21 |
A compiler-based leakage reduction technique by power-gating functional units in embedded microprocessorsRoy, Soumyaroop 01 June 2006 (has links)
Power-gating is a technique investigated widely for reducing leakage energy in the functional units of microprocessors at the architectural level. Effective power-gating involves deactivating idle functional units for sustained periods incurring little or no performance degradation. Accurate prediction of long idle periods is essential, which, in turn, depends on the application program characteristics.In this thesis, we propose a compiler-based leakage reduction technique for embedded architectures by exploiting the well-known attributes of embedded applications, namely, small code size and intensive loops. From the control flow graph (CFG) representation of the source program, we construct a forest of loop hierarchy trees (LHTs), which capture the nesting loop properties of the program. As an LHT satisfies the partial ordering on the loop nesting, we exploit this property to identify maximal subgraphs (of functional unit idleness) in the original program. For each subgraph so found, a sleep instruction is introduced at the entry point of the corresponding code segement, thus optimizing the number of sleep instructions. The sleep instruction has one operand, a bit-vector comprised of ON/OFF controlbits for all functional units in the data path. Our target architecture is a modified ARM processor model comprising of functional units with power-gating ability. We obtained an average leakage energy reduction of 34.1% for 12 benchmarks chosen from the MiBench suite, with range of 19.5% and standard deviation of 6.5%.
|
22 |
A coordinated approach to reconfigurable analog signal processingSchlottmann, Craig Richard 03 July 2012 (has links)
The purpose of this research is to create a solid framework for embedded system design with field-programmable analog arrays (FPAAs). To achieve this goal, we've created a unified approach to the three phases of FPAA system design: (1) the hardware architecture; (2) the circuit design and modeling; and (3) the high-level software tools. First, we describe innovations to the reconfigurable analog hardware that enable advanced signal processing and integration into embedded systems. We introduce the multiple-input translinear element (MITE) FPAA and the dynamically-reconfigurable RASP 2.9v FPAA, which was designed explicitly for interfacing with external digital systems. This compatibility creates a streamlined workflow for dropping the FPAA hardware into mixed-signal embedded systems. The second phase, algorithm analysis and modeling, is important to create a useful and reliable library of components for the system designer. We discuss the concept and procedure of analog abstraction that empowers non-circuit design engineers to take full advantage of analog techniques. We use the analog vector-matrix multiplier as an example for a detailed discussion on computational analog analysis and system mapping to the FPAA. Lastly, we describe high-level software tools, which are an absolute necessity for the design of large systems due to the size and complexity of modern FPAAs. We describe the Sim2Spice tool, which allows system designers to develop signal processing systems in the Simulink environment. The tool then compiles the system to the FPAA hardware. By coordinating the development of these three phases, we've created a solid unified framework that empowers engineers to utilize FPAAs.
|
23 |
System Level Power and Thermal Management on Embedded ProcessorsJanuary 2012 (has links)
abstract: Semiconductor scaling technology has led to a sharp growth in transistor counts. This has resulted in an exponential increase on both power dissipation and heat flux (or power density) in modern microprocessors. These microprocessors are integrated as the major components in many modern embedded devices, which offer richer features and attain higher performance than ever before. Therefore, power and thermal management have become the significant design considerations for modern embedded devices. Dynamic voltage/frequency scaling (DVFS) and dynamic power management (DPM) are two well-known hardware capabilities offered by modern embedded processors. However, the power or thermal aware performance optimization is not fully explored for the mainstream embedded processors with discrete DVFS and DPM capabilities. Many key problems have not been answered yet. What is the maximum performance that an embedded processor can achieve under power or thermal constraint for a periodic application? Does there exist an efficient algorithm for the power or thermal management problems with guaranteed quality bound? These questions are hard to be answered because the discrete settings of DVFS and DPM enhance the complexity of many power and thermal management problems, which are generally NP-hard. The dissertation presents a comprehensive study on these NP-hard power and thermal management problems for embedded processors with discrete DVFS and DPM capabilities. In the domain of power management, the dissertation addresses the power minimization problem for real-time schedules, the energy-constrained make-span minimization problem on homogeneous and heterogeneous chip multiprocessors (CMP) architectures, and the battery aware energy management problem with nonlinear battery discharging model. In the domain of thermal management, the work addresses several thermal-constrained performance maximization problems for periodic embedded applications. All the addressed problems are proved to be NP-hard or strongly NP-hard in the study. Then the work focuses on the design of the off-line optimal or polynomial time approximation algorithms as solutions in the problem design space. Several addressed NP-hard problems are tackled by dynamic programming with optimal solutions and pseudo-polynomial run time complexity. Because the optimal algorithms are not efficient in worst case, the fully polynomial time approximation algorithms are provided as more efficient solutions. Some efficient heuristic algorithms are also presented as solutions to several addressed problems. The comprehensive study answers the key questions in order to fully explore the power and thermal management potentials on embedded processors with discrete DVFS and DPM capabilities. The provided solutions enable the theoretical analysis of the maximum performance for periodic embedded applications under power or thermal constraints. / Dissertation/Thesis / Ph.D. Computer Science 2012
|
24 |
A Nonlinear Programming Approach for Dynamic Voltage ScalingArdi, Shanai January 2005 (has links)
Embedded computing systems in portable devices need to be energy efficient, yet they have to deliver adequate performance to the often computationally expensive applications. Dynamic voltage scaling is a technique that offers a speed versus power trade-off, allowing the application to achieve considerable energy savings and, at the same time, to meet the imposed time constraints. In this thesis, we explore the possibility of using optimal voltage scaling algorithms based on nonlinear programming at the system level, for a complex multiprocessor scheduling problem. We present an optimization approach to the modeled nonlinear programming formulation of the continuous voltage selection problem excluding the consideration of transition overheads. Our approach achieves the same optimal results as the previous work using the same model, but due to its speed, can be efficiently used for design space exploration. We validate our results using numerous automatically generated benchmarks.
|
25 |
Dynamically Self-reconfigurable Systems for Machine IntelligenceHe, Haibo 03 October 2006 (has links)
No description available.
|
26 |
Low power and reliable design methodologies for 3D ICsJung, Moongon 22 May 2014 (has links)
The main objective of this dissertation is to explore and develop computer-aided-design methodologies and optimization techniques for reliability, performance, and power of through-silicon-via-based 3D IC designs. Through-silicon-via (TSV), a vertical interconnect element between dies, is the key enabling technology in 3D ICs. This new design element provides unprecedented design freedom as well as challenges. To maximize benefits and overcome challenges in TSV-based 3D ICs, new analysis methodologies and optimization techniques should be developed. In this dissertation, first, the robustness of 3D power delivery network is assessed under different power/ground TSV placement schemes and TSV RC variations. Next, thermo-mechanical stress and reliability problems are examined in full-chip/stack scale using the principle of linear superposition of stress tensors. Finally, physical design methods for low power 3D designs are explored to enhance the 3D power benefit over the 2D counterpart.
|
27 |
Design of a low power 8-bit A/D converter for wireless neural recorder applicationsYang, Jiao 10 July 2017 (has links)
Human brain and related topics like neuron spikes and their active potentials have become more and more attractive to people these days, as these issues are extremely helpful for curing many neural injuries and cognitive diseases. One method to discover this field is by designing a chip embedded in brains with probes to actual neurons. It is obvious that batteries are not practical for these applications and thereby RF radiation is used as power sources, revealing that chips should operate under a very low power supply. Since neural signals are analog waveforms, analog-to-digital converter (A/D converter, ADC) is the key component in a neural recorder chip.
This thesis proposes the complete design of a low power 8-bit successive approximation register (SAR) A/D converter for use in a wireless neural recorder chip, realizing the function of digitizing a sampled neural signal with a frequency distribution of 10Hz to 10kHz. A modified energy-saving capacitor array in the SAR structure is provided to help save power dissipation. Therefore, the ADC shall operate within a power budget of 20μW maximum from a 1V power source, at a clock frequency of 500kHz corresponding to a conversion rate of 55.5-kS/s. All the circuits are designed and implemented based on the IBM/Global Foundries 8HP 130nm BiCMOS technology. Simulations of schematic and layout versions are done respectively to verify the functionality, linearity and power consumption of the ADC.
Key words: Successive approximation register analog-to-digital converter (SAR-ADC), low power design, energy-saving capacitor array, neural recorder applications
|
28 |
Energy-efficient memory hierarchy for motion and disparity estimation in multiview video codingSampaio, Felipe Martin January 2013 (has links)
Esta dissertação de mestrado propõe uma hierarquia de memória para a Estimação de Movimento e de Disparidade (ME/DE) centrada nas referências da codificação, estratégia chamada de Reference-Centered Data Reuse (RCDR), com foco em redução de energia em codificadores de vídeo multivistas (MVC - Multiview Video Coding). Nos codificadores MVC, a ME/DE é responsável por praticamente 98% do consumo total de energia. Além disso, até 90% desta energia está relacionada com a memória do codificador: (a) acessos à memória externa para a busca das referências da ME/DE (45%) e (b) memória interna (cache) para manter armazenadas as amostras da área de busca e enviá-las para serem processadas pela ME/DE (45%). O principal objetivo deste trabalho é minimizar de maneira conjunta a energia consumida pelo módulo de ME/DE com relação às memórias externa e interna necessárias para a codificação MVC. A hierarquia de memória é composta por uma memória interna (a qual armazena a área de busca inteira), um controle dinâmico para a estratégia de power-gating da memória interna e um compressor de resultados parciais. Um controle de buscas foi proposto para explorar o comportamento da busca com o objetivo de atingir ainda mais reduções de energia. Além disso, este trabalho também agrega à hierarquia de memória um compressor de quadros de referência de baixa complexidade. A estratégia RCDR provê reduções de até 68% no consumo de energia quando comparada com estratégias estadoda- arte que são centradas no bloco atual da codificação. O compressor de resultados parciais é capaz de reduzir em 52% a comunicação com memória externa necessária para o armazenamento desses elementos. Quando comparada a técnicas de reuso de dados que não acessam toda área de busca, a estratégia RCDR também atinge os melhores resultados em consumo de energia, visto que acessos regulares a memórias externas DDR são energeticamente mais eficientes. O compressor de quadros de referência reduz ainda mais o número de acessos a memória externa (2,6 vezes menos acessos), aliando isso a perdas insignificantes na eficiência da codificação MVC. A memória interna requerida pela estratégia RCDR é até 74% menor do que estratégias centradas no bloco atual, como Level C. Além disso, o controle dinâmico para a técnica de power-gating provê reduções de até 82% na energia estática, o que é o melhor resultado entre os trabalho relacionados. A energia dinâmica é tratada pela técnica de união dos blocos candidatos, atingindo ganhos de mais de 65%. Considerando as reduções de consumo de energia atingidas pelas técnicas propostas neste trabalho, conclui-se que o sistema de hierarquia de memória proposto nesta dissertação atinge seu objetivo de atender às restrições impostas pela codificação MVC, no que se refere ao processamento do módulo de ME/DE. / This Master Thesis proposes a memory hierarchy for the Motion and Disparity Estimation (ME/DE) centered on the encoding references, called Reference-Centered Data Reuse (RCDR), focusing on energy reduction in the Multiview Video Coding (MVC). In the MVC encoders the ME/DE represents more than 98% of the overall energy consumption. Moreover, in the overall ME/DE energy, up to 90% is related to the memory issues, and only 10% is related to effective computation. The two items to be concerned with: (1) off-chip memory communication to fetch the reference samples (45%) and (2) on-chip memory to keep stored the search window samples and to send them to the ME/DE processing core (45%). The main goal of this work is to jointly minimize the on-chip and off-chip energy consumption in order to reduce the overall energy related to the ME/DE on MVC. The memory hierarchy is composed of an onchip video memory (which stores the entire search window), an on-chip memory gating control, and a partial results compressor. A search control unit is also proposed to exploit the search behavior to achieve further energy reduction. This work also aggregates to the memory hierarchy a low-complexity reference frame compressor. The experimental results proved that the proposed system accomplished the goal of the work of jointly minimizing the on-chip and off-chip energies. The RCDR provides off-chip energy savings of up to 68% when compared to state-of-the-art. the traditional MBcentered approach. The partial results compressor is able to reduce by 52% the off-chip memory communication to handle this RCDR penalty. When compared to techniques that do not access the entire search window, the proposed RCDR also achieve the best results in off-chip energy consumption due to the regular access pattern that allows lots of DDR burst reads (30% less off-chip energy consumption). Besides, the reference frame compressor is capable to improve by 2.6x the off-chip memory communication savings, along with negligible losses on MVC encoding performance. The on-chip video memory size required for the RCDR is up to 74% smaller than the MB-centered Level C approaches. On top of that, the power-gating control is capable to save 82% of leakage energy. The dynamic energy is treated due to the candidate merging technique, with savings of more than 65%. Due to the jointly off-chip communication and on-chip storage energy savings, the proposed memory hierarchy system is able to meet the MVC constraints for the ME/DE processing.
|
29 |
Mixed RTL and gate-level power estimation with low power design iteration / Lågeffektsestimering på kombinerad RTL- och grind-nivå med lågeffekts design iterationNilsson, Jesper January 2003 (has links)
<p>In the last three decades we have witnessed a remarkable development in the area of integrated circuits. From small logic devices containing some hundred transistors to modern processors containing several tens of million transistors. However, power consumption has become a real problem and may very well be the limiting factor of future development. Designing for low power is therefore increasingly important. To accomplice an efficient low power design, accurate power estimation at early design stage is essential. The aim of this thesis was to set up a power estimation flow to estimate the power consumption at early design stage. The developed flow spans over both RTL- and gate-level incorporating Mentor Graphics Modelsim (RTL-level simulator), Cadence PKS (gate- level synthesizer) and own developed power estimation tools. The power consumption is calculated based on gate-level physical information and RTL- level toggle information. To achieve high estimation accuracy, real node annotations is used together with an own developed on-chip wire model to estimate node voltage swing. </p><p>Since the power estimation may be very time consuming, the flow also includes support for low power design iteration. This gives efficient power estimation speedup when concentrating on smaller sub- parts of the design.</p>
|
30 |
CDMA Channel Selection Using Switched Capacitor TechniqueNejadmalayeri, Amir Hossein January 2001 (has links)
CDMA channel selection requires sharp as well as wide-band Filtering. SAW Filters which have been used for this purpose are only available in IF range. In direct conversion receivers this has to be done at low frequencies. Switched Capacitor technique has been employed to design a low power, highly selective low-pass channel select Filter for CDMA wireless receivers. The topology which has been chosen ensures the low sensitivity of the Filter response. The circuit has been designed in a mixed-mode 0. 18u CMOS technology working with a single supply of 1. 8 V while its current consumption is less than 10 mA.
|
Page generated in 0.0831 seconds