We employ a variant of optical absorption spectroscopy, namely in situ differential reflectance spectroscopy (DRS), for an analysis of the structure-properties relations of thin epitaxial organic films. Clear correlations between the spectra and the differently intense coupling to the respective substrates are found. While rather broad and almost structureless spectra are obtained for a quaterrylene (QT) monolayer on Au(111), the spectral shape resembles that of isolated molecules when QT is grown on graphite. We even achieve an efficient electronic decoupling from the subjacent Au(111) by inserting an atomically thin organic spacer layer consisting of hexa-peri-hexabenzocoronene (HBC) with a noticeably dissimilar electronic behavior. These observations are further consolidated by a systematic variation of the metal substrate (Au, Ag, and Al), ranging from inert to rather reactive. For this purpose, 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) is chosen to ensure comparability of the molecular film structures on the different metals, and also because its electronic alignment on various metal surfaces has previously been studied with great intensity. We present evidence for ionized PTCDA at several interfaces and propose the charge transfer to be related to the electronic level alignment governed by interface dipole formation on the respective metals. / Zur Analyse der Struktur-Eigenschafts-Beziehungen dünner, epitaktischer Molekülfilme wird in situ differentielle Reflexionsspektroskopie (DRS) als Variante der optischen Absorptionsspektroskopie verwendet. Klare Zusammenhänge zwischen den Spektren und der unterschiedlich starken Kopplung zum jeweiligen Substrat werden gefunden. Während man breite und beinahe unstrukturierte Spektren für eine Quaterrylen (QT) Monolage auf Au(111) erhält, ist die spektrale Form von auf Graphit abgeschiedenem QT ähnlich der isolierter Moleküle. Durch Einfügen einer atomar dünnen organischen Zwischenschicht bestehend aus Hexa-peri-hexabenzocoronen (HBC) mit einem deutlich unterschiedlichen elektronischen Verhalten gelingt sogar eine effiziente elektronische Entkopplung vom darunter liegenden Au(111). Diese Ergebnisse werden durch systematische Variation der Metallsubstrate (Au, Ag und Al), welche von inert bis sehr reaktiv reichen, untermauert. Zu diesem Zweck wird 3,4,9,10-Perylentetracarbonsäuredianhydrid (PTCDA) gewählt, um Vergleichbarkeit der molekularen Filmstrukturen zu gewährleisten, und weil dessen elektronische Anordnung auf verschiedenen Metalloberflächen bereits eingehend untersucht worden ist. Wir weisen ionisiertes PTCDA an einigen dieser Grenzflächen nach und schlagen vor, dass der Ladungsübergang mit der elektronischen Niveauanpassung zusammenhängt, welche mit der Ausbildung von Grenzflächendipolen auf den entsprechenden Metallen einhergeht.

Spin-polarized electron beam has not yet been produced from an unpolarized electron beam using Stern-Gerlach type spin filter, because of the Lorentz force and Heisenberg uncertainty principle. At present, electron spin detectors and filters work on the basis of spin-dependent scattering of an electron beam from crystal surfaces. Single channel efficiencies of all the spin detectors for electrons are orders of magnitudes lower than the ideal one. Specular reflection type spin-polarized low energy electron diffraction (SPLEED)-spin detectors are having higher single channel efficiencies compared to the conventional Mott detectors. Moreover, multichannel detection can be realized from specular reflection type SPLEED-spin detectors. They have higher effective efficiency than the ideal spin detector. In order to develop specular reflection type spin filter, it is important to develop a spin-polarized low energy electron diffraction system. In addition, SPLEED system allows us to study the spin-orbit and exchange scattering at crystal surfaces. The general direction of the thesis has been the development of spin-polarized low energy electron diffraction (SPLEED) system. This system has been used to investigate the spin-orbit interactions on Ir(100) surface and exchange interactions of Fe grown on Ir(100). The thesis is organized into chapters as follows. Chapter 1 introduce the reader to some of the basic concepts of polarized electrons and the evolution of spin-polarized electron sources and detectors. Sources of polarized electrons are discussed with emphasis on photocathodes such as GaAs and strained GaAs. Widely used spin detector is the Mott detector which works in the higher energy range. The working principle of the Mott detector is discussed. Commonly used spin detector in the lower energy range is the LEED detector. The concept of the LEED detector is also discussed. Working principle and recent developments of specular reflection type SPLEED spin filters are introduced. Evolution of electron spin detector is discussed towards the end of the chapter. Chapter 2 discusses about the two instruments designed and developed during the course of the thesis. The first one is a spin-polarized low energy electron diffraction system working in the reflected electron pulse counting mode in UHV. This system is capable of measuring spin asymmetries due to spin-orbit interaction and exchange interaction. This instrument is useful in understanding structure and magnetism at surfaces as well as helps to develop new spin polarimeter based on SPLEED by evaluating spin asymmetries from different surfaces. All instruments connected to SPLEED system, measurement protocol and controlling software are discussed with some details. Along with this, standard characterization tools such as X-ray diffraction and magneto-optic Kerr effect measurements are discussed. The second instrument is a novel quadratic magneto-optic Kerr effect measurement system using permanent magnets, which is simple, compact and cost-effective. We have used rotating field method to extract QMOKE component in saturation. So there is no need for precise real-time measurement of magnitude and direction of the magnetic field as in the case of vector magnet. This instrument can easily quantify QMOKE coefficients for ferrimagnetic and ferromagnetic thin films and single crystals. Chapter 3 discusses SPLEED experiments carried out on Ir(100)-(1×5)-Hex and Ir(100)-(1×2+2×1)-O surfaces. The surface structure and surface preparation techniques are discussed. The stability of the Ir(100)-(1×5)-Hex surface is evaluated by monitoring the spin asymmetry as the function of time. Within 25 hours after the surface preparation, the profile of the spin asymmetry and the reflected electron count for Ir(100)-(1×5)-Hex surface resembles that of hydrogen adsorbed Ir(100)-(1×5)-H surface. The electron energy-angle of incidence landscape of reflectivity, spin asymmetry and figure of merit are recorded for Ir(100)-(1×2+2×1)-O surface. Many wide regions with a large figure of merit are identified in the E- landscape. Chapter 4 reports SPLEED experiments carried out on Ir(100)-(1×5)-H surface. The comparison between asymmetries evaluated for the Ir(100)-(1×5)-Hex surface after 25 hours and Ir(100)-(1×5)-H surface suggests that Ir(100)-(1×5)-Hex surface is transforming to Ir(100)-(1×5)-H surface, in 25 hours. This can be due to the adsorption of more than four Langmuir of residual hydrogen during this time. The energy-angle landscape of reflectivity, asymmetry and figure of merit are recorded for Ir(100)-(1×5)-H surface in an energy range 20 eV to 100 eV and angle range 10 to 60 . Many regions are identified as the working point for specular reflection type spin filter based on SPLEED. The surface structure and surface preparation techniques are discussed. The stability of the surface is also evaluated. Chapter 5 investigates the growth and magnetic properties of Fe(100) film on Ir(100)-(1×1), Ir(100)-(1×5)-Hex and Ir(100)-(1×2+2×1)-O surfaces. LEED, MEED, LMOKE and QMOKE studies were presented. The growth is found to be layer-by-layer at least up to 20 monolayers (ML) at room temperature. At higher deposition temperature, the MEED oscillations disappear around 3-5 ML. Magnetic anisotropy of the Fe(100) film grown on Ir(100)-(1×2+2×1)-O surfaces is evaluated using LMOKE measurement using Kerr microscope. Simultaneous in-situ LMOKE and MEED measurements were carried out during the deposition. Ferromagnetic ordering with an in-plane easy axis starts above 4.5 ML at room temperature. The Kerr rotation normalized by thickness is evaluated in the pseudomorphic regime and strain relaxed regime. The probing depth of the MOKE is found to be around 14 nm in Fe(100)/Ir(100). An antisymmetric component is observed in the re-magnetization loop measured using MOKE. This antisymmetric loop arises due to the quadratic magneto-optic coupling which is separated by symmetrization and antisymmetrization procedure. The observed quadratic magneto-optic coupling suggests that the analysis based on the assumption that the magneto-optic coupling is linear in magnetization has to be modified. In order to quantify the quadratic magneto-optic coupling parameters, a QMOKE measurement system is developed and measurements were carried out. Chapter 6 discusses SPLEED experiments carried out on various thicknesses of Fe(100) film. Fe(100) films grown on Ir(100) substrate with the thickness less than or equal to 4 ML is not ferromagnetic with in-plane easy axis at room temperature. The non-zero exchange asymmetry observed for 5 ML and above indicates the presence of ferromagnetic ordering. A difference in the profile of exchange asymmetry is observed between pseudomorphic and strain relaxed regime. Large spin-orbit asymmetry is observed for 1 ML and 2 ML Fe(100) which is unexpected from a low atomic number (Z) material. The reason for large spin-orbit asymmetry is still unknown. The energy-angle landscape of reflectivity, exchange asymmetry, spin-orbit asymmetry and figure of merit were evaluated for 21 ML of Fe(100). Many working points were identified for different types multichannel spin filter based on exchange interaction Finally, the various results are summarized and a broad outlook is given.

This work investigates the initial growth of iron and iron oxides on Ag(001). Surface structure and morphology of both post deposition annealed Fe films (in UHV and O2 atmosphere) as well as reactive grown iron oxide films will be analyzed in detail by low energy electron diffraction (LEED) and scanning tunneling microscopy (STM). The stoichiometry at the surface of the iron oxide films will be determined by X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES). The main focus of this work is to shed light on the question whether the growth of iron oxide films on Ag(001) is accompanied by the formation of strain reducing dislocation networks, or superstructures as found for other metal substrates in former studies. Here, we will distinguish between Fe films which were post deposition annealed in a thin O2 atmosphere and reactively grown iron oxide films.

In the presented thesis thin praseodymia films on non-passivated and passivated Si(111) substrates were investigated. The first part deals with PDA of praseodymia films with fluorite structure under UHV conditions in the temperature region from RT to 600°C. Here, a sophisticated model of the annealing process of praseodymia films is established. This is done by detailed analysis of XRD measurements using the kinematic diffraction theory in combination with the analysis of GIXRD, XRR and SPA-LEED measurements. It is shown that the untreated films, which are oxidized in 1 atm oxygen to obtain fluorite structure, do not exhibit pure PrO2 stoichiometry as it was assumed before. Instead, they decompose into two laterally coexisting species exhibiting a PrO2 and a Pr6O11. oxide phase, respectively. These species are laterally pinned to the lattice parameter of bulk Pr6O11. Homogeneous oxide films with Pr6O11 phase can be observed after annealing at 100°C and 150°C. Here, lateral strain caused by the pinning of the species is minimized and an increase of the crystallite sizes is determined. If higher annealing temperatures are applied, the film decomposes again into two coexisting species. Finally, after annealing at 300°C, a mixed crystalline film with both Pr2O3 and Pr2O3+Delta oxide phases is formed, where Delta denotes a considerable excess of oxygen within the sesquioxide phase. Again the lateral strain increases due to the tendency of praseodymia phases to increase their lattice parameters during oxygen loss combined with the lateral pinning. This is accompanied by a decrease of crystallite sizes, which are afterwards comparable to those of the untreated films. Further annealing at temperatures above 300°C does not significantly change the structure of the oxide film. However, the increase of the amorphous Pr-silicate interface between Si substrate and oxide at the expense of the crystalline oxide can be observed after annealing at higher temperatures. Furthermore, an increased mosaic spread of the crystallites occurs, which reduces the lateral strain caused by the oxygen loss. Nevertheless, the crystalline structure is stable against further annealing up to temperatures of 600°C. Transportation of the sample under ambient conditions after annealing at 200°C and 300°C leads to the formation of an additional crystalline structure at the surface which cannot be allocated to any praseodymia phase and may be explained by the contamination of the topmost crystalline layers with Pr-hydroxides. The results obtained from praseodymia films annealed in 1 atm nitrogen show that these films are good candidates to form homogeneous oxide films with pure cub-Pr2O3 structure by subsequent annealing in UHV. Here, a single oxide species is already observed after annealing at 300°C by SPA-LEED measurements which is in contrast to praseodymia films with fluorite structure where higher annealing temperatures (600°C) are necessary. In this case, negative effects like interface growth or increased defect density (mosaics, grain boundaries) can be minimized. Investigations on oxygen plasma-treated praseodymia films to obtain pure PrO2 stoichiometry are presented in the second part. Oxygen plasma-treated samples are compared with samples oxidized in 1 atm oxygen regarding the structure of the crystalline film. For this purpose, XRR and XRD measurements are performed to get structural information of the oxide film, which can be used to identify the corresponding oxide phases. Here, significantly smaller lattice constants of the crystalline oxide species can be observed after plasma treatment, which points to the incorporation of additional oxygen atoms. This verifies former studies, where a higher oxidation state of the oxide film was found by XPS measurements and it shows that plasma-treated films exhibit a higher oxidation state than films oxidized in 1 atm oxygen due to the availability of reactive atomic oxygen in the plasma. Furthermore, the Pr-silicate interface between crystalline film and Si substrate is not increased during plasma treatment. In the last part of the presented thesis, first results from the epitaxy of praseodymia films on Cl-passivated Si substrates are shown. The aim is to suppress the Pr-silicate formation during the growth process. Thus, praseodymia films are grown on passivated and non-passivated substrates to compare the crystallinity of both samples using XSW and LEED measurements. The structure of the oxide films on Cl-passivated Si is determined afterwards by XRR. It is shown that crystalline films with cub-Pr2O3 structure and several nanometer thickness can be successfully grown on Cl-passivated substrates. Here, the Pr-silicate interface layer are restricted to a single mono-layer. In contrast, the films grown on non-passivated substrates are completely amorphous containing Pr-silicates and Pr-silicides.

We employ a variant of optical absorption spectroscopy, namely in situ differential reflectance spectroscopy (DRS), for an analysis of the structure-properties relations of thin epitaxial organic films. Clear correlations between the spectra and the differently intense coupling to the respective substrates are found. While rather broad and almost structureless spectra are obtained for a quaterrylene (QT) monolayer on Au(111), the spectral shape resembles that of isolated molecules when QT is grown on graphite. We even achieve an efficient electronic decoupling from the subjacent Au(111) by inserting an atomically thin organic spacer layer consisting of hexa-peri-hexabenzocoronene (HBC) with a noticeably dissimilar electronic behavior. These observations are further consolidated by a systematic variation of the metal substrate (Au, Ag, and Al), ranging from inert to rather reactive. For this purpose, 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) is chosen to ensure comparability of the molecular film structures on the different metals, and also because its electronic alignment on various metal surfaces has previously been studied with great intensity. We present evidence for ionized PTCDA at several interfaces and propose the charge transfer to be related to the electronic level alignment governed by interface dipole formation on the respective metals. / Zur Analyse der Struktur-Eigenschafts-Beziehungen dünner, epitaktischer Molekülfilme wird in situ differentielle Reflexionsspektroskopie (DRS) als Variante der optischen Absorptionsspektroskopie verwendet. Klare Zusammenhänge zwischen den Spektren und der unterschiedlich starken Kopplung zum jeweiligen Substrat werden gefunden. Während man breite und beinahe unstrukturierte Spektren für eine Quaterrylen (QT) Monolage auf Au(111) erhält, ist die spektrale Form von auf Graphit abgeschiedenem QT ähnlich der isolierter Moleküle. Durch Einfügen einer atomar dünnen organischen Zwischenschicht bestehend aus Hexa-peri-hexabenzocoronen (HBC) mit einem deutlich unterschiedlichen elektronischen Verhalten gelingt sogar eine effiziente elektronische Entkopplung vom darunter liegenden Au(111). Diese Ergebnisse werden durch systematische Variation der Metallsubstrate (Au, Ag und Al), welche von inert bis sehr reaktiv reichen, untermauert. Zu diesem Zweck wird 3,4,9,10-Perylentetracarbonsäuredianhydrid (PTCDA) gewählt, um Vergleichbarkeit der molekularen Filmstrukturen zu gewährleisten, und weil dessen elektronische Anordnung auf verschiedenen Metalloberflächen bereits eingehend untersucht worden ist. Wir weisen ionisiertes PTCDA an einigen dieser Grenzflächen nach und schlagen vor, dass der Ladungsübergang mit der elektronischen Niveauanpassung zusammenhängt, welche mit der Ausbildung von Grenzflächendipolen auf den entsprechenden Metallen einhergeht.

In der vorliegenden Arbeit wurde mit Hilfe eines Photon-STM die Korrelation zwischen optischen Eigenschaften und der lokalen Morphologie an zwei unterschiedlichen Systemen untersucht. Hierfür wurden zum einem oxidgetragene Ensemble von Silber-Partikeln präpariert, wobei sowohl die Partikelform (Kuppel- und Scheibenform) als auch die deponierte Partikeldichte variiert werden konnte. Neben der Präparation solcher Partikel auf Al10O13/NiAl, konnten sphärische Silber-Kolloide geordnet, als auch ungeordnet auf HOPG aufgebracht und untersucht werden. Dabei zeigte sich, dass das Verhältnis von Höhen zu Breiten nicht nur einen signifikanten Einfluss auf die Mie-Resonanz des einzelnen Partikels hat, sondern auch die elektromagnetische Kopplung der Partikel in einem Ensemble stark kontrolliert. Die energetische Lage der Mie-Resonanz zeigt im Fall der kuppelförmigen Ag-Partikel eine starke Abhängigkeit vom Intepartikel-Abstand, was sich in einer Verschiebung zu höheren Energien für eine steigende Partikeldichte äußert. Eine solche Abhängigkeit konnte bei den Ensembles der scheibenförmigen Partikel nicht beobachtet werden. Des weiteren zeigte sich, dass, verglichen mit den ungeordneten Ensembles, die selbstorganisierte langreichweitige Ordnung der Silber-Kolloide auf HOPG nur einen schwachen Einfluss auf die energetische Position der Mie Resonanz hat.Das zweite hier untersuchte System sind dünne MgO Filme unterschiedlicher Dicken auf einem Mo(001) Substrat. Diese zeigen ein reichhaltiges Wachstumsverhalten, welches durch eine Differenz in den Gitterkonstanten von 5.3% begründet ist und erst ab etwa 25 ML zu einem flachen und defektarmen Film führt. Die so induzierte Spannung relaxiert bis zu einer Dicke von etwa 7 ML in einer periodischen Überstruktur die aus abwechselnd flachen und verkippten Ebenen an der MgO-Mo Grenzschicht hervorgeht. Für MgO Filme mit einer Dicke von etwa 12 ML werden dann Schraubenversetzungen, ausgedehnte verkippte Ebenen und Stufenkanten mit einer Orientierung entlang der Richtung beobachtet. Die optische Charakterisierung durch Feldemission von Elektronen aus der STM-Spitze in den MgO-Film wird dominiert von zwei Emissionsmaxima bei Energien von 3.1 eV und 4.4 eV. Die kontrollierte Nukleation von Gold Partikeln und die Erzeugung von Farbzentren im MgO Film erlaubten eine Zuordnung dieser Emissionen zu strahlenden Zerfällen von Exitonen an Ecken, Kinken bzw. Stufen des Magnesiumoxids. Solche Emissionsprozesse konnten allerdings nur unter Einstellungen beobachtet werden, bei denen ein gleichzeitiges Rastern der Oberfläche unmöglich ist. Bei moderaten Einstellungen war auch eine ortsaufgelösten Spektroskopie möglich, wobei dann neue Emissionsmechanismen beobachtet wurden. Dabei sind zwei Prozesse wesentlich; zum einen die Ausbildung von sog. Spitzen-induzierten Plasmonen im Bereich zwischen Spitze und dem Mo-Substrat, zum anderen strahlende Elektronenübergänge zwischen sog. Feldemissionsresonanzen, die sich im Spitze/MgO-Film System ausbilden. / In this thesis, the correlation between the optical properties and the local morphology of supported silver nanoparticle ensembles and MgO thin films deposited on Mo(001) systems is explored by means of Photon-STM. In the first section, dome and disk shaped Ag nanoparticle ensembles with increasing density on an alumina film on NiAl(110) were analyzed as well as ordered and disordered ensembles of Ag nanocolloids on HOPG. The aspect ratio of the Ag nanoparticles was found to have a significant influence not only on the Mie plasmon resonance of a single particle, but also on the electromagnetic coupling within the nanoparticle ensembles. The Mie resonance in the ensemble of dome shaped Ag nanoparticles shows a strong dependence on the interparticle distance, where it shifts to higher energies with increasing particle density, due to destructive interference effects. In the disk-like Ag ensembles, however, the plasmon energy is independent of particle-particle separation. The long-range lateral ordering of size-selected Ag nanocolloids is found to induce a high dipole-dipole coupling within the ensemble. This is mainly reflected by the enhancement of the spectral intensity of the in-plane Mie mode, due to constructive coupling. However, ensembles with either well-ordered or disordered arrangements reveal no important difference in their optical properties, reflecting the weak influence of the long-range order in the particle ensemble. Thin MgO films with different thicknesses were grown on a Mo(001) surface. The stress resulting from the 5.3% lattice mismatch between the MgO(001) and the Mo(001) lattice parameters is found to control the surface morphology of the MgO film until thicknesses of around 25ML at which flat and defect-poor films are obtained. The relaxation of the stress induces a periodic network in the first 7ML of the MgO film, consisting of alternated flat and tilted mosaics. The presence of screw dislocations, steps oriented along the MgO directions, and tilted planes is observed when the MgO films are approximately 12ML thick. In addition, an increase of the MgO work function around these new surface features is revealed from STM spectroscopy. The photon emission induced by field-emitted electron injection from the STM tip into the MgO films is dominated by two emission bands located at 3.1eV and 4.4eV. To check the origin of these bands, further experiments, namely, nucleation of Au particles and creation of F-centers on the MgO surface, have been performed. The nucleation of Au particles at the low coordinated sites is found to quench the MgO optical signal, while the creation or annihilation of F-centers does not alter the MgO emission bands. The 3.1eV and the 4.4eV bands are therefore assigned to the radiative decay of MgO excitons at corner and kink sites, and step sites, respectively. Besides, spatially resolved optical measurements in the tunneling mode of the STM revealed different light emission mechanisms. These radiative processes are mainly related to tip-induced plasmons that form between the tip and the Mo support and to electron transitions between field-emission-resonance states in the STM tip-MgO film junction. The signal from exciton decays at corners and kinks of the MgO surface is however only observed at excitation conditions where the spatial resolution is already strongly reduced.

The topic of this work is the structural characterization and theoretical modeling of organic single and heterolayers. The growth of sub-monolayers and monolayers (ML) of the two polycyclic aromatic hydrocarbons quaterrylene (QT) and hexa-peri-hexabenzocoronene (HBC) on Ag(111) and Au(111) was investigated. A transition from a disordered, isotropic phase to an ordered phase with increasing coverage was found. The lattice of the ordered phase turned out to be coverage dependent. The intermolecular potential was modeled including Coulomb and van der Waals interaction by a force-field approach. The postulated repulsive character of the potential could be connected to the non-uniform intramolecular charge distribution and to a screening of the van der Waals forces. Furthermore, the influence of the variable lattice constant on the epitaxial growth of HBC was studied. The second part of this work deals with a ML of 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) on a ML of HBC. In dependency on the initial lattice constant of HBC, a total of three line-on-line (LOL) and point-on-line coincident phases of PTCDA (with respect to HBC) was found. Following an analysis of the general properties of LOL coincident systems via force-field calculations, a new method to predict the structure of such systems is introduced. / Thema dieser Arbeit ist die strukturelle Charakterisierung von organischen Einfach- und Heterolagen sowie deren theoretische Beschreibung und Modellierung. Es wurden Submonolagen und Monolagen (ML) der polyzyklischen Kohlenwasserstoffe Quaterrylen (QT) und Hexa-peri-hexabenzocoronen (HBC) auf Ag(111) und Au(111) Einkristallen untersucht und ein Übergang von einer ungeordneten, isotropen Phase zu einer geordneten Phase mit steigender Bedeckung beobachtet. Die geordnete Phase wies dabei bedeckungsabhängige Gitterkonstanten auf. Das intermolekulare Potential wurde unter Berücksichtigung von Coulomb und van der Waals Anteilen mittels Kraftfeldmethoden modelliert. Der postulierte repulsive Charakter des Potentials konnte auf die Ladungsverteilung im Molekül und eine Abschwächung des van der Waals Potentials zurückgeführt werden. Weiterhin wurde der Einfluss der variablen HBC Gitterkonstante auf die epitaktische Relation des Gitters zum Metallsubstrat untersucht. Der zweite Teil der Arbeit widmet sich der Untersuchung einer ML 3,4,9,10-Perylenetetracarboxylic dianhydrid (PTCDA) auf einer ML HBC. Dabei wurden, in Abhängigkeit von der HBC Gitterkonstante, insgesamt drei verschiedene Typen von line-on-line bzw. point-on-line Epitaxie nachgewiesen. Im Anschluss an eine Analyse der generellen Eigenschaften solcher epitaktischer Lagen mittels Kraftfeldrechnungen wird eine neue Methode zur Vorhersage der Struktur konkreter Systeme vorgestellt.

The topic of this work is the structural characterization and theoretical modeling of organic single and heterolayers. The growth of sub-monolayers and monolayers (ML) of the two polycyclic aromatic hydrocarbons quaterrylene (QT) and hexa-peri-hexabenzocoronene (HBC) on Ag(111) and Au(111) was investigated. A transition from a disordered, isotropic phase to an ordered phase with increasing coverage was found. The lattice of the ordered phase turned out to be coverage dependent. The intermolecular potential was modeled including Coulomb and van der Waals interaction by a force-field approach. The postulated repulsive character of the potential could be connected to the non-uniform intramolecular charge distribution and to a screening of the van der Waals forces. Furthermore, the influence of the variable lattice constant on the epitaxial growth of HBC was studied. The second part of this work deals with a ML of 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) on a ML of HBC. In dependency on the initial lattice constant of HBC, a total of three line-on-line (LOL) and point-on-line coincident phases of PTCDA (with respect to HBC) was found. Following an analysis of the general properties of LOL coincident systems via force-field calculations, a new method to predict the structure of such systems is introduced.:1 Introduction 2 Experimental Methods 2.1 Organic molecular beam epitaxy 2.2 Scanning tunneling microscopy (STM) 2.3 Low-energy electron diffraction (LEED) 2.4 Molecules and substrates: Basic properties and literature review 2.4.1 3,4,9,10-Perylenetetracarboxylic dianhydride 2.4.2 Hexa-peri-hexabenzocoronene 2.4.3 Quaterrylene 2.4.4 Metal substrates: Au(111) and Ag(111) 3 Theory and Modeling 3.1 Reciprocal space and LEED 3.1.1 Fourier transform and geometrical LEED theory 3.1.2 Kinematic and dynamic LEED theory 3.1.3 Further applications of the Fourier transform 3.2 Computational chemistry 3.2.1 Calculating molecular properties 3.2.2 The atomic force-field method 3.2.3 Potential energy calculations in extended systems 4 Epitaxy in terms of potential energy 5 Interaction of QT and HBC at Sub-ML and ML Coverage 5.1 Experimental results 5.2 Modeling technique 5.3 Results of the model calculation 5.4 Discussion of results 5.5 Conclusion 6 The Ordered Phases of HBC on Ag(111) and Au(111 6.1 Geometrical analysis of epitaxy 6.2 Energetic gain of epitaxial structures 6.3 Comparison to experiment 6.4 Influence of the Au(111) surface reconstruction 6.5 Conclusion 7 Organic Heterosystems of PTCDA and HBC on Au(111) 7.1 PTCDA on Au(111) revisited 7.2 LEED and STM on PTCDA/HBC/Au(111) samples 7.2.1 A “compact” HBC layer substrate 7.2.2 A “loosely packed” HBC layer substrate 7.2.3 Summary of LEED results 7.2.4 STM results 7.3 Epitaxial relations in the system PTCDA/HBC/Au(111) 7.3.1 Geometrical analysis of epitaxy 7.3.2 Energetic gain of epitaxial structures 7.3.3 Mutual alignment of lattices 7.4 Heterosystems of PTCDA and HBC with inverted stacking sequence 8 General Properties of POL and LOL Epitaxy 8.1 A new coordinate system 8.2 Specific properties of the substrate-adsorbate potential 8.3 The “natural order” of the lattice lines 8.4 Prediction of epitaxial growth - a “LOL predictor” 8.4.1 Method 8.4.2 Results 9 General Conclusions and Future Perspectives 9.1 Conclusion 9.2 Outlook Appendix A.1 Conductance in a STM: The 1D WKB model A.2 Extraction of the DOS from STS measurements by means of the 1D WKB model A.3 Practical application of the 1D WKB model A.4 The normalized differential conductivity A.5 A new normalization method / Thema dieser Arbeit ist die strukturelle Charakterisierung von organischen Einfach- und Heterolagen sowie deren theoretische Beschreibung und Modellierung. Es wurden Submonolagen und Monolagen (ML) der polyzyklischen Kohlenwasserstoffe Quaterrylen (QT) und Hexa-peri-hexabenzocoronen (HBC) auf Ag(111) und Au(111) Einkristallen untersucht und ein Übergang von einer ungeordneten, isotropen Phase zu einer geordneten Phase mit steigender Bedeckung beobachtet. Die geordnete Phase wies dabei bedeckungsabhängige Gitterkonstanten auf. Das intermolekulare Potential wurde unter Berücksichtigung von Coulomb und van der Waals Anteilen mittels Kraftfeldmethoden modelliert. Der postulierte repulsive Charakter des Potentials konnte auf die Ladungsverteilung im Molekül und eine Abschwächung des van der Waals Potentials zurückgeführt werden. Weiterhin wurde der Einfluss der variablen HBC Gitterkonstante auf die epitaktische Relation des Gitters zum Metallsubstrat untersucht. Der zweite Teil der Arbeit widmet sich der Untersuchung einer ML 3,4,9,10-Perylenetetracarboxylic dianhydrid (PTCDA) auf einer ML HBC. Dabei wurden, in Abhängigkeit von der HBC Gitterkonstante, insgesamt drei verschiedene Typen von line-on-line bzw. point-on-line Epitaxie nachgewiesen. Im Anschluss an eine Analyse der generellen Eigenschaften solcher epitaktischer Lagen mittels Kraftfeldrechnungen wird eine neue Methode zur Vorhersage der Struktur konkreter Systeme vorgestellt.:1 Introduction 2 Experimental Methods 2.1 Organic molecular beam epitaxy 2.2 Scanning tunneling microscopy (STM) 2.3 Low-energy electron diffraction (LEED) 2.4 Molecules and substrates: Basic properties and literature review 2.4.1 3,4,9,10-Perylenetetracarboxylic dianhydride 2.4.2 Hexa-peri-hexabenzocoronene 2.4.3 Quaterrylene 2.4.4 Metal substrates: Au(111) and Ag(111) 3 Theory and Modeling 3.1 Reciprocal space and LEED 3.1.1 Fourier transform and geometrical LEED theory 3.1.2 Kinematic and dynamic LEED theory 3.1.3 Further applications of the Fourier transform 3.2 Computational chemistry 3.2.1 Calculating molecular properties 3.2.2 The atomic force-field method 3.2.3 Potential energy calculations in extended systems 4 Epitaxy in terms of potential energy 5 Interaction of QT and HBC at Sub-ML and ML Coverage 5.1 Experimental results 5.2 Modeling technique 5.3 Results of the model calculation 5.4 Discussion of results 5.5 Conclusion 6 The Ordered Phases of HBC on Ag(111) and Au(111 6.1 Geometrical analysis of epitaxy 6.2 Energetic gain of epitaxial structures 6.3 Comparison to experiment 6.4 Influence of the Au(111) surface reconstruction 6.5 Conclusion 7 Organic Heterosystems of PTCDA and HBC on Au(111) 7.1 PTCDA on Au(111) revisited 7.2 LEED and STM on PTCDA/HBC/Au(111) samples 7.2.1 A “compact” HBC layer substrate 7.2.2 A “loosely packed” HBC layer substrate 7.2.3 Summary of LEED results 7.2.4 STM results 7.3 Epitaxial relations in the system PTCDA/HBC/Au(111) 7.3.1 Geometrical analysis of epitaxy 7.3.2 Energetic gain of epitaxial structures 7.3.3 Mutual alignment of lattices 7.4 Heterosystems of PTCDA and HBC with inverted stacking sequence 8 General Properties of POL and LOL Epitaxy 8.1 A new coordinate system 8.2 Specific properties of the substrate-adsorbate potential 8.3 The “natural order” of the lattice lines 8.4 Prediction of epitaxial growth - a “LOL predictor” 8.4.1 Method 8.4.2 Results 9 General Conclusions and Future Perspectives 9.1 Conclusion 9.2 Outlook Appendix A.1 Conductance in a STM: The 1D WKB model A.2 Extraction of the DOS from STS measurements by means of the 1D WKB model A.3 Practical application of the 1D WKB model A.4 The normalized differential conductivity A.5 A new normalization method

Thin metallic films with magnetic properties like magnetite are an interesting material in current technological applications. In the presented work the iron oxide films are grown by molecular beam epitaxy on MgO(001) substrates at temperatures between room temperature and 600K. The film and surface structure are investigated by x-ray reflectometry (XRR), x-ray diffraction (XRD) and low energy electron diffraction (LEED). The chemical properties are investigated by x-ray photoelectron spectroscopy (XPS). Furthermore, charge transfer multiplet (CTM) calculations are performed as a means to gain additional information from photoemission spectra. It is shown that only for temperatures higher than 500K the oxide film forms a spinel structure. A previously unobserved (2x1) surface reconstruction in two orthogonal domains is found for various preparation conditions. The application of CTMs results in good quantitative and qualitative agreement to other methods for the determination of the film stoichiometry. In addition CTMs can well describe the segregation of Mg atoms into the oxide film either during film growth or during film annealing. It is found that initially Mg substitutes Fe on all possible lattice sites, only for prolonged treatment at high temperature do Mg atoms favour the octahedral lattice sites of divalent Fe.