Metal fatigue is a recurring problem for metallurgists and materials engineers, especially in structural applications. It has been responsible for many disastrous accidents and tragedies in history. Understanding the micro-mechanisms during cyclic deformation and combating fatigue failure has remained a grand challenge. Environmental effects, like temperature or a corrosive medium, further worsen and complicate the problem. Ultimate design against fatigue must come from a materials perspective with a fundamental understanding of the interaction of microstructural features with dislocations, under the influence of stress, temperature, and other factors. This research endeavors to contribute to the current understanding of the fatigue failure mechanisms. Cast aluminum alloys are susceptible to fatigue failure due to the presence of defects in the microstructure like casting porosities, non-metallic inclusions, non-uniform distribution of secondary phases, etc. Friction stir processing (FSP), an emerging solid state processing technique, is an effective tool to refine and homogenize the cast microstructure of an alloy. In this work, the effect of FSP on the microstructure of an A356 cast aluminum alloy, and the resulting effect on its tensile and fatigue behavior have been studied. The main focus is on crack initiation and propagation mechanisms, and how stage I and stage II cracks interact with the different microstructural features. Three unique microstructural conditions have been tested for fatigue performance at room temperature, 150 °C and 200 °C. Detailed fractography has been performed using optical microscopy, scanning electron microscopy (SEM) and electron back scattered diffraction (EBSD). These tools have also been utilized to characterize microstructural aspects like grain size, eutectic silicon particle size and distribution. Cyclic deformation at low temperatures is very sensitive to the microstructural distribution in this alloy. The findings from the room temperature fatigue tests highlight the important role played by persistent slip bands (PSBs) in fatigue crack initiation. At room temperature, cracks initiate along PSBs in the absence of other defects/stress risers, and grow transgranularly. Their propagation is retarded when they encounter grain boundaries. Another major finding is the complete transition of the mode of fatigue cracking from transgranular to intergranular, at 200 °C. This occurs when PSBs form in adjacent grains and impinge on grain boundaries, raising the stress concentration at these locations. This initiates cracks along the grain boundaries. At these temperatures, cyclic deformation is no longer microstructure- dependent. Grain boundaries don’t impede the progress of cracks, instead aid in their propagation. This work has extended the current understanding of fatigue cracking mechanisms in A356 Al alloys to elevated temperatures.

Cemented carbides (WC-Co) are powder metallurgical products produced by liquid phase sintering. WC-Co is widely used for making a large variety of cutting tools, such as drills and inserts turning applications, due to its great mechanical properties, where the hardness of the WC grains is combined with the toughness of the of the Co binder. WC grain size and grain size distribution are the two most important factors to control the mechanical properties of the products. This study examined the grain growth dependence of different milling and sintering times. The resulting grain size and grain size distribution were measured using image analysis on scanning electron microscopy images (SEM) and by using electron backscatter diffraction (EBSD). In addition, the correlation between hardness and coercivity, the most common indirect measures of grain size, and different methods of calculating average grain radius were investigated. An attempt was also made to study the contribution of defects to grain growth. This work also includes an overview of various grain growth equations and a numerical implementation of these. Experimental results show that for shorter sintering times, powders milled for short times (15 min and 1 h) have larger average grain radii. There is a crossover after 6 to 8 h of sintering, where the powders milled for a long time (40 h and 200 h), have larger average radii. The measured hardness values correlate well with the average grain radius calculated from the grain surface area and the coercivity correlates with the established equations. EBSD measurements detected boundaries that could not be detected by image analysis, and that were not Sigma 2 boundaries. It is likely that these boundaries are either low energy boundaries or boundaries between grains that are very closely oriented. Comparing heat-treated powder with the untreated resulted in a lower average grain size after sintering for the heat-treated powder. None of the growth equations investigated in this work could fully describe the experimental grain growth. Through increased understanding of the grain growth, the growth can be controlled and the end product can have the desired tool properties. The occurrence of abnormal grains in cutting tool applications can cause breakage, which is especially important to avoid in applications such as PCB drills. A correlation between hardness and grain size provides further means for cheap and fast indirect measures of the grain size in production. / Hårdmetall är ett pulvermetallurgiskt material som tillverkas genom smältfassintring och som kännetecknas av hårdhet, styvhet och god slitstyrka. Volframkarbidens (WC) kornstorlek och kornstorleksfördelning är två viktiga faktorer för att kontrollera de mekaniska egenskaperna i hårdmetall. I den här studien har korntillväxtens beroende på malning och sintring undersökts. WC-Co maldes och sintrades fyra olika tider och kornstorleksfördelningen mättes med bildanalys på svepelektronmikroskopbilder samt med ``electron backscatter diffraction'' (EBSD). I arbetet har även korrelationen mellan hårdhet, koercivitet och olika sätt att beräkna medelkornstorleken undersökts. Ett försök har också genomförts för att studera hur defekterna i det malda pulvret påverkar korntillväxten. I arbetet har även ett flertal olika tillväxtekvationer modellerats numeriskt och för och nackdelar med de olika tillväxtekvationerna har vägts mot varandra. En lång maltid (40 h och 200 h) visade sig ge liten kornstorlek för sintring kortare än 6 h, men för sintringar längre än 8 h gav istället kort malning (15 min och 1 h) den mindre kornstorleken. Det visade sig att uppmätt hårdhet korrelerar bäst med den medelkornstorleksradie som räknats fram från kornytan. I EBSD mätningarna kunde man observera ett flertal korngränser, utöver Sigma 2 korngränser, som inte hade detekterats med bildanalys. Värmebehandlingen av det malda pulvret minskade korntillväxten under efterföljande sintring. Ingen av de undersökta tillväxtekvationerna kunde beskriva de experimentella resultaten fullt ut. Genom ökad förståelse för korntillväxt kan man kontrollera tillväxten och slutprodukten kan få önskade egenskaper. Förekomsten av abnorm korntillväxt i skärverktyg i hårdmetall är en av de vanligaste kritiska defekterna och det är speciellt viktigt är undvika korntillväxt i tillverkning av små verktyg, som till exempel kretskortsborrar. Hårdhet och koercivitet är de vanligaste indirekta mätmetoderna för att mäta kornstorlek i produktion. En bra korrelation mellan kornstorlek och indirekta mätmetoder ger utökade verktyg för snabba och billiga mätningar.

Ce travail vise à améliorer la compréhension de la microstructure d’aciers ferritiques appelés aciers ODS. Ils sont fabriqués par métallurgie des poudres, ce qui inclut le cobroyage d’une poudre ferritique avec une fine poudre d’oxydes, suivi d'une consolidation à haute température. La consolidation permet de former un matériau dense renforcé par des particules nanométriques qui sont responsables des bonnes propriétés mécaniques à haute température. Cependant, les procédés conventionnels, notamment la Compaction Isostatique à Chaud, provoquent des microstructures hétérogènes qui étaient jusqu’à ce jour mal comprises. Ainsi, la technique rapide de consolidation assistée par courant électrique appelée "Spark Plasma Sintering" (SPS), a été testée afin d’étudier la microstructure. Pour la première fois, on montre que d’excellentes propriétés mécaniques peuvent être obtenues par SPS, comparables à celles des matériaux ODS obtenus classiquement par Compaction Isostatique à Chaud, mais avec un temps de procédé largement réduit. Cependant, la consolidation par SPS échoue quand il s’agit d’obtenir une micro-structure ferritique homogène. En effet, malgré la cinétique rapide de consolidation, on obtient des grains dits ultrafins (D < 500 nm) entourée de grains plus grossiers (D >10 μm). Une caractérisation microstructurale poussée a permis de comprendre l’évolution du matériau durant la consolidation. Un modèle d’évolution microstructurale a été proposé. Le calcul des pressions gouvernant la mobilité des interfaces souligne l’importance de la déformation plastique hétérogène issue du cobroyage des poudres. Par ailleurs, il est montré que la précipitation des particules d’oxydes ancre les joints de grains et stabilise la microstructure hétérogène, même à très haute température. On montre aussi qu’augmenter la teneur en renforts n’empêche pas la croissance anormale mais permet de contrôler la fraction et la taille de grains ultrafins, et donc les propriétés mécaniques des ODS. Parce que les particules jouent un rôle primordial dans la croissance des grains, une caractérisation fine de l’état de précipitation a été réalisée sur les matériaux consolidés par SPS. L’étude par Microscopie Electronique en Transmission, Diffusion des Neutrons et Sonde Atomique révèle une grande densité d’oxydes qui varient en taille et en composition chimique. Un modèle thermodynamique de type germination/croissance/coalescence a été développé pour simuler les cinétiques de précipitation des phases Y2O3 et Y2Ti2O7 durant les étapes de consolidation non isothermes. Tant les résultats expérimentaux que numériques démontrent la précipitation rapide des nano-particules qui sont ensuite extrêmement stables durant les recuits. Ce modèle permet de mieux comprendre la spécificité des microstructures et de la précipitation dans les ODS, de la formation rapide de particules nanométriques à la précipitation grossière d’oxydes de titane aux interfaces. / This work aims to lighten the understanding of the behavior of a class of metallic materials called Oxide-Dispersion Strengthened (ODS) ferritic steels. ODS steels are produced by powder metallurgy with various steps including atomization, mechanical alloying and high-temperature consolidation. The consolidation involves the formation of nanoparticles in the steel and various evolutions of the microstructure of the material that are not fully understood. In this thesis, a novel consolidation technique assisted by electric field called "Spark Plasma Sintering" (SPS) or "Field-Assisted Sintering Technique" (FAST) was assessed. Excellent mechanical properties were obtained by SPS, comparable to those of conventional hot isostatic pressed (HIP) materials but with much shorter processing time. Also, a broad range of microstructures and thus of tensile strength and ductility were obtained by performing SPS on either milled or atomized powder at different temperatures. However, SPS consolidation failed to avoid heterogeneous microstructure composed of ultrafine-grained regions surrounded by micronic grains despite of the rapid consolidation kinetics. A multiscale characterization allowed to understand and model the evolution of this complex microstructure. An analytical evaluation of the contributing mechanisms can explain the appearance of the complex grain structure and its thermal stability during further heat treatments. Inhomogeneous distribution of plastic deformation in the powder is argued to be the major cause of heterogeneous recrystallization and further grain growth during hot consolidation. Even if increasing the solute content of yttrium, titanium and oxygen does not impede abnormal growth, it permits to control the fraction and the size of the retained ultrafine grains, which is a key-factor to tailor the mechanical properties. Since precipitation through grain boundary pinning plays a significant role on grain growth, a careful characterization of the precipitation state was performed on consolidated ODS steels. The experimental data obtained by transmission electron microscopy, small angle neutron scattering and atom-probe tomography evidenced the presence of dense and nanosized particles in SPS ODS steels, similarly to what is observed in conventional ODS steels. This is of great importance since it proves that the precipitation is very rapid and mainly occurs during the heating stage of the consolidation process. Using a thermodynamic model, the precipitation kinetics of Y2O3 and Y2Ti2O7 were successfully reproduced at various consolidation temperatures. Both experimental and numerical findings agree with the rapid precipitation of nanoparticles that are then extremely stable, even at high temperature. Consequently, this model can be an efficient tool to design ODS steelsby the optimization of the precipitation state.

The use of pre-hardened mold steels has increased appreciably over the years; more than 80% of the plastic mold steels are used in pre-hardened condition. These steels are delivered to the customer in finished state i.e. there is no need of any post treatment. With hardness around ~40HRC, they have properties such as good polishability, good weldability, corrosion resistance and thermal conductivity. Machinability is a very important parameter in pre-hardened mold steels as it has a direct impact on the cost of the mold. In normal machining operations involving intricate or near net shapes, machining constitutes around 60% of the total mold cost. Efforts are underway to explore every possible way to reduce costs associated with machining and to make production more economical. All the possible parameters which are considered to affect the machinability are being investigated by the researchers. This thesis work focuses on the effect of prior austenite grain size on the machinability of pre-hardened mold steel (Uddeholm Nimax).  Austenitizing temperatures and holding times were varied to obtain varying grain sized microstructures in different samples of the same material. As it was difficult to delineate prior-austenite grain boundaries, experimental and empirical methods were employed to obtain reference values. These different grain sized samples were thereafter subjected to machining tests, using two sets of cutting parameters. Maximum flank wear depth=0.2mm was defined for one series of test which were more akin to rough machining, and machining length of 43200mm or maximum wear depth=0.2mm were defined for second series of tests which were similar to finishing machining. The results were obtained after careful quantative and qualitative analysis of cutting tools. The results obtained for Uddeholm Nimax seemed to indicate that larger grain sized material was easier to machine. However, factors such as retained austenite content and work hardening on machined surface, which lead to degradation of machining operations were also taken into consideration. Uddeholm Nimax showed better machinability in large grained samples as retained austenite(less than 2%) content was minimal in the large grained sample. Small grained sample in Uddeholm Nimax had a higher retained austenite (7+2%) which resulted in degradation of machining operation and a lesser cutting tool life.