Trachoma is a major public health concern throughout Ethiopia and other parts of the developing world. Control efforts have largely focused on the antibiotic treatment (A) and surgery (S) components of the World Health Organizations (WHO) SAFE strategy. Although S and A efforts have had a positive impact, this approach may not be sustainable. Consequently, this study focuses on the latter two primary prevention components; facial cleanliness (F) and environmental improvement (E). A geographical approach is employed to gain a better understanding of how culture, economics, environment and behaviour are interacting to determine disease risk in the Kembata Zone of Southern Ethiopia. Specifically, mixed methods were used to investigate what social and environmental factors are influencing the distribution of active trachoma amongst children (aged one to nine) in the Kedida Gamela and Damboya Woredas of the Kembata Zone. The research was completed in collaboration with ORBIS Ethiopia – an NGO providing ophthalmology services - and is a follow up to a baseline trachoma survey conducted in the region. ORBIS Ethiopia provided data on the household trachoma prevalence and the knowledge, aptitude and practices (KAP) of household heads. These data sets were linked in ArcGIS to the geographic coordinates for each household surveyed. Mixed effects logistic regression was used to investigate the strength of a set of fourteen predictor variables in 1) determining whether or not a child a had active trachoma (TF or TI) and 2) determining the level of active trachoma (TF or TI) a child had, given that they had active disease. Younger age, an unclean face and low household expenses were found to be significant risk factors for active trachoma (p < 0.05). Older age and an unclean face were found to be significant risk factors (p < 0.05) for TI, the more severe form, in children with trachoma. Next, the Kulldorff spatial scan statistic was used to identify and map clusters of each risk factor as well as clusters of active disease. The results identified areas of overrepresentation of cases (i.e. active disease, unclean faces, low monthly expenses and low latrine ownership) where the need for intervention is particularly high. Qualitative data from in-depth interviews and focus groups with household heads, teachers and health care professionals were used to identify factors that were encouraging or impeding facial cleanliness and environmental improvement efforts to reduce the spread of trachoma. Lack of food, water and money were identified as important concerns amongst household heads. Based on the interviews with teachers, the study recommends that hygiene education be supported by appropriate access to water in schools. The results of the qualitative and quantitative analyses converged and support continued implementation of the facial cleanliness (F) and environmental improvement (E) components of the WHO’s SAFE strategy.

Smart metering residential demand management programs, such as consumption feedback, variable pricing regimes and the remote control of appliances, are being used to respond to the resource management problems of peak electricity demand, climate change and water shortages. Like other demand management programs, these strategies fail to account for (and respond to) the reasons why people consume resources in their homes, namely to carry out everyday practices such as bathing, laundering, heating and cooling. In particular, comfort and cleanliness practices together constitute most of Australia's potable water consumption in urban centres, and represent most of household energy consumption. In addition, new household cooling practices involving air-conditioning appliances are the major contributor to the nation's rising peak electricity demand, which overloads the electricity system on hot days, costing consumers millions of dollars each year. The oversight of comf ort and cleanliness practices in smart metering demand management programs is concerning because these practices are continuing to shift and change, often in more resource-consuming directions, potentially negating the resource savings achieved through demand management programs. This thesis aims to bridge the problematic divide between the policies and strategies of demand managers, and the day-to-day practices which constitute everyday life. Using the empirical 'hook' of smart metering demand management programs and the everyday practices of comfort and cleanliness, this thesis develops a practice-based conceptual framework to study, understand and analyse these practices and the ways in which smart metering demand management programs reconfigure or further entrench them. A series of qualitative methods were employed in studying 65 households across four research groups, focusing specifically on the household practices of heating, cooling, bathing, laundering, toilet flushing and house cleaning. In addition, 27 interviews were conducted with smart metering industry stakeholders involved or implicated in delivering demand management strategies. Together, these lines of inquiry are used to analyse householders' existing and changing comfort and cleanliness practices, the role of several smart metering demand management strategies in reconfiguring these practices, and potential avenues and opportunities for further practice change in less resource-intensive directions. In particular, this thesis highlights the inherent contradictions and problems in accounting for everyday practices within the dominant demand management paradigm, and offers an alternative paradigm termed the co-management of everyday practices. The thesis concludes by briefly identifying the ways in which smart metering could potentially constrain or catalyse a transition towards this new paradigm.

Thesis (M.A.)--Indiana University, 2009. / Title from screen (viewed on August 28, 2009). Department of History, Indiana University-Purdue University Indianapolis (IUPUI). Advisor(s): Marianne Wokeck. Includes vita. Includes bibliographical references (leaves 93-99).

The main goal of this thesis is an introducing and guiding the reader with all important aspects of a proposal of ventilation system for cytostatics laboratory, from theoretical knowledge about the issue via familiarization with an appropriate legislative statute, a demonstration of relevant calculations needed for the project, a proposal in the form of technical reports as well. In this thesis the process of validation, which is needed for installed technology in the cleanroom, is also described. The thesis is supported by drawing documentation of real ventilation project for cytostatics laboratory, which follows the aforementioned technical report and calculations.

Examensarbetet utfördes på Volvo Construction Equipments anläggning i Hallsberg. Projektet utgick på att studera materialhanteringen i tankmonteringen. VCE monterar idag cirka 50 hydraul- och bränsletankar om dagen och har uppemot 20 olika typer av tankar för Volvos hjullastare och ramstyrda dumprar. Tankarna monteras i ett rum med renhetsklassning vilket utgör svårigheter i hur bland annat material får hanteras och förvaras i rummet. Idag förvaras materialet för dessa tankar i monteringslokalen i de fyra monteringsstationerna. Monteringsstationerna har begränsat med plats för material och behöver återfyllas ifrån mellanlagret utanför lokalen. Kundavvikelser på grund av fel monterade tankar är ett problem och kan ha koppling till materialet. I Volvo CE:s ständiga utvecklingsarbete med effektivitet och kvalitetssäkring i fokus ifrågasätts dagens läge inom materialhantering och kvalitetssäkring. Volvo CE misstänker att läget idag inte är optimalt och önskar en utredning på hur materialhanteringen kan effektiviseras för framtida produkter med hänsyn till renhetssklassningen samt hur monteringsfel kan minimeras med eventuella hjälpmedel.  Efter observationer samt samtal med montörer och ansvariga kunde en nulägesbeskrivning skapas i syfte få en överblick över problemområdet och inhämta kunskap om projektets avgränsningar. Utifrån observationer och intervjuer ur ett Lean-perspektiv samt med Lean-verktyg utformades en nulägesanalys. Slöserier identifierades med 7+1 metoden, tankmonteringen visade brister i 5S arbetet. Rotorsaksanalyser på 7+1 slöserierna och bristerna i 5S utfördes och förbättringsmöjligheter visades.  Kittning som med i materialförsörjningen presenterades som förbättringsförslag där materialhanteringen skulle minimeras för montörerna vilket skulle leda till ökat fokus och ökad kvalitet på monteringen. Kittning eliminerar även behovet till att förvara material i monteringslokalen. VCE rekommenderas att i det fortsatta arbetet studera följande: •    Hur kittning kan implementeras på olika nivåer i tankmonteringen•    Poka Yoke. Hur risken för felplock eller felmontering kan minimeras med hjälp om konstruktioner eller färgkodningar•    Digitalisering av monteringslokalen. Datorer vid varje bås med ständigt uppdaterade monteringsrutiner kan minimera risken för fel. / This thesis was carried out at Volvo Construction Equipment's facility in Hallsberg. The project was based on studying material handling in the tank assembly. VCE currently assembles about 50 hydraulic and fuel tanks a day and has up to 20 different types of tanks for Volvo wheel loaders and dump trucks. The tanks are mounted in a room with purity rating which poses difficulties in how materials may be handled and stored in the room, among other things. Today, the material is stored for these tanks in the assembly room of the four assembly stations. The assembly stations have limited space for materials and need to be refilled from the supermarket outside the premises. Customer returns due to faulty assembled tanks are a problem and may be related to the material handling. Volvo CE's continuous development work with efficiency and quality assurance in focus calls into question the current situation in material management and quality assurance. Volvo CE suspects that the situation today is not optimal and asks for an investigation into how material handling can be made more efficient for future products considering the cleanliness-controlled environment and how assembly errors can be minimized with any aids. After observations as well as conversations with fitters and managers, a present-mode description could be created in order to get an overview of the problem area and gain knowledge of the project's boundaries. Based on observations and interviews from a Lean perspective and lean tools, a current situation analysis was designed. Wastes were identified using the 7+1 method, the tank assembly showed shortcomings in the 5S work. Root cause analyses of 7+1 waste and the shortcomings of 5S were carried out and opportunities for improvement were demonstrated. . Kitting presented as an improvement proposal in which material handling would be minimized for fitters, which would lead to increased focus and increased quality of assembly. Kitting also eliminates the need to store materials in the assembly room. VCE is recommended to study the following: •    How Kitting can be implemented at different levels in the tank assembly•    Poka Yoke. How the risk of error picking or faulty assemblies can be minimized by using new designs or color codings.•    Digitization of the assembly room. Computers at each booth with constantly updated assembly routines can minimize the risk of errors.

No description available.

I fordonsindustrin är kemisk renlighet ett grundläggande kriterium för att säkerställa kvaliteten och hållbarheten hos den slutliga produkten. Kemisk renlighet kan defineras som den maximala nivån av kemiska föroreningar (t.ex. olja, fett, ytaktiva ämnen, kemikalier, etc.) som är tillåten på ytan av en produkt, men som tillåter produkten att fortfarande fungera som normalt. En ren yta fri från kemiska föreningar kommer således att säkerställa en robust binding mellan olika substrat. Syftet med den här rapporten är att undersöka och fastställa en kvantiativ method för att utvärdera kemisk renlighet för Formed in Place Gaskets (FIGP). De instrument som kommer att användas för att analysera nivån av kemisk kontaminering (rengöringsmedel) är: F-Scanner, SITA CleanoSpector och Krüss MSA One-Click SFE Mobile Analyzer. För att anvgöra hur nivån av kontaminering (rengöringsmedel) påverkar silikonens tätningsförmåga kommer dolly pull-off adhesionsprov och dragprov att användas. Resultatet visar att F-Scanner och SITA CleanoSpector kan skilja mellan olika nivåer av kontaminering (rengöringsmedel). Dock kan det från dolly pull-off adhesionsprov och dragprov inte dras någon slutsats om att en högre koncentration av kontaminering (rengöringsmedel) leder till en lägre adhesionsstyrka. / In the automotive industry chemical cleanliness is a fundamental criterion for ensuring the quality and durability of the final product. Chemical cleanliness can be defined as the maximum level of chemical contaminants (e.g. oil, grease, surfactants, chemical residues, etc.) permitted on the surface of a part, that still allows the part to function as normal. Hence, a clean surface that is free of chemical contaminants will ensure a robust adhesive bond between different substrates. The following thesis aims to investigate and establish a quantitative method to evaluate chemical cleanliness applicable to Formed in Place Gaskets (FIGP). Different instruments: F-Scanner, SITA CleanoSpector, and Krüss MSA One-Click SFE Mobile Analyzer, for surface analysis will be investigated and used to determine the level of chemical contamination (detergent) on the surface. To determine how the level of contamination (detergent) affects the adhesion properties of sealant, the dolly pull-off adhesion test and tensile test will be used. The results show that the F-Scanner and SITA CleanoSpector can distinguish between different levels of contamination (detergent). However, from the dolly pull-off adhesion test and tensile test, it cannot be concluded that a higher concentration of contamination (detergent) leads to a decrease in the adhesion strength of the sealant.

I fordonsindustrin är kemisk renlighet ett grundläggande kriterium för att säkerställa kvaliteten och hållbarheten hos den slutliga produkten. Kemisk renlighet kan defineras som den maximala nivån av kemiska föroreningar (t.ex. olja, fett, ytaktiva ämnen, kemikalier, etc.) som är tillåten på ytan av en produkt, men som tillåter produkten att fortfarande fungera som normalt. En ren yta fri från kemiska föreningar kommer således att säkerställa en robust binding mellan olika substrat. Syftet med den här rapporten är att undersöka och fastställa en kvantiativ method för att utvärdera kemisk renlighet för Formed in Place Gaskets (FIGP). De instrument som kommer att användas för att analysera nivån av kemisk kontaminering (rengöringsmedel) är: F-Scanner, SITA CleanoSpector och Krüss MSA One-Click SFE Mobile Analyzer. För att anvgöra hur nivån av kontaminering (rengöringsmedel) påverkar silikonens tätningsförmåga kommer dolly pull-off adhesionsprov och dragprov att användas. Resultatet visar att F-Scanner och SITA CleanoSpector kan skilja mellan olika nivåer av kontaminering (rengöringsmedel). Dock kan det från dolly pull-off adhesionsprov och dragprov inte dras någon slutsats om att en högre koncentration av kontaminering (rengöringsmedel) leder till en lägreadhesionsstyrka. / In the automotive industry chemical cleanliness is a fundamental criterion for ensuring the quality and durability of the final product. Chemical cleanliness can be defined as the maximum level of chemical contaminants (e.g. oil, grease, surfactants, chemical residues, etc.) permitted on the surface of a part, that still allows the part to function as normal. Hence, a clean surface that is free of chemical contaminants will ensure a robust adhesive bond between different substrates. The following thesis aims to investigate and establish a quantitative method to evaluate chemical cleanliness applicable to Formed in Place Gaskets (FIGP). Different instruments: F-Scanner, SITA CleanoSpector, and Krüss MSA One- Click SFE Mobile Analyzer, for surface analysis will be investigated and used to determine the level of chemical contamination (detergent) on the surface. To determine how the level of contamination (detergent) affects the adhesion properties of sealant, the dolly pull-off adhesion test and tensile test will be used. The results show that the F-Scanner and SITA CleanoSpector can distinguish between different levels of contamination (detergent). However, from the dolly pull-off adhesion test and tensile test, it cannot be concluded that a higher concentration of contamination (detergent) leads to a decrease in the adhesion strength of the sealant.

Inom medicin och kärnkraft ställs höga krav på olika komponenters renhetsgrad. Vid tillverkning av precisionskomponenter inom medicin och kärnkraftsteknik så används skärvätska för att kyla och smörja godset. Skärvätskan behöver tvättas bort innan komponenterna skickas till kunderna. För att kunna tvätta bort skärvätskan används en speciell tvättutrustning. Idag saknas en metod för att kunna påvisa att den speciella tvättutrustningen på ett tillförlitligt sätt uppnår gällande krav och standarder på renhet som ställs av branscherna, på komponenterna. Genom att verifiera tvättutrustningen mot en specifik kravbild, godkänns tvättutrustningens duglighet och således frisläpps utrustningen för produktion. Målet med studien är att ta fram ett underlag för att kunna verifiera en speciell tvättutrustning. Målet uppnås genom att undersöka vilka faktorer som påverkar renhetsgraden i tvättprocessen och utveckla metoder för att säkerställa att dessa faktorer beaktas. Några av metoderna som används i arbetet är Plan-Do-Study-Act (PDSA), Acceptanskontroll enligt attributsmetoden, intervju och observation. Resultatet av provgruppsmätningarna från laboratoriet, visar att komponenternas renhetsgrad ligger inom Willos kravställning på restkontamination av olja≤10 μg/cm^2 då komponenterna tvättats med tvättprogram två. Efter att provgupperna genomgått acceptanskontrollen står det klart att provgrupperna accepteras med en sannolikhet på 95,6% och att tvättprocessen är stabil. I studien har gamla och antagna mätvärdena använts eftersom det tar lång tid att ta laboratorieprover och tiden som examensarbetet pågår är begränsad. Med de gamla och antagna mätvärdena skulle den speciella tvättutrustningen kunna verifieras mot Willos kravställning, för att möta branschernas krav på renhetsgrad. Genom verifieringen kan man på så vis påvisa att tvättutrustningen levererar stabilt tvättresultat över tid. / In medical and nuclear power applications, high demands are placed on the level of cleanliness of various components. When precision components in medicine and nuclear power technology are manufactured, cutting fluid is used to cool and lubricate the raw stock. The cutting fluid needs to be washed away before the components are sent to customers. To be able to wash away the cutting fluid, special washing equipment is used. Today, there is no method to demonstrate that the special washing equipment reliably meets current requirements and standards for cleanliness set by the industries on the components. By verifying the washing equipment against specific requirements, the capability of the washing equipment is approved, and thus, the equipment is released for production. The study aims to produce a basis for verifying special washing equipment. The goal is achieved by examining which factors affect the level of cleanliness in the washing process and developing methods to ensure that these factors are taken into account. Some of the methods used in work are Plan-Do-Study-Act (PDSA), Acceptance sampling according to the attribute method, interview and observation. The results of the test group measurements from the laboratory show that the level of cleanliness on the components is within Willo's requirements for residual contamination of oil≤10 μg/cm^2 when the components have been washed with washing program two. After the sample groups have undergone the acceptance sampling, it is clear that the sample groups are accepted with a probability of 95.6% and that the washing process is stable. In the study, old and assumed measurement values have been used because of the time it takes to perform laboratory samples, and the time that the degree project progresses is limited. With the old and assumed measurement values, the special washing equipment could be verified to Willo's requirements in order to meet the industries' requirements for the level of cleanliness. Through the verification, it can be demonstrated that the washing equipment delivers stable washing results over time.

La propreté inclusionnaire reste un enjeu majeur en élaboration des métaux par voie liquide. La flottation, principal procédé retenu en métallurgie secondaire pour éliminer les particules d’inclusions, consiste à injecter des bulles de gaz au sein du réacteur. Lors de leur ascension, les bulles vont capter les plus grosses inclusions et favoriser la collision et l’agrégation des particules. Dans le but de quantifier les phénomènes influents à l’échelle des inclusions sur la dynamique d’agrégation entre deux inclusions à proximité des bulles, un modèle numérique 3D a été développé. L’écoulement local est modélisé par un cisaillement plan permanent et résolu par une méthode de Boltzmann sur réseau. Le couplage entre les particules et le fluide a été assuré par une méthode de frontière immergée permettant de calculer la perturbation hydrodynamique engendrée par la présence des particules et de mettre à jour les interactions entre particules pour leur suivi lagrangien. Les simulations numériques réalisées ont mis en évidence que les effets hydrodynamiques ont une influence non négligeable sur le comportement des inclusions. Des sections efficaces de collision ont pu être extraites, à partir desquelles ont été calculés des noyaux d’agrégation, données macroscopiques rendant compte des effets à petite échelle. Une première application de ce travail a été menée avec le calcul des fréquences d’agrégation d’un train de bulle dans un réacteur canal à partir de résultats de simulations DNS. Les noyaux d’agrégation ont également été exploités en vue de déterminer, à partir de résultats RANS de l’hydrodynamique d’une poche d’acier, l’évolution de la concentration d’inclusions par un bilan de population global. / Inclusion cleanliness remains a major challenge faced in process metallurgy in liquid phase. Flotation, the main process used in secondary metallurgy to remove inclusions, consists in injecting gas bubbles into the reactor. Rising gas bubbles entrap the biggest inclusions at their surface or in their wake. Besides, they promote collision and aggregation among particles. A 3D numerical model has been developed in order to quantify the roles of the prevailing phenomena on aggregation dynamics between inclusions in the vicinity of bubbles. At inclusion (mesoscopic) scale, the turbulent flow is locally modeled by a steady plane shear flow which is solved using a lattice-Boltzmann method. The coupling between both liquid and solid phases is ensured using an immersed boundary method. This method resolves the hydrodynamic perturbation induced by particles, and hence their interactions that are, in turn, used to update their Lagrangian tracking. The conducted numerical simulations bring out the influence of hydrodynamic effects on inclusion behavior. Collision cross sections have been determined from which ensuing aggregation kernels have been calculated. Such cross sections could provide macroscopic models to represent local particle dynamics. A first application of these results is presented to calculate aggregation frequencies in bubble swarms in a channel flow reactor that was simulated using DNS. Additionally, evolution of inclusion populations in molten steel has been determined from RANS simulation of a liquid steel ladle by means of a global population balance implementing the aggregation kernels determined in the present work.