Orientador: Marcos David Ferreira / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Agrícola / Made available in DSpace on 2018-08-19T15:37:33Z (GMT). No. of bitstreams: 1 Rodrigues_MicheleCarvalhodaSilva_M.pdf: 1787890 bytes, checksum: ad42d636315e1e015773f4c6f3929bd8 (MD5) Previous issue date: 2011 / Resumo: O beneficiamento da batata lavada no Estado de São Paulo, destinada ao mercado in natura ou ao processamento, consome volume excessivo de água, provocando danos ao meio ambiente principalmente no descarte da água residual da etapa de lavagem. Tendo em vista a exigência do mercado consumidor por batata lavada, e a necessidade da redução do consumo de água utilizado para este tipo de beneficiamento, a hipótese deste trabalho é a de que é possível reduzir o consumo de água na etapa de lavagem da batata modificando os parâmetros de funcionamento dos equipamentos utilizados atualmente (vazão e rotação), mantendo a eficiência de limpeza, sem afetar a qualidade do produto. Sendo assim, o objetivo deste trabalho foi avaliar a etapa de limpeza em linhas de beneficiamento de batata lavada produzida no Estado de São Paulo, e propor modificações para redução no volume de água com manutenção da qualidade do produto e da eficiência de limpeza. Para tanto, inicialmente foi realizada a avaliação de desempenho da etapa de limpeza em unidades de beneficiamento de batata lavada no Estado de São Paulo, identificando o método de lavagem, os tipos de roletes/escovas, velocidade média do produto, e volume de água consumido. A partir do estudo de desempenho, foram propostas alterações para melhoria na etapa de limpeza com relação ao volume de água consumido e a limpeza do produto. A eficiência de limpeza, o consumo de água, e a influência do beneficiamento na qualidade da batata lavada foram avaliados e comparados nos sistemas propostos, onde foram avaliadas três rotações para as escovas, e três vazões de água na lavagem de tubérculos de dois solos com diferentes teores de argila. A qualidade do produto beneficiado foi avaliada por meio dos parâmetros: perda de massa fresca, coloração, danos físicos e firmeza. Neste trabalho foi possível verificar que o consumo de água nas unidades de beneficiamento pode ser reduzido, mantendo a eficiência de limpeza do produto, apenas com ajustes de vazão e rotação do equipamento de lavagem. Com relação à qualidade, verificou-se o incremento na perda de massa e incidência de brotamento, e redução da e firmeza da batata lavada em comparação aos tubérculos não lavados / Abstract: The washing for potatoes in São Paulo, for the fresh market or industry, consumes excessive amounts of water, causing damage to the environment mainly due to waste water discharge from the washing step. Considering the requirement of the consumer market for washed potatoes, and the need to reduce water consumption, the hypothesis is that it is possible to reduce water consumption on the washing of potato just modifying the configuration of the equipment currently used (flow and rotation), and maintaining the cleaning efficiency without affecting quality. Therefore, the main goal was to evaluate the cleaning step in processing lines of washed potatoes produced in the state of Sao Paulo, and propose modifications to reduce the amount of water and with maintenance of product quality and cleaning efficiency. Therefore, early, characterization of the cleaning step was made in processing and classification units of washed potatoes in the state of Sao Paulo, identifying the method of washing used, types of rollers / brushes, average speed of the product, and water volume consumed on this step. From the characterization study, changes were proposed in the cleaning step that would improve the efficiency with respect to water consumption and cleaning product. The cleaning efficiency, water consumption, and influence of improvement in the quality of washed potatoes were evaluated and compared in the proposed systems. The quality of the processed product was evaluated by the following parameters: weight loss, color, physical damage and firmness. In this study, it was possible to verify that water consumption on processing units can be reduced maintaining cleaning efficiency, only adjusting water flow and rotation of the equipment. Related to tuber quality, it was also observed an increase of mass and firmness loss, and sprouting of washed potatoes compared with unwashed tubers / Mestrado / Tecnologia Pós-Colheita / Mestre em Engenharia Agrícola

The harvest of small trees known popularly as Christmass Tree", is made with manual tools and it is a hard, stressing and slow job. Observing people, who develop these kinds of activities, is intend to study an automatic machine to carry through this task. This work presents initially, the description of the currently processes used for the harvest and a bibliographical revision of the theme. It a proposal presents of the machine, the methodology and the mathematical development of the mechanical project as well as the modeling of the hydraulic systems. From the sizing of the any parts of the machine one presents the drawings of details and the assembly. They are facts, still, assays "in-it lease" to verify the consistency of the ground and the parameters of operation of the machine. The developed machine allows to be directed until the place of the harvest and processes a system of automatic leveling for an inclination of the land, of about, 17. / A colheita de pequenas árvores conhecidas popularmente como tuias, é feita com ferramentas manuais e é um trabalho árduo, desgastante e demorado. Observando o trabalho das pessoas nesta atividade, passa-se a estudar uma maquina automatizada para realizar essa tarefa. Este trabalho apresenta inicialmente a descrição dos processos utilizados atualmente para a colheita e uma revisão bibliográfica do assunto. Apresenta a proposta de uma máquina, a metodologia e o desenvolvimento matemático do projeto mecânico. A partir do dimensionamento das diversas partes da máquina apresentam-se os desenhos de detalhes e do conjunto. São feitos, ainda, ensaios in-loco para verificar a consistência do solo e dos parâmetros de operação da máquina. A máquina desenvolvida permite ser dirigida até o local da colheita e possui um sistema de nivelamento automático para uma inclinação do terreno de, até, 17.

Harvest weed seed control (HWSC) methods concentrate, remove, or destroy weed seeds captured by the combine during harvest. Furthermore, chaff lining uses a chute fitted on the back of a combine to concentrate chaff and weed seed therein into a narrow line. Since chaff amount increases with crop yield, studies aimed to determine how varying crop yield and the associated chaff amount will affect chaff lining control of select weed species, while also examining subsequent crop performance. Objective 1 of this work focused on wheat chaff lining (WCL), and objective 2 studied soybean chaff lining (SCL). Weed species of interest included wild mustard (Sinapis arvensis L.) and Italian ryegrass (Lolium perenne ssp. multiflorum L. Husnot) in WCL and Palmer amaranth (Amaranthus palmeri S.) and common ragweed (Ambrosia artemisiifolia L.) subject to SCL. Each weed species was evaluated in separate experiments, and the SCL experiment included an additional factor of with and without a cereal rye cover crop treatment. Chaff lines mimicked harvest across a range of wheat and soybean yields, with equal weed seed additions (based on existing fecundity and seed shatter phenology data) to each chaff line. A conventional harvest (control) and an outside-the-chaff-line treatment were included, where total fecundity or weed seed rain occurring prior to harvest based on weed species were broadcast respectively. Inhibition of crop and weed emergence as a function of yield and the associated chaff amount was also investigated in the greenhouse. Crop yield across treatments at the field scale (accounts for both chaff lines and outside-the-chaff-line), was not affected in double-crop soybean following WCL and full-season soybean following SCL. Field scale wheat yield in WCL compared to conventional harvest was not different, increased, or decreased in 8, 3, and 1 site-years, respectively. WCL reduced total weed emergence over the combined double-crop soybean and winter wheat growing seasons by 43-54% at the field scale. SCL reduced common ragweed emergence in cereal rye by 64% and 85% in 2 of 3 locations across the soybean growing season. The cover crop did not reduce common ragweed emergence while it was growing, but residual mulch in soybean reduced emergence by 39%. No differences were observed in Palmer amaranth emergence during cereal rye growth, however cereal rye decreased total emergence by 41%. In 6 of 7 Palmer amaranth location-years, SCL decreased field scale weed emergence in soybean by 81%. These results indicate chaff may create an unfavorable environment for weed seed emergence. In both WCL and SCL, greater amounts of chaff caused larger reductions in weed emergence. Objective 3 focused on quantifying the above-ground biomass breakdown of soybean plants into chaff, straw, and seed fractions as they are processed and dispensed by various harvesters. Depending on HWSC system, chaff and straw residues may also be destroyed, removed, or concentrated. Therefore, chaff and straw nutrient composition was analyzed to evaluate the nutrient and economic consequences of HWSC. Our results show average soybean harvest index is 0.57:1. Furthermore, chaff and straw residues equal 13.4% and 68.5% of the seed weight, respectively. Using 5-year average fertilizer prices (2017 – 2021), replacement of N, P, K and S in chaff, straw, and the combination of both residues costs USD 1.58, USD 5.88, and USD 7.46, respectively. / Master of Science in Life Sciences / In conventional wheat and soybean production, the primary means of weed control is herbicides. If herbicide use is not diversified, a repeated selection pressure drives weeds to evolve resistance to such chemistries. Producers and researchers alike are constantly looking for new ways to combat weeds and herbicide-resistant issues. Originally developed to control nuisance weeds in Australia, harvest weed seed control (HWSC) offers promise in aiding our current herbicide resistance crisis. To further explain HWSC, it is important to know the harvesting mechanism. Many of the row crops including corn, soybean and wheat are harvested using a combine. Combines cut below or tear off plant material to capture the grain or seed which is processed via a threshing system and separated into three fractions: the seed, chaff, and straw. The grain is allocated to a storage bin and eventually removed from the field. In conventional harvest, the remaining crop residue is spread evenly behind the combine across the field to ensure a balanced distribution of organic matter, nutrients, and residue across the field. There is however more than chaff and straw being dispersed. Weeds present in the field at harvest whose seed is retained at crop maturity and at an elevation above the combine header height will inherently end up inside the combine. HWSC are methods intended to capitalize on the combine capturing weed seeds during harvest. Many HWSC approaches to managing weed seed exist, including destruction, removal and concentration of weed seed. Most of this research focuses on only one method of HWSC, chaff lining. Chaff lining utilizes a chute fitted onto the back of the combine and concentrates weed seed and the chaff fraction only into a narrow line behind the combine. Although not directly known, chaff may inhibit future weed emergence within the line due to a mulching effect, intraspecific competition, a greater degree of rotting and increased seed predators. The chute is inexpensive to construct, and there are no additional labor requirements at harvest making it an appealing HWSC option. There is a limited amount of research on chaff lining in North American cropping systems making it a prime HWSC candidate for this thesis. We were curious if chaff lining could benefit wheat and soybean farmers and if crop yield and the associated chaff amount deposited in chaff lines would have any impact on crops planted and weeds placed in lines. Our results indicate chaff lining does not cause field scale yield consequence in double-crop and full-season soybean following wheat and soybean chaff lining, respectively. The effect of wheat chaff lining on wheat field scale yield was variable, but only caused a yield decrease in 1 of 12 experimental locations. Reductions in weed emergence in chaff lining systems compared to conventional indicate chaff may alter the environment to be unfavorable for weed seed emergence. The final objective of this thesis investigates the economic cost of nutrient loss among HWSC systems. Using average fertilizer prices, the cost to apply N, P, K and S concentrated or lost during HWSC in chaff, straw, and the combination of both residues is USD 1.58, USD 5.88, and USD 7.46, respectively.

Beim Parameter „Druscheignung“ eines Bestandes wird gemeinhin angenommen, dass dieses Kriterium durch die Genetik der Sorte und den Witterungsverlauf, weitgehend unbeeinflusst von Landwirt, festgelegt ist. Und dennoch verändert der Landwirt mit all seinen Entscheidungen von der Auswahl der Sorten, über die Düngung, den Pflanzenschutz bis hin zum Erntemanagement die Druscheignung stetig. Zur Ernte, als letzten Abschnitt der Verfahrenskette, entfaltet die Druscheignung dann außerordentlich große ökonomische Auswirkungen. Anhand verschiedener Beispiele aus Züchtung, Pflanzenernährung, Pflanzenschutz und Erntetechnologie wurde dargestellt, wie auf die Druscheignung Einfluss genommen werden kann und wie diese Auswirkungen monetär zu bewerten sind. Aus dem Bereich der Züchtung wurde die Entwicklung eines neuen Wuchstyps bei den Rapshalbzwergen ausgewählt, der mit weniger Biomasse konkurrenzfähige Erträge erzielt. Die Abreife ist einheitlicher, der Erntetermin kann problemloser fixiert werden, der Drusch ist leistungsstark und verlustarm. Späte und intensiv geführte Sorten sind mit Hilfe einer Sikkation zeitlich früher und leichter zu beernten. Das schafft Erntesicherheit bei geringeren Verlusten, höheren Mähdrescherleistungen und sinkendem Kraftstoffverbrauch. Die bedarfsgerechte Ausbringung des Stickstoffs in Art, Menge und Zeit, entsprechend der kleinräumigen Heterogenität eines Schlages, führt zu einer Homogenisierung der Bestände. Die Bestände reifen gleichmäßiger ab und führen zu etwa 20 Prozent höherer Mähdrescherleistung sowie geringerem Kraftstoffverbrauch. Am Beispiel des Hochschnitts wurde verdeutlicht, wie sich die bessere Beerntbarkeit auf Maschinenkosten, Gesamternteverluste, Qualität und Trocknung auswirkt. Hebt man die Stoppellänge um 10 Zentimeter an, lässt sich die Mähdrescherleistung um ca. 15 bis 20 Prozent steigern. Diese Beispiele unterstreichen zugleich die Forderung, dass die Druscheignung nicht erst zur Ernte diese Führungsrolle übernimmt, sondern auch in den vorgelagerten Verfahrensabschnitten als ein starkes Entscheidungskriterium gelten muss. / The parameter “threshability” of a stand is commonly assumed to be a criterion defined by the genetics of the strain and the weather conditions which is mainly not influenced by the farmer. Nevertheless, the farmer continuously changes the “threshability” with all his decisions, from the selection of the strains, via the use of fertilizers to the harvest management. For harvest, as the last stage of the process chain, the threshability develops extraordinarily high economic effects. On the basis of several examples from cultivation, plant nutrition, plant protection and harvest technology it was described, how the threshability can be influenced and how this effect is to be assessed monetarily. In the field of cultivation, the development of a new growth type of semi-dwarf rape has been selected, which yields competitive returns with less bio mass. Ripeness is more homogeneous, the harvest date can be fixed without problems, threshing is efficient and with low loss. Using the method of siccation, late and intensively controlled strains can be harvested earlier and easier. This offers harvest safety with low loss, higher combine harvester performance and reduced fuel consumption.The need-based spreading of nitrogen referring to type, quantity and time according to the small-scale spatial heterogeneity of a field leads to a homogenisation of the stands. The stands ripen more evenly and this fact causes about 20 percent higher combine harvester performance, as well as reduced fuel consumption. Using the example of high-cut top harvest it was clarified how the better harvestability influences the machine costs, the total harvest losses, the quality, and the drying process. If the length of the stubbles is extended by 10 centimetres, the combine harvester performance can be increased by 15 to 20 percent. These examples also emphasize the requirement that the threshability does not just take over the leading role for the harvest but has also to be considered as a strong decision criterion within the prior stages of the process.

Apples stored onshore in Australia and New Zealand, are maintained at optimal storage conditions with the aid of low temperatures; controlled atmospheres (CA) and new technologies that retard the production or effect of ethylene (AVG and 1-MCP respectively). These technologies allow distribution of the highest quality apples to local and export markets on a year round basis. However, during distribution, maintenance of optimal storage conditions may be lost due to refrigeration system breakdown, operational constraints or management decisions. This thesis quantifies the influence of commercially realistic breaks in optimal storage conditions (temperature and CA) on fruit physiology and quality, both at the time of the break and in subsequent optimal storage conditions. The ‘Cripps Pink’ (‘Pink Lady™’) apple cultivar was chosen for consideration in this thesis because it is a high value cultivar that is of considerable importance to the Australian apple industry. The knowledge of the behaviour of ‘Cripps Pink’ apples in coolstorage conditions (in air and CA) was confirmed through comparison of physiological and quality change behaviour of fruit from three harvests collected in this research and those reported recently by other authors. The investigation of the influence of breaks in temperature control during storage in air at 0°C, revealed that preclimacteric apples exposed to a break in temperature control, were advanced towards the establishment of the climacteric. Postclimacteric apple, responded by doubling ethylene production a short time after return to coolstorage. Harvest maturity, timing of break during coolstorage, length of break of temperature control and multiple breaks in temperature control, had little influence on the increase ethylene production response. Quality factors (firmness, background hue angle, and titratable acidity) were all reduced as a result of exposure to warmer temperatures, but on return to coolstorage temperatures rates of loss in these quality factors were not influenced by the increased ethylene production. Short-term (3-day) breaks in CA while fruit remained at refrigerated temperatures were shown to have no substantial effect on fruit physiology or quality, either during the period of the break in CA or in subsequent CA storage. Breaks in temperature control in combination with breaks in CA were observed to cause a doubling of ethylene production on CA stored apples regardless of being returned to 0°C in air or CA. Those apples that were exposed to a break in temperature control and returned to air storage at refrigerated temperature lost quality (firmness and background hue angle) more rapidly than apples not exposed to breaks in temperature control and transferred to air storage. This result strengthened the knowledge of the influence of ethylene on changes in apple quality, as found for many other apple cultivars. The influence of the decision to transport fruit in CA or air atmosphere shipping containers was initially investigated with a laboratory simulation. Physiology (respiration rate and ethylene production) of air shipped fruit was found not only to be more rapid, but more variable between fruit, than for apples shipped in CA. This more rapid and larger variation of possible fruit physiologies, suggests that in addition to losing quality at a faster rate, the variation in the quality of fruit shipped in air will also enlarge during shipment. This hypothesis was confirmed with data pooled from treatments subjected to 0°C and 3°C, simulating the likely temperature variability within a shipping container. Validation of the influence of shipping atmosphere on delivered fruit quality, was conducted in the commercial environment. This trial found that the length of time to ship fruit from Australia and New Zealand to European markets was not sufficient to induce commercially significant differences between ‘Cripps Pink’ apples shipped in the two atmospheres. Finally, as ethylene production was influenced by fluctuations in temperature control and subsequently affected quality of apples previously stored in CA, an investigative attempt to model ethylene production in temperature variable scenarios was conducted. Published models of ethylene production in apples were adapted to the variable temperature storage scenario and a new model was proposed. Unfortunately, none of the models investigated were able to predict all of the consistent behaviours of ethylene production observed during the experimental work, indicating that more knowledge of the ethylene production pathway is required, before modelling of ethylene production and subsequently apple quality can be conducted successfully.

The declining cost of photovoltaic (PV) modules has enabled the vision of ubiquitous photovoltaic (PV) power to become feasible. Emerging PV technologies are facilitating the creation of intentionally non-flat PV modules, which create new applications for this sustainable energy generation currently not possible with the traditional rigid, flat silicon-glass modules. However, since the photovoltaic cells are no longer coplanar, there are significant new requirements for the power electronics necessary to convert the native form of electricity into a usable form and ensure maximum energy harvest. Non-uniform insolation from cell-to-cell gives rise to non-uniform current density in the PV material, which limits the ability to create series-connected cells without bypass diode or other ways to shunt current, which is well known in the maximum power tracking literature. This thesis presents a modeling approach to determine and quantify the variations in generation of energy due to intentionally non-flat PV geometries. This will enable the power electronics circuitry to be optimized to harvest maximum energy from PV pixel elements – clusters of PV cells with similar operating characteristics. This thesis systematically compares different geometries with identical two-dimensional projection "footprints" for energy harvest throughout the day. The results show that for the same footprint, a semi-cylindrical surface harvests more energy over a typical day than a flat plate. The modeling approach is then extended to demonstrate that by using non flat geometries for PV panel, the availability of a remotely located stand-alone power system can be increased when compared to a flat panel of same footprint. These results have broad application to a variety of energy scavenging scenarios in which either total energy harvested needs to be maximized or unusual geometries for the PV active surfaces are required, including building-integrated PV. This thesis develops the analysis of the potential energy harvest gain for advanced non-planar PV collectors as a necessary first step towards the design of the power electronics circuits and control algorithms to take advantage of the new opportunities of conformal and non-flat PV collectors.

There has been increased interest in utilizing switchgrass (Panicum virgatum) as biomass. There are several challenges to developing this industry, and these have led to the potential use of switchgrass as hay for feeding beef cattle in Kentucky. The effect of increasing maturity on crude protein (CP), neutral detergent fiber (NDF), acid detergent fiber (ADF) and nutritive values of switchgrass hay has been well documented, but few in vivo intake and digestibility trials have been conducted to assess this effect on animal performance when feeding beef cattle. Two in vivo intake and digestibility trials were conducted in 2011 in which Angus x Hereford beef steers (200-265 kg) were fed Alamo and Cave-in-Rock switchgrass harvested as late vegetative, boot, and early flowering hay. The objectives of these trials was to evaluate the effect of increasing maturity on apparent dry matter intake (DMI), digestible dry matter intake (DDMI), and dry matter digestibility (DMD); and to discuss potential challenges that producers might face if incorporating switchgrass hay into their forage program for feeding beef cattle. Observed decreases in nutritive value, DMI, DDMI, and DMD indicate that producers should harvest Alamo and Cave-in-Rock switchgrass before it reaches the boot stage of maturity.

O vinho fino é aquele produzido com uvas Vitis Vinifera. Um bom vinho deve apresentar um equilíbrio entre as suas características químicas e organolépticas. A uva precisa estar em condições físicas e bioquímicas adequadas para que o vinho resulte em qualidade máxima. O transporte e o tempo de espera para o processamento nas vinícolas constituem-se fatores importantes para a produção de vinhos. O trabalho teve como objetivo identificar o impacto destes fatores na qualidade dos vinhos finos produzidos no Estado do Rio Grande do Sul. A metodologia contemplou análises qualitativas e quantitativas realizadas com vinhos tintos e brancos produzidos com uvas nas safras de 2013 e 2014. Foram identificados fatores críticos que devem ser observados durante o transporte e o pré-processamento, os quais são vitais para a manutenção e integridade das uvas. Os resultados revelaram que o transporte e o tempo de espera para o processamento das uvas, modificam as características físico-químicas e sensoriais dos vinhos. As alterações observadas foram de diferentes intensidades em função das safras, da uva (Chardonnay e Merlot), da distância entre o local da colheita e da vinícola, e das temperaturas durante o transporte e o tempo de espera. / The fine wine is the one produced with Vitis Vinifera grape. A good wine must present a balance between chemical and organoleptic characteristics. The grape must be in adequate physical and biochemical conditions for the wine to reach the highest quality. The transport and the waiting time for processing at the wineries are important factors for the production of wines. The study aimed to identify the impact of these factors on the quality of the fine wines produced in the state of Rio Grande do Sul. The methodology included the qualitative and quantitative analysis carried out on red and white wines produced with grapes from the 2013 and 2014 harvest. Critical factors that should be observed during transport and pre-processing were identified, which are vital for the maintenance and integrity of the grapes. The results reveal that the transport and waiting time for processing changed the physical, chemical and sensorial characteristics of the wine. These changes were of different intensities depending on the crop, of the grape (Chardonnay and Merlot), the distance between the place of harvest and the winery, and the temperatures during transport and waiting time.

Orientador: Ben-Hur Mattiuz / Banca: José Fernando Durigan / Banca: José Maria Monteiro Sigrist / Resumo: O objetivo deste trabalho foi caracterizar o ponto de colheita de pêssegos da cv. Aurora-1, pela curva de maturação dos frutos, e sua conservação póscolheita, quando colhidos em dois estádios de maturação, empregando-se temperaturas e embalagens. Em 2005 foi realizado experimento para caracterizar os estádios de maturação "de vez" e maduro, através da curva de maturação. Está curva de maturação demonstrou que dos 90-97 dias os frutos encontravam-se "de vez" (maturidade fisiológica), dos 97 aos 104 dias encontravam-se maduros e que dos 104 aos 111 dias estavam "sobremaduros". Em 2006, foram realizados os experimentos de armazenamento dos frutos nos estádios "de vez" e maduro, às temperaturas de 2°C, 6°C, 12°C e 22°C, utilizando-se diferentes embalagens (controle; PD-900®; PVC e PET). Os pêssegos colhidos no estádio "de vez" e armazenados sob condições controladas de ambiente (22±2ºC e 71± 7% UR) apresentaram maior vida de prateleira (8 dias) e plenas condições de atingir a maturação comercial, quando comparados aos frutos maduros (2 dias). O armazenamento refrigerado demonstrou que os pêssegos 'Aurora-1' não são sensíveis ao frio nas temperaturas testadas, e ou os armazenados a 2°C mantiveram sua vida útil por 35 e 28 dias, nos estádios "de vez" e maduros, respectivamente. A qualidade dos frutos não foi afetada com o uso das embalagens, favorecendo o aumento da vida útil para 24 dias quando comparados ao tratamento controle (16 dias). Pelos resultados obtidos pode-se concluir que os pêssegos colhidos no estádio de maturação "de vez" apresentaram maior vida de prateleira, quando associado à temperatura de 2°C e à embalagem PD-900. / Abstract: This study was undertaken to characterize the ideal moment for harvest of 'Aurora-1' peaches though the fruit ripening curve, as well as their postharvest conservation when harvested at two ripening stages with different temperatures and packages. The experiment was carried out in 2005 to characterize the ripening stages, mature and ripe, through the ripening curve. The ripening curve showed that between 90-97 days fruit were mature (physiological maturity), from 97 to 104 days fruit were ripe and between 104 and 111 fruit were overripe. Storage experiments were conducted in 2006 for the ripening stages mature and ripe at temperatures of 2°C, 6°C, 12°C and 22°C, using different packages (control; PD-900®; PVC and PET). Peaches harvested at the mature stage and stored under controlled conditions (T = 22±2°C and RH = 71±7%) showed higher shelf life (8 days) and were able to reach commercial ripening in comparison to ripe fruit (2 day shelf-life). Refrigerated storage showed that 'Aurora-1' peaches are not sensitive to the cold temperatures tested, and fruit stored at 2°C had a shelf life of 35 and 28 days (mature and ripe, respectively). Fruit quality was not affected by packages, which allowed a shelf-life increase of 24 days in comparison to control (16 days). Results show that peaches harvested mature have a longer shelf life when stored at 2°C with the package PD-900. / Mestre

O vinho fino é aquele produzido com uvas Vitis Vinifera. Um bom vinho deve apresentar um equilíbrio entre as suas características químicas e organolépticas. A uva precisa estar em condições físicas e bioquímicas adequadas para que o vinho resulte em qualidade máxima. O transporte e o tempo de espera para o processamento nas vinícolas constituem-se fatores importantes para a produção de vinhos. O trabalho teve como objetivo identificar o impacto destes fatores na qualidade dos vinhos finos produzidos no Estado do Rio Grande do Sul. A metodologia contemplou análises qualitativas e quantitativas realizadas com vinhos tintos e brancos produzidos com uvas nas safras de 2013 e 2014. Foram identificados fatores críticos que devem ser observados durante o transporte e o pré-processamento, os quais são vitais para a manutenção e integridade das uvas. Os resultados revelaram que o transporte e o tempo de espera para o processamento das uvas, modificam as características físico-químicas e sensoriais dos vinhos. As alterações observadas foram de diferentes intensidades em função das safras, da uva (Chardonnay e Merlot), da distância entre o local da colheita e da vinícola, e das temperaturas durante o transporte e o tempo de espera. / The fine wine is the one produced with Vitis Vinifera grape. A good wine must present a balance between chemical and organoleptic characteristics. The grape must be in adequate physical and biochemical conditions for the wine to reach the highest quality. The transport and the waiting time for processing at the wineries are important factors for the production of wines. The study aimed to identify the impact of these factors on the quality of the fine wines produced in the state of Rio Grande do Sul. The methodology included the qualitative and quantitative analysis carried out on red and white wines produced with grapes from the 2013 and 2014 harvest. Critical factors that should be observed during transport and pre-processing were identified, which are vital for the maintenance and integrity of the grapes. The results reveal that the transport and waiting time for processing changed the physical, chemical and sensorial characteristics of the wine. These changes were of different intensities depending on the crop, of the grape (Chardonnay and Merlot), the distance between the place of harvest and the winery, and the temperatures during transport and waiting time.