Global ETD Search

71	Mechanistic approaches towards understanding particle formation in biopharmaceutical formations. The role of sufactant type and level on protein conformational stability, as assessed by calorimetry, and on protein size stability as assessed by dynamic light scattering, micro flow imaging and HIAC Vaidilaite-Pretorius, Agita January 2013 (has links) Control and analysis of protein aggregation is an increasing challenge to biopharmaceutical research and development. Therefore it is important to understand the interactions, causes and analysis of particles in order to control protein aggregation to enable successful biopharmaceutical formulations. This work investigates the role of different non-ionic surfactants on protein conformational stability, as assessed by HSDSC, and on protein size stability as assessed by Dynamic Light Scattering (DLS), HIAC and MFI. BSA and IgG2 were used as model proteins. Thermal unfolding experiments indicated a very weak surfactant-immunoglobulin IgG2 interaction, compared to much stronger interactions for the BSA surfactant systems. The DLS results showed that BSA and IgG2 with different surfactants and concentration produced different levels of particle size growth. The heat treatment and aging of samples in the presence of Tween 20, Tween 80, Brij 35 and Pluronic F-68 surfactants led to an increase in the populations of larger particles for BSA samples, whereas IgG2 systems did not notably aggregate under storage conditions MFI was shown to be more sensitive than HIAC technique for measuring sub-visible particles in protein surfactant systems. Heat treatment and storage stress showed a significant effect on BSA and IgG2 protein sub-visible particle size stability. This work has demonstrated that both proteins with different Tween 20, Tween 80, Brij 35 and Pluronic F-68 concentrations, have different level of conformational and size stability. Also aging samples and heating stress bears the potential to generate particles, but this depends on surfactant type. Poor predictive correlations between the analytical methods were determined.
72	Point-of-care beta-hydroxybutyrate determination for the management of diabetic ketoacidosis based on flexible laser-induced graphene electrode system Andersson, Simon January 2021 (has links) Diabetic ketoacidosis (DKA) is a life-threatening condition that can appear in patients with diabetes. High ketones in the blood lead to acidity of the blood. For DKA diagnosis and management, ketones such as hydroxybutyrate (HB) can be used to quantify the severity of the disease. The fabrication of electrochemical biosensors for the detection of HB is attractive since their capability to deliver fast response, high sensitivity, good selectivity and potential for miniaturisation. In this thesis, an integrated electrode system was prepared for the detection of HB. Laser-induced graphene (LIG) with a 3D porous structure was used as the flexible platform. Poly (toluidine blue O) (PTB) was electro-deposited on LIG (PTB/LIG) under the optimised conduction (pH of 9.7 and from 0.4 to an upper cyclic potential of 0.8 V). The single PTB/LIG working electrode demonstrated excellent performance towards the detection of NADH with a linear range of 6.7 M to 3 mM using chronoamperometry, high sensitivity of detecting NADH and excellent anti-fouling ability (94 % response current retained after 1500 s). Further integration of the 3-electrode system realised the static amperometric detection of NADH over the range of 78 M to 10 mM. Based on the excellent performance of PTB/LIG to NADH sensing, hydroxybutyrate dehydrogenase was immobilised via encapsulation with chitosan and polyvinyl butyral (PVB) which was used for HB biosensing over the linear range of 0.5 M to 1 mM with NAD+ dissolved in solution. In addition, the co-immobilisation of NAD+ and HBD on PTB/LIG was conducted by optimisation of enzyme and NAD+ amount per electrode, which shows excellent reproducibility and satisfactory HB biosensing performance. Further experiments to improve the long-term stability of the enzyme electrode is expected in the future. The proposed integrated electrode system also possesses the potential to extend to a multichannel sensor array for the detection of multiple biomarkers (e.g. pH and glucose) for diagnosis and management of DKA. Biosensor Hydroxybutyrate Point-of-care Electrochemical Enzyme HB HBD Dehydrogenase Ketosis Ketones Diabetes Immobilisation Chitosan Gluteraldehyde PVB NADH NAD+ eHealth Toluidine blue Cyclic Voltammetry Amperometry Potentiometry Electro Chemistry BSA Analytical Chemistry Analytisk kemi
73	Bovint serum albumin påverkar överlevnad och Aβ-nivåer i Alzheimers sjuka Drosophila flugor. : Bovine serum albumin affects survival and Aβ-levels in Alzheimer's diseased Drosophila flies. Tani, Milena January 2024 (has links) Alzheimer's disease (AD) was first described more than 100 years ago and is today the most common cause of dementia. It is one of the progressive neurodegenerative diseases that affect 47 million people around the world between the ages of 60 and 90. One of the contributing factors to AD is extracellular amyloid – β (Aβ) plaques that form as a result of protein aggregation. These Aβ proteins are neurotoxic, leading to degeneration of brain neurons and loss of cognitive abilities. Because AD largely affects society, researchers are constantly working to find a cure, which currently does not exist. The purpose of this study was to use Drosophila melanogaster as a living organism model for the expression of two types of Aβ proteins related to AD, Arctic (Glu22Gly) and TandemAβ, and to study the survival of these AD flies when Bovine serum albumin (BSA) was added to the fly food. The hypothesis was that BSA would be effective in slowing down and/or preventing formation of toxic Aβ-aggregates. The focus was therefore to investigate whether the AD flies would live longer if they were allowed to eat Bovine serum albumin and whether the soluble/insoluble Aβ levels in these flies would decrease in comparison to the control AD flies that were not allowed to eat BSA. The effect of BSA on toxicity was evaluated using survival assay on male flies and the levels of soluble/insoluble Aβ were evaluated using Meso Scale Discovery (MSD) on female flies. In both experiments, the following six groups of flies were examined: myow1118 ± BSA; myoArctic ± BSA; myoTandemAβ ± BSA. Conclusions from the studies are that the survival of AD flies could not be extended by adding 0.61 mM BSA to the food, rather the data showed a weak but significant toxic effect in the presence of BSA in the AD flies. However, MSD data showed a reduction of insoluble Aβ aggregates and an equilibrium shift from insoluble Aβ aggregates to soluble Aβ aggregates in the presence of BSA in the AD flies. Equilibrium shifts were particularly detectable in Myo-TandemAβ flies fed with BSA. In Myo-Arctic flies fed with BSA only reduction of insoluble Aβ could be detected. This shows that it is not the amount of Aβ aggregates that is decisive for toxicity, but rather the presence of specific aggregates that have toxic properties. If BSA shows good results in further studies, it could be used in the future to improve AD symptoms in patients. Drosophila melanogaster Alzheimer AD BSA Bovine serum albumin Human serum albumin HSA Toxicity Aβ survival assay MSD Meso Scale Discovery Arctic (Glu22Gly) TandemAβ oligomers fibrills GAL4-UAS TM6B CyO enterocytes Drosophila melanogaster bananfluga Alzheimers BSA Bovint serum albumin Aβ Amyloida plack Överlevnad MSD Meso Scale Discovery AD Toxicitet Arctic (Glu22Gly) TandemAβ HSA Humant serum albumin GAL4-UAS TM6B CyO fibriller oligomerer enterocyter Natural Sciences Naturvetenskap Other Chemistry Topics Annan kemi Biochemistry and Molecular Biology Biokemi och molekylärbiologi Other Biological Topics Annan biologi Genetics Genetik
74	Surface characterization and functional properties of carbon-based materials Nelson, Geoffrey Winston January 2012 (has links) Carbon-based materials are poised to be an important class of 21st century materials, for bio-medical, bio-electronic, and bio-sensing applications. Diamond and polymers are two examples of carbon-based materials of high interest to the bio-materials community. Diamond, in its conductive form, can be used as an electrochemical bio-sensor, whilst its nanoparticle form is considered a non-inflammatory platform to deliver drugs or to grow neuronal cells. Polymers, especially when chemically modified, have been used extensively in biological environments, from anti-microbial use to drug delivery. The large-scale use of either material for biological use is limited by two factors: ease of chemical modification and the paucity of knowledge of their surface chemistry in aqueous media. This thesis addresses aspects of both these issues. The first study reported is an in situ study of the adsorption dynamics of an exemplar globular protein (bovine serum albumin, BSA) on nanodiamond using the relatively novel quartz crystal microbalance with dissipation (QCM-D) technique. For the first time, QCM-D enabled the detailed study of protein dynamics (i.e. kinetics, viscoelastic properties, overlayer structure, etc.) onto nanodiamond thin films having various surface chemistry and roughness. The dynamics of protein adsorption is found to be sensitive to surface chemistry at all stages of adsorption, but it is only sensitive to surface roughness during initial adsorption phases. Our understanding of the nanodiamond-biology interface is enhanced by this study, and it suggests that QCM-D is useful for the study of the surface chemistry of nanoparticle forms of inorganic materials. A second study concerns a novel surface functionalization scheme, based on carbene and azo-coupling chemistry, which has been recently introduced as a practical, facile method for modifying the surfaces of polymers. Using modern surface characterization techniques, it is demonstrated that a chemical linker can be attached to polystyrene surfaces using carbene-based chemistry, and that further chemical functionality can be added to this chemical linker via an azo-coupling reaction. In situ studies of protein dynamics at these interfaces were conducted using QCM-D, thus enabling a link between specific protein behaviour and the polymer surface chemical termination chemistry to be made. A third area of study of investigates the use of diamond electrodes as a bio-sensor for dopamine under physiological conditions. For these conditions, ascorbic acid interferes with the dopamine oxidation signal, in ways that render the two signals irresolvable. Various modifications are used in attempts to reduce this interference, including: small and large cathodic treatments, grafting of electro-active polymers, addition of carbon nanotubes, and hydrogen plasma treatment. Those modifications leading to the hydrogen-termination of diamond are shown to work the best. Notably, hydrogen plasma treatment effects the complete electrochemical separation of dopamine and ascorbic acid at a diamond electrode. This is the first time this has been accomplished without adding non-diamond materials to the diamond electrode surface. 541
75	Protein Microparticles for Printable Bioelectronics Nadhom, Hama January 2015 (has links) In biosensors, printing involves the transfer of materials, proteins or cells to a substrate. It offers many capabilities thatcan be utilized in many applications, including rapid deposition and patterning of proteins or other biomolecules.However, issues such as stability when using biomaterials are very common. Using proteins, enzymes, as biomaterialink require immobilizations and modifications due to changing in the structural conformation of the enzymes, whichleads to changes in the properties of the enzyme such as enzymatic activity, during the printing procedures andrequirements such as solvent solutions. In this project, an innovative approach for the fabrication of proteinmicroparticles based on cross-linking interchange reaction is presented to increase the stability in different solvents.The idea is to decrease the contact area between the enzymes and the surrounding environment and also preventconformation changes by using protein microparticles as an immobilization technique for the enzymes. The theory isbased on using a cross-linking reagent trigging the formation of intermolecular bonds between adjacent proteinmolecules leading to assembly of protein molecules within a CaCO3 template into a microparticle structure. TheCaCO3 template is removed by changing the solution pH to 5.0, leaving behind pure highly homogenous proteinmicroparticles with a size of 2.4 ± 0.2 μm, according to SEM images, regardless of the incubation solvents. Theenzyme model used is Horse Radish Peroxidase (HRP) with Bovine Serum Albumin (BSA) and Glutaraldehyde (GL)as a cross-linking reagent. Furthermore, a comparison between the enzymatic activity of the free HRP and the BSAHRPprotein microparticles in buffer and different solvents are obtained using Michaelis-Menten Kinetics bymeasuring the absorption of the blue product produced by the enzyme-substrate interaction using a multichannelspectrophotometer with a wavelength of 355 nm. 3,3’,5,5’-tetramethylbenzidine (TMB) was used as substrate. As aresult, the free HRP show an enzymatic activity variation up to ± 50 % after the incubation in the different solventswhile the protein microparticles show much less variation which indicate a stability improvement. Moreover, printingthe microparticles require high microparticle concentration due to contact area decreasing. However, usingmicroparticles as a bioink material prevent leakage/diffusion problem that occurs when using free protein instead. Printed electronic ink ink materials biosensor protein immobilization modification free enzyme protein microparticles enzymatic activity structural conformation substrate Michaelis-Menten kinetic Km cross-linking TMB stability pH temperature buffer PBS solvents 2-Propanol Acetonitrile Ethylene Glycol incubation stability reagent Glutaraldehyde CaCO3 template HRP BSA-HRP MP contact area bioink leakage/diffusion drop-cast.
76	Development of High-throughput Membrane Filtration Techniques for Biological and Environmental Applications / Development of High-throughput Membrane Filtration Techniques Kazemi, Amir Sadegh 11 1900 (has links) Membrane filtration processes are widely utilized across different industrial sectors for biological and environmental separations. Examples of the former are sterile filtration and protein fractionation via microfiltration (MF) and ultrafiltration (UF) while drinking water treatment, tertiary treatment of wastewater, water reuse and desalination via MF, UF, nanofiltration (NF) and reverse-osmosis (RO) are examples of the latter. A common misconception is that the performance of membrane separation is solely dependent on the membrane pore size, whereas a multitude of parameters including solution conditions, solute concentration, presence of specific ions, hydrodynamic conditions, membrane structure and surface properties can significantly influence the separation performance and the membrane’s fouling propensity. The conventional approach for studying filtration performance is to use a single lab- or pilot-scale module and perform numerous experiments in a sequential manner which is both time-consuming and requires large amounts of material. Alternatively, high-throughput (HT) techniques, defined as the miniaturized version of conventional unit operations which allow for multiple experiments to be run in parallel and require a small amount of sample, can be employed. There is a growing interest in the use of HT techniques to speed up the testing and optimization of membrane-based separations. In this work, different HT screening approaches are developed and utilized for the evaluation and optimization of filtration performance using flat-sheet and hollow-fiber (HF) membranes used in biological and environmental separations. The effects of various process factors were evaluated on the separation of different biomolecules by combining a HT filtration method using flat-sheet UF membranes and design-of-experiments methods. Additionally, a novel HT platform was introduced for multi-modal (constant transmembrane pressure vs. constant flux) testing of flat-sheet membranes used in bio-separations. Furthermore, the first-ever HT modules for parallel testing of HF membranes were developed for rapid fouling tests as well as extended filtration evaluation experiments. The usefulness of the modules was demonstrated by evaluating the filtration performance of different foulants under various operating conditions as well as running surface modification experiments. The techniques described herein can be employed for rapid determination of the optimal combination of conditions that result in the best filtration performance for different membrane separation applications and thus eliminate the need to perform numerous conventional lab-scale tests. Overall, more than 250 filtration tests and 350 hydraulic permeability measurements were performed and analyzed using the HT platforms developed in this thesis. / Thesis / Doctor of Philosophy (PhD) / Membrane filtration is widely used as a key separation process in different industries. For example, microfiltration (MF) and ultrafiltration (UF) are used for sterilization and purification of bio-products. Furthermore, MF, UF and reverse-osmosis (RO) are used for drinking water and wastewater treatment. A common misconception is that membrane filtration is a process solely based on the pore size of the membrane whereas numerous factors can significantly affect the performance. Conventionally, a large number of lab- or full-scale experiments are performed to find the optimum operating conditions for each filtration process. High-throughput (HT) techniques are powerful methods to accelerate the pace of process optimization—they allow for multiple experiments to be run in parallel and require smaller amounts of sample. This thesis focuses on the development of different HT techniques that require a minimal amount of sample for parallel testing and optimization of membrane filtration processes with applications in environmental and biological separations. The introduced techniques can reduce the amount of sample used in each test between 10-50 times and accelerate process development and optimization by running parallel tests. Membrane filtration Ultrafiltration Downstream bio-processing High-throughput (HT) testing Wastewater treatment Hollow-fiber membranes Humic acids High-throughput filtration Design-of-experiments (DOE) Process optimization Microscale filtration Microfluidic flow control system Stirred well filtration SWF High-throughput hollow-fiber module HT-HF Constant TMP Constant flux Multi-modal filtration Bioseparation MMFC MS-PS-CFF PEG Dextran FITC-Dextran BSA DNA IgG α-lactalbumin Biomolecule separation Module hydrodynamics Concentration polarization Membrane fouling Micromixing Omega™ membrane Microscale processing Fouling test PVDF membrane Surface modification Polydopamine Membrane cleaning Membrane backwashing Sodium alginate Polyethersulfone PES Hydraulic permeability Membrane permeability ZeeWeed® membrane Filtration ionic strength Filtration pH Solution conditions Water treatment Environmental separations Biological separations

Page generated in 0.045 seconds