Spelling suggestions: "subject:"fileformats"" "subject:"fileformat""
1 |
A NEW GENERATION OF RECORDING TECHNOLOGY THE SOLID STATE RECORDERJensen, Peter, Thacker, Christopher 10 1900 (has links)
International Telemetering Conference Proceedings / October 26-29, 1998 / Town & Country Resort Hotel and Convention Center, San Diego, California / The Test & Evaluation community is starting to migrate toward solid state recording. This
paper outlines some of the important areas that are new to solid state recording as well as
examining some of the issues involved in moving to a direct recording methodology.
Some of the parameters used to choose a solid state memory architecture are included. A
matrix to compare various methods of data recording, such as solid state and magnetic
tape recording, will be discussed. These various methods will be evaluated using the
following parameters: Ruggedness (Shock, Vibration, Temperature), Capacity, and
Reliability (Error Correction). A short discussion of data formats with an emphasis on
efficiency and usability is included.
|
2 |
A comparison of 3D file formatsLundgren, Marcus January 2011 (has links)
Choosing a 3D file format is a difficult task, as there exists a countless number of formats with different ways of storing the data. The format may be binary or clear text using XML, supporting a lot of features or just the ones that is currently required and there may be an official, or just an unofficial, specification available. This thesis compares four different 3D file formats by how they handle specific features; meshes, animation and materials. The file formats were chosen based on if they could be exported by the 3D computer graphics software Blender, if they supported the required features and if they appeared to have some form of complete specification. The formats were then evaluated by looking at the available specification and, if time permitted, creating a parser. The chosen formats were COLLADA, B3D, MD2 and X. The comparison was then conducted, comparing how they handled meshes, animation, materials, specification and file size. This was followed by a more general discussion about the formats.
|
3 |
What do all the numbers mean? Making sure that we have all the pieces of the puzzle.Sparrow, Thomas, Gaffney, Christopher F., Schmidt, Armin R. January 2009 (has links)
No / No Abstract
|
4 |
A comparison study of the implementation of digital camera's RAW and JPEG and scanner's TIFF file formats, and color management procedures for inkjet textile printing applications /Chien, Chi-Hao. January 2009 (has links)
Thesis (M.F.A.)--Rochester Institute of Technology, 2009. / Typescript. Includes bibliographical references (leaves 58-61).
|
5 |
Rescuing the legacy project: a case study in digital preservation and technical obsolescenceMickens, Leah M. 08 April 2009 (has links)
The ability to maintain continuous access to digital documents and artifacts is one
of the most significant problems facing the archival, manuscript repository, and record
management communities in the twenty-first century. This problem with access is
particularly troublesome in the case of complex digital installments, which resist simple
migration and emulation strategies. The Legacy Project, which was produced by the
William Breman Jewish Heritage Museum in Atlanta, was created in the early 2000s as a
means of telling the stories of Holocaust survivors who settled in metropolitan Atlanta.
Legacy was an interactive multimedia kiosk that enabled museum visitors to read
accounts, watch digital video, and examine photographs about these survivors. However,
several years after Legacy was completed, it became inoperable, due to technological
obsolescence. By using Legacy as a case study, I examine how institutions can preserve
access to complex digital artifacts and how they can rescue digital information that is in
danger of being lost.
|
6 |
Underlagshantering i projekteringsprocessen : En studie om datasamordning från underlag till BIM-modell / Supporting documents in the design-process : A study concerning data coordination from supporting document to BIM-modelHärdstedt, Linus, Snäll, Joel January 2020 (has links)
Purpose: The purpose of this paper is to examine how material, vital for the designprocess (supporting documents) is handled throughout the entire process. From obtaining the material from the document-administer until the material is transformed and applicable in a BIM-software in the design-process. Method: The first method is a case study that contains semi-structured interviews with one large as well as one small design-firm in Sweden, but also the biggest client regarding infrastructure in Sweden. Secondly, the other part of this thesis work is to perform an experiment containing two parts where the first one is to examine supporting material of an ongoing infrastructure-project and evaluate the quality, as well as constructing conversion rules to evaluate how supporting documents can be implemented. Findings: All the respondents in the conducted survey reported that supporting material regarding electric-, telecommunication- and fibre-optic cables were supporting material with the lowest degree of accuracy. Furthermore, the most used file-format is DWG, but file-formats like PDF, JPG, XML and LAS are also file-formats that is used according to the respondents. All the respondents suggest that a standardised way of using supporting documents would be an efficient way of standardising the process. The findings from the experiment concluded that the most used file-format used as supporting material is DWG (79%), followed by PDF (21 %). The quality varied between different providers. Supporting material provided straight from the contractor in DWG had great or excellent quality. Material as PDF/JPG needed to be processed in order to be used in a BIM-software. The implementing of conversion rules resulted in way of implementing these. In order to use this, the supporting document needs to be digital, in this case as DWG-files. Well established ways of using colours, layers and names in the CAD-software is vital. Implications: In order to make the way of handling the supporting material more efficient, a standardised way of handling these need to be used, as well as standardised file-formats. By making the supporting material digital, this will make the material more accessible, thus is the quality of e.g. PDF and JPG “not sufficient” because a BIMuser must convert these files manually, which provide one source of error. Therefore, these files lack interoperability. Regarding the material provided by the contractor, the design-firm need to have direct communication with the provider of the supporting material to take advantage of DWG-files and use the same file-formats, layers etc., to reduce the time it takes to convert the supporting documents manually. Limitations: A limitation is that only one large and one small design-firm is analysed. One part of a complete BIM-software is used, so the external validity is low, because the result may only be used in another small design-firm with the same project configurations and programmes. The experiment, where Conversion Rules were examined did only embrace wells (water-systems). / Syfte: Syftet med detta examensarbete är att ta reda på hur underlagshanteringen ser ut igenom hela processen från tillhandahållning av underlaget till implementering i projekteringsprocessen. Metod: Den första är en fallstudie som består av kvalitativa semi-strukturerade intervjuer med en stor och en liten konsultfirma inom projekteringsprocessen, såväl som den största beställaren av infrastrukturprojekt i Sverige. Den andra delen är ett experiment som är uppdelat i två delar där den första är att ta reda på hur underlag ser ut och bedöma dessa i ett pågående infrastrukturprojekt. Den andra delen är att upprätta så kallade konverteringsregler för att importera underlag i en BIM-mjukvara. Resultat: Samtliga respondenter i intervjuerna svarade att underlag gällande el-, teleoch fiberoptikkablar är underlag med lägst grad av träffsäkerhet/noggrannhet. Vidare svarade respondenterna att DWG är filformatet som oftast används. Andra filformat som PDF, JPG, XML och LAS är även det filformat som används. Samtliga respondenter redogjorde även för vissa åtgärder som kan vidtas för att standardisera underlagshantering i branschen. Däribland efterfrågas en standardisering av underlagshantering gällande lagernamn, färger, filformat osv. I experimentet visade det sig att underlag i DWG-format svarar för (79 %) av underlagen, följt av PDF (21 %). Kvaliteten varierade mellan olika källor, där underlag tillhandahållna direkt av entreprenören i DWG hade bra eller utomordentlig kvalitet. Underlag i from av PDF/JPG måste omvandlas för hand för att kunna används i en BIM-mjukvara. Implementeringen av konverteringsregler resulterade i en arbetsgång för att implementera konverteringsregler i projekteringsprocessen. För att göra detta krävs underlag i DWG-format. Konsekvenser: För att göra underlagshanteringsprocessen mer effektiv, behövs ett standardiserat sätt att använda dessa, såväl som filformat. Genom att digitalisera underlag bidrar detta till att höja antagningsgraden i CAD- och BIM-mjukvaror. Således är kvalitén av exempelvis PDF och JPG ”inte tillräckligt” på grund av att en person manuellt måste omvandla dessa filer, som bidrar till en felkälla. Därav är interoperabiliteten bristfällig. Gällande material tillhandahållen av entreprenören, så måste en god kommunikation upprättas mellan de båda parterna för att dra nytta av underlag i DWG, och använda samma filformat, lager etcetera, för att reducera tidsåtgången i att konvertera exempelvis PDF-filer manuellt. Begränsningar: Endast en stor och en lite konsultfirma analyseras. Endast en del av en komplett BIM-mjukvara används, därav låg extern validitet, då resultatet endast kan appliceras i en annan liten konsultfirma med samma projekt-konfigurationer och program. I experimentet där konverteringsregler utreddes inkluderades endast brunnar (VA).
|
7 |
Distribuovaný repositář digitálních forenzních dat / Distributed Forensic Digital Data RepositoryJosefík, Martin January 2018 (has links)
This work deals with the design of distributed repository aimed at storing digital forensic data. The theoretical part of the thesis describes digital forensics and what is its purpose. There are also explained Big data, suitable storages, their properties, advantages and disadvantages, in this part. The main part of the thesis deals with the design and implementation of distributed storage for digital forensic data. The design is also focused in suitable indexing of stored data, and supporting new types of digital forensic data. The performance of implemented system was evaluated for chosen type of digital forensic data PCAP files.
|
8 |
Produkce digitálních obrazových dat a jejich kontrola / Digital Images Production and Quality ControlVychodil, Bedřich January 2013 (has links)
(EN) This dissertation provides a broad understanding of fundamental terminology and an inside view of the digitization workflow and quality control processes. The main foci are on quality assurance during and outside the digitization processes and identification of the most suitable format for access, long term preservation, rendering and reformatting issues. An analysis of selected digitization centers is also included. An application called DIFFER (Determinator of Image File Format propERties) and subsequently The Image Data Validator - DIFFER has been developed using results from previously conducted research. The application utilizes new methods and technologies to help accelerate the whole processing and quality control. The goal was to develop a quality control application for a select group of relevant still image file formats capable of performing identification, characterization, validation and visual/mathematical comparison integrated into an operational digital preservation framework. This application comes with a well-structured graphic user interface, which helps the end user to understand the relationships between various file format properties, detect visual and non visual errors and simplify decision-making. Additional comprehensive annexes, describing the most crucial still image...
|
Page generated in 0.0468 seconds