Multiple problems caused by urban runoff have emerged as a consequence to the continuing development of urban areas in recent decades. The increase of impervious land areas can significantly alter watershed hydrology and water quality. Typical impacts to downstream hydrologic regimes include higher peak flows and runoff volumes, shorter concentration times, and reduced infiltration. Urban runoff increases the transport of pollutants and nutrients and thus degrades water bodies adjacent to urban areas. One of the most frequently used practices to restore the hydrology and water quality of urban watersheds is bioretention (also known as a rain garden). Despite its wide applicability, an understanding of its multiple physiochemical and biological treatment processes remains an active research area. To provide a wide ability to evaluate the hydrologic input to bioretention systems, spatial and temporal distribution of storm events in Virginia were studied. Results generated from long-term frequency analysis of 60-year precipitation data demonstrate that the 90 percentile, or 10-year return period rainfall depth and dry duration in Virginia are between 22.9 – 35.6 mm and 15.3 – 25.8 days, respectively. Monte-Carlo simulations demonstrated that sampling programs applied in different regions would likely encounter more than 30% of precipitation events less than 2.54 mm, and 10% over 25.4 mm. Further experimental research was conducted to evaluate bioretention recipes for retaining stormwater nitrogen (N) and phosphorus (P). A mesocosm experiment was performed to simulate bioretention facilities with 3 different bioretention blends as media layers with underdrain pipes for leachate collection. A control group with 3 duplicates for each media was compared with a replicated vegetated group. Field measurement of dissolved oxygen (DO), oxidation-reduction potential (ORP), pH, and total dissolved solids (TDS) was combined with laboratory analyses of total suspended solids (TSS), nitrate (NO3), ammonium (NH4), phosphate (PO4), total Kjeldahl nitrogen (TKN) and total phosphorus (TP) to evaluate the nutrient removal efficacies of these blends. Physicochemical measurements for property parameters were performed to determine characteristics of blends. Isotherm experiments to examine P adsorption were also conducted to provide supplementary data for evaluation of bioretention media blends. The results show that the blend with water treatment residuals (WTR) removed >90% P from influent, and its effluent had the least TDS / TSS. Another blend with mulch-free compost retained the most (50 – 75%) total nitrogen (TN), and had the smallest DO / ORP values, which appears to promote denitrification under anaerobic conditions. Increase of hydraulic retention time (HRT) to 6 h could influence DO, ORP, TKN, and TN positively. Plant health should also be considered as part of a compromise mix that sustains vegetation. Two-way analysis of variance (ANOVA) found that single and interaction effects of HRT and plants existed, and could affect water quality parameters of mesocosm leachate. Based upon the understanding of the physiochemical and hydrologic conditions mentioned previously, a design model of a bioretention system became the next logical step. The computational model was developed within the Matlab® programming environment to describe the hydraulic performance and nutrient removal of a bioretention system. The model comprises a main function and multiple subroutines for hydraulics and treatment computations. Evapotranspiration (ET), inflow, infiltration, and outflow were calculated for hydrologic quantitation. Biomass accumulation, nitrogen cycle and phosphorus fate within bioretention systems were also computed on basis of the hydrologic outputs. The model was calibrated with the observed flow and water quality data from a field-scale bioretention in Blacksburg, VA. The calibrated model is capable of providing quantitative estimates on flow pattern and nutrient removal that agree with the observed data. Sensitivity analyses determined the major factors affecting discharge were: watershed width and roughness for inflow; pipe head and diameter for outflow. Nutrient concentrations in inflow are very influential to outflow quality. A long-term simulation demonstrates that the model can be used to estimate bioretention performance and evaluate its impact on the surrounding environment. This research advances the current understanding of bioretention systems in a systematic way, from hydrologic behavior, monitoring, design criteria, physiochemical performance, and computational modeling. The computational model, combined with the results from precipitation frequency analysis and evaluation of bioretention blends, can be used to improve the operation, maintenance, and design of bioretention facilities in practical applications. / Ph. D.

The process of froth flotation relies on using air bubbles to collect desired mineral particles dispersed in aqueous media on the surface, while leaving undesirous mineral particles behind. For a particle to be collected on the surface of a bubble, the thin liquid films (or wetting films) of water formed in between must rupture. According to the Frumkin-Derjaguin isotherm, it is necessary that wetting films can rupture when the disjoining pressures are negative. However, the negative disjoining pressures are difficult to measure due to the instability and short lifetimes of the films. In the present work, two new methods of determining negative disjoining pressures have been developed. One is to use the modified thin film pressure balance (TFPB) technique, and the other is to directly determine the interaction forces using the force apparatus for deformable surfaces (FADS) developed in the present work. The former is designed to obtain spatiotemporal profiles of unstable wetting films by recording the optical interference patterns. The kinetic information derived from the spatiotemporal profiles were then used to determine the disjoining pressures using an analytical expression derived in the present work on the basis of the Reynolds lubrication theory. The technique has been used to study the effects of surface hydrophobicity, electrolyte (Al3+ ions) concentration, and bubble size on the stability of wetting films. Further, the geometric mean combining rule has been tested to see if the disjoining pressures of the wetting films can be predicted from the disjoining pressures of the colloid films formed between two hydrophobic surfaces and the disjoining pressures of the foam films formed between two air bubbles. The FADS is capable of directly measuring the interaction forces between air bubble and solid surface, and simultaneously monitoring the bubble deformation. The results were analyzed using the Reynolds lubrication theory and the extended DLVO theory to determine both the hydrodynamic and disjoining pressures. The FADS was used to study the effects of surface hydrophobicity and approach speeds. The results show that hydrophobic force is the major driving force for the bubble-particle interactions occurring in flotation. / Ph. D.

Sediment is a major source of water quality impairment in streams, rivers and lakes in the US. However, sediment fate and transport in small streams is poorly understood. Previous attempts to characterize sediment transport often insufficiently represented the physical and chemical sediment properties and lacked spatial and/or temporal resolution. Therefore, there is a need to develop better sediment tracers, for which rare earth element (REE)-labeled sediment is examined as an alternative. The objectives of this study were to: 1) assess the adsorption of REEs to natural soils and ensure their reliability as a tracer in a fluvial environment; and 2) evaluate the efficacy of utilizing REE-labeled sediment to quantify fate and transport in a second-order stream during a series of storm events. Two natural stream bank soils from Stroubles Creek in Virginia were labeled with the REEs lanthanum and ytterbium. The REEs adsorbed equally to both soils and had minimal desorption after several washes with stream water. This suggests that REEs form a dependable natural sediment tracer and sufficiently label natural soils for use in a sediment tracing study. During two storm events, two unique REE tracers were injected into Stroubles Creek. These tracers were detected at varying discharges and sediment loads in bed and suspended sediment samples up to 875 m downstream. REE tracers proved to be an ideal tracer for detecting sediment fate and transport in a small stream during a series of storm events and hold great potential for evaluating best management practices and sediment transport models. / Master of Science

The results of this study show that novel mesoporous carbons were obtained as inverse replica of SBA-15, HMS and MCM-41 silica templates, with a large pore diameter (2-4 nm), a BET surface area of 1867, 874 and 910 m2g –1 respectively for CA_SBA-15_LPG_105, CA_HMS_LPG_80 and CA_MCM- 41_LPG_80 with bimodal pore size distribution (PSD) in the mesopores range. The results obtained show that mesoporous carbon with graphitic structures can be synthesized via the LPG route.

The results of this study show that novel mesoporous carbons were obtained as inverse replica of SBA-15, HMS and MCM-41 silica templates, with a large pore diameter (2-4 nm), a BET surface area of 1867, 874 and 910 m2g –1 respectively for CA_SBA-15_LPG_105, CA_HMS_LPG_80 and CA_MCM- 41_LPG_80 with bimodal pore size distribution (PSD) in the mesopores range. The results obtained show that mesoporous carbon with graphitic structures can be synthesized via the LPG route.

Philosophiae Doctor - PhD / The results of this study show that novel mesoporous carbons were obtained as inverse replica of SBA-15, HMS and MCM-41 silica templates, with a large pore diameter (2-4 nm), a BET surface area of 1867, 874 and 910 m2g–1 respectively for CA_SBA-15_LPG_105, CA_HMS_LPG_80 and CA_MCM- 41_LPG_80 with bimodal pore size distribution (PSD) in the mesopores range. The results obtained show that mesoporous carbon with graphitic structures can be synthesized via the LPG route. / South Africa

Poly-γ-glutamic acid (γ-PGA) is a biopolymer made up of repeating units of L-glutamic acid, D-glutamic acid or both. γ-PGA is water soluble, non-toxic and biodegradable, and can be used safely in a variety of applications that are increasing rapidly. This study investigated the production of HMW γ-PGA by five Bacillus species (B. licheniformis 1525, B. licheniformis NCTC 6816, B. licheniformis ATCC 9945a, B. licheniformis ATCC 9945a and B. subtilis (natto) ATCC 15245) in GS, C and E media for the removal of heavy metals in wastewaters. The highest γ-PGA yields of 11.69 g/l and 11.59 g/l were produced by Bacillus subtilis (natto) ATCC 15245 in GS medium and medium C respectively. Upon characterization, γ- PGAs with different properties (crystallinity, acid/salt form and molecular weights ranging from 2.56 × 105 Da to 1.65 × 106 Da) were produced. The water soluble, non-toxic, HMW (Mw 1.65 × 106 Da) γ-PGA produced by B. subtilis (natto) ATCC 15245 in medium C was investigated as a sorbent for the removal of heavy metal ions including Cu2+, Zn2+, Ni2+, Cd2+ and Ag+. The results showed that the removal of metals by γ-PGA was more dependent on the concentration of γ-PGA than the solution pH. The highest metal ions removal of 93.50%, 88.13%, 90.21%, 90.56% and 86.34% by HMW γ-PGA were obtained for Cu2+, Zn2+, Ni2+, Cd2+ and Ag+ respectively. The presence of interfering metal ions could hinder the adsorption of individual metal ions by γ-PGA. The affinities of heavy metal ions for γ-PGA followed the order: Cu2+ > Zn2+ > Ni2+ > Cd2+. The effect of molecular weight of γ-PGA on metal removal was also investigated, and it was found that metal ion adsorption capacity of γ-PGA strongly depended on its molecular weight. The maximum amount (93.50%) of Cu2+ sorbed by HMW γ-PGA was higher compared to that (59.48%) sorbed by LMW γ-PGA. Isotherm models showed that the Redlich-Peterson best described the metal adsorption capacity of γ-PGA. It was also found that a multisite adsorption mechanism occurred via the complexation of metal ions with the free α-carboxyl and possibly the amide functional groups in γ-PGA.

Submitted by Douglas dos Santos (santosdouglas@bol.com.br) on 2017-02-14T16:15:07Z No. of bitstreams: 1 DOUGLAS SANTOS.pdf: 21576460 bytes, checksum: bffe3cdab84e078db037d13093fdd016 (MD5) / Approved for entry into archive by LUIZA DE MENEZES ROMANETTO (luizamenezes@reitoria.unesp.br) on 2017-02-16T15:17:57Z (GMT) No. of bitstreams: 1 santos_d_dr_guara.pdf: 21576460 bytes, checksum: bffe3cdab84e078db037d13093fdd016 (MD5) / Made available in DSpace on 2017-02-16T15:17:57Z (GMT). No. of bitstreams: 1 santos_d_dr_guara.pdf: 21576460 bytes, checksum: bffe3cdab84e078db037d13093fdd016 (MD5) Previous issue date: 2016-12-19 / O aço 300M surgiu como uma melhoria do aço de alta resistência SAE 4340, este foi desenvolvido para adquirir melhor tenacidade e soldabilidade em aplicações que exigem melhores propriedades mecânicas, foram feitas pequenas alterações nos elementos de liga como a adição de vanádio e elevação no teor de silício. Este trabalho realizou tratamentos de superfície de nitretação a Plasma e de carbonetação a Laser na superfície de um aço 300M com estrutura bainítica. A microestrutura bainítica foi obtida por resfriamento isotérmico na temperatura de 300°C durante 60 minutos, a partir da região de austenitização, elevando a dureza de 380 para 474 HV. O tratamento de superfície de carbonetação, utilizando um laser de CO2 de baixa potência (125 W) utilizou como revestimento negro de fumo, com objetivo de adicionar carbono e criar uma camada protetora. O tratamento de superfície por nitretação a plasma ocorreu na temperatura de 500ºC durante 3 horas, em uma atmosfera com mistura de gases N2 e H2. As amostras foram caracterizadas por microscopia óptica. Foram analisadas as espessuras da camada de compostos formada na superfície, em torno de 20 μm, e da zona termicamente afetada pelo calor (ZTA), em torno de 45 μm, para tratamento a laser. Pelo tratamento de nitretação, a camada formada na superfície do aço, apresentou uma região branca com aproximadamente 3 μm e uma camada de difusão atômica endurecida com cerca de 20 μm. As propriedades mecânicas foram avaliadas por meio de ensaios de tração e fadiga uniaxial. Os resultados mostraram que o comportamento mecânico em tração foi fortemente afetado pela microestrutura bainítica, aumentando os níveis do limite de escoamento e de resistência. Estas propriedades em tracão não foram afetadas pelos tratamentos de superfície. No desempenho da vida em fadiga, o tratamento de superfície a plasma apresentou melhor comportamento, melhorando significativamente as propriedades em fadiga. / 300M steel was developed from high-strength steel SAE 4340, the goal of this improvement was get better toughness and weldability in applications requiring improved mechanical properties; with small changes in alloy elements, addition of vanadium and especially the silicon content. This work uses low-power laser CO2 (125 W) for introducing carbon into the surface of 300M steel with bainitic structure. The bainitic microstructure was obtained by isothermal cooling at 300 °C for 60 minutes after austenitizing at 850 ºC for 30 minutes; this heat treatment increased the hardness of 360 HV for 474 HV. The CO2 laser parameters as resolution and power were kept constant and the speed is varied. It was used as carbon black coating to better the absorption of light laser. Treatment plasma nitriding surface was at a temperature of 500° C for 3 hours in atmosphere having a gas mixture N2 e H2. The samples were characterized by optical microscopy. They were analyzed thicknesses of the layers formed on the surface around 20 μm, and the heat affected zone (HAZ) about 45 μm, for laser treatment. To nitriding treatment, the layer formed on the surface of the steel showed a white area of approximately 3 μm and 20 μm near HAZ. The mechanical properties were analyzed using tensile and fatigue tests. The results showed that the mechanical properties in tensile tests was strongly affected by the bainitic microstructure. The steel that received the nitriding surface plasma treatment showed better fatigue behavior.

Made available in DSpace on 2014-12-17T15:42:26Z (GMT). No. of bitstreams: 1 WaldeniceAM.pdf: 1082421 bytes, checksum: bd7f6b4a35f59108d7807a3a68e163a3 (MD5) Previous issue date: 2007-03-27 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / Textile activity results in effluents with a variety of dyes. Among the several processes for dye-uptaking from these wastewaters, sorption is one of the most effective methods, chitosan being a very promising alternative for this end. The sorption of Methyl Orange by chitosan crosslinked particles was approached using equilibrium and kinetic analyses at different pH s. Besides the standard pseudo-order analysis normally effectuated (i.e. pseudo-first-order and pseudo-second-order), a novel approach involving a pseudo-nth-order kinetics was used, nbeing determined via non-linear regression, using the Levenberg-Marquardt method. Zeta potential measurements indicated that electrostatic interactions were important for the sorption process. Regarding equilibrium experiments, data were well fitted to a hybrid Langmuir-Freundlich isotherm, and estimated Gibbs free energy of adsorption as a function of mass of dye per area of chitosan showed that the process of adsorption becomes more homogeneous as the pH of the continuous phase decreased. Considering the kinetics of sorption, although a pseudo-nth-order description yielded good fits, a kinetic equation involving diffusion adsorption phenomena was found to be more consistent in terms of a physicochemical description of the sorption process / A atividade t?xtil resulta em efluentes com uma variedade de corantes. Dentre os v?rios processos para a remo??o de corantes destes efluentes, o de sor??o constitui um dos m?todos mais efetivos, sendo a quitosana um sorvente alternativo bastante promissor para este fim. A sor??o do corante alaranjado de metila em part?culas de quitosana reticulada foi avaliada atrav?s de estudos de equil?brio e cin?tica de sor??o em diferentes pHs. Al?m da an?lise com o modelo de pseudo-ordem normalmente adotado na literatura (por exemplo, pseudo-primeira-ordem e pseudo-segunda-ordem), um novo modelo envolvendo uma cin?tica de pseudo-n-ordem foi usada, sendo ndeterminado via regress?o n?o-linear, usando o m?todo de Levenberg-Marquardt. Medidas de potencial zeta indicaram intera??es eletrost?ticas importantes no processo de sor??o. Com rela??o aos estudos de equil?brio, os dados foram bem representados pela isoterma h?brida Langmuir-Freundlich, e a energia livre de Gibbs de sor??o como uma fun??o da massa de corante por ?rea de part?cula mostrou que este processo torna-se mais homog?neo ? medida que o pH da fase cont?nua diminui. Considerando a cin?tica de sor??o, apesar do modelo de pseudo-n-ordem descrever bem os dados experimentais, a equa??o cin?tica envolvendo difus?o-adsor??o foi mais consistente em termos de descri??o f?sico-qu?mica do processo de sor??o

Selenium (Se) is a trace element essential to the nutrition of animals. On the other hand, in a narrow concentration range, Se can cause toxicity. The presence of Se in food is related to the concentration of the element in soil. Thus, the knowledge of the Se amount and its behavior in soil are very important to the better manage the environment and to prevent toxicological problems and human deficiency. The objectives of this study were: (i) to quantify the natural content of Se in some Brazilian soils and correlates them with soil attributes; (ii) to evaluate the adsorption of selenite and selenate as a function of pH and Se concentration in tropical soils; (iii) to adjust the constant capacitance model to describe the Se adsorption in tropical soil as compared to empiric models. Se concentrations ranged from <0.08 to 1.61 mg kg-1, with a mean of 0.19 mg kg-1. Concentrations of Se in the samples collected in the superficial layers were positively correlated to cationic exchange capacity, as well as to clay, organic matter and oxide contents of the soils. In the subsurface samples, only pH and aluminum oxide content were correlated with Se concentrations. Most samples with the highest Se concentrations were derived from sedimentary parent material. Se(IV) adsorption was high for all soils, decreased with increasing pH and was strongly correlated to organic matter and Fe and Al oxides contents. On the other hand, Se(VI) adsorption was very low at pH values commonly found in agricultural soils, except for the highly weathered Rhodic Acrudox which was positively correlated with the gibbsite content. The constant capacitance model fit the Se(IV) and Se(VI) adsorption data well, and was similar to Langmuir and Freundlich empirical models. Optimizations of mono and bidentate complexation and surface protonation constant were used for the Se(IV) adsorption data. For Se(VI), optimizations for the two monodentate species were employed. / O selênio (Se) é um elemento traço essencial a nutrição animal. Por outro lado, o limiar de concentração entre suficiente e tóxico é estreito. A presença de Se nos alimentos está relacionada à sua concentração no solo. Deste modo, conhecer a quantidade e o comportamento do Se no solo é muito importante para um correto manejo ambiental, previnindo problemas toxicológicos e deficiência em humanos. Os objetivos deste estudo foram: (i) quantificar os conteúdos naturais de Se em solos brasileiros e correlacioná-los com seus atributos; (ii) avaliar a adsorção de selenito e selenato em função da variação do pH e da concentração de Se em solos tropicais; (iii) ajustar o modelo de capacitancia constante para descrever a adsorção de Se em solos tropicais comparado a modelos empíricos. As concentrações de Se variaram de <0,08 - 1,61 mg kg-1, com média de 0,19 mg kg-1. As concentrações de Se nas amostras coletadas nas camadas superficiais do solo foram positivamente correlacionadas com a capacidade de troca catiônica, bem como os teores de argila, matéria orgânica e óxidos de Fe e Al do solos. Nas amostras subsuperficiais, apenas pH e teor de óxido de alumínio foram correlacionadas com as concentrações de Se. A maioria das amostras com maiores concentrações de selênio foram provenientes de material de origem sedimentar. A adsorção de Se(IV) foi elevada para todos os solos, diminuiu com o aumento do pH e foi fortemente correlacionada com teores de matéria orgânica e de óxidos de Fe e de Al. Por outro lado, a adsorção de Se(VI) foi muito baixa em valores de pH normalmente encontrados em solos agrícolas, excepto para o Latossolo Vermelho acriférrico, que foi positivamente correlacionada com o teor de gibbsita dos solos. O modelo de capacitância constante ajustou-se bem aos resultados de adsorção Se(IV) e Se(VI), com ajuste similar aos modelos empíricos de Langmuir e de Freundlich. Para os resultados de adsorção de Se(IV) foram utilizadas otimizações das constantes de complexação mono e bidentadas e da constante de protonação de superfície. Para Se(VI), foram empregadas otimizações para as duas espécies de monodentadas.