L’impact négatif de l’automobile sur l’environnement a entraîné une sévérisation des normes législatives pour protéger celui-ci. Les difficultés rencontrées lors de l’amélioration du rendement du moteur à allumage commandé, résultent principalement de son fonctionnement inefficace à charges partielles. La distribution variable est capable d'améliorations concernant la réduction de la consommation de carburant, surtout dans une zone d’utilisation fréquente : basses charges et bas régimes. Une alternative à l’étude expérimentale est l’approche par simulation numérique, CFD en utilisant le logiciel ANSYS-Fluent. Dans cette thèse de doctorat, le but principal a été de déterminer les vitesses d’écoulement du fluide pendant le processus d’admission pour deux lois de levée de la soupape, pour un moteur entraîné à 815 tr/min et une ouverture du papillon de gaz de 21.6°. Dans ce but, on a utilisé deux modèles de simulation numérique: un modèle bidimensionnel et un modèle tridimensionnel. L’étude réalisée par simulation numérique a permis de clarifier quelques aspects importants concernant les vitesses d’écoulement de l’air dans le cylindre et le degré de turbulence. / The negative impact of automobiles on the environment has led to increased severity in the legislation concerning environmental protection. The problems encountered in the efforts intended to improve the efficiency of the spark ignition engine are derived from its inefficient operation under partial loads. The variable intake valve lift is capable of significant changes aiming at lower fuel consumption, especially in the frequent use area: low torque, low speed. An alternative to the experimental study of fluid flow is the approach by numerical simulation, CFD, using the software ANSYS-Fluent. The main purpose of the present doctoral thesis was to determine the fluid flow velocity during the intake, for two intake valve lift laws, when the engine is running at 815 rpm, and with an opening of the throttle plate at 21.6°. To do this, we have used two numerical simulation models: one two-dimensional, and one three-dimensional. The study by numerical simulation made it possible to clarify some important issues regarding the air flow velocity into the cylinder, and the level of turbulence.

INTRODUÇÃO: Nos pacientes pediátricos, em razão das limitações relacionadas ao tamanho dos receptores, são utilizados segmentos do fígado provenientes de \"cadáver\" ou de doador vivo (\"fígado reduzido\"). As complicações decorrentes das anastomoses cirúrgicas podem ser de natureza vascular e biliar, sendo que a maior causa de perda do enxerto deve-se à trombose ou estenose da artéria hepática, veia porta e veias hepáticas. A ultra-sonografia convencional e com Doppler colorido (US-DC) pode ser utilizada para avaliação dessas complicações. Todavia, apesar da alta sensibilidade e especificidade deste método, há poucas descrições a respeito de parâmetros que podem ser utilizados para o estudo das alterações vasculares. OBJETIVO: Estabelecer parâmetros de ultra-sonografia convencional e com Doppler colorido (US-DC) para o diagnóstico de estenose da VP e VH no transplante hepático reduzido em crianças. MÉTODO: Estudo retrospectivo de 134 US-DC realizado em 48 crianças submetidas a transplante hepático segmentar no Instituto da Criança do Hospital das Clinicas da Faculdade de Medicina da Universidade de São Paulo (ICr-HC-FMUSP), entre janeiro de 2002 e julho de 2005. No estudo da VP, os seguintes parâmetros foram analisados: calibre da VP na anastomose; velocidade máxima na anastomose (VP1); velocidade máxima no segmento pré-anastomose (VP2) e relação entre as velocidades máximas na anastomose/préanastomose (VP1/VP2). No estudo da VH, foram analisados: velocidade máxima na anastomose (VH1); velocidade na VH (VH2) e relação entre as velocidades máximas na anastomose/VH (VH1/VH2). Pacientes com estenose confirmada pela angiografia foram incluídos no grupo estenose e pacientes com angiografia ou cirurgia normal ou com boa evolução clínica foram incluídos grupo controle. RESULTADOS: Quatorze US-DC tiveram estenose da VP confirmadas pela portografia. O calibre da VP na anastomose foi menor no grupo estenose do que no grupo controle (média 2,5mm e 6,3mm respectivamente); PV1 e PV1/PV2 foram maiores no grupo estenose do que no grupo controle (média PV1 = 172cm/s, PV1/PV2 = 5,1 / PV1 = 83cm/s, PV1/PV2 = 1,8 respectivamente). O calibre da VP < 3,3mm apresentou a melhor correlação com a portografia (sensibilidade = 93% e especificidade = 88%), seguidos de VP1 > 128cm/s (sensibilidade = 86% e especificidade = 84%) e VP1/VP2 > 2,4 (sensibilidade = 79% e especificidade = 86%). Doze US-DC tiveram estenose da VH confirmada pela angiografia. A VH1 e HV1/VH2 foram maiores no grupo estenose do que no grupo controle (média VH1 = 202.2cm/s, VH1/VH2 = 6,0 / VH1 = 136,8cm/s, VH1/VH2 = 3,0 respectivamente). A relação VH1/VH2 > 4 apresentou a melhor correlação com a angiografia (sensibilidade = 83% e especificidade = 84%) seguido de VH1 > 128cm/s (sensibilidade = 83% e especificidade = 52%). CONCLUSÃO: Calibre da VP < 3,3mm na anastomose e relação das velocidades VH1/VH2 > 4 são altamente sensíveis e específicos no diagnóstico das estenoses da anastomose da VP e VH respectivamente, no póstransplante hepático em crianças / INTRODUCTION: Cadáveric split liver and living donor liver transplantation is mostly performed in children because of a shortage of suitable hepatic allograft in this population. Real time and Doppler ultrasound (CD-US) is the initial imaging modality for detection and follow-up of early and delayed vascular and non-vascular complications after liver transplant, but there are only few studies concerning its value in the diagnosis of venous complications. OBJECTIVE: Determine real time and Doppler ultrasound (CD-US) diagnostic parameters of portal (PV) and hepatic vein (HV) stenoses after segmental liver transplantation in children and assess their sensitivity and specificity. METHOD: Retrospective study of 134 CD-US performed in 48 patients submitted to segmental liver transplantation at Child Institute of University of Sao Paulo Medical School from January 2002 through July 2005. PV parameters: diameter at the anastomosis, velocities at the anastomosis (PV1) and at the pre-anastomosis segments (PV2) and the ratio PV1/PV2. HV parameters: velocities at the HV anastomosis to the inferior vena cava (HV1), at HV (HV2) and the ratio HV1/HV2. Stenosis group: patients with stenosis confirmed by angiography. Control group: patients presenting normal angiography or uneventhfull surgery or good clinical outcome. RESULTS: Fourteen CD-US had PV stenosis confirmed by portography. Diameter of PV at the anastomosis: narrower in the stenosis group (2.5mm) than in the control group (6.3mm) (p<.5). Mean PV1 and PV1/PV2: higher in the stenosis group than in the control group (PV1 = 172 cm/s, PV1/PV2 = 5.1/PV1 = 83cm/s, PV1/PV2 = 1.8). Statistical analysis determined as predictive of PV stenosis: PV diameter < 3.3mm (sensitivity of 93% and specificity of 88.4%); PV1 > 128cm/s (sensitivity of 86% and specificity of 84%) and PV1/PV2 > 2.4 (sensitivity of 79% and specificity of 86%). Twelve CD-US had HV stenosis confirmed by angiography. Mean HV1 and HV1/HV2: higher in the study group (HV1 = 202.2cm/s, HV1/HV2 = 6.0 / HV1 = 136.8cm/s, HV1/HV2 = 3.0) (p<.05). Statistical analysis determined as predictive of HV stenosis: PV1 > 128cm/s (sensitivity of 83% and specificity of 52%) and HV1/HV2 > 4 (sensitivity of 83% and specificity of 84%). CONCLUSION: PV diameter < 3.3mm at the anastomosis and HV1/HV2 > 4.0 are highly predictive for detection of PV and HV stenosis respectively, after pediatric segmental liver transplantation

Introdução: A cirurgia cardíaca resulta em taxa considerável de complicações neurológicas, incluindo delirium, disfunção cognitiva e acidente vascular cerebral isquêmico. Supõe que a fisiopatologia envolva embolia, aterotrombose, hipofluxo, redução do débito cardíaco e alterações da autorregulação cerebral. O balão de contrapulsação intra-aórtico (BIA) é um dispositivo de assistência circulatória comumente utilizado no perioperatório de pacientes de alto risco com o objetivo de otimização do débito cardíaco e da perfusão coronária. Apesar do benefício hemodinâmico do BIA, não é conhecido seu efeito na hemodinâmica encefálica. Objetivo: Avaliar os efeitos do BIA na hemodinâmica encefálica em pacientes de alto risco submetido a cirurgia cardíaca com circulação extracorpórea (CEC). Métodos: Trata-se de um subestudo do estudo clínico prospectivo e randomizado \"Balão de contra-pulsação intra-aórtico eletivo em pacientes de alto risco submetidos a cirurgia cardíaca\", realizado no Instituto do coração do Hospital das Clínicas da Faculdade de Medicina da Universidade de São Paulo entre 2014 e 2016. Dos 181 pacientes incluídos no estudo randomizado, 67 pacientes foram incluídos no subestudo. Os pacientes eram adultos, submetidos a cirurgia cardíaca de revascularização miocárdica (RM) com fração de ejeção menor ou igual a 40% e/ou EuroScore maior ou igual a 6. Os mesmos foram randomizados para uso do BIA logo após a indução anestésica ou para grupo controle. A velocidade de fluxo sanguíneo cerebral (VFSC) pelo ultrassom Doppler transcraniano e a pressão arterial (PA) pelo Finometer foram continuamente gravados por 5 minutos antes da cirurgia (T1), 24h após (T2) e 7 dias após (T3). O índice de autorregulação (ARI) foi estimado através da resposta ao degrau da VFSC a mudanças na PA, derivados da análise da função de transferência. As seguintes complicações clínicas neurológicas foram avaliadas: delirium, disfunção cognitiva e acidente vascular cerebral isquêmico. Resultados: Dos pacientes incluídos no estudo, 34 foram alocados para a estratégia de uso profilático do balão intra-aórtico e 33 para a estratégia controle. Não houve diferenças significativas entre os grupos BIA e controle respectivamente, nos três tempos de avaliação, em relação ao ARI (T1 - 5,5 ± 1,9 vs 5,7 ± 1,7; T2 - 4,0 ± 1,9 vs 4,1 ± 1,6; T3 - 5,7 ± 2,0 vs 5,7 ± 1,6, P= 0,978) e em relação à VFSC (T1 - 57,3 ± 19,4 vs 59,3 ± 11,8; T2 - 74,0 ± 21,6 vs 74,7 ± 17,5; T3 - 71,1 ± 21,3 vs 68,1 ± 15,1; P=0,952). O grupo BIA e o grupo controle apresentaram incidência semelhante de complicações neurológicas (delirium na unidade de terapia intensiva - 26,5% vs 24,2%, P=0,834, acidente vascular cerebral isquêmico - 3,0% vs 2,9%, P=1,00, e declínio cognitivo pós-operatório através das escalas Mini Mental State Examination MMSE - 16,7% vs 40,7%; P= 0,073 e Avaliação Cognitiva Montreal MoCA - 79,16% vs 81,5%; P= 1,000). Conclusões: O uso profilático do BIA em pacientes de alto risco submetidos à cirurgia de revascularização do miocárdio não altera a hemodinâmica encefálica e não está associado ao aumento de complicações neurológicas como delirium, declínio cognitivo e acidente vascular cerebral isquêmico / Introduction: Cardiac surgery is associated with a high incidence of neurologic complications, such as delirium, cognitive decline and stroke. The pathophysiology probably involves embolism, thrombosis, decreased cardiac output and abnormalities in cerebral autoregulation. The intraaortic balloon pump (IABP) is an assist device commonly in high-risk patients undergoing cardiac surgery aiming to increase the cardiac output and to improve the coronary perfusion. However, the effect of the IABP on the cerebral hemodynamic is unknown. Objectives: To assess the effect of IABP on cerebral hemodynamics in high-risk patients undergoing cardiac surgery with cardio-pulmonary bypass (CPB). Methods: This is a substudy of the randomized controlled trial \"Intraaortic Balloon Counterpulsation in Patients Undergoing Cardiac Surgery (IABCS trial)\", performed at the Heart Institute/University of Sao Paulo, from 2014 to 2016. Of the 181 patients included in the IABCS, 67 were included if they were submitted to cardiac surgery and if they had one of these two criteria: left ventricular ejection fraction equal or lower than 40% and/or EuroSCORE equal or higher than 6. Patients were allocated to the strategy of prohylatic IABP after anesthesia induction or to control. Cerebral blood flow velocity (CBFV) through transcranial Doppler and blood pressure (BP) through Finometer or intra-arterial line were continuously recorded over 5 minutes preoperatively (T1), after 24h (T2) and 7 days after surgery (T3). Autoregulation index (ARI) was estimated from the CBFV response to a step change in BP derived by transfer function analysis. The following complications neurologic were evaluated: delirium, cognitive decline and stroke. Results: Of the included patients, 34 were allocated to the IABP group and 33 to control group. There were no significant differences between the IABP and the control respectively in the following parameters: ARI (T1 - 5.5 ± 1.9 vs 5.7 ± 1.7; T2 - 4.0 ± 1.9 vs 4.1 ± 1.6; T3 - 5.7 ± 2.0 vs 5.7 ± 1.6, P= 0.978), CBFV (T1 - 57.3 ± 19.4 vs 59.3 ± 11.8; T2 - 74.0 ± 21.6 vs 74.7 ± 17.5; T3 - 71.1 ± 21.3 vs 68.1 ± 15.1; P=0.952). Both groups (IABP and control) had similar incidence of neurological complications (delirium - 26.5% vs 24.2%, P=0.834, stroke - 3.0% vs 2.9%, P=1.00, and cognitive decline through the scales Mini Mental State Examination MMSE - 16,7% vs 40,7%; P= 0.073 and Montreal Cognitive Assessment MoCA - 79.16% vs 81.5%; P= 1.000). Conclusions: The prophylactic use of IABP in high-risk patients undergoing cardiac surgery does not change the cerebral hemodynamic and is not associated with higher incidence of neurologic complications such as delirium, cognitive decline and stroke

The master thesis deals with flow modeling in the CFD program. By means of which the opti-mal version of the air distribution diffuser in the sports hall will be selected. The first variant will bring fresh air through textile diffusers. The second variant will bring fresh air through flooded large circular diffusers. The tested parameter of the indoor environment will be the flow velocity and the age of the air. The better-performing version will be processed as an implementation documentation.

The subject of this diploma thesis is a comparison between two river hydraulics modeling approaches, the first one being combined 1D and 2D modeling, and the second one being solely 2D modeling. Both models are located at Bečva river, between its 17,282 and 28,419 river kilometer. The outputs of the simulations are water flow velocity maps, water depth maps, maps that show differences between flood areas calculated in both models, tables comparing channel water surface elevations and schematic long sections. In conclusion of the thesis, the outputs of the simulations are compared.

This thesis deals with ultrasound blood flow meter design with emphasis on practical implementation of such device. This medical device is used in ultrasound diagnostic, especially for measuring direction and velocity of blood flow in superficial vessels. This thesis contains consecutive design including description of individual function blocks. Documents for making double-sided printed circuit are included as well.

This diploma thesis discusses fouling processes and mechanisms of industrial heat exchangers, with focus on shell side fouling of heat transfer area by flue gases, and eventually taking fouling into account, or more precisely its modeling and predicting by calculation. Thermal-hydraulic design of heat exchanger is focused mainly on shell side, as flue gases are dominant process medium in terms of fouling and heat transfer. Based on available operational data of evaluated industrial heat exchanger, specific process has been developed to determine by calculation, or more precisely predict change of fouling factor throughout operational period of heat exchanger. Usage and various options of this specific calculation technique are being discussed in conclusion, whether there is a potential to use this technique regarding more complex operational inputs or prediction of fouling process for different operational regime of heat exchanger.

Flow rate measurements are a common topic for process monitoring in chemical engineering and food industry. To achieve the requested low uncertainties of 0:1% for flow rate measurements, a precise measurement of the shear layers of such flows is necessary. The Laser Doppler Velocimeter (LDV) is an established method for measuring local flow velocities. For exact estimation of the flow rate, the flow profile in the shear layer is of importance. For standard LDV the axial resolution and therefore the number of measurement points in the shear layer is defined by the length of the measurement volume. A decrease of this length is accompanied by a larger fringe distance variation along the measurement axis which results in a rise of the measurement uncertainty for the flow velocity (uncertainty relation between spatial resolution and velocity uncertainty). As a unique advantage, the laser Doppler profile sensor (LDV-PS) overcomes this problem by using two fan-like fringe systems to obtain the position of the measured particles along the measurement axis and therefore achieve a high spatial resolution while it still offers a low velocity uncertainty. With this technique, the flow rate can be estimated with one order of magnitude lower uncertainty, down to 0:05% statistical uncertainty.1 And flow profiles especially in film flows can be measured more accurately. The problem for this technique is, in contrast to laboratory setups where the system is quite stable, that for industrial applications the sensor needs a reliable and robust traceability to the SI units, meter and second. Small deviations in the calibration can, because of the highly position depending calibration function, cause large systematic errors in the measurement result. Therefore, a simple, stable and accurate tool is needed, that can easily be used in industrial surroundings to check or recalibrate the sensor. In this work, different calibration methods are presented and their in uences to the measurement uncertainty budget of the sensor is discussed. Finally, generated measurement results for the film flow of an impinging jet cleaning experiment are presented.

INTRODUÇÃO: A utilização de enxertos arteriais na revascularização cirúrgica do miocárdio já está bem estabelecida atualmente pelos cirurgiões cardiovasculares, e sua esqueletização tem apresentado algumas vantagens, a princípio com a artéria torácica interna esquerda. OBJETIVO: Com o objetivo de analisar esse método de dissecção na artéria radial, foram avaliados os desempenhos funcional e hemodinâmico bem como as características morfoanatômicas e histológicas dos enxertos aortocoronários de artéria radial, esqueletizados ou com tecidos adjacentes, na revascularização cirúrgica do miocárdio. MÉTODOS: Foram comparados 40 pacientes, distribuídos randomicamente em dois grupos. No grupo I foi utilizada artéria radial esqueletizada (20 pacientes) e no grupo II, artéria radial com tecidos adjacentes (20 pacientes), para os ramos marginais da artéria coronária esquerda. No total, 39 pacientes foram submetidos a cinecoronariografia e fluxometria com cateter-guia Doppler de 12 MHz (0,014 polegada, Flowire, Jometrics Inc.), no pós-operatório imediato. RESULTADOS: Os dois grupos apresentaram características demográficas semelhantes. As variáveis intra-operatórias principais da artéria radial também foram semelhantes, com comprimento de 17,1 cm no grupo I e de 16,3 cm no grupo II, e débito livre de 80,3 ml/min no grupo I e de 95,5 ml/min no grupo II. Não foram observadas diferenças morfoanatômicas e histológicas nos grupos comparados. Os diâmetros dos enxertos de artéria radial, calculados por meio de angiografia quantitativa no pós-operatório, foram semelhantes (2,66 mm no grupo I e 2,53 mm no grupo II), assim como as variáveis fluxométricas (fluxo sanguíneo de 54,9 ml/min no grupo I e de 44,28 ml/min no grupo II, e reserva de fluxo de 2,12 no grupo I e de 2 no grupo II). Por outro lado, a cinecoronariografia revelou presença de oclusão em um enxerto e estenose em cinco enxertos no grupo II, enquanto o grupo I apresentou estenose em apenas um enxerto de artéria radial (p = 0,091). CONCLUSÕES: Os enxertos aortocoronários de artéria radial tiveram bom desempenho funcional e hemodinâmico precoce. Não houve diferença entre os grupos quanto ao desempenho funcional e hemodinâmico precoce, e quanto às características morfoanatômicas e histológicas. / BACKGROUND: The use of artery grafts in the surgical revascularization of the myocardium is currently a well-established procedure by cardiovascular surgeons, and its skeletonization has posed some advantages, in principle, with the left internal thoracic artery. OBJECTIVE: With the purpose of analyzing this radial artery harvest method, the study evaluated the functional and hemodynamic early performance, as well as the morphological anatomic and histological features of the aortic coronary grafts of the radial artery, skeletonized or with surrounding tissues, in the surgical revascularization of the myocardium. METHODS: The study compared 40 patients, randomly distributed in two groups. In Group I, we employed a skeletonized radial artery (20 patients), and in Group II, the radial artery with surrounding tissues (20 patients), for the marginal branches of the left coronary artery. In total, 39 patients underwent cinecoronariography and fluxometry with a 12-MHz Doppler guide catheter (0.014 in., Flowire, Jometrics Inc.), in the immediate postoperative period. RESULTS: Both groups presented similar demographic features. The main intra-surgical variables of the radial artery were also similar, with an extension of 17.1 cm in Group I, and 16.3 cm in Group II, and the free flow was of 80.3 ml/min in Group I, and of 95.5 ml/min in Group II. No morphological anatomic and histological differences were observed in the compared groups. The diameters of the radial artery grafts, which were calculated by quantitative angiography in the postoperative period, were similar (2.66 mm in Group I, and 2.53 mm in Group II), as well as the flow variables (blood flow of 54.9 ml/min in Group I, and of 44.28 ml/min in Group II, and a flow reserve of 2.12 in Group I, and of 2 in Group II). On the other hand, the cinecoronariography revealed the presence of an occlusion in one graft, and of stenosis in five grafts of Group II, while Group I presented stenosis in only one radial artery graft (p = 0.091). CONCLUSIONS: The aortic coronary grafts of the radial artery displayed good functional and hemodynamic early performance. There was no difference between the groups regarding functional and hemodynamic early performance, and the morphological anatomical and histological features.

A non-reactive model system comprising a highly concentrated and unstable oil-in-water emulsion was used to investigate the retention of oil by the membrane in producing biodiesel with a membrane reactor. Critical flux was identified using the relationship between the permeate flux and transmembrane pressure along with the separation efficiency of the membrane. It was shown that separation efficiencies above 99.5% could be obtained at all operating conditions up to the critical flux. It was observed that the concentration of oil in all collected permeate samples using the oil-water system was below 0.2 wt% when operating at a flux below the critical flux. Studies to date have been limited to the characterization of low concentrated emulsions below 15 vol.%. The average oil droplet size in highly concentrated emulsions was measured as 3200 nm employing direct light scattering (DLS) measurement methods. It was observed that the estimated cake layer thickness of 20 to 80 mm was larger than external diameter of the membrane tube i.e. 6 mm based on a large particle size. Settling of the concentrated emulsion permitted the detection of a smaller particle size distribution (30-100 nm) within the larger particles averaging 3200 nm. It was identified that DLS methods could not efficiently give the droplet size distribution of the oil in the emulsion since large particles interfered with the detection of smaller particles. The content of the smaller particles represented 1% of the total weight of oil at 30°C and 5% at 70°C. This was too low to be detected using DLS measurements but was sufficient to affect ultrafiltration. In order to study the critical flux in the presence of transesterification reaction and the effect of cross flow velocity on separation, various oils were transesterified in another membrane reactor providing higher cross flow velocity. higher cross flow velocity provides better separation by reducing materials deposition on the surface of the membrane due to higher shearing. The oils tested were canola, corn, sunflower and unrefined soy oils (Free Fatty Acids (FFA< 1%)), and waste cooking oil (FFA= 9%). The quality of all biodiesel samples was studied in terms of glycerine, mono-glyceride, di-glyceride and tri-glyceride concentrations. The composition of all biodiesel samples were in the range required by ASTM D6751 and EN 14214 standards. A critical flux based on operating pressure in the reactor was reached for waste cooking and pre-treated corn oils. It was identified that the reaction residence time in the reactor was an extremely important design parameter affecting the operating pressure in the reactor. / Natural Sciences and Engineering Research Council of Canada (NSERC)