Lipossomas (LUV) são estruturas compostas por uma bicamada lipídica que se organizam de forma semelhante a vesículas, contendo um compartimento aquoso em seu interior. Têm sido avaliados como potenciais carreadores de fármacos. No entanto, após sua administração, in vivo, opsoninas do soro adsorvem-se em sua superfície contribuindo para que o sistema fagocitário mononuclear (SFM) reconheça essas partículas, favorecendo sua remoção da circulação. O sistema complemento (SC) parece ter papel importante neste processo, principalmente por gerar fragmentos ativos do componente C3 (C3b/iC3b) que se depositam nas vesículas lipossomais e são reconhecidos por receptores do complemento presentes, por exemplo, nos polimorfonucleares. Antioxidantes, como a quercetina, têm demonstrado importantes e benéficos efeitos sobre a saúde humana, porém sua baixa solubilidade em água e biodisponibilidade limitam seu uso. Assim, o desenvolvimento apropriado de carreadores de flavonoides seria de grande importância para sua aplicabilidade in vivo. O objetivo do presente trabalho é avaliar a ativação das proteínas do SC por lipossomas compostos de fosfatidilcolina de soja e colesterol (PC:CHOL) ou colesteril-etil-éter (PC:CHOL-OET), contendo ou não quercetina. O consumo das vias clássica (VC) e alternativa (VA) provocado pelas diferentes vesículas foi analisado por ensaio hemolítico e a quantificação de iC3b e anticorpos naturais (IgG e IgM) na superfície dessas partículas foi realizada através de kits de ELISA. A ativação de C3 por vesículas contendo ou não quercetina foi avaliada por imunoeletroforese bidimensional (IEF). Os resultados mostram que lipossomas vazios, compostos por grande quantidade de colesterol, consomem mais os componentes do complemento para ambas as vias, VC e VA. Ainda, a substituição de colesterol por colesteril-etil éter reduziu o consumo das duas vias, mas a ativação do SC ainda é dependente da quantidade deste composto. A incorporação de quercetina não alterou o consumo de ambas as vias. O depósito de iC3b, IgG ou IgM nas vesículas compostas de PC:CHOL-OET na proporção de massa 3:1 foi o menor comparado aos demais. A IEF mostrou que vesículas PC:CHOL vazias induzem maior clivagem de C3 em relação às vesículas PC:CHOL-OET. Ainda, a incorporação de quercetina reduz a conversão de C3 em seus fragmentos. Essas observações sugerem que a preparação lipossomal PC:CHOL-OET em proporção de massa 3:1 parece ser a mais adequada para dar continuidade aos estudos que deverão culminar na tentativa de utilizá-la como carreadora de quercetina para administração in vivo / Liposomes (LUV) are structures composed by lipid bilayer that are organized similarly to vesicles, containing an aqueous compartment inside. They have been evaluated as potential drug carriers, however, after in vivo administration, serum opsonins are adsorb on the surface, contributing to their clearance from the circulation by mononuclear phagocytes system (MPS). The complement system (CS) seems to play an important role in this process, mainly to generate active fragments of the C3 component (C3b/iC3b) that are deposited in the liposomal vesicles and are recognized by complement receptors present, for example, in polymorphonuclear cells. Antioxidants such as quercetin have demonstrated significant and beneficial effects on human health, but its low water solubility and bioavailability limit their use. Thus, the proper development of flavonoids carriers would be of great importance to its applicability in vivo. The objective of this study is to evaluate the activation of SC proteins by liposomes composed of soy phosphatidylcholine and cholesterol (PC: CHOL) or cholesteryl ethyl ether (PC: CHOL-OET), with or without quercetin. The consumption of the classical (CP) and alternative pathway (AP) caused by the different vesicles was analyzed by hemolytic assay and quantification of iC3b and natural antibodies (IgG and IgM) on the surface of these particles was performed using ELISA kits. The activation of C3 by vesicles with or without quercetin was assessed by two-dimensional immunoelectrophoresis (IEF). The results show that empty liposomes, composed of large amounts of cholesterol, consume more CS components in both pathways, CP and AP. Moreover the replacement of cholesterol by cholesteryl ethyl ether reduced the consumption of both pathways, but the activation of the SC is still dependent on the amount of the compound. The incorporation of quercetin did not alter the consumption of both pathways. The deposition of iC3b, IgG or IgM in vesicles composed of PC: CHOL-OET at mass ratio of 3:1 was the lowest compared to the others. The IEF showed that empty vesicles of PC:CHOL induce less cleavage of C3 in relation to vesicles of PC: CHOL-OET. In addition, the incorporation of quercetin reduces the conversion of C3 into its fragments. These observation suggest that the liposomes PC:CHOL at mass ratio 3:1 seems to be the most appropriate to continue the studies that could culminate in an attempt to use it as a carrier to administrate quercetin in vivo

Dois peptídeos, designados Let#1 e Let#2, foram delineados do segundo laço extracelular da proteína NaPi2b. Após conjugação, os peptídeos induziram produção de anticorpos específicos em coelhos e camundongos. Os anticorpos com maiores títulos foram selecionados para ensaios complementares. Estes anticorpos reconheceram os peptídeos conjugados aos carreadores pelos métodos de ELISA e WB, não havendo reação cruzada quando testados com a proteína carreadora livre e com antígeno sintético inespecífico. Após a completa validação, foi possível observar que os anticorpos anti-peptídeos reconhecem NaPi2b nativa, presente na superfície de células OV-CAR, bem como mostraram reconhecimento de um alvo comum em todos os soros analisados, mesmo quando o soro era considerado negativo para COV pelo teste comercial. Este reconhecimento não foi observado quando as amostras foram analisadas pelo soro pré-imune dos animais teste, sugerindo um reconhecimento específico dos anticorpos produzidos. / Two peptides, designated Let#1 and Let#2, were outlined from the second extracellular loop of the NaPi2b protein. After conjugation, the peptides induced the production of specific antibodies in rabbits and mice. Antibodies with higher titers were selected for complementary tests. These antibodies recognized peptides conjugated to the carrier by ELISA and WB, with no cross-reaction when tested with the free carrier protein and nonspecific synthetic antigen. After complete validation, it was observed that the anti-peptide antibodies recognize native NaPi2b protein present on the OV-CAR cell surface and showed recognizing a common target in all sera tested, even when the serum was considered negative for ovarian carcinonoma by commercial test. This recognition was not observed when the samples were analyzed by pre-immune serum of test animals, suggesting specific recognition of antibodies produced.

Orientador: Anita Jocelyne Marsaioli / Tese (doutorado) - Universidade Estadual de Campinas, Instituto de Química / Made available in DSpace on 2018-08-25T07:45:46Z (GMT). No. of bitstreams: 1 Martins_LucasGelain_D.pdf: 5948717 bytes, checksum: d64f37183bfefec1cedc88b263d32340 (MD5) Previous issue date: 2014 / Resumo: Nesta tese consiste no estudo de interações supramoleculares utilizando diferentes metodologias de Ressonância Magnética Nuclear de hidrogênio (RMN de 1H), tais como ROESY 1D, RMN-DOSY e RMN-STD. Os sistemas supramoleculares foram abordados em dois casos de estudo diferentes. O Capítulo I tem como objeto de estudo interações do fármaco Dapsona com diferentes carreadores de fármacos (ß-CD, SBE-ß-CD e lipossoma de EPC), com a finalidade de encontrar formulações nas quais a Dapsona seja mais solúvel. Os complexos binários e ternário formados foram determinadas por medidas de difusão molecular. Foram observadas as formações dos complexos Dap/ß-CD, Da-/SBE-ß-CD, Dap/EPC e o ternário Dap/ß-CD/EPC, os quais contribuem para o aumento de solubilidade do fármaco. O objeto de estudo apresentado no Capítulo II é a inibição da enzima acetilcolinesterase por dois alcaloides, a Fisostigmina e a Crinina. Para determinação das constantes de dissociação aparentes foram utilizados os crescimentos iniciais das curvas de saturação obtids por RMN-STD para construção das Isotermas de Langmuir. De acordo com os valores de constantes obtidos foi possível concluir que a AchE tem mais afinidade com a Fisostigmina do que com a Crinina / Abstract: This thesis consists of the supramolecular interactions study applying different Nuclear Magnetic Resonance methodologies (1H NMR) such as 1D ROESY, DOSY-NMR and STD-NMR. The supramolecular systems were addressed in two different case studies. In chapter I Dapsone solubility was the case study. To solve the solubility problem the interactions between Dapsone and various drug carriers (ß-CD , SBE-ß-CD and EPC liposome) were characterized in terms of the binary and ternary complexes structure using NMR method, such as 1D ROESY and STD-NMR and apparent association constants were determined by measuring molecular diffusion using DOSY-NMR. Dap/ß-CD, Dap/SBE-ß-CD, Dap/EPC and Dap/ß-CD/EPC complexes were observed and Dapsone water solubility was increased. The case study in Chapter II is the inhibition of acetylcholinesterase by two alkaloids, Physostigmine and Crinina. The apparent dissociation constants were determined using the initial growth saturation curves obtained by STD-NMRto construct the Langmuir isotherms. The constants showed that the AChE has more affinity for the Physostigmine than Crinine / Doutorado / Quimica Organica / Doutor em Quimica

In chemical-looping, a fuel is oxidised by a solid metal oxide, MeO, in one reactor: (2$n+m$)MeO+C$_{n}$H$_{2m}\rightarrow$(2$n+m$)Me+$m$H$_{2}$O+$n$CO$_{2}$. The exit gas yields pure CO$_{2}$ after the steam has been condensed. The reduced metal oxide, Me, is transferred to an oxidation reactor and regenerated: Me+air$\rightarrow$MeO. Adding these reactions, the fuel has been combusted, but the CO$_{2}$ has been separated from the nitrogen in air. In fact, it is in a suitable form for sequestration in the Earth where prevention of greenhouse gas emissions to the atmosphere is desired. Generally, Me is a transition metal and, to withstand many such redox cycles, it has to be supported on a suitable refractory oxide, with particles of the resulting construct being termed the "oxygen carrier". This Dissertation is concerned with the release and uptake of gaseous oxygen when Me is copper. In particular, the interest is in the following reaction at temperatures exceeding ~900°C undertaken in a fluidised bed reactor:$\\$ 4CuO$_{(s)}\Leftrightarrow$2Cu$_{2}$O$_{(s)}$+O$_{2(g)}$. (1)$\\$ The value of this reaction is that the oxygen released as part of a chemical looping scheme is important in combusting unreactive solid fuels, e.g. coal chars, whilst the Cu$_{2}$O could, in principle, be further reduced to Cu by the more reactive components of the fuel. This Dissertation investigates the development and characterisation of suitable, Cu-based oxygen carriers, which must (i) be inexpensive and easy to produce at a large scale and (ii) remain stable in prolonged operation in terms of mechanical integrity and chemical reactivity when fluidised. Here, a suitable oxygen carrier was developed, satisfying the above criteria, using a wet-mixing method and containing nominally 60 wt% CuO, 23 wt% Al$_{2}$O$_{3}$ and 17 wt% CaO. In particular, it was found that this oxygen carrier could operate between CuO and Cu$_{2}$O without problem in a circulating fluidised bed but agglomeration and de-fluidisation was observed when the carrier was re-oxidised from the Cu form. For design, it is important to understand the thermodynamics and kinetics of the release of gaseous O$_{2}$ from the oxygen carrier, because the combustion of the solid fuel depends critically on this reaction. A novel method was developed to measure experimentally the thermodynamics of reaction (1) for the supported copper oxide. It was found that the thermodynamic equilibrium deviated slightly from that of the pure CuO/Cu$_{2}$O system reported in the literature and that the enthalpy of reaction was lower by ~ 15%; the reasons for this are discussed. The rate of release of O$_{2}$ from the oxygen carrier was investigated using a thermogravimetric analyser and the activation energy for the forward reaction of (1) was found to be 59.7$\pm$5.6 kJ/mol, obtained after appropriate modelling of the external mass transfer resistances present in the experimental apparatus. A critical analysis of the seemingly disparate activation energies reported in the literature revealed that the activation energy of the forward step in reaction (1) was, in fact, similar for many CuO-based oxygen carriers supported on different materials. The associated pre-exponential factor for the forward rate constant was also determined in the present research, and the kinetic parameters were used in a numerical model to predict the behaviour of the oxygen carriers in a fluidised bed reactor. Excellent agreement between theory and experiment was found, confirming that the kinetic parameters obtained in this work reflect the intrinsic chemical kinetics of the oxygen carrier, rather than being totally dominated by transport effects.

A defect band is formed in hydrogenated amorphous silicon nitride (a-SiNx:H) due to current stressing of the material. This gives rise to an increase in conductivity, referred to as current induced conductivity. This thesis investigates the current transport mechanisms that occur in the induced defect band, by comparing the temperature dependence of the conductivity of several sets of a-SiNx:H thin film diodes. These sets were systematically current stressed to different levels with one set remaining unstressed. Samples with energy gaps of 2.06 eV and 2.28 eV were considered. We show that around room temperature a modified Poole-Frenkel description of conduction (i.e. field enhanced hopping of carriers via charged defect states) provides a good fit to the data. Using this model the activation energy of current transport was calculated and shown to depend on the material band gap. Data fitting to the Poole-Frenkel model provided further support for the field-assisted hopping mechanism. Previous investigations had suggested that the defect band resides in the lower half of the band gap, so that current transport through the defect band was then expected to be due to the movement of holes, in a manner consistent with Poole-Frenkel conduction. By considering samples grown on p-type and n-type substrates, we demonstrated that transport was indeed the result of the movement of holes through the defect states within the induced defect band. At lower temperatures the experimental data is poorly described by a modified Poole-Frenkel type process, so further mechanisms were considered, including variable-range hopping and nearest-neighbour hopping. Due to the similar nature and slight temperature dependence of each process, differentiating between the two mechanisms proved difficult. However, other factors such as the temperature range and defect density favoured variable-range hopping transport. By assuming this form of low temperature hopping transport, conduction through the defect-band of the a-SiNx:H, could then be convincingly explained over the entire temperature range from 320 K to 20 K in terms of two dominant transport mechanisms, Poole-Frenkel conduction and variable-range hopping.

Providence virus (PrV) is a member of the Tetraviridae, a family of small, positive sense, single-stranded RNA viruses, which characteristically infect the midgut tissue of heliothine larvae. PrV is the only known tetravirus that replicates in cultured insect cells. The virus comprises a monopartite genome resembling members of the genus Betatetravirus with the capsid precursor protein undergoing autoproteolytic cleavage at its C-terminus consistent with other tetravirus capsid precursor proteins. Analysis of viral cDNA predicted the presence of three potential overlapping gene products (from 5` to 3`): (1) p130, a protein of unrecognized nucleotide or amino acid homology with a 2A-like processing site at its N-terminus; (2) p104, the replicase ORF, which was found to be phylogenetically related to tombus-and umbraviruses replicases. The presence of a read-through stop signal in the p104 ORF was proposed to produce and amino terminal product with a predicted MW of 40 kDa (p40) and (3) the capsid protein precursor (81 kDa) which has two 2A-like processing sites at its N-terminus. Metabolic radiolabelling of viral translation products in persistently infected MG8 cells and in vitro translation of the individual ORFs were performed in order to analyse the expression of PrV gene products. p130 was translated with no evidence of 2A-like processing. Two products of 40 kDa and 104 kDa were translated from the p104 ORF, indicating that the read-through stop signal was likely to be functional. Finally, the capsid protein precursor ORF produced a major translation product of 68 kDa corresponding to the capsid protein precursor as well a peptide of 15 kDa that was attributed to the activity of the second 2A-like site at the N-terminus of the p81 ORF. The subcellular distribution of viral RNA (vRNA) and p40 in MG8 cells was investigated using immunofluorescence and biochemical fractionation. The results showed that p40/p104 and vRNA accumulated in polarized, punctate structures in some but not all MG8 cells and in some cases, co-localization was observed. This thesis concludes that PrV is a novel tetravirus with significant similarities plant carmolike viruses that should be re-classified at the family level.

La présente étude avait pour but d'identifier de nouvelles stratégies pour la présentation sélective d'enzymes à la surface de nanoparticules virales dans le but d’une application potentielle dans la technologie des biocapteurs ou des puces à protéines. Les potyvirus ont été choisis comme nanosupports modèles. Les Potyvirus, le genre le plus large de la famille des Potyviridae, la seconde plus grande famille de virus de plante, sont responsables de très graves pertes dans les cultures. Ils forment des capsides flexibles en forme de bâtonnet entourant une seule molécule d'ARN positif simple brin. Les événements moléculaires conduisant à la sélection et à l'encapsidation spécifiques de l'ARN potyviral sont inconnus. Afin de mieux exploiter le potentiel de ces virus comme nanosupports, la première étape de ce travail a porté sur l’étude, in vivo, du processus d'encapsidation de l'ARN de particules de potyvirus. Des études précédentes ont montré que la protéine d'enveloppe (CP) du virus de la pomme de terre A (PVA) interfère avec la traduction de l'ARN viral lorsqu'elle est fournie en excès en trans suggérant que cela pourrait se produire pour initier l’encapsidation de l’ARN viral. Dans cette étude, nous avons montré que cette inhibition est médiée par des interactions CP-CP co-traductionnelles se produisant entre deux populations de CP, produites en trans et en cis et permettant très probablement le recrutement spécifique de l'ARN potyviral pour son encapsidation. En accord avec les études d'assemblage in vitro publiées précédemment nous proposons un mécanisme selon lequel l’encapsidation de l'ARN viral est initiée par des interactions CP-CP co-traductionnelles. Dans la deuxième partie de ce travail, différentes approches ont été testées afin d’organiser des enzymes sur les plateformes virales dans le but d’optimiser la canalisation des intermédiaires réactionnels. Parmi les trois stratégies testées seule celle utilisant un peptide qui se liant aux anticorps, le peptide z33 de la protéine A de Staphylococcus aureus a été couronnée de succès. Une couverture de 87 % des sites sur les particules de potyvirus avec l'enzyme a été obtenue. Cette stratégie a été utilisée pour piéger deux enzymes, la 4-coumarate: coenzyme A ligase (4Cl2) et stilbène synthase (STS), catalysant des étapes consécutives dans la voie de synthèse de resvératrol à partir de lysats cellulaires solubles d’E. coli clarifiés, à la surface de particules de potyvirus immobilisées sur les parois d'un tube en polypropylène. Cette stratégie rassemble les approches ascendante et descendante pour construire des nanomatériaux à base de virus et offre un moyen efficace et économique pour co-immobiliser et purifier des enzymes / The present study intended to identify new strategies for the selective presentation of biocatalysts on the surface of viral nanoparticles with potential application in biosensor technology or protein chips. Potyviruses were chosen as model nanoscaffolds for biocatalysts. Potyviruses are the largest genus in the family Potyviridae and cause significant plant damage. They form flexible rod-shaped capsids surrounding a single stranded positive sense RNA molecule. The molecular events leading to the specific selection and encapsidation of potyviral RNA are unknown. To better exploit the potential of these viruses as nanocarriers, the first step in this study was to look into their in vivo RNA encapsidation process. Earlier studies showed that Potato virus A (PVA) coat protein (CP) interferes with viral RNA translation when provided in excess in trans and it was suggested this could occur to initiate viral RNA encapsidation. In this follow up study, we used the agroinfiltration approach for the transient expression of full length, truncated or mutated viral RNAs with wild type CP (CPwt) and showed that this inhibition is mediated by co-translational CPCP interactions occurring between two CP populations, produced in trans and in cis. Because CP inhibited translation of the entire viral genome and virus particles were formed later than during normal infection, it was assumed that the CP acted during this inhibition process to specifically recruit viral RNA for encapsidation. In line with previously published in vitro assembly studies, we propose a mechanism through which viral RNA encapsidation is initiated through co-translational CP-CP interactions. The second part of this work entailed the investigation of novel approaches for organizing biocatalysts on virus platforms. The aim was to control the display of enzymes on virus surfaces while maximizing channelling of reaction intermediates. Three strategies were tested but only one involving an antibody binding peptide, the z33 peptide from Staphylococcus aureus was successful. An 87 % occupancy of accessible sites on the potyvirus particles by the enzyme was achieved. The same strategy was used to graft potyvirus particles with two enzymes: 4- coumarate:coenzyme A ligase (4CL2) and stilbene synthase (STS), catalysing consecutive steps in resveratrol synthetic pathway or a protein chimera, generated by the genetic fusion of both enzymes. This was achieved by trapping either the monoenzymes or the protein chimera from clarified soluble E. coli cell lysates on to the surface of potyvirus particles preimmobilized in a polypropylene tube. Resveratrol was synthesized from both mono-enzymes and the protein chimera in solution and on potyvirus particles. This strategy brings together a bottom-up and top down approach for designing virus based nano-materials and offers a cost effective and efficient way to co-immobilize and purify enzymes.

Invertebrates do not possess an adaptive immune system, but rely on several mechanisms similar to the innate immune system of mammals. The synthesis and release of a host of potent antimicrobial proteins is an important component of this immune response. The antibacterial activity in the hemolymph of Ornithodoros savignyi is specific for Gram-positive bacteria, and the synthesis and release of the antibacterial factors need to be induced by challenging the ticks with heat-killed Gram-negative bacterial suspensions. The induction of the factors is very rapid, leading to a maximal response within one hour following bacterial challenge. The factors are stable at high temperatures, and were found to be protein in nature. By using reverse phase high performance liquid chromatography, four fractions exhibiting antibacterial activity were identified in the hemolymph of immune challenged ticks. Four antibacterial peptides were isolated from these fractions, and the mass analyses of the peptides indicate that there are at least two different antibacterial peptides present in the hemolymph. The N-terminal amino acid sequence of one of the peptides was determined, and the analysis showed that the peptide has high homology with defensin peptides isolated from other tick species. This led to the putative classification of the peptides as part of the invertebrate defensin family. The presence of lysozyme in O. savignyi was studied using molecular biological methods. Vertebrate and invertebrate lysozyme sequences were used to design a lysozyme-specific primer, which was used to amplify specific DNA products from whole tick cDNA using the polymerase chain reaction (PCR). The conditions for the amplification reaction were optimized, the products of the optimized reaction were cloned into a cloning vector and the nucleotide sequences of the products were determined. The nucleotide sequences were used for similarity searches of sequence databases to determine homology with sequences of known proteins. It is deduced the degenerate primer was not specific for lysozyme and did not playa significant role in the amplification of the PCR products. This method is thus not feasible for the investigation of the lysozyme of O. savignyi. / Dissertation (MSc (Biochemistry))--University of Pretoria, 2005. / Biochemistry / unrestricted

Today’s logistics practices are moving from inventory-based push supply chains to replenishment-based pull supply chains, leading to a lower and less centralized inventory, smaller shipment sizes, and more just-in-time deliveries. As a result, industries are now demanding greater reliability in freight transportation. Delays and uncertainty in freight transportation translate directly into additional inventory, higher manufacturing costs, less economic competitiveness for businesses, and higher costs of goods that are being passed on to the consumers. Given the growing demand in freight transportation, the emerging needs to better understand freight behavior for better policy and investment decisions, and the increasing role of reliability in freight transportation, this research aims at providing a) better understanding of how the freight system users value travel time reliability in their transportation decisions, and b) advanced methods in quantifying the user’s willingness to pay for the improvement of transportation related attributes, particularly travel time reliability. To understand how the freight industry values travel time reliability in their transportation decisions, and particularly the presence of user heterogeneity, this research designed and conducted a stated preference (SP) survey for freight users in road transportation. Based on the feedback received during the pilot stage, reliability was measured as the standard deviation of travel time and presented as a frequency of on-time and late delivery in the choice scenarios. The survey collected 1,226 responses from 159 firms in Florida between January and May 2016 via online and paper methods. Various modeling approaches were explored to estimate the willingness to pay (WTP) measures among freight users, including multinomial logit (MNL) and mixed logit model. Market segmentation and interaction modeling techniques were employed to investigate preference variations among user groups, commodity groups, product type, and various other shipment characteristics, including shipping distance and weight. In general, across all groups in the sample, values of $37.00 per shipment-hour ($1.53 per ton-hour) for travel time savings and $55.00 per shipment-hour ($3.81 per ton- hour) for improvements of reliability were found in this research. Furthermore, while investigating the effects of shipping characteristics on the user’s preference in WTP, the results suggested that shipping distance and weight were the two most important variables. The results of the study help advance the understanding of the impact of the performance of transportation systems on freight transportation, which will lead to policy and investment decisions that better serve the needs of the freight community.

The master thesis is dealing with the consumer protection in air transport. The legislation is primarily stipulated in the European Parliament and the Council of the European Union regulation, to whom is dedicated the beggining of this thesis. In next step the study is devoted to operating irregulariarities followed by problems concerning luggage that could potentially occur during transportation. The end of the theoretical part is discussing the companies that assist passengers in receiving their compensations from air carriers if they are entitled to it. The second section is mainly analytical and it is supported by the theory from the first part of the thesis. Research is done within this part via method of questioning. The aim of the thesis is checking the awareness of passengers about their rights whilst using air transport. The thesis also contains subgoal which is a summary of a basic overview of consumer protection legislation. The conclusion is devoted towards proposals for addressing any identified deficiencies.