D. Phil. / Conventional internal wind tunnel balances are designed and constructed to accommodate foil strain gauges which measure the deformation (strain) of the material. Foil strain gauge balances are known to be affected by electromagnetic interference and temperature. These balances are expensive and their manufacture is time consuming. With an increasing demand for higher accuracy, stiffness, increased resolution and temperature compensation, current balance designs are becoming inadequate. To overcome identified balance deficiencies a research programme in the application of optical Bragg gratings to wind tunnel balances was initiated. In this programme a new concept of using optical fibre Bragg grating sensors, with the advantage of using mechanical amplification to increase sensitivity, and the implementation of temperature compensation techniques was demonstrated on a simulated two component balance.

Theoretical and experimental studies of real-time interrogation of fiber Bragg grating (FBG) sensors based on chirped pulse compression with increased interrogation resolution and signal-to-noise ratio are presented. Two interrogation systems are proposed in this thesis. In the first interrogation system, a linearly chirped FBG (LCFBG) is employed as the sensing element. By incorporating the LCFBG in an optical interferometer as the sensor encoding system, employing wavelength-to-time mapping and chirped pulse compression technique, the correlation of output microwave waveform with a chirped reference waveform would provide an interrogation result with high speed and high resolution. The proposed system can provide an interrogation resolution as high as 0.25 μ at a speed of 48.6 MHz. The second interrogation system is designed to achieve simultaneous measurement of strain and temperature. In this system, a high-birefringence LCFBG (Hi-Bi LCFBG) is employed as a sensing element.

The development of communications technologies has led to an ever-increasing requirement for a wider bandwidth of microwave signal processing systems. To overcome the inherent electronic speed limitations, photonic techniques have been developed for the processing of ultra-broadband microwave signals. A dispersive delay line (DDL) is able to introduce different time delays to different spectral components, which are used to implement signal processing functions, such as time reversal, time delay, dispersion compensation, Fourier transformation and pulse compression. An electrical DDL is usually implemented based on a surface acoustic wave (SAW) device or a synthesized C-sections microwave transmission line, with a bandwidth limited to a few GHz. However, an optical DDL can have a much wider bandwidth up to several THz. Hence, an optical DDL can be used for the processing of an ultra-broadband microwave signal. In this thesis, we will focus on using a DDL based on a linearly chirped fiber Bragg grating (LCFBG) for the processing of broadband microwave signals. Several signal processing functions are investigated in this thesis. 1) A broadband and precise microwave time reversal system using an LCFBG-based DDL is investigated. By working in conjunction with a polarization beam splitter, a wideband microwave waveform modulated on an optical pulse can be temporally reversed after the optical pulse is reflected by the LCFBG for three times thanks to the opposite dispersion coefficient of the LCFBG when the optical pulse is reflected from the opposite ends. A theoretical bandwidth as large as 273 GHz can be achieved for the time reversal. 2) Based on the microwave time reversal using an LCFBG-based DDL, a microwave photonic matched filter is implemented for simultaneously generating and compressing an arbitrary microwave waveform. A temporal convolution system for the calculation of real time convolution of two wideband microwave signals is demonstrated for the first time. 3) The dispersion of an LCFBG is determined by its physical length. To have a large dispersion coefficient while maintaining a short physical length, we can use an optical recirculating loop incorporating an LCFBG. By allowing a microwave waveform to travel in the recirculating loop multiple times, the microwave waveform will be dispersed by the LCFBG multiple times, and the equivalent dispersion will be multiple times as large as that of a single LCFBG. Based on this concept, a time-stretch microwave sampling system with a record stretching factor of 32 is developed. Thanks to the ultra-large dispersion, the system can be used for single-shot sampling of a signal with a bandwidth up to a THz. The study in using the recirculating loop for the stretching of a microwave waveform with a large stretching factor is also performed. 4) Based on the dispersive loop with an extremely large dispersion, a photonic microwave arbitrary waveform generation system is demonstrated with an increased the time-bandwidth product (TBWP). The dispersive loop is also used to achieve tunable time delays by controlling the number of round trips for the implementation of a photonic true time delay beamforming system.

Deep-ocean pressure measurements are a necessary component for ocean characterization and oceanographic monitoring. Some principle applications such as tsunami detection and ocean floor subsidence are reliant on deep-ocean pressure measurement data. The deep ocean is a challenging environment especially for pressure measurements; discerning pressure changes that are a small fraction of the ambient pressure calls for intelligent engineering solutions. An ocean-deployable concept model of a pressure sensor is developed. The design is based on a diaphragm transducer intended for measuring hydrostatic pressure changes on the order of 1 centimeter of water (cmH2O) while exposed to ambient pressures several orders of magnitude greater for up to 2500 meters of water (mH2O). Two laboratory-scale pressure sensors are fabricated to test the fundamental principle of the proposed concept at lab-safe pressures. One is a single-sided sensor exposed to atmospheric pressure. The second sensor is a two-sided design that operates at a defined target depth pressure and measures the differential pressure across both faces of the diaphragm. The sensor design built for atmospheric pressure testing observed a mean experimental sensitivity of 6.05 pm/cmH2O in contrast to 6 pm/cmH2O determined theoretically. The percent error between the experimental and theoretical values is 0.83%. The second design was tested at target depth pressures of 10, 20, 40, and 60 psi (7, 14, 28, and 42 mH2O) and performance was within 5.8%, 2.8%, 0.7%, 4.0% respectively when considering percent error of the mean experimental and theoretical. The repeatability was sufficient for a given sample and pressure response within the range proposed in theory when a pressure preload was present to the diaphragm. Future work will aim at developing a design concept that incorporates a piston and is tested at a higher hydrostatic pressure system, and within ocean waters. A deployment plan and consideration of challenges associated with ocean testing will be accounted for. / Graduate

This master thesis deals with problematics of information transmission trough optical fiber and spreading of the electromagnetic field at wavelengths of light. There are analyzed characteristics of the optical signal, and described methods of measuring wavelength of the optical signal power and noise level of the useful signal. Another examined parameter is OSNR at the input and on the output of the optical fiber amplifier EFDA.

The diploma thesis described the basic principles and characters of the long period fiber gratings (LPFGs). Our concern was to describe basic mathematical description of these gratings needed to their modelation and simulation. Consequently some exact models leading to changes in the shape of the spectrum LPFGs were suggested, these methods were the chirping, apodization and changes in the average refractive index navg. In the Matlab environment, programes for counting the important parametres LPFGs were created and meanwhile each model leading to the change in the shape of the spectrum was simulated.

In this thesis, a method to improve survivability is developed for fiber Bragg gratings under high velocity impact in dynamic body armor shape sensing applications by encasing the fiber in silicone. Utilizing the slipping of the fiber within the silicone channel, a proportionality relationship between the strain of the fiber to the acceleration of the impacting projectile is found and is used to obtain the rate of the back-face deformation. A hybrid model is developed to handle errors caused by the stick-slip of the fiber by fitting an inverse exponential to stuck sections found in a captured strain profile and double integrated to transform the stuck section to its equivalent slipping. Displacement errors below 10% was achieved using the hybrid model. A graphical user interface with a step-by-step walkthrough and a fiber Bragg grating interrogation system was designed for test engineers to utilize this technology. Test engineers from the Army Test Center in Aberdeen, MD were trained on this technology and successfully captured and processed shots using this technology. A method for cutting Silicon through wire-EDM machining is developed by utilizing the photoconductive properties of Silicon. Cut rates for unilluminated and illuminated Silicon was compared and a 3x faster cut was achieved on the illuminated cuts.

Volvo Cars is in a change of producing only electric and hybrid cars by 2025.Subcomponent testing is a crucial part to ensure the quality of the individual buildingblocks in an electric machine. Any way of making these tests more reliable and less timeconsuming is of great interest at Volvo. Force and temperature on bearings are especiallyhard to measure accurately, because of their placement and dynamic behavior. Accurateand reliable measurements is also a vital part in creating realistic Computer-AidedEngineering (CAE) models for simulation purposes. Simulations on bearings could lead tobetter bearing choices and accelerate the design process. This could increase bearing lifeand increase the Electrical Vehicle (EV) range due to minimized friction losses. FiberBragg Grating (FBG) sensors is a technology that has some key advantages overconventional sensors. They are immune to EMI, smaller in size, can have multiple sensorsin one fiber and can measure multiple physical quantities at the same time. Volvo Cars isinterested in investigating whether this sensor technology could be a candidate forreplacing some of the current measurement setup configurations.The project was divided into three parts, validating sensor equipment, find method forinstallation and measurement on a bearing and development of a CAE model for bearinglosses and heat transfer. To validate the sensor equipment a Measurement SystemAnalysis (MSA) was performed on two FBG fibers, one FBG isolated from strain fortemperature measurement and one FBG array with multiple sensing points. From theMSA it could be seen that the FBG temperature sensor had a total uncertainty of 3.4 °CThe FBG array had a strain uncertainty of 1.04 μ𝜀 and a temperature uncertainty of 0.4 °C.The uncertainty of both the FBG array and the FBG temperature sensor is highlydependent on the calibration of the sensitivity constant. The force measurement on thebearing was done with a concept based on the wavelength difference, produced by strain,between two FBG sensors. The concept was tested in a dynamic component rig where anaxial force could be applied, and the wavelength difference measured. The temperatureon the outer ring of the bearing was measured using an FBG isolated from strain. The testresults were promising, but since the FBG is sensitive to temperature and strain theincreased temperature difference between the two fibers affected the results. Thecalibration method needs to be compensated for the increased temperature differencebetween the fibers which is generated when the rotational speed is increased, and thiscould not be done with a single temperature measurement. The two developed CAEmodels was both constructed in MATLAB and showed similar behavior with experimentaltests done by others. To validate the models, physical test for heat transfer and bearinglosses should be performed.

Radiotherapy is one of the most used methods for treating cancer and the most common way to execute such treatments is to irradiate tumors with high energy photons. This can damage healthy tissue along the irradiation line. By using hadron therapy and instead irradiate the tumor with charged particles (protons or Carbon 12 ions), the energy can be concentrated to a more specific place in the body. However, the method is not well studied and the tools available for simulating hadron therapy can be hard to use. When simulating hadron therapy and other nuclear interactions a large amount of calculations need to be executed. Monte Carlo methods is a numerical method to solve equations based on repeated number sampling and is used in the simulation program Geant4. Hadron therapy was simulated with Geant4 and the data was analyzed with the data analysis framework ROOT. New macros and analysis scripts were created with the intention to help new Geant4 users. The aim to make Geant4 easier to use was partially met. The implementation of code for the low energy region of Carbon 12 projectiles was unsuccessful.

The main objective of this thesis is to explore the use of volume holographic elements recorded in photo-thermo-refractive (PTR) glass for power scaling of narrow linewidth diffraction-limited fiber lasers to harness high average power and high brightness beams. Single fiber lasers enable kW level output powers limited by optical damage, thermal effects and non-linear effects. Output powers can be further scaled using large mode area fibers, however, at the cost of beam quality and instabilities due to the presence of higher order modes. The mechanisms limiting the performance of narrow-linewidth large mode area fiber lasers are investigated and solutions using intra-cavity volume Bragg gratings (VBG) proposed. Selfpulsations-free, completely continuous-wave operation of a VBG-stabilized unidirectional fiber ring laser is demonstrated with quasi single-frequency ( < 7.5 MHz) output. A method for transverse mode selection in multimode fiber lasers to reduce higher order mode content and stabilize the output beam profile is developed using angular selectivity of reflecting VBGs. By placing the VBG output coupler in a convergent beam, stabilization of the far-field beam profile of a 20 μm core large mode area fiber laser is demonstrated. Beam combining techniques are essential to power scale beyond the limitations of single laser sources. Several beam combining techniques relevant to fiber lasers were compared in this study and found to be lacking in one or more of the following aspects: the coherence of the individual sources is compromised, the far-field beam quality is highly degraded with significant power in iv side lobes, spectrally broad and unstable, and uncertainty over scaling to larger arrays and higher power. Keeping in mind the key requirements of coherence, good far-field beam quality, narrow and stable spectra, and scalability in both array size and power, a new passive coherent beam combining technique using multiplexed volume Bragg gratings (M-VBGs) is proposed. In order to understand the mechanism of radiation exchange between multiple beams via these complex holographic optical elements, the spectral and beam splitting properties a 2nd order reflecting M-VBG recorded in PTR glass is experimentally investigated using a tunable single frequency seed laser. Two single-mode Yb-doped fiber lasers are then coherently combined using reflecting M-VBGs in both linear and unidirectional-ring resonators with > 90% combining efficiency and diffraction-limited beam quality. It is demonstrated that the combining bandwidth can be controlled in the range of 100s of pm to a few pm by angular detuning of the M-VBG. Very narrow-linewidth ( < 210 MHz) operation in a linear cavity and possibility of singlefrequency operation in a unidirectional ring cavity of the coherently combined system is demonstrated using this technique. It is theoretically derived and experimentally demonstrated that high combining efficiency can be achieved even by multiplexing low-efficiency VBGs, with the required diffraction efficiency of individual VBGs decreasing as array size increases. Scaling of passive coherent beam combining to four fiber lasers is demonstrated using a 4th order transmitting M-VBG. Power scaling of this technique to 10 W level combined powers with 88% combining efficiency is demonstrated by passively combining two large mode area fiber lasers using a 2nd order reflecting M-VBG in a unidirectional ring resonator. High energy compact single-frequency sources are highly desired for several applications – one of which is as a seed for high power fiber amplifiers. Towards achieving the goal of a monolithic solid-state laser, a new gain medium having both photosensitive and luminescence properties is investigated – rare-earth doped PTR glass. First lasing is demonstrated in this new gain element in a VBG-stabilized external cavity.