas nÃo lineares do acoplador e das grades de Bragg. Os estudos numÃricos foram feitos a partir das equaÃÃes de modos acoplados resolvidas usando o mÃtodo de Runge-Kutta de 4 ordem. As caracterÃsticas de chaveamento do pulso foram analisadas em funÃÃo da potÃncia de entrada e do defasamento aplicado em uma das grades de Bragg. As caracterÃsticas de transmissÃo (T), coeficiente de ExtinÃÃo (XR), âcrosstalkâ (XT), fator de compressÃo (FC). Utilizamos trÃs valores de potÃncia de entrada: abaixo da potÃncia critica (P0=1W), igual a potÃncia crÃtica (P0=1,73W) e acima da potÃncia crÃtica (P0=1,95W). AtravÃs deste estudo, pode-se verificar que a transmissÃo, taxa de extinÃÃo, âcrosstalkâ e fator de compressÃo dependem da potÃncia da bombeio inserida no dispositivo e da defasagem aplicada. O interferÃmetro de Michelson em fibras implementa componente de grande importÃncia para aplicaÃÃes em redes Ãpticas, como os demultiplexadores add/drop. Este dispositivo tem atraÃdo bastante interesse no campo das telecomunicaÃÃes devido a sua alta capacidade de taxas de transmissÃo. Num terceiro momento foi apresentado um estudo de simulaÃÃo numÃrica do desempenho da codificaÃÃo e decodificaÃÃo de pulsos Ãpticos curtos (ps) em sistemas OCDMA (Optical Code Division Multiple Access â acesso VIII mÃltiplo por divisÃo de cÃdigo no domÃnio Ãptico) baseado em FBG (Fiber Bragg Grating â grade de Bragg em fibra Ãptica) onde os cÃdigos sÃo inseridos atravÃs de saltos discretos na fase Ãptica (Â&#960;). Para geraÃÃo de pulsos codificados foram utilizados cÃdigos de Gold obtidos analiticamente. Analisamos como a inserÃÃo de cÃdigos adicionais afetam a autocorrelaÃÃo e correlaÃÃo cruzada. O interferÃmetro de Michelson inicialmente estudado no capÃtulo 4 foi utilizado para propagaÃÃo e chaveamento de sinais codificados. Baseados nas caracterÃsticas de TransmissÃo (T) e Taxa de extinÃÃo (XR) fizemos um estudo do dispositivo como multiplexador /demultiplexador add/drop na recuperaÃÃo de pulsos codificados. / This work, in addition the chapters which involves both theory and definitions, was basically divided three studies: First (chapter 4),we present a numerical investigation of the performance of a bandpass filter composed of an all-optical directional coupler, followed by two double bars Bragg recorded symmetrically equal outputs in their arms. This configuration features a Michelson interferometer with characteristics of an add/ drop filter. The transmission characteristics (T), extinction rate (XR) and "crosstalk" (XT) were studied based on the application of a CW signal (continuous wave) into the device. Theory of coupled modes and the Runge Kutta fourth order were applied respectively to solve the coupled differential equations. This is the first study considering the nonlinearity of the coupler and the linearity of Bragg gratings. The device features a highly nonlinear behavior as a function of dephasing between the amplitudes of the reflected beams and depending on the input power. In a second step (section 5), the propagation and switching of ultrashort pulse (~ 2PS) Michelson interferometer using an optical fiber. In this study the performance of the interferometer is studied as a function of the nonlinear characteristics of the coupler and Bragg gratings. The numerical studies were made from the coupled mode equations solved using the Runge-Kutta 4th order. The pulse switching characteristics were analyzed as a function of input power and applied to one dephasing Bragg gratings. The transmission characteristics (T), extinction coefficient (XR), "crosstalk" (XT), the compression factor (CF)and shape of the pulses were analyzed for different values of phase and different input powers. We use three values of input power: below the critical power (1W = P0), equal to the critical power (P0 = 1.73W) and above the critical power (P0 = 1.95W). Through this study, it is found that the transmission rate of extinction, "crosstalk" and compression factor depends on the power of the pump device inserted into the gap and applied The Michelson interferometer fiber implement major component with applications in optical networks, such as demultiplexers add/drop. This device has attracted considerable interest in the field of telecommunications due to its ability of high transmission rates. In the third place was presented a numerical simulation study of the performance of encoding and decoding of short optical pulses (ps) systems OCDMA (Optical Code Division Multiple Access based on FBG (Fiber Bragg Grating ) where codes are inserted through discrete jumps in the optical phase ( &#960;). For generation of coded pulses were used Gold codes obtained analytically. We look at how the inclusion of additional codes affect the autocorrelation and cross correlation.The Michelson interferometer initially studied Chapters 4 was used for propagation and switching of encrypted signals. Based on the characteristics of transmission (T) and extinction rate (XR) did a study of the device as multiplexer/demultiplexer add / drop in the recovery of coded pulses.

Vertically rolled-up microcavities are fabricated using differentially strained nanomembranes by employing rate and temperature gradients during electron beam evaporation of SiO2. The geometry of the rolled-up tubes is defined by a photo-lithographically patterned polymer sacrificial layer beneath the SiO2 layers that is dissolved to start the rolling. Rolled-up tubes support resonances formed by constructive interference of light propagating along the circumference. Optical studies are performed in the visible spectral range using a micro-photoluminescence (µPL) setup to excite and detect optical modes. Record high quality factors (Q factors) of 5400 for rolled-up resonators probed in PL-emission mode are found and their limits are theoretically investigated. Axial modes can also be supported when an increased winding number in the center is realized by appropriate pattern designs. In addition, higher order radial modes can be confined when atomic layer deposition (ALD) coatings are applied. Both types of modes are identified using polarization and spatially resolved µPL maps. Evanescent-wave coupling by tapered fibers and tubes on substrates is the second method used to study light confinement and to demonstrate frequency filtering in ALD coated rolled-up microcavities. Scans are performed by monitoring light from a tunable laser in the range of 1520-1570 nm after transmission through the tapered fiber. Dips in the spectrum are found and attributed to fundamental and axial resonant modes. Moreover, by coupling two tapered fibers to a lifted rolled-up microcavity, a four-port add-drop filter is demonstrated as a future component for vertical resonant light transfer in on-chip optical networks. Simulations show that the subwavelength tube wall thickness limits the Q factor at infrared wavelengths and ALD coatings are necessary to enhance the light confinement. After coating, two linear polarization states are found in experiment and fundamental and axial modes can be selectively excited by coupling the fiber to different positions along the tube axis. Spatially and polarization resolved transmission maps reveal a polarization dependent axial mode distribution which is verified theoretically. The results of this thesis are important for lab-on-chip applications where rolled-up microcavities are employed as high resolution optofluidic sensors as well as for future uses as waveguide coupled components in three-dimensional multi-level optical data processing units to provide resonant interlayer signal transfer.

Vertically rolled-up microcavities are fabricated using differentially strained nanomembranes by employing rate and temperature gradients during electron beam evaporation of SiO2. The geometry of the rolled-up tubes is defined by a photo-lithographically patterned polymer sacrificial layer beneath the SiO2 layers that is dissolved to start the rolling. Rolled-up tubes support resonances formed by constructive interference of light propagating along the circumference. Optical studies are performed in the visible spectral range using a micro-photoluminescence (µPL) setup to excite and detect optical modes. Record high quality factors (Q factors) of 5400 for rolled-up resonators probed in PL-emission mode are found and their limits are theoretically investigated. Axial modes can also be supported when an increased winding number in the center is realized by appropriate pattern designs. In addition, higher order radial modes can be confined when atomic layer deposition (ALD) coatings are applied. Both types of modes are identified using polarization and spatially resolved µPL maps. Evanescent-wave coupling by tapered fibers and tubes on substrates is the second method used to study light confinement and to demonstrate frequency filtering in ALD coated rolled-up microcavities. Scans are performed by monitoring light from a tunable laser in the range of 1520-1570 nm after transmission through the tapered fiber. Dips in the spectrum are found and attributed to fundamental and axial resonant modes. Moreover, by coupling two tapered fibers to a lifted rolled-up microcavity, a four-port add-drop filter is demonstrated as a future component for vertical resonant light transfer in on-chip optical networks. Simulations show that the subwavelength tube wall thickness limits the Q factor at infrared wavelengths and ALD coatings are necessary to enhance the light confinement. After coating, two linear polarization states are found in experiment and fundamental and axial modes can be selectively excited by coupling the fiber to different positions along the tube axis. Spatially and polarization resolved transmission maps reveal a polarization dependent axial mode distribution which is verified theoretically. The results of this thesis are important for lab-on-chip applications where rolled-up microcavities are employed as high resolution optofluidic sensors as well as for future uses as waveguide coupled components in three-dimensional multi-level optical data processing units to provide resonant interlayer signal transfer.