[pt] No atual modelo econômico do setor elétrico, é necessário identificar os agentes beneficiados pelos serviços ancilares à transmissão de potência de forma a alocar adequadamente os custos de investimento, de operação e manutenção do equipamento necessário para a prestação do serviço. Entre os serviços ancilares, destaca-se o suporte de potência reativa para a regulação de tensão. Este trabalho apresenta um método baseado nos multiplicadores de Lagrange de um problema de otimização associado ao cálculo das medidas corretivas necessárias para lidar com níveis de tensão inadequados. Dois critérios de otimização são definidos: mínimo corte de carga e mínima alocação de potência reativa. Os multiplicadores de Lagrange definem a responsabilidade de cada barra quando ocorrem violações de tensão no sistema. O método permite não só identificar as barras beneficiadas pelo equipamento de compensação de potência reativa como também alocar os custos entre elas. É priorizada a confiabilidade do sistema, analisando as contingências possíveis e considerando suas respectivas probabilidades de ocorrência. O programa computacional NH2, desenvolvido pelo CEPEL, é a ferramenta básica para o desenvolvimento deste trabalho. O método é aplicado, a título de ilustração, ao sistema IEEE - RTS de 24 barras e ao sistema da Área Rio. Os resultados obtidos são comparados com um método já existente, que define fatores de alocação de custos medindo os benefícios às barras devido ao suporte de potência reativa. Esta comparação, benefício x responsabilidade, e a própria teoria dos dois métodos, mostram que o método proposto identifica mais adequadamente as barras e os respectivos fatores para a repartição dos custos. / [en] It is important to identify the agents that take advantage of the ancillary services for system operation in the nowadays electricity market. The actual economic design requires that the costs of investment, operation and maintenance of the necessary equipment should be properly allocated between these agents. Among the ancillary services, the reactive power support for voltage regulation is quite important. It is presented a method that identifies the buses that take advantage of the reactive power equipment and allocates the costs between each one of them. The power system reliability is taken into account. The analysis considers possible contingencies and their respective probability of occurrence. The computer program NH2, developed by CEPEL, is the main tool for the development of this work. The method is based on the Lagrangian multipliers of an optimal power flow problem (OPF) associated to corrective measures necessary to deal with voltage violations. Two different objective functions are used: minimum load shedding and minimum reactive power injection. The Lagrangian multipliers define the responsibility of each bus when system voltage violations occur. For the purpose of illustration, the method is applied on the 24 bus IEEE Reliability Test System and on Área Rio system. Results are compared with those produced by other existing method that defines cost allocation factors measuring the benefit due the reactive support. This comparison, benefit x responsibility, and the theory used by both methods, show that the proposed method identifies more appropriately the buses and the corresponding factors to allocate the costs.

[pt] Com a implantação do novo modelo econômico nos sistemas de potência, a justa remuneração das empresas provedoras de serviços ancilares tem se tornado um assunto grande importância. O suporte de potência reativa, por se tratar também de um serviço ancilar, está inserido neste contexto. Desta forma, a factível identificação dos agentes beneficiários pelo suporte, bem como as proporções deste beneficiamento podem implicar em um mecanismo viável de remuneração para os custos de cada fonte provedora. Este trabalho apresenta um método de alocação de custos pelo suporte de potência reativa baseado nos princípios fundamentais da teoria de circuitos elétricos, buscando determinar a contribuição de potência reativa de cada fonte para cada barra de carga. Para isto, é sugerida uma modelagem de fontes de tensão, que permite levar em conta a natureza local da relação Q-V, proporcionando uma abordagem simples e clara do problema. Complementarmente é apresentado um método de alocação das perdas reativas em cada ramo de transmissão entre as fontes provedoras de potência reativa. Para validar o método proposto, são realizados testes em sistemas de potência de pequeno e médio porte, apresentado as parcelas de contribuição de cada fonte de potência reativa para cada carga, e adicionalmente para as perdas reativas em cada ramo de transmissão. Comparações são estabelecidas com um método existente, onde é constatado que o método proposto apresenta maior coerência com as propriedades elétricas dos sistemas de potência, destacando-se a verificação clara da natureza local do consumo de potência reativa. Em relação aos resultados da alocação de perdas reativas, verifica-se que o método serve como indicativo sobre o uso da rede de transmissão por parte de cada fonte de potência reativa. / [en] After implantation of power systems` new economic model, a fair remuneration strategy of ancillary services suppliers had became an important issue. Reactive power support is also an ancillary service, thus, it belongs to this context. Then, identification of service beneficiaries as well as the benefit proportions may take a feasible remuneration mechanism for each source. This work presents a reactive power support cost allocation method based on fundamental principles of circuit theory, where reactive power contribution from each source to each load is calculated. This method suggests a modeling of voltage sources, which takes into account the Q-V relationship, providing a simple and clear treatment of the problem. Additionally, a reactive loss allocation method to each branch is presented. To validate the proposed method, tests with small and medium size systems are realized. So, there are presented results of reactive power demand and transmission losses allocation into systems` sources. Comparisons with an existent method are established, when we can verify that the proposed method brings more coherence with the electrical properties of power systems and the local nature of reactive power consumption. In the other hand, results of reactive losses allocation can indicate the transmission network usage by each reactive power source.

Este trabalho pretende analisar as particularidades dos contratos de longo prazo que levam a exigir-se dos contratantes uma postura diferenciada quanto à cooperação que eles devem entre si, para que a execução do contrato ocorra de forma eficiente. Analisamos, também, o dever de cooperação decorrente da boa-fé objetiva, suas peculiaridades e forma de aplicação aos contratos de longo prazo, sempre considerando os novos paradigmas dos contratos, associados com o papel e a importância dos contratos à sociedade e à economia. De fato, as contratações duradouras possuem características que as distinguem das relações instantâneas, com especial destaque para seu caráter relacional e incompleto, que demonstram que a postura das partes deve ser mais próxima e leal e, por isso, a cooperação tem forte importância. A boa-fé objetiva determina o dever de cooperação por meio de sua função de criação de regras de conduta. Na prática, o dever de cooperação que deve ser mais intenso para os contratos de longo prazo se concretiza por meio dos deveres anexos de conduta, que só serão conhecidos e individualizados em cada contratação individualizada. Considerados tais aspectos que justificam a maior intensidade da cooperação nos contratos de longo prazo e demonstram como a cooperação se verificará por meio dos deveres anexos de conduta, analisamos os casos de descumprimento de tais deveres por meio do conceito da violação positiva do contrato, em oposição à mora ou inadimplemento, que se relacionam ao descumprimento da própria prestação e suas consequências às relações contratuais, especialmente às de longo prazo. / This thesis has the purpose of analyzing the particularities of the long term contracts that lead to require the contracting parties to adopt a different conduct concerning cooperation between them, so that the performance of the contract may occur in an efficient fashion. We also intend to analyze the cooperation duty arising out of the goodfaith principle, its characteristics and its application to the long term contracts, always taking into consideration the news standards of the Contract Law associated with the role of the contracts to the society and economy. Indeed, the long term contracts have certain particularities that make them different from the spot relationships, in special their relational character and incompleteness, which show that the parties conduct shall be loyal and faithful and, thus, cooperation has a very important task. The principle of good-faith sets forth the duty to cooperate by means of its function of creating conduct rules. In practical terms, the duty to cooperate which shall be more intense for long term contracts is observed by means of the implied or ancillary duties, which are only known and individualized in each particular and concrete contract. Bearing in mind such aspects that justify a more intense cooperation in long term contracts and demonstrate that cooperation will mean, in practice, the compliance with ancillary or implied duties, we analyze the cases of violation of the duty to cooperate in opposition to the breaches of the contract obligations themselves and the consequences of such violation to the contractual relationship, especially to the long term contracts.

Pouca atenção tem merecido o estudo dos deveres instrumentais tributários pelos estudiosos do direito tributário em nosso país, com a preocupação de conferir contornos nítidos ao regime jurídico dos deveres instrumentais dentro do sistema tributário brasileiro e, em especial, de examinar a quais limitações está adstrita a Administração Pública na imposição desses deveres. O presente trabalho visa tentar suprir, em alguma medida, essa lacuna, promovendo uma análise das limitações à imposição de deveres instrumentais tributários, que leve em consideração, não apenas os princípios que conformam seu regime jurídico, mas, principalmente, a existência de regras objetivas disciplinando o tema, partindo-se da premissa de que, genericamente, dicções principiológicas, por sua abstração, não são suficientes para a adequada regulação das condutas intersubjetivas, seja entre particulares, seja entre estes e o Poder Público. Merecerá especial atenção a regra inserta no art. 113, §2º do Código Tributário Nacional, de forte vocação limitadora, especificamente no que tange à investigação do conteúdo semântico da expressão interesse da arrecadação ou da fiscalização dos tributos, que, a nosso ver, constitui a pedra-de-toque do regime jurídico dos deveres instrumentais e das sanções punitivas impostas em virtude de seu descumprimento. Por fim, buscar-se-á conferir a devida importância aos custos de conformidades e demonstrar que seu estudo é relevante para o sistema tributário, na medida em que tais custos, enquanto efeito econômico da imposição de deveres instrumentais, implicam efeitos relevantes no âmbito jurídico, inclusive restrições no âmbito de proteção de direitos fundamentais dos contribuintes. / The study of ancillary obligations has often been neglected by scholars of Tax Law in Brazil, namely studies concerned about defining the outlines of its framework within Brazilian tax system and, especially, to which boundaries is the Public Administration bound when imposing such obligations. This study aims to overcome this gap to some extent, providing a comprehensive analysis of the limitations to the imposition of tax ancillary obligations, investigating not only the legal principles that conform its framework, but, first and foremost, the existence of objective rules addressing this subject, based on the premise that, generically, legal principles themselves, due their natural abstraction trait, are insufficient to satisfactorily regulate inter-subjective behaviors, whether between individuals or between individuals and State. The rule set forth by article 113, §2º of Brazilian Tax Code will receive special attention in the proposed analysis, due its limit-orientation, particularly in regard to the investigation of the semantic content of the expression interest of tax collection or tax inspection, which represents the touchstone of the tax ancillary obligations framework, as well of the punitive sanctions imposed due its incompliancy. At last, this study will attempt to give appropriate relevance to the compliance costs, by demonstrating that they matter to a tax system, as such costs, despite being an economic effect of the imposition of tax ancillary obligations, do affect the legal system and, for such, also implies legal effects, as restrictions in the scope of protection of taxpayers fundamental rights.

Le sujet s'inscrit dans la stratégie d'augmentation de la pénétration des énergies renouvelables dans les réseaux électriques, en particulier ceux qui sont faiblement interconnectés, tels que les réseaux électriques insulaires. Une limite de pénétration des énergies intermittentes de 30% en puissance instantanée dans ces réseaux a été fixée par la loi française. Pour permettre de dépasser cette limite, une solution est de coupler les sources de production décentralisée et intermittente avec du stockage.Dans cette thèse, nous nous sommes intéressés au volant d’inertie, système de stockage permettant de convertir l’énergie électrique sous forme cinétique et vice versa. Celui-ci a en effet un nombre de cycles charge/décharge important en comparaison avec une batterie électrochimique et peut être utilisé pour lisser la production photovoltaïque. La fluctuation de l’énergie photovoltaïque est en effet faiblement prédictible au cours du temps et elle ne peut pas être contrôlée, notamment sa chute de production. La production photovoltaïque peut chuter jusqu’à 80 % de la puissance maximale en 30 secondes, et déstabiliser ainsi le réseau électrique. Le réseau électrique insulaire, tel que celui de la Corse, n’est pas interconnecté au réseau électrique continental. Les réseaux non – interconnectés sont plus fragiles et moins stables. Ainsi, le développement massif des centrales photovoltaïques peut faire fluctuer la fréquence et la tension du réseau. Le volant d’inertie a l’avantage de posséder un faible temps de réponse (quelques centaines de millisecondes). Cependant, il a une capacité énergétique moindre. Nous allons donc exploiter les avantages du volant d’inertie en le gérant en temps réel avec un calculateur approprié. Un volant d’inertie d’une puissance de 15 kVA et d’une capacité énergétique de 112 Wh a été caractérisé et testé à l’INES Chambéry en utilisant un simulateur réseau temps réel (RTLab®), un calculateur temps réel dSPACE® et une centrale PV. Le système de stockage est composé d’une machine électrique asynchrone et d’un volant d’inertie cylindrique en acier. Le logiciel Matlab/Simulink® est utilisé pour implémenter les lois de commande nécessaires à son pilotage. Dans cette thèse, le banc de test est présenté ainsi que les résultats sur les services système (lissage de puissance, régulation de la fréquence et de la tension). Trois méthodes de lissage de puissance sont présentées et évaluées (lissage avec une fonction de transfert, lissage avec limiteur de pente et lissage n’utilisant pas aucune fonction de lissage). La troisième méthode n’utilisant ni une fonction de transfert, ni une fonction limitant la pente des variations, nécessite moins de paramètres et s’avère plus optimale et plus robuste. Un volant d’inertie avec une autre technologie de machine électrique (la machine à réluctance variable) a été également caractérisé. C’est une Alimentation Sans Interruption (ASI), sur laquelle des paramètres tels que l’autodécharge et les rendements du système (en charge, en décharge et au repos) ont pu être mesurés. / The subject is part of the strategy to increase the penetration of renewable energy in power systems, particularly those that are poorly interconnected, such as island grids. A limit of penetration of intermittent energy by 30% in instantaneous power in these electrical grids was set by a French law. To help overcome this limitation, a solution is to couple the sources of decentralized and intermittent generation with energy storage systems. In this thesis, we are interested in flywheel energy storage systems (FESS) that converts electrical energy in kinetic energy form and vice versa. FESS have a number of cycles charge / discharge large compared with electrochemical batteries and can be used to smooth the photovoltaic power generation. The fluctuation of photovoltaic instantaneous power is indeed weakly predictable over time and it cannot be controlled, including its production fall. PV production can decrease up to 80% of its maximum power in 30 seconds, and so destabilize the grid. The island grids, such as that of Corsica, are not interconnected to the mainland power grid. The non - interconnected grids are more fragile and less stable. Thus, the massive development of photovoltaic power plants can cause fluctuations in the frequency and voltage. The flywheel has the advantage of having a low response time (a few hundred milliseconds). However, it has a lower energy capacity. The benefits of FESS are used by managing it in real time with an appropriate computer. A flywheel with a power of 15 kVA and an energy capacity of 112 Wh was characterized and tested at INES Chambery using a real time grid simulator (RTLab®), a real-time computer (dSPACE®) and a PV power plant. The storage system is composed by an asynchronous electrical machine and a cylindrical steel flywheel. The Matlab Simulink / software is used to implement the control laws necessary for its control. In this thesis, the test bench is presented and the results of ancillary services (power smoothing, frequency and voltage regulation). Three power smoothing methods are discussed and evaluated (smoothing with a transfer function, with a slope limiter function and a method not using any smoothing function). The third method uses neither a transfer function, nor a function that limits the slope variations, requires fewer parameters, and is more optimal and more robust. A flywheel with another electrical machine technology (the switched reluctance machine) has also been characterized. This is an Uninterruptible Power Supply (UPS) on which parameters such as self-discharge and efficiencies (charging mode, discharging mode and standby mode) were measured.

Pouca atenção tem merecido o estudo dos deveres instrumentais tributários pelos estudiosos do direito tributário em nosso país, com a preocupação de conferir contornos nítidos ao regime jurídico dos deveres instrumentais dentro do sistema tributário brasileiro e, em especial, de examinar a quais limitações está adstrita a Administração Pública na imposição desses deveres. O presente trabalho visa tentar suprir, em alguma medida, essa lacuna, promovendo uma análise das limitações à imposição de deveres instrumentais tributários, que leve em consideração, não apenas os princípios que conformam seu regime jurídico, mas, principalmente, a existência de regras objetivas disciplinando o tema, partindo-se da premissa de que, genericamente, dicções principiológicas, por sua abstração, não são suficientes para a adequada regulação das condutas intersubjetivas, seja entre particulares, seja entre estes e o Poder Público. Merecerá especial atenção a regra inserta no art. 113, §2º do Código Tributário Nacional, de forte vocação limitadora, especificamente no que tange à investigação do conteúdo semântico da expressão interesse da arrecadação ou da fiscalização dos tributos, que, a nosso ver, constitui a pedra-de-toque do regime jurídico dos deveres instrumentais e das sanções punitivas impostas em virtude de seu descumprimento. Por fim, buscar-se-á conferir a devida importância aos custos de conformidades e demonstrar que seu estudo é relevante para o sistema tributário, na medida em que tais custos, enquanto efeito econômico da imposição de deveres instrumentais, implicam efeitos relevantes no âmbito jurídico, inclusive restrições no âmbito de proteção de direitos fundamentais dos contribuintes. / The study of ancillary obligations has often been neglected by scholars of Tax Law in Brazil, namely studies concerned about defining the outlines of its framework within Brazilian tax system and, especially, to which boundaries is the Public Administration bound when imposing such obligations. This study aims to overcome this gap to some extent, providing a comprehensive analysis of the limitations to the imposition of tax ancillary obligations, investigating not only the legal principles that conform its framework, but, first and foremost, the existence of objective rules addressing this subject, based on the premise that, generically, legal principles themselves, due their natural abstraction trait, are insufficient to satisfactorily regulate inter-subjective behaviors, whether between individuals or between individuals and State. The rule set forth by article 113, §2º of Brazilian Tax Code will receive special attention in the proposed analysis, due its limit-orientation, particularly in regard to the investigation of the semantic content of the expression interest of tax collection or tax inspection, which represents the touchstone of the tax ancillary obligations framework, as well of the punitive sanctions imposed due its incompliancy. At last, this study will attempt to give appropriate relevance to the compliance costs, by demonstrating that they matter to a tax system, as such costs, despite being an economic effect of the imposition of tax ancillary obligations, do affect the legal system and, for such, also implies legal effects, as restrictions in the scope of protection of taxpayers fundamental rights.

<p><strong>Bakgrund/problem: </strong>Fastighetsmäklare ersätts idag främst genom provision för sitt huvuduppdrag fastighetsförmedling. Ett lagförslag vill tillåta ersättning för förmedling av sidotjänster som exempelvis bolån. Risken med lagförslaget är att mäklarens roll som oberoende mellanman försvinner om ersättningen för sidotjänstförmedling är uteslutande provisionsbaserad. Ledningen måste därför utforma välfungerande styrsystem för att undvika negativa effekter.</p><p><strong>Syfte:</strong> Att utforma ett förslag till hur företag kan undvika negativa effekter vid provisionsbaserad ersättning för sidotjänster.</p><p><strong>Metod:</strong> En kvalitativ fallstudie har genomförts med individuella, semistrukturerade intervjuer, enkätundersökning samt sekundärkällor.</p><p><strong>Resultat:</strong> Företagsledningen bör använda sig av ett kombinerat ersättningssystem med både fast och rörlig lön för sidotjänstförmedling. Vidare bör även hänsyn tas till åtgärder inom beteendestyrning, såsom utformning av välfungerande processer för de anställdas arbetssätt, samt inom social styrning, såsom utbildning av de anställda.</p> / <p><strong>Background: </strong>Real Estate Agents are today mainly compensated through commission for their main task; to mediate in Real Estate sales. There is a legislative proposal to authorize compensation for the disclosure of ancillary services such as mortgages. The risk with the proposal is that the Real Estate Agent’s role as an independent intermediate may disappear if the compensation for the disclosure of ancillary services is entirely commission based. Management must therefore develop effective control system to avoid adverse effects.</p><p><strong>Purpose:</strong> To develop a proposal for how companies can avoid adverse effects on a commission based compensation for ancillary services.</p><p><strong>Methodology:</strong> A qualitative case study has been carried out with individual, semi-structured interviews, a questionnaire survey and secondary sources.</p><p><strong>Result:</strong> The management should make use of a combined compensation of both fixed and variable pay for ancillary service brokerage. Furthermore, it should also take into account the measures in behavioral control, such as the design of efficient working processes, and social control, such as employee training.Key</p>

Recently, the widespread use of power system controllers, such as PSS and FACTS controllers, has led to the analysis of their effect on the overall stability of power systems. Many studies have been conducted to allocate FACTS controllers so that they achieve optimal power flow conditions in the context of Optimal Power Flow (OPF) analysis. However, these studies usually do not examine the effect of these controllers on the voltage and angle stability of the entire system, considering that the types of these controllers and their control signals, such as reactive power, current, or voltage, have significant effect on the entire system stability. <br /><br /> Due to the recent transition from government controlled to deregulated electricity markets, the relationship between power system controllers and electricity markets has added a new dimension, as the effect of these controllers on the overall power system stability has to be seen from an economic point of view. Studying the effect of adding and tuning these controllers on the pricing of electricity within the context of electricity markets is a significant and novel research area. Specifically, the link among stability, FACTS controllers and electricity pricing should be appropriately studied and modelled. <br /><br /> Consequently, in this thesis, the focus is on proposing and describing of a novel OPF technique which includes a new stability constraint. This technique is compared with respect to existent OPF techniques, demonstrating that it provides an appropriate modelling of system controllers, and thus a better understanding of their effects on system stability and energy pricing. The proposed OPF technique offers a new methodology for pricing the dynamic services provided by the system's controllers. Moreover, the new OPF technique can be used to develop a novel tuning methodology for PSS and FACTS controllers to optimize power dispatch and price levels, as guaranteeing an adequate level of system security. All tests and comparisons are illustrated using 3-bus and 14-bus benchmark systems.

Recently, the widespread use of power system controllers, such as PSS and FACTS controllers, has led to the analysis of their effect on the overall stability of power systems. Many studies have been conducted to allocate FACTS controllers so that they achieve optimal power flow conditions in the context of Optimal Power Flow (OPF) analysis. However, these studies usually do not examine the effect of these controllers on the voltage and angle stability of the entire system, considering that the types of these controllers and their control signals, such as reactive power, current, or voltage, have significant effect on the entire system stability. <br /><br /> Due to the recent transition from government controlled to deregulated electricity markets, the relationship between power system controllers and electricity markets has added a new dimension, as the effect of these controllers on the overall power system stability has to be seen from an economic point of view. Studying the effect of adding and tuning these controllers on the pricing of electricity within the context of electricity markets is a significant and novel research area. Specifically, the link among stability, FACTS controllers and electricity pricing should be appropriately studied and modelled. <br /><br /> Consequently, in this thesis, the focus is on proposing and describing of a novel OPF technique which includes a new stability constraint. This technique is compared with respect to existent OPF techniques, demonstrating that it provides an appropriate modelling of system controllers, and thus a better understanding of their effects on system stability and energy pricing. The proposed OPF technique offers a new methodology for pricing the dynamic services provided by the system's controllers. Moreover, the new OPF technique can be used to develop a novel tuning methodology for PSS and FACTS controllers to optimize power dispatch and price levels, as guaranteeing an adequate level of system security. All tests and comparisons are illustrated using 3-bus and 14-bus benchmark systems.

Bakgrund/problem: Fastighetsmäklare ersätts idag främst genom provision för sitt huvuduppdrag fastighetsförmedling. Ett lagförslag vill tillåta ersättning för förmedling av sidotjänster som exempelvis bolån. Risken med lagförslaget är att mäklarens roll som oberoende mellanman försvinner om ersättningen för sidotjänstförmedling är uteslutande provisionsbaserad. Ledningen måste därför utforma välfungerande styrsystem för att undvika negativa effekter. Syfte: Att utforma ett förslag till hur företag kan undvika negativa effekter vid provisionsbaserad ersättning för sidotjänster. Metod: En kvalitativ fallstudie har genomförts med individuella, semistrukturerade intervjuer, enkätundersökning samt sekundärkällor. Resultat: Företagsledningen bör använda sig av ett kombinerat ersättningssystem med både fast och rörlig lön för sidotjänstförmedling. Vidare bör även hänsyn tas till åtgärder inom beteendestyrning, såsom utformning av välfungerande processer för de anställdas arbetssätt, samt inom social styrning, såsom utbildning av de anställda. / Background: Real Estate Agents are today mainly compensated through commission for their main task; to mediate in Real Estate sales. There is a legislative proposal to authorize compensation for the disclosure of ancillary services such as mortgages. The risk with the proposal is that the Real Estate Agent’s role as an independent intermediate may disappear if the compensation for the disclosure of ancillary services is entirely commission based. Management must therefore develop effective control system to avoid adverse effects. Purpose: To develop a proposal for how companies can avoid adverse effects on a commission based compensation for ancillary services. Methodology: A qualitative case study has been carried out with individual, semi-structured interviews, a questionnaire survey and secondary sources. Result: The management should make use of a combined compensation of both fixed and variable pay for ancillary service brokerage. Furthermore, it should also take into account the measures in behavioral control, such as the design of efficient working processes, and social control, such as employee training.Key