Global ETD Search

21	Návrh a optimalizace tlumiče teplotních fluktuací využívající latentní teplo fázové přeměny / Design and optimization of temperature fluctuation dumper with latent heat thermal energy storage Kozubík, Lukáš January 2018 (has links) The goal of this master’s thesis is creating a model of the attenuation of the fluid temperature fluctuations using methods described in the thesis. PCM is used to attenuation of fluctuations. This thesis is example of utilization PCM in technical practice. Numerical calculation of PCM phase change uses the method of effective heat capacity and enthalpy method. A part of this thesis also forms a theoretical basis for heat transfer described by differential equations. The final part of the thesis is dedicated to the optimization of the model and the description of the optimization methods.
22	Sun-Synchronous Orbit Slot Architecture Analysis and Development Watson, Eric 01 May 2012 (has links) Space debris growth and an influx in space traffic will create a need for increased space traffic management. Due to orbital population density and likely future growth, the implementation of a slot architecture to Sun-synchronous orbit is considered in order to mitigate conjunctions among active satellites. This paper furthers work done in Sun-synchronous orbit slot architecture design and focuses on two main aspects. First, an in-depth relative motion analysis of satellites with respect to their assigned slots is presented. Then, a method for developing a slot architecture from a specific set of user defined inputs is derived. Space Traffic Management Constellation Astrodynamics Orbital Debris Mitigation Control Volume Design Astrodynamics Space Vehicles
23	Energetický audit vodovodů / Energy audit of water supply Pavliš, Jan January 2014 (has links) This document aims on presentation of energy audit of water networks. Its focus is to introduce the method of solving the energy audit of water networks. It characterizes the water networks performance using context and efficiency indicators. It consists of theoretical description of mathematical approach to the problem. It describes different kinds of energies participating in water distribution process and also presents energy indicators which describe energetic efficiency of water networks. Last but not least it shows the possibilities of accomplishment the energy audit of water network on numerical example. Then we can find the assessment of each of indicators and kinds of energies. Context indicators describe topography of water network and efficiency indicators show how efficient in terms of using input energy is the behavior of the water networks. The case application of the approach of solving energy audit of water networks as well as indicators assessment can be found in the last part of the thesis. This thesis brings basic overview of the approach to the solution of energy audit of water networks. May it help the future application of the energy audit of water networks in the Czech Republic.
24	Mathematical Modelling of the Role of Haptotaxis in Tumour Growth and Invasion Mallet, Daniel Gordon January 2004 (has links) In this thesis, a number of mathematical models of haptotactic cell migration are developed. The modelling of haptotaxis is presented in two distinct parts - the ﬁrst comprises an investigation of haptotaxis in pre-necrotic avascular tumours, while the second consists of the modelling of adhesion-mediated haptotactic cell migration within tissue, with particular attention paid to the biological appropriateness of the description of cell-extracellular matrix adhesion. A model is developed that describes the eﬀects of passive and haptotactic migration on the cellular dynamics and growth of pre-necrotic avascular tumours. The model includes a description of the extracellular matrix and its eﬀect on cell migration. Questions are posed as to which cell types act as a source of the extracellular matrix, and the model is used to simulate the possible eﬀects of diﬀerent matrix sources. Simulations in one-dimensional and spherically symmetric geometry are presented, displaying familiar results such as three-phase tumour growth and tumours comprising a rim of proliferating cells surrounding a non-proliferating region. Novel eﬀects are also described such as cell population splitting and tumour shrinkage due to haptotaxis and appropriate extracellular matrix construction. The avascular tumour model is then extended to describe the internalisation of labelled cells and inert microspheres within multicell tumour spheroids. A novel model of adhesion-receptor mediated haptotactic cell migration is presented and speciﬁc applications of the model to tumour invasion processes are discussed. This model includes a more biologically realistic description of cell adhesion than has been considered in previous models of cell population haptotaxis. Through assumptions of fast kinetics, the model is simpliﬁed with the identiﬁcation of relationships between the simpliﬁed model and previous models of haptotaxis. Further simpli.cations to the model are made and travelling wave solutions of the original model are then investigated. It is noted that the generic numerical solution routine NAG D03PCF is not always appropriate for the solution of the model, and can produce oscillatory and inaccurate solutions. For this reason, a control volume numerical solver with .ux limiting is developed to provide a better method of solving the cell migration models. Adhesion Receptors Anoikis Cancer Cell Migration Chemotaxis Control Volume Method Extracellular Matrix ﬂux Limiting Haptotactic Boundary Layer Haptotaxis Integrin Blocking Integrins Internalisation Invasion Lamellipod Landau Transformation Ligand Metastasis Multicell Spheroid Newtons Method Phase Plane Protease Taxis Travelling Wave Tumor Tumour Wall Of Singularities
25	Mathematical modelling of primary alkaline batteries Johansen, Jonathan Frederick January 2007 (has links) Three mathematical models, two of primary alkaline battery cathode discharge, and one of primary alkaline battery discharge, are developed, presented, solved and investigated in this thesis. The primary aim of this work is to improve our understanding of the complex, interrelated and nonlinear processes that occur within primary alkaline batteries during discharge. We use perturbation techniques and Laplace transforms to analyse and simplify an existing model of primary alkaline battery cathode under galvanostatic discharge. The process highlights key phenomena, and removes those phenomena that have very little effect on discharge from the model. We find that electrolyte variation within Electrolytic Manganese Dioxide (EMD) particles is negligible, but proton diffusion within EMD crystals is important. The simplification process results in a significant reduction in the number of model equations, and greatly decreases the computational overhead of the numerical simulation software. In addition, the model results based on this simplified framework compare well with available experimental data. The second model of the primary alkaline battery cathode discharge simulates step potential electrochemical spectroscopy discharges, and is used to improve our understanding of the multi-reaction nature of the reduction of EMD. We find that a single-reaction framework is able to simulate multi-reaction behaviour through the use of a nonlinear ion-ion interaction term. The third model simulates the full primary alkaline battery system, and accounts for the precipitation of zinc oxide within the separator (and other regions), and subsequent internal short circuit through this phase. It was found that an internal short circuit is created at the beginning of discharge, and this self-discharge may be exacerbated by discharging the cell intermittently. We find that using a thicker separator paper is a very effective way of minimising self-discharge behaviour. The equations describing the three models are solved numerically in MATLABR, using three pieces of numerical simulation software. They provide a flexible and powerful set of primary alkaline battery discharge prediction tools, that leverage the simplified model framework, allowing them to be easily run on a desktop PC. advection anode asymptotic analysis BET surface area binary electrolyte boundary condition Butler-Volmer equation cathode closed circuit voltage concentration polarisation control volume current path discretisation diffusion electrochemical reaction electrode electrolytic manganese dioxide EMD crystals EMD particles exchange current density geometric surface area initial condition linearisation macrohomogeneous porous electrode theory mathematical model Nernst equation ohmic losses open circuit voltage ordinary differential equation overpotential partial differential equation perturbation techniques potassium hydroxide potassium zincate precipitation reaction primary battery separator paper simulation ternary electrolyte theoretical capacity utilisation zinc zinc oxide
26	Analysis of a novel thermoelectric generator in the built environment Lozano, Adolfo 05 October 2011 (has links) This study centered on a novel thermoelectric generator (TEG) integrated into the built environment. Designed by Watts Thermoelectric LLC, the TEG is essentially a novel assembly of thermoelectric modules whose required temperature differential is supplied by hot and cold streams of water flowing through the TEG. Per its recommended operating conditions, the TEG nominally generates 83 Watts of electrical power. In its default configuration in the built environment, solar-thermal energy serves as the TEG’s hot stream source and geothermal energy serves as its cold stream source. Two systems-level, thermodynamic analyses were performed, which were based on the TEG’s upcoming characterization testing, scheduled to occur later in 2011 in Detroit, Michigan. The first analysis considered the TEG coupled with a solar collector system. A numerical model of the coupled system was constructed in order to estimate the system’s annual energetic performance. It was determined numerically that over the course of a sample year, the solar collector system could deliver 39.73 megawatt-hours (MWh) of thermal energy to the TEG. The TEG converted that thermal energy into a net of 266.5 kilowatt-hours of electricity in that year. The second analysis focused on the TEG itself during operation with the purpose of providing a preliminary thermodynamic characterization of the TEG. Using experimental data, this analysis found the TEG’s operating efficiency to be 1.72%. Next, the annual emissions that would be avoided by implementing the zero-emission TEG were considered. The emission factor of Michigan’s electric grid, RFCM, was calculated to be 0.830 tons of carbon dioxide-equivalent (CO2e) per MWh, and with the TEG’s annual energy output, it was concluded that 0.221 tons CO2e would be avoided each year with the TEG. It is important to note that the TEG can be linearly scaled up by including additional modules. Thus, these benefits can be multiplied through the incorporation of more TEG units. Finally, the levelized cost of electricity (LCOE) of the TEG integrated into the built environment with the solar-thermal hot source and passive ground-based cold source was considered. The LCOE of the system was estimated to be approximately $8,404/MWh, which is substantially greater than current generation technologies. Note that this calculation was based on one particular configuration with a particular and narrow set of assumptions, and is not intended to be a general conclusion about TEG systems overall. It was concluded that while solar-thermal energy systems can sustain the TEG, they are capital-intensive and therefore not economically suitable for the TEG given the assumptions of this analysis. In the end, because of the large costs associated with the solar-thermal system, waste heat recovery is proposed as a potentially more cost-effective provider of the TEG’s hot stream source. / text Thermoelectric generator TEG Novel thermoelectric generator Thermoelectrics Thermoelectric effect Thermoelectric modules Thermoelectric device Patent application Hot stream source Cold stream source EIA EERE Systems-level analysis Energy balance Control volume analysis Thermodynamic analysis Insolation data Insolation incident on a panel Incident insolation Extraterrestrial insolation NREL Ambient temperature data NOAA Renewable energy sources Energy generation technology Electricity generation technology Thermal energy Coupled system Emissions Greenhouse gas GHG Emissions analysis Zero-emission Emissions avoided Emission factor EF Reliability First Corporation RFC Built environment Integrated into the built environment Solar-thermal energy Solar collector system Photovoltaic thermal PVT panel Thermal storage tank Geothermal energy Geothermal heat pump GHP Ground source heat pump GSHP Numerical analysis Numerical model MATLAB Finite-difference Euler explicit Electric grid Annual energetic performance Annual electricity generation Operating efficiency System efficiency Thermodynamic characterization Economic analysis Levelized cost of energy LCOE Waste heat recovery Carbon dioxide equivalent CO2e Capital costs Installed costs Operating and maintenance costs

Page generated in 0.0644 seconds