A esclerose múltipla é a principal doença desmielinizante do sistema nervoso central (SNC). É considerada a principal causa de incapacidade neurológica em adultos jovens. O comprometimento cognitivo é muito comum nessa doença, envolvendo o aprendizado, a memória e a organização cortical do movimento, funções vitais que são reguladas pelo sistema colinérgico. O modelo de desmielinização tóxica induzida pelo brometo de etídio (BE) foi utilizado neste estudo, para avaliar a atividade da enzima acetilcolinesterase (AChE) no estriado (ST), hipocampo (HP), córtex cerebral (CC), hipotálamo (HY) e ponte (PN) associado ao tratamento com interferon beta (IFN-b), ciclosporina A (CsA), vitamina E (vit E) e ebselen (Ebs). Além disso, também foi investigado o efeito in vitro do BE na atividade da AChE, juntamente com os parâmetros cinéticos dessa enzima no ST, HP, CC e CB de ratos adultos. Os resultados demonstraram que o BE inibiu significativamente a atividade da AChE no ST, HP, CC e CB nas concentrações de 0,00625, 0,0125, 0,025, 0,05 e 0,1mM e a análise dos dados cinéticos mostraram uma inibição do tipo incompetitiva no ST, HP e CC, enquanto no CB a inibição foi do tipo mista. No estudo in vivo, foi observado uma inibição na atividade da AChE no CC, ST, HP, HY, PN e CB nos diferentes períodos avaliados pós-injeção do BE (3, 7, 15, 21 e 30 dias). Quando ratos desmielinizados com BE foram tratados com IFN-b e CsA, não houve alteração na atividade dessa enzima. Por outro lado, o tratamento com Vit E e Ebs foram capazes de aumentar a atividade da AChE no ST, CC e HP. Estudos imuno-histoquímicos demonstraram que nos ratos tratados com Vit E e Ebs as lesões induzidas pelo BE foram menores, sugerindo que estes compostos interferem no desenvolvimento de lesões desmielinizantes. Foi também avaliado o efeito per se do IFN-b, da CsA, da Vit E e do Ebs na atividade da AChE, os quais demonstraram um efeito inibitório sobre a atividade dessa enzima. Em plaquetas de ratos desmielinizados, foi observado uma diminuição na atividade da NTPDase e o tratamento com a Vit E e o Ebs modularam a hidrólise dos nucleotídeos de adenina. O presente trabalho demonstrou que o BE é um potente inibidor da atividade da AChE in vitro e os resultados in vivo demonstraram que a atividade dessa enzima está alterada após um evento de desmielinização tóxica no SNC. Os resultados deste estudo ajudaram a confirmar que drogas utilizadas no tratamento de pacientes com esclerose múltipla tais como o IFN-b e a CsA causam efeitos na atividade da AChE. A Vit E e o Ebs, além de demonstrarem uma interação com a neurotransmissão colinérgica, também modularam a hidrólise dos nucleotídeos de adenina em plaquetas de ratos, contribuindo no controle da coagulação plaquetária em processos desmielinizantes. Neste contexto, sugere-se que o IFN-b, a CsA, a vitamina E e o ebselen podem ser investigados em estudos futuros com a intenção de encontrar uma melhor terapia para beneficiar pacientes com patologias desmielinizantes. / Multiple sclerosis is the main demyelinating disease of the central nervous system (CNS). It is the most common cause of neurological disability among young adults. The cognitive impairment is very commum in this illness, involving learning, memory and cortical organization of the movement, vital functions regulated by the cholinergic system. The model of toxic demyelination induced by ethidium bromide (EB) was used to evaluate brain acetylcholinesterase (AChE) activity in the striatum (ST), hippocampus (HP), cerebral cortex (CC), cerebellum (CB), hypothalamus (HY) and pons (PN), associated with treatment with interferon beta (IFN-b), ciclosporine A (CsA), vitamin E (Vit E) and ebselen (Ebs). In addition, the per se effect of EB on AChE activity was studied in vitro together with the kinetic parameters of this enzyme in the ST, HP, CC and CB of adult rats. The results showed that EB in vitro significantly inhibited AChE activity in the ST, HP, CC and CB at concentrations of 0.00625, 0.0125, 0.025, 0.05 and 0.1mM. The kinetic analysis demonstrated an uncompetitive inhibition in the ST, HP and CC, whereas in the CB the inhibition type was mixed. In relation to the in vivo results, AChE activity was inhibited after demyelination by EB in the CC, ST, HP, HY, PN and CB at the post-injection points of time evaluated (3-7-15-21 and 30 days). When demyelinated rats were submitted to the treatment with IFN-b and CsA, the results demonstrated that these compounds did not alter AChE activity. However, Vit E and Ebs were able to increase AChE activity in the ST, CC and HP. In addition, immunohistochemistry studies demonstrated that in Vit E and Ebs treated rats, the lesions induced by EB were smaller suggesting that these compounds somehow interfered in the development of the lesions. The per se effect of IFN-b, CsA, Vit E and Ebs were also evaluated, demonstrating that these compounds have an inhibitory effect on AChE activity. Platelets of the demyelinated rats demonstrated a reduction in NTPDase activity and the treatments with Ebs and Vit E modulated adenine nucleotide hydrolysis. The present investigation demonstrated that EB is a strong inhibitor of AChE activity in vitro and the results in vivo showed that the activity of this enzyme is altered after an event of toxic demyelination in the CNS. The results this study help the confirm that drugs used in the treatment of the patients with multiple sclerosis such as IFN-b and CsA cause effects in the AChE activity. The Vit E and Ebs besides of interaction with the cholinergic neurotransmission also modulated adenine nucleotide hydrolysis in platelets of the rats, contributing to the control of the platelet coagulant status in the demyelinating process. In this context, we can suggest that IFN-b, CsA, Vit E and Ebs may be investigated in future studies with the intention of finding a better therapy for to improve patients with demyelinating pathologies.

No presente trabalho foi investigado o efeito do oligonucleotídeo-modelo 5-AAAAAAAAAA-3(ODN) sobre a estabilidade e estrutura de vesículas catiônicas de brometo de dioctadecildimetilamônio (DODAB), extrusadas através filtros de 100 nm, em dispersão aquosa, com as técnicas de espalhamento de luz dinâmico (DLS), medidas de potencial de superfície (potencial zeta), calorimetria diferencial de varredura (DSC), espalhamento de raios-X a baixos ângulos (SAXS), espectroscopias de absorção óptica e de fluorescência do estado estacionário da sonda Laurdan incorporada a vesículas de DODAB-ODN. Este fluoróforo monitora a polaridade e estrutura da superfície da membrana de DODAB. Variando a concentração de ODN, três diferentes regimes foram observados. Para baixas concentrações de ODN, ([ODN]/[DODAB]) 0.025 mM, a dispersão é estável, límpida, apesar do diâmetro médio das vesículas aumentar, um aumento de turbidez ser observado por medidas de Absorbância, e o SAXS já acusar a presença de algumas poucas multilamelas. As vesículas mistas apresentam potencial de superfície positivo, semelhante ao potencial medido para vesículas de puro DODAB. A calorimetria mostra a coexistência de regiões da bicamada de puro DODAB, e regiões mistas, com DODAB-ODN, sendo estas últimas mais estáveis, apresentando maior temperatura de transição gel-fluido. A forma e posição da banda de fluorescência do Laurdan incorporado às vesículas não são alteradas pela presença do oligonucleotídeo, indicando pouca variação na polaridade e estrutura da superfície da membrana mista monitorada pela sonda. Um segundo regime é observado para ([ODN]/[DODAB]) 0.05 mM, onde não é mais observado por calorimetria a presença significativa de domínios de puro DODAB, e a dispersão mostra-se instável, turva, com agregação/fusão das vesículas. Finalmente, o terceiro regime, para altas concentrações de ODN, ([ODN]/[DODAB]) 0.075 mM, onde é observado um potencial de superfície negativo, portanto, com predominância da carga do oligonucleotídeo, e a dispersão volta a ser estável, apresentando baixa turbidez. Neste regime, a calorimetria indica uma grande estabilidade da fase gel, medidas de SAXS mostram a formação de estruturas multilamelares, porém DLS indica a presença de vesículas pequenas, com dimensões às observadas para DODAB puro. Neste regime, a sonda Laurdan monitora variações na superfície da membrana, possivelmente indicando a diminuição da quantidade de moléculas de água na superfície e/ou um enrijecimento da bicamada. Os estudos aqui apresentados fazem parte de um amplo esforço para entender as características estruturais de agregados lipídio-material genético, com o objetivo de seu uso futuro em terapias gênicas. / In the present work the effect of 5\'-AAAAAAAAAA-3 \'oligonucleotide model (ODN) was investigated on the stability and structure of dioctadecyldimethylammonium bromide (DODAB) cationic vesicles, extruded through 100 nm filters in aqueous dispersion, with dynamic scattering techniques (DLS), surface potential measurements (zeta potential), differential scanning calorimetry (DSC), small angle X-ray scattering (SAXS), optical absorption spectrometry and stationary-state fluorescence spectroscopy of Laurdan incorporated into DODAB-ODN vesicles. This fluorophore monitors the polarity and surface structure of the DODAB membrane. Varying the ODN concentration, three different behaviors were observed. For low concentrations of ODN, ([ODN] / [DODAB]) 0.025 mM, the dispersion is stable, clear, although the mean diameter of the vesicles increases, an increase in turbidity is observed by Absorbance measurements, and SAXS already shows the presence of a few multilamellar structure. The mixed vesicles present positive surface potential, similar to the potential measured for pure DODAB vesicles. Calorimetry shows the coexistence of regions of the pure DODAB bilayer, and mixed regions, with DODAB-ODN, the latter being more stable, presenting a higher gel-fluid transition temperature. The shape and position of the Laurdan fluorescence band incorporated into the vesicles are not altered by the presence of the oligonucleotide, indicating minor variation in the polarity and surface structure of the mixed membrane monitored by the probe. A second behavior is observed for ([ODN] / [DODAB]) 0.05 mM, where the presence of pure DODAB domains is no longer detected by calorimetry, and the dispersion is unstable, cloudy, displaying vesicle aggregation/fusion. Finally, the third behavior is detected at high concentrations of ODN, ([ODN] / [DODAB]) 0.075 mM, where a negative surface potential is observed, therefore, with predominance of the charge of the oligonucleotide, and the dispersion is stable, exibiting low turbidity. In this regime, the calorimetry indicates a great stability of the gel phase, SAXS measurements show the formation of multilamellar structures, however DLS indicates the presence of small vesicles, with dimensions to those observed for pure DODAB. In this region, the Laurdan probe monitors variations at the surface of the membrane, possibly indicating the decrease in the amount of water molecules on the surface and/or a stiffening of the bilayer. The studies presented here are part of a broad effort to understand the structural characteristics of \"lipid-genetic material\", aggregates, with the aim of their future use in gene therapies.

Por ser um semicondutor de elevado número atômico, elevada densidade de massa e largo gap de energia, o brometo de tálio (TlBr) é um material promissor para a detecção da radiação à temperatura ambiente. Entretanto, existem poucos trabalhos relacionados ao estudo deste material sob forma de filme fino policristalino para produção em grandes áreas como desejado para aplicações médicas. Neste trabalho, as técnicas de spray pyrolysis e evaporação térmica foram avaliadas como métodos alternativos para a deposição de filmes de TlBr policristalinos. Ambas as técnicas apresentam relativo baixo custo e podem facilmente ser expandidas para grandes áreas. O objetivos deste trabalho é o estudo da influência das principais condições de crescimento nas propriedades (estruturais, ópticas e elétricas) finais dos filmes de TlBr. Para os filmes produzidos por spray pyrolysis água mili-Q foi utilizada como solvente. A solução (0,10 g de TlBr dissolvidos em 100 g de água) foi agitada à temperatura de 70ºC. Cada deposição foi realizado mantendo os substratos (1cm x 1cm) à temperatura de 100ºC, com um fluxo de nitrogênio (N2) de 8 1/min e um fluxo de solução de aproximadamente 1/90 (ml/s). A distância bico de spray-substrato utilizada foi de 19 cm. Os filmes de TlBr evaporados foram crescidos pela evaporação térmica do material a partir de um cadinho de tungstênio. Um sistema de aquecimento dos substratos foi implantado e permitiu a variação da temperatura destes durante a deposição desde a temperatura ambiente até 200ºC. A separação substrato-superfície de evaporação, h, e o número de deposições por filme, n, também foram variados no intervalo de 3 a 9 cm e 1 a 4, respectivamente. A estrutura dos filmes foi investigada por Difração de Raio-x, a morfologia por Microscopia Eletrônica de Verredura e a composição através da Espectroscopia de Dispersão de Energia (EDS). Experimentos ópticos de transmitância em função do comprimento de ondas foram realizados para estimar o gap ótico dos filmes.As resistividades foram medidas a partir de experimentos de corrente em função da voltagem aplicada fluorescente (20 watts). Por fim, algumas amostras selecionadas foram expostas aos raios-X na faixa de diagnóstico mamográfico. As melhores propriedades foram obtidas para os filmes crescidos por evaporação térmica. A maior compactação e o maior gap óptico foram encontrados para os filmes produzidos a partir de h= 9 cm, os quais garantiram a maior sensibilidade para estes filmes quando expostos aos raios-X. Para os filmes produzidos pela deposição sequencial de várias camadas, a estrutura colunar dos filmes foi mantida para camadas superiores e resultados semelhantes para todas as amostras foram obtidos em relação ao gap óptico e à resistividade elétrica. Além disso, a sensibilidade a partir da utilização de raio-X na faixa mamográfica foi quadruplicada para o filme mais espesso. O aumento da temperatura do substrato resultou na maior compactação e homogeneidade no recobrimento do substrato. Entretanto, uma perda significativa de material durante a evaporação determinou filmes menos espessos em relação aos depósitos à temperatura ambiente. Variações cristalográficas e morfológicas foram obtidas entre os filmes depositados a diferentes temperaturas. Maiores valores gap foram obtidos para 150 e 200ºC. A caracterização elétrica dos filmes depositados a diferentes temperaturas foi limitada, neste trabalho, pela baixa pureza do pó utilizado para produção destes filmes. / Due to its high atomic number, high mass density and intrinsic band gap, thallium bromide (TlBr) is a promising semiconductor for room temperature operation for ionizing radiation detection. However, there are few works related to the study of this material in the polycrystalline thin film form for production in large areas (~ 40 x 40 cm2 ), as desired by medical applications. In this work, spray pyrolysis and thermal evaporation were used as alternative methods for the deposition of polycrystalline TlBr films. Both techniques present relative low cost and can be expanded for large areas. The aim of this work is to investigate the influence of the main growth conditions on the final structural, optical and electrical TlBr films properties. Films produced by spray pyrolysis used mili-Q water as solvent. The solution (0,10g of TlBr dissolved in 100g of water) was stirred at 70o C. Each deposition was performed maintaining the substrates (1cm2 ) at 100o C, the nitrogen rate at 8l/min and the solution flow at 1/90 ml/s approximately. The nozzle-spray to substrate distance was 19 cm. Evaporated TlBr films were grown by resistive thermal evaporation of purified material from a tungsten crucible. The substrate temperature was evaluated from room temperature to 200°C. The separation between evaporation source and substrates, h, and the number of depositions, n, were also varied from 3 cm up to 9 cm and from 1 up to 4, respectively. The structure of the crystals was investigated by X-ray Diffraction, the morphology by Scanning Electron Microscopy and the composition by Energy Dispersive X-Ray Spectroscopy. Optical experiments of absorbance as a function of wavelength were performed to estimate the optical gap of the TlBr films. Electrical resistivities were measured using current versus voltage experiments. The dark current was compared to the current under illumination with a fluorescent lamp (20 watts). Finally, some selected samples were exposed to X-ray in the range of mammography diagnosis. The best properties were obtained for films produced by resistive thermal evaporation. This technique allowed the production of films with thickness of approximately 28 µm, for a unique deposition of 12 minutes. However, bromine has lower vapor pressure than the thallium, what leads to a Br loss of about 10% in the composition of evaporated films. The smallest distribution of cracks and the largest optical gap were obtained for films produced at the lowest deposition rates. This leads also to a higher increase of the ratio between current under irradiation and in the dark, when the films were exposed to X-rays. For films produced at room temperature using sequential depositions, the columnar structure was kept for the superior layers and similar results for all samples were obtained in relation to optical gap and electrical resistivity. Moreover, for the thicker film, an increase of a factor 4 was observed for the ratio between current under irradiation using X-rays in the mammography range in relation to the dark. The higher substrate temperature leads to significant material loss during the evaporation and determined less thick films in relation to the ones deposited at room temperature. Structural and morphological variations were verified for films deposited at different temperatures. Larger gap values were found for 150 and 200ºC. For the electrical characterization of the films deposited at different temperatures an original powder with higher purity would be necessary. Moreover, due to the significant difference between bromine and thallium vapor pressures, better results would probably be obtained by a change to the hot-wall evaporation technique.

O desempenho animal pode ser melhorado pelo incremento na digestibilidade dos alimentos. Um dos elementos neste processo é a acurada caracterização da composição química. Objetivando avaliar quatro métodos para determinar o teor de lignina, foram estudadas cinco gramíneas: Brachiaria brizantha cv. Marandú, Brachiaria brizantha cv. Xaraés (MG-5), Panicum maximum cv. Mombaça, Pennisetum purpureum cv. Cameroon e Pennisetum purpureum cv. Napier. As frações fibrosas da parede celular (PC), fibra em detergente neutro (FDN) e fibra em detergente ácido (FDA) aumentaram conforme as plantas amadureceram, refletindo as mudanças na composição dos componentes da parede celular (celulose, hemicelulose e lignina). Os valores de PC foram superiores aos da FDN indicando solubilização da pectina e outros oligossacarídeos da parede celular na solução de detergente neutro. O método LDA apresentou os menores teores de lignina, evidenciando a solubilização de parte da lignina na solução de detergente ácido. Os resultados de LPer foram maiores que os de LDA, que pode ser devido à oxidação da celulose e pectina pelo permanganato de potássio. Os teores de LK foram maiores que os de LDA possivelmente por contaminação protéica, mas, menores que os de LPer. Os teores de LBA foram maiores que os outros três métodos. A digestibilidade acompanhou, de forma inversa, o estádio de maturidade das plantas. A digestibilidade in vitro apresentou forte correlação negativa com os teores de lignina para todos os métodos, menos para LPer. Encontrou-se um valor de relação de 2,23, entre os métodos LDA e LBA, que, ao ser aplicado, nos teores de LDA, resultou em reta similar ao da LBA. Chama a atenção como este valor de 2,23 é muito próximo ao 2,4 utilizado nas equações B2 e C das frações de carboidratos do \"Cornell Net Carbohydrate & Protein System\" e nas equações do National Research Counsil de 1996, para corrigir o teor de lignina. O método LBA é um método fácil e conveniente para determinar a concentração de lignina em forrageiras e uma boa opção para uso rotineiro nas análises de laboratório. / Animal performance can be improved by enhancing feed digestibility. One of the elements for this process is an accurate characterization of feedstuff chemical composition. With the objective of evaluating four methods used today for lignin determination, five grasses were used: Brachiaria brizantha cv. Marandú, Brachiaria brizantha cv. Xaraés (MG-5), Panicum maximum cv. Mombaça, Pennisetum purpureum cv. Cameroon e Pennisetum purpureum cv. Napier, All fibrous fractions, neutral detergent fiber (NDF), acid detergent fiber (ADF) and cell wall (CW), increased as the plants matured, reflecting the changes in the CW composition (cellulose, hemicellulose and lignin). The values obtained for CW were higher than those obtained for NDF, indicating solubilization of pectin and other cell wall oligosaccharides in the neutral detergent solution. The ADL method produced the lowest lignin values, reflecting lignin solubilization by the acid detergent solution. PerL results were higher than those of ADL, possibly due to hemicellulose and pectin oxidation by potassium permanganate. The values for KL were higher than those of ADL, possibly due to protein contamination, but were lower than PerL values. ABL values were the highest among all methods. Digestibility inversely followed plant maturity throughout the study. In vitro dry matter digestibility showed high negative correlation with lignin contents. A 2,23 ratio between ADL and ABL methods was found, which when applied to ADL values, resulted in a curve similar to ABL method curve. It is interesting to note that, this value of 2,23 is very close to the 2,4 used in carbohydrate fractions B2 and C of the \"Cornell Net Carbohydrate & Protein System\", for the correction of lignin content. The ABL method is easy and convenient for total lignin content determination in forages.

Master of Science / Department of Geology / Matthew Kirk / Groundwater from the High Plains aquifer is vital for food production and a growing human population in the Great Plains region of the United States. Understanding how groundwater quality is changing in response to anthropogenic and natural processes is critical to effectively managing this resource. Our study considers variation in groundwater geochemistry in the Great Bend Prairie aquifer, a portion of the High Plains aquifer in southcentral Kansas. We collected samples during summer 2016 from 24 monitoring wells and compared our results to data collected previously from the same wells from 1979 to 1987. We sampled 13 wells screened in the upper portion of the aquifer (avg. depth 72 ft), 10 wells screened near the aquifer base (avg. depth 141 ft), and one well screened in underlying bedrock. Compared to initial samples, samples we collected tended to have higher total dissolved solids (TDS) and nitrate content, particularly those we collected from the upper aquifer. Compared to initial samples, TDS was 78 mg/L higher in samples we collected from the upper aquifer and 373 mg/L lower in samples we collected from the aquifer base on average. Nitrate exceeded the U.S. standard for public supplies of drinking water (10 mg/L as N) in seven of the samples we collected, compared to only two samples collected previously. Compared to previous samples, nitrate concentrations were 9.5 and 3.9 mg/L as N higher on average in samples collected from the upper aquifer and aquifer base, respectively. Based on a mixing analysis, variation in the salinity of our samples primarily reflects the dilution of natural Permian brines by freshwater recharge throughout the area. However, salinity decreases observed in four samples reflects flushing of initial oil brine contamination over time, salinity increases in two samples may be due to evapotranspiration, and salinity increases in two samples may reflect migration of oil-brine contamination towards the site. Stable nitrogen (15N/14N) and oxygen (18O/16O) isotope ratios in our samples primarily fall within the range typical of nitrification of ammonium-based fertilizers with potential contributions from manure or sewage. In our analysis of the microbial community, we observed groups capable of denitrification, including genera within Nitrospirae, Firmicutes, and Proteobacteria. Despite their presence, our results demonstrate that water quality in the aquifer has degraded over the past 30 to 40 years due to nitrate accumulation.

Para quantificar o teor de lignina em alguns cultivares de aveia, foi utilizado o método espectrofotométrico "lignina solúvel em brometo de acetila – LSBA", onde a lignina é solubilizada em uma solução a 25% de brometo de acetila em ácido acético glacial e em seguida sua absorbância lida a 280 nm; como padrão de referência foi utilizada a lignina extraída da aveia através de uma solução ácida de dioxana. A quantificação da lignina foi realizada em oito cultivares de aveia, nas frações planta inteira, caule e folha, em três estádios de maturidade (45, 55 e 65 dias de idade). Os resultados obtidos foram comparados com três métodos gravimétricos: lignina detergente ácido (LDA), lignina permanganato de potássio (LPer) e lignina Klason (LK). Os quatro métodos estudados mostraram teores de lignina diferentes entre si. Os resultados de LSBA foram superiores para quase todos os cultivares, ocorrendo o inverso para a LDA. Houve uma pequena diferença em relação aos dias de corte, com dados superiores para LSBA, onde o caule apresentou maior variação em relação às demais frações. As curvas de regressão e os espectrogramas indicaram presença de diferenças qualitativas entre as ligninas provenientes da aveia forrageira nos diferentes estádios de maturidade. / To quantify lignin content in some varieties of oat, it was employed the spectrophotometric method acetyl bromide soluble lignin – ABSL where lignin is dissolved into a 25% acetyl bromide solution in glacial acetic acid and its absorbance read at 280 nm; as a standard it was employed a, lignin extracted by mild acidic dioxane solution from the same sample. Lignin quantification was evaluated in eight oat cultivars, divided in three vegetable parts (whole plant, stem and leaf), and three different maturity stages (cuts at 45, 55 and 65 days). Obtained results were compared with three gravimetric methods: acid detergent lignin (ADL), potassium permanganate lignin (PerL) and Klason lignin (KL). All four methodologies yielded different results. Overall, ABSL yielded highest values whereas ADL yielded the lowest ones. There was a slight difference related to maturity, with higher values for ABSL, where stem fraction showed higher variation when comparing to the two other vegetable parts. Regression equations and espectrograms indicated the presence of qualitative differences between lignins from at distinct maturity stages.

This diploma thesis deals with the use of fluorescence correlation spectroscopy technique for microrheological characterization of hydrogel in a system of hyaluronate-cetyltrimethylammonium bromide. Fluorescently labelled particles were used for microrheological FCS analysis. To optimize the method the most appropriate size of particles was chosen on the basis of Newtonian glycerol solutions analysis. Among other things, the discussion was focused on the influence of refractive index change of analysed solutions on analysis results. After hyaluronate solutions analysis it was possible to assess the biopolymer concentration and molecular weight impact on the FCS microrheology results, which could then be compared with analysis results of model hydrogels of hyaluronate and CTAB. Finally, usability and limitations of FCS microrheology have been discussed.

L'activation des gamétocytes de Plasmodium falciparum par exposition à l'acide xanthurénique à basse température conduit à la sortie de gamètes mâles et femelles matures des érythrocytes de l’hôte, ce qui est essentiel pour la fertilisation et la formation ultérieure de zygotes. Les gamètes possèdent des vésicules cytosoliques contenant une protéine formant des pores connue sous le nom de PfPLP2. Durant la sortie, les vésicules ayant PfPLP2 sont redistribuées du cytoplasme des gamètes à la périphérie. Puis ces vésicules vont sécréter PfPLP2 permettant ainsi la sortie des gamètes par perforation de la membrane érythrocytaire. Dans cette étude, nous avons identifié le rôle d'une phospholipase de type patatine A2 (PfPATPL1) dans la sortie de gamètes de P. falciparum. Nous avons utilisé une approche de génétique inverse pour générer un knock-down conditionnel de PfPATPL1 par fusion à un domaine de déstabilisation (DD). Nous avons modifié l’expression PfPATPL1 dans les gamétocytes de stade V en supprimant le ligand de Shield-1, ce qui nous a permis de constater l’importance de PfPATPL1 durant les différentes étapes de la gamétogenèse, ainsi que dans l'arrondissement des gamétocytes, la sortie des gamètes et l'exflagellation des gamètes mâles. Nous avons également trouvé que PfPATPL1 est nécessaire pour la redistribution des vésicules portant PfPLP2 à la périphérie des gamètes pendant sortie. De plus, nous avons utilisé un inhibiteur connu de la phospholipase du nom de bromure de 4-bromophénacyle (4-BPB) pour étudier l'importance de l'activité de la PLA2 dans la gamétogenèse. Nous avons découvert que le traitement par le 4-BPB entraîne également des anomalies dans l'arrondissement des gamétocytes, inhibe la sortie des gamètes et l'exflagellation des gamètes mâles. Et que ce même traitement au 4-BPB entravait la redistribution des vésicules contenant PfPLP2 à la périphérie des gamètes. Lorsque les moustiques ont été nourris avec des gamétocytes traités au 4-BPB dans un test d'alimentation membranaire standard (SMFA), nous avons observé une diminution significative du taux d'infection des moustiques et une chute drastique de la densité des oocystes et du nombre de moustiques infectés. Ces données suggèrent que PfPATPL1 est important pour le développement des gamètes chez les moustiques et peut constituer une cible prometteuse pour les stratégies d'intervention de transmissivité. / The activation of Plasmodium falciparum gametocytes by exposure to low temperature and xanthurenic acid leads to the egress of mature male and female gametes from host erythrocytes, which is essential for fertilization and subsequent zygote formation. Gametes contain cytosolic vesicles bearing a pore forming protein known as PfPLP2. During egress, PfPLP2 containing vesicles gets redistributed from gamete cytoplasm to periphery. Subsequently, PfPLP2 is secreted from these vesicles leading to perforation of host erythrocyte membrane resulting in gamete egress. In this study, we have identified the role of a patatin-like phospholipase A2 (PfPATPL1) in P. falciparum gamete egress. We have taken a reverse genetics approach to generate a conditional knock down of PfPATPL1 by fusion to a destabilization domain (DD). We have knocked down PfPATPL1 in Stage V gametocytes by removal of Shield-1 ligand and found that PfPATPL1 is required during different steps of gametogenesis including gametocyte rounding up, gamete egress and male gamete exflagellation. We have also found that PfPATPL1 is needed for redistribution of PfPLP2 bearing vesicles to the gamete periphery during egress. Additionally, we have utilized a known inhibitor of phospholipase A2 known as 4- bromophenacyl bromide (4-BPB) to study the importance of PLA2 activity in gametogenesis. We have found that 4-BPB treatment also leads to defects in gametocyte rounding up, inhibits gamete egress and male gamete exflagellation. 4-BPB treatment also hampers the redistribution of PfPLP2 containing vesicles to gamete periphery. When the mosquitoes were fed with 4-BPB treated gametocytes in a standard membrane feeding assay (SMFA), we observed a significant decline in mosquito infection rate and a drastic drop in oocyst density and number of infected mosquitos. These data suggests that PfPATPL1 is important for gamete development in mosquitos and may serve as a promising target for transmmision intervention strategies.

A simple synthesis of fresh alkyl iodides using alcohols and hydriodic acid (HI) is reported. The alkyl iodides were obtained in quick and easy work-up with good to excellent yields (66-94%) and very high purities (97-99%). Freshly prepared iodomethane and 1-iodobutane were applied to synthesize biologically relevant 3,7-dimethyladenine and 9-butyladenine, which were characterized thoroughly using 1D and 2D NMR, individually.

Enhanced biodegradation using carbon donor and microbial addition is being considered as a possible remediation technique for a trichloroethylene (TCE) contaminated area in Sunset, Utah, west of the source area on Hill Air Force Base. As a precursor to any in situ remediation attempts, several laboratory treatability experiments are being conducted, including the construction of microcosms and flow-through columns. Nine large-scale flow-through columns were built using site groundwater and aquifer material. Bromide tracer tests were conducted to establish and understand the hydraulic conditions within the columns prior to the commencement of the TCE biodegradation experiments. Four predictive models were created to show potential degradation scenarios in the columns and in the field using microcosm data for various system treatments. Treatments selected for modeling indicated that carbon addition alone is insufficient in stimulating dechlorination of TCE. Microbial amendments will be necessary in the column systems when the TCE dechlorination experiments begin.