This work proposes wideband and broadband Planar Ultra-wideband Modular Antenna (PUMA) arrays designed to improve cost and reliability for high production volume commercial and military applications. The designs feature simplified PCB stack-ups with high dielectric constant (Dk) dimensionally stable materials to improve the manufacturing cost and yield. Additionally, the packages use ball grid array (BGA) interconnects, commonly used in digital electronics, for simple solder reflow integration with radio frequency (RF) electronics. While high Dk materials present practical manufacturing benefits, theoretical background will show how and why PUMA arrays lose frequency bandwidth and scan volume with high Dk materials. Further, a band limiting cavity mode will be shown to encroach into the frequency band of high Dk PUMA arrays due to a higher order common mode. PUMA arrays designed on several high Dk materials (Dk = {2.55, 3, 3.7}) will be presented to characterize this reduction in bandwidth. A wideband 7.25-31 GHz (4.3:1) PUMA array-on-package designed on Rogers RO4725JXR (Dk = 2.55) is presented with infinite array simulation results showing good active impedance match, port isolation and cross-polarization performance out to q = 45°. A simplified broadband 15-21 GHz (30%) PUMA array on a thin (λ/11) single layer of Isola FR408HR (Dk = 3.7) is proposed with infinite array results predicting strong active impedance, port isolation and cross-polarization performance with better port isolation and cross-polarization levels than a similar dual-polarized probe fed patch array.

Foram abordadas questões relacionadas com a temática da poluição atmosférica provocada pelo material particulado em suspensão. Dois ambientes foram selecionados para estudo: um ambiente de mineração e um ambiente urbano. Com o objetivo de obter uma avaliação preliminar da qualidade do ar nesses ambientes, foi realizado um programa de amostragem para cada área. Dois pontos básicos foram abordados nessa avaliação: a determinação da concentração de partículas totais em suspensão e a caracterização química e física do material particulado. A determinação das concentrações de partículas totais em suspensão foi obtida através do uso de amostradores de grande volume (Hi-vols). O método de referência utilizado foi o método do amostrador de grande volume proposto pela ABNT através da norma NBR 9547: 97. A caracterização física envolveu a determinação da distribuição granulométrica do material particulado em suspensão enquanto que a caracterização química compreendeu a determinação da sua composição. As técnicas analíticas utilizadas na caracterização do material particulado, foram a espectrometria de Fluorescência de Raios-X (XRF) para a caracterização química, e o Espalhamento de Luz Laser de Baixo Angulo (LALLS) para a caracterização física. Com relação às concentrações de partículas totais em suspensão, os resultados indicaram que as áreas de mineração apresentaram valores superiores aos encontrados na área urbana, inclusive com ultrapassagens dos padrões legais, fato este que não ocorreu na área urbana estudada. Para a distribuição granulométrica do material particulado, os resultados demonstraram que as frações mais finas do particulado apresentaram-se em maiores quantidades nas áreas de mineração, enquanto que as frações mais grosseiras apresentaram-se em maior quantidade na área urbana. Quanto à composição química do material particulado em suspensão, podemos concluir que para as áreas de mineração, esta foi muito semelhante à da rocha lavrada. / Atmospheric pollution aspects were analyzed. Two types of ambients were selected for study: a mining ambient and an urban ambient. To obtain a preliminary evaluation of the quality of the air in these ambients a sampling program was accomplished for each area. Two basic points were studied: the concentration of the total suspended particulates and the chemical and physical characterization of the particulate matter. The concentrations of total suspended particulates were obtained through the use of high volume samplers (Hi-vols). The reference method used was the high volume sampler method, proposed by ABNT through the norm NBR 9547: 97. The physical characterization involved the determination of the size distribution of the suspended particulate matter while the chemical characterization involved the determination of its composition. The analytic techniques used for the characterization of the particulate matter were the X-Ray Fluorescence (XRF) for the chemical characterization, and the Low Angle Laser Light Scattering (LALLS) for the physical characterization. Concentration levels for total suspended particulates showed that the mining areas presented higher values than those for urban area. Legal standards were exceeded in the mining area, fact that did not occur in the urban area. Size distributions of the particulate matter demonstrated that the finest fractions were found in larger amounts in the mining areas, while the coarses fractions were present in larger amounts in the urban area. The chemical compositions of the suspended particulate matter in the mining areas were very similar to the compositions of the rocks been mined.

Le choc septique est la première cause de mortalité en réanimation. Des techniques extracorporelles de purification sanguine sont aujourd’hui proposées pour améliorer le pronostic de cette pathologie. Leur mode d’action est basé sur l’immunomodulation de la réponse inflammatoire systémique de l’hôte, obtenue principalement par épuration nonsélective des médiateurs de l’inflammation. Nous rapportons les résultats de différentes études in vitro, animales et cliniques ayant évalué les techniques de purification sanguine suivantes :hémofiltration à haut débit, hémofiltration en cascade, hémofiltration hautement adsorbante,filtration et adsorption couplée, hémoadsorption, et hémodialyse à haute perméabilité.Ce travail de recherche translationnelle montre que les techniques de purification sanguine sont non seulement capables d’épurer les médiateurs de l’inflammation mais aussi l’endotoxine pour l’hémofiltration hautement adsorbante et l’hémoadsorption. Nous démontrons par ailleurs la faisabilité technique, la sécurité d’application et les intérêts del’hémofiltration en cascade et de l’hémodialyse continue à haute perméabilité. Les effets hémodynamiques bénéfiques des techniques de purification sanguine sont également retrouvés. Pour les années à venir, il conviendra d’optimiser les techniques les plus performantes en tenant compte de leurs avantages et inconvénients respectifs. Sur le planphysiopathologique, l’effet plus direct de ces thérapies sur les leucocytes sera à approfondir. Il semble maintenant admis que convection, diffusion et adsorption ne doivent plus être opposés mais plutôt être considérés comme des mécanismes complémentaires / Septic shock is the main cause of death in the intensive care unit. Extracorporeal blood purification therapies are now being proposed in order to improve septic shock outcomes. These therapies work based on immunomodulation of the host inflammatory response, obtained by non selectively removing inflammatory mediators. We report data from several different studies performed in vitro, in animals and in human beings, assessing various blood purification therapies which include high-volume hemofiltration, cascade hemofiltration, high-adsorption hemofiltration, coupled plasma filtration adsorption, hemoadsorption and high-permeability hemodialysis. This translational research work shows that blood purification therapies are capable of removing not only the inflammatory mediators but also the endotoxins as far as highadsorptionhemofiltration and hemoadsorption are concerned. We demonstrate technical feasibility, safety and advantages of cascade hemofiltration and continuous high-permeability hemodialysis. The beneficial hemodynamic effects related to these blood purification techniques are also highlighted. For future research, optimization of the most efficient techniques is warranted, takinginto account of their respective advantages and drawbacks. Regarding pathophysiology, the direct effect of these therapies on leukocyte function is subject to further investigation. To date, convection, diffusion and adsorption should not be viewed in opposition but rather, seen as complementary mechanisms.

Submitted by Bruna Rodrigues (bruna92rodrigues@yahoo.com.br) on 2016-09-15T20:31:27Z No. of bitstreams: 1 DissECA.pdf: 4704364 bytes, checksum: 1909457a146bdb29a74ad65130ca2bd9 (MD5) / Approved for entry into archive by Marina Freitas (marinapf@ufscar.br) on 2016-09-16T19:58:59Z (GMT) No. of bitstreams: 1 DissECA.pdf: 4704364 bytes, checksum: 1909457a146bdb29a74ad65130ca2bd9 (MD5) / Approved for entry into archive by Marina Freitas (marinapf@ufscar.br) on 2016-09-16T19:59:07Z (GMT) No. of bitstreams: 1 DissECA.pdf: 4704364 bytes, checksum: 1909457a146bdb29a74ad65130ca2bd9 (MD5) / Made available in DSpace on 2016-09-16T19:59:13Z (GMT). No. of bitstreams: 1 DissECA.pdf: 4704364 bytes, checksum: 1909457a146bdb29a74ad65130ca2bd9 (MD5) Previous issue date: 2015-03-27 / Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) / Coarse particulate matter with aerodynamic diameter smaller than 10μm (PM10) have long been considered as air pollutants associated with health issues. They penetrate into the upper respiratory tract, causing respiratory problems such as worsening of asthma. The aim of this study was to determine and quantify the distribution of chemical elements in the PM10 particulate matter present in the atmosphere of the city of Sao Carlos (Sao Paulo). Samples were collected daily for a period of 23h and 30 minutes, from April 16, 2014 to April 16, 2015. A high-volume sampler (AGV-PM10) with micro quartz and fiber glass filters were used. The filters were subjected to gravimetric analysis to obtain the mass of PM10 and were then analyzed by energy dispersive X-ray fluorescence and Laser Induced Breakdown Spectroscopy to identify and quantify the chemical composition of the samples. The highest average concentration during twelve-month period was 70.41μg/m³ (August, 2014) and the smallest was 22.59μg/m³ (January, 2015). The annual arithmetic average found for the twelve months period was 42.71μg/m³. If compared with annual arithmetic average limit of 40μg/m³, established by CETESB, the value is slightly above and below 50 μg/m³ (CONAMA). If we consider the limit established by the World Health Organization (WHO), which is 20μg/m³, this value is much higher than recommended. The chemicals elements found were characteristic of urban areas / O material particulado, cujo diâmetro aerodinâmico é menor do que 10μm vem sendo considerado como poluente atmosférico muito associado a questões de saúde, uma vez que são os que penetram em vias respiratórias, agravando problemas como o da asma, por exemplo. O objetivo deste trabalho foi avaliar os níveis de concentração de material particulado (MP10) e determinar a distribuição dos elementos químicos deste material particulado presente no ar atmosférico do centro da cidade de São Carlos (São Paulo). As amostras foram coletadas diariamente, por um período de 23h e 30 minutos, entre 16 de abril de 2014 a 16 de abril de 2015. Foi utilizado um amostrador de grandes volumes (AGV-MP10), submetendo os filtros, de fibra de vidro e de micro quartzo, à análise gravimétrica para obtenção de massa de MP10, Fluorescência de Raios-X de Energia Dispersiva de (EDX) e a Espectroscopia de ruptura induzida por laser (LIBS) para identificação e quantificação da composição química elementar das amostras. A maior concentração média do período de doze meses amostrado foi de 70,41μg/m³ em agosto/2014 e a menor de 22,59μg/m³ em janeiro/2015. A média aritmética anual encontrada para o período de doze meses foi de 42,71μg/m³. Se comparada com a média aritmética anual do limite estabelecido pela CETESB, de 40μg/m³, o valor está um pouco acima e um pouco abaixo de 50 μg/m³(CONAMA). Se for considerado o limite estabelecido pela Organização Mundial da Saúde (OMS), que é de 20 μg/m³, este valor encontra-se muito acima do recomendado. Os elementos químicos encontrados são característicos de áreas urbanas e apresentam resultados semelhantes a estudos anteriores na cidade.

Foram abordadas questões relacionadas com a temática da poluição atmosférica provocada pelo material particulado em suspensão. Dois ambientes foram selecionados para estudo: um ambiente de mineração e um ambiente urbano. Com o objetivo de obter uma avaliação preliminar da qualidade do ar nesses ambientes, foi realizado um programa de amostragem para cada área. Dois pontos básicos foram abordados nessa avaliação: a determinação da concentração de partículas totais em suspensão e a caracterização química e física do material particulado. A determinação das concentrações de partículas totais em suspensão foi obtida através do uso de amostradores de grande volume (Hi-vols). O método de referência utilizado foi o método do amostrador de grande volume proposto pela ABNT através da norma NBR 9547: 97. A caracterização física envolveu a determinação da distribuição granulométrica do material particulado em suspensão enquanto que a caracterização química compreendeu a determinação da sua composição. As técnicas analíticas utilizadas na caracterização do material particulado, foram a espectrometria de Fluorescência de Raios-X (XRF) para a caracterização química, e o Espalhamento de Luz Laser de Baixo Angulo (LALLS) para a caracterização física. Com relação às concentrações de partículas totais em suspensão, os resultados indicaram que as áreas de mineração apresentaram valores superiores aos encontrados na área urbana, inclusive com ultrapassagens dos padrões legais, fato este que não ocorreu na área urbana estudada. Para a distribuição granulométrica do material particulado, os resultados demonstraram que as frações mais finas do particulado apresentaram-se em maiores quantidades nas áreas de mineração, enquanto que as frações mais grosseiras apresentaram-se em maior quantidade na área urbana. Quanto à composição química do material particulado em suspensão, podemos concluir que para as áreas de mineração, esta foi muito semelhante à da rocha lavrada. / Atmospheric pollution aspects were analyzed. Two types of ambients were selected for study: a mining ambient and an urban ambient. To obtain a preliminary evaluation of the quality of the air in these ambients a sampling program was accomplished for each area. Two basic points were studied: the concentration of the total suspended particulates and the chemical and physical characterization of the particulate matter. The concentrations of total suspended particulates were obtained through the use of high volume samplers (Hi-vols). The reference method used was the high volume sampler method, proposed by ABNT through the norm NBR 9547: 97. The physical characterization involved the determination of the size distribution of the suspended particulate matter while the chemical characterization involved the determination of its composition. The analytic techniques used for the characterization of the particulate matter were the X-Ray Fluorescence (XRF) for the chemical characterization, and the Low Angle Laser Light Scattering (LALLS) for the physical characterization. Concentration levels for total suspended particulates showed that the mining areas presented higher values than those for urban area. Legal standards were exceeded in the mining area, fact that did not occur in the urban area. Size distributions of the particulate matter demonstrated that the finest fractions were found in larger amounts in the mining areas, while the coarses fractions were present in larger amounts in the urban area. The chemical compositions of the suspended particulate matter in the mining areas were very similar to the compositions of the rocks been mined.

This diploma thesis deals with the study of high-strength, high-volume fly ash concrete. The theoretical part of this thesis focuses on the detailed characteristic and main principles of high-strength concrete, high-volume fly ash concrete. In addition, according to the findings, the technology of high-strength and high-volume fly ash concrete, including principles of high strength, has been described. On the basis of the findings, high-strength, high-volume fly ash concrete for specific compressive strengths has been designed and created in the experimental section. These concretes were then subjected to a number of tests.

This thesis contains two main parts: theoretical and experimental. The theoretical part deals with summarization knowledge of high-volume fly ash (HVFA) concretes. Among others, there are mentioned processes of producing of fly ash, characteristic features and resistance to aggressive environments of HVFA concretes. The theoretical part ends with a suitable example of practical application. In the practical part were tested properties of nine different mixtures containing 40%, 50% and 60% replacement by weight of the cement by fly ash. They were compared with the reference mixtures without fly ash addition. The main endpoints were long-term compressive strength, resistance to aggressive environments, the influence of fly ash on consistency, hydratation temperatures, water absorption and volume changes.

Metabolic syndrome (MS) and end-stage renal disease (ESRD) represent two clinical- pathologic states with increased risk of atherosclerotic cardiovascular complications with considerable impact on the quality of life of the patients. The knowledge about the changes in distribution of individual lipoprotein subfractions could countribute to the estimation of risk of atherosclerosis development. The studies presented in this thesis aimed at analyses of subfractions of LDL and HDL in the abovementioned pathologic states; moreover, we tried to elucidate the associations of changes in lipoprotein subfractions with clinical as well as biochemical alterations. The Study I was a placebo controlled study observing the effect of polyunsaturated fatty acids of n-3 family (PUFA n-3) administration to patients with MS who were divided to statin-treated ones (36 patients), and those without statin therapy (24 probands). The Study II comprised of 57 patients with ESRD on high volume haemodiafiltration (HV-HDF). In this Study, the parameters after 5-year follow-up were compared with baseline characteristics. Also, we included comparisons with the control group of 50 age and sex matched patients without the signs of ESRD. In Study I, we observed lowering of triacylglycerol and cholesterol content in VLDL...

No description available.

La thermographie infrarouge est une méthode largement employée pour la caractérisation des propriétés thermophysiques des matériaux. L’avènement des diodes laser pratiques, peu onéreuses et aux multiples caractéristiques, étendent les possibilités métrologiques des caméras infrarouges et mettent à disposition un ensemble de nouveaux outils puissants pour la caractérisation thermique et le contrôle non desturctif. Cependant, un lot de nouvelles difficultés doit être surmonté, comme le traitement d’une grande quantité de données bruitées et la faible sensibilité de ces données aux paramètres recherchés. Cela oblige de revisiter les méthodes de traitement du signal existantes, d’adopter de nouveaux outils mathématiques sophistiqués pour la compression de données et le traitement d’informations pertinentes. Les nouvelles stratégies consistent à utiliser des transformations orthogonales du signal comme outils de compression préalable de données, de réduction et maîtrise du bruit de mesure. L’analyse de sensibilité, basée sur l’étude locale des corrélations entre les dérivées partielles du signal expérimental, complète ces nouvelles approches. L'analogie avec la théorie dans l'espace de Fourier a permis d'apporter de nouveaux éléments de réponse pour mieux cerner la «physique» des approches modales.La réponse au point source impulsionnel a été revisitée de manière numérique et expérimentale. En utilisant la séparabilité des champs de température nous avons proposé une nouvelle méthode d'inversion basée sur une double décomposition en valeurs singulières du signal expérimental. Cette méthode par rapport aux précédentes, permet de tenir compte de la diffusion bi ou tridimensionnelle et offre ainsi une meilleure exploitation du contenu spatial des images infrarouges. Des exemples numériques et expérimentaux nous ont permis de valider dans une première approche cette nouvelle méthode d'estimation pour la caractérisation de diffusivités thermiques longitudinales. Des applications dans le domaine du contrôle non destructif des matériaux sont également proposées. Une ancienne problématique qui consiste à retrouver les champs de température initiaux à partir de données bruitées a été abordée sous un nouveau jour. La nécessité de connaitre les diffusivités thermiques du matériau orthotrope et la prise en compte des transferts souvent tridimensionnels sont complexes à gérer. L'application de la double décomposition en valeurs singulières a permis d'obtenir des résultats intéressants compte tenu de la simplicité de la méthode. En effet, les méthodes modales sont basées sur des approches statistiques de traitement d'une grande quantité de données, censément plus robustes quant au bruit de mesure, comme cela a pu être observé. / Infrared thermography is a widely used method for characterization of thermophysical properties of materials. The advent of the laser diodes, which are handy, inexpensive, with a broad spectrum of characteristics, extend metrological possibilities of infrared cameras and provide a combination of new powerful tools for thermal characterization and non destructive evaluation. However, this new dynamic has also brought numerous difficulties that must be overcome, such as high volume noisy data processing and low sensitivity to estimated parameters of such data. This requires revisiting the existing methods of signal processing, adopting new sophisticated mathematical tools for data compression and processing of relevant information.New strategies consist in using orthogonal transforms of the signal as a prior data compression tools, which allow noise reduction and control over it. Correlation analysis, based on the local cerrelation study between partial derivatives of the experimental signal, completes these new strategies. A theoretical analogy in Fourier space has been performed in order to better understand the «physical» meaning of modal approaches.The response to the instantaneous point source of heat, has been revisited both numerically and experimentally. By using separable temperature fields, a new inversion technique based on a double singular value decomposition of experimental signal has been introduced. In comparison with previous methods, it takes into account two or three-dimensional heat diffusion and therefore offers a better exploitation of the spatial content of infrared images. Numerical and experimental examples have allowed us to validate in the first approach our new estimation method of longitudinal thermal diffusivities. Non destructive testing applications based on the new technique have also been introduced.An old issue, which consists in determining the initial temperature field from noisy data, has been approached in a new light. The necessity to know the thermal diffusivities of an orthotropic medium and the need to take into account often three-dimensional heat transfer, are complicated issues. The implementation of the double singular value decomposition allowed us to achieve interesting results according to its ease of use. Indeed, modal approaches are statistical methods based on high volume data processing, supposedly robust as to the measurement noise.