Orientador: Dayse Iara dos Santos / Resumo: O desenvolvimento de materiais cerâmicos é um campo de pesquisa cujos resultados são extremamente promissores para aplicações tecnológicas. Particularmente, no caso dos materiais nanoestruturados baseados no óxido titânio, observa-se grande potencial de aplicação em dispositivos optoeletrônicos, bem como, para processos de fotocatálise, visto que apresenta um bandgap direto de 3,2 eV. Além disso, o aperfeiçoamento das propriedades ópticas, por meio da interação entre óxidos de diferentes bandas eletrônicas, têm sido estudado por muitos autores. Por esta razão, compósitos nanoestruturados formados de dois ou mais óxidos, cujas propriedades são distintas quando isolados, têm sido sintetizados juntos e caracterizados a fim de avaliar possíveis interações sinérgicas. Neste trabalho, foram preparados e caracterizados os compósitos TiO2/CuO, TiO2/ZnO e TiO2/ZrO2. As sínteses foram realizadas pelo método Sol-gel original e pelo método Poliol modificado, e ambos os processos se mostraram propícios para a obtenção de nanocompósitos e óxidos nanoparticulados. O método Poliol produziu compósitos formados de partículas micrométricas de dióxido de titânio revestidas do segundo óxido, enquanto o processo Sol-gel resultou em material constituído de agregados de nanocristais com alta mesoporosidade. Por meio da difração de raios X dos pós tratados gradualmente até 1000 °C observou-se que a formação e cristalização dos óxidos ocorrem em temperatura mais alta quando o material é resultante do ... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: The development of ceramic materials is a field of research whose results are extremely promising for technological applications. Particularly, in the case of nanostructured materials based on titanium oxide, there is a great potential for application in optoelectronic devices, as well as for photocatalysis processes, since it has a direct bandgap of 3.2 eV. In addition, the improvement of the optical properties through the interaction between oxides of different electronic bands has been studied by many authors. For this reason, nanostructured composites formed of two or more oxides, whose properties are distinct when isolated, have been synthesized together and characterized in order to evaluate possible synergistic interactions. In this work the TiO2 / CuO, TiO2 / ZnO and TiO2 / ZrO2 composites were prepared and characterized. The syntheses were carried out using the original Sol-gel method and the modified Polyol method, and both processes proved to be suitable for nanocomposites and nanoparticulate oxides. The polyol method produced composites formed of micrometric titanium dioxide particles coated with the second oxide, while the sol-gel process resulted in material composed of nanocrystalline aggregates with high mesoporosity. By X-ray diffraction of the powders gradually treated to 1000 °C it was observed that the formation and crystallization of the oxides occur at a higher temperature when the material is produced by the Sol-gel process. With the observation of the ... (Complete abstract click electronic access below) / Doutor

<div> <p><a>Polymer nanocomposites are envisioned for use in many advanced applications, such as structural industries, aerospace, automotive technology and electronic materials, due to the improved properties like mechanical strengthening, thermal and chemical stability, easy bulk processing, and/or light-weight instigated by the filler-matrix combination compared to the neat matrix. In recent years, due to increasing environmental concerns, many industries are inclining towards developing sustainable and renewable polymer nanocomposites. Cellulose nanomaterials (CNs), including cellulose nanocrystals (CNCs) and cellulose nanofibrils (CNFs), have gained popularity due to their excellent mechanical properties and eco-friendliness (extracted from trees, algae, plants etc.). However, to develop CN-reinforced nanocomposites with industrial applications it is necessary to understand impact of hygroscopic swelling (which has very limited </a>quantitative study at present), aspect ratio, orientation, and content of CNs on the overall performance of nanocomposites; and overcome the low dispersibility of CNs and improve their compatibility with hydrophobic matrix. In this work, we attempt to understand the influence of single nanocrystals in the hygroscopic and optical response exhibited by nanostructured films; effect of CNCs on the properties of PVA/CNC fibers by experimental evidence with mathematical modeling predictions; and hydrophobized CNFs using a facile, aqueous surface modification to improve interfacial compatibility with epoxy. </p><p><br></p> <p>To evaluate the effect of CNC alignment in the bulk response to hygroscopic expansion, self-organized and shear-oriented CNC films were prepared under two different mechanisms. The coefficient of hygroscopic swelling (CHS) of these films was determined by using a new contact-free method of Contrast Enhanced Microscopy Digital Image Correlation (CEMDIC) that enabled the characterization of dimensional changes induced by hygroscopic swelling of the films. This method can be readily used for other soft materials to accurately measure hygroscopic strain in a non-destructive way. By calculating the CHS values of CNC films, it was determined that hygroscopic swelling is highly dependent on the alignment of nanocrystals within the films, with aligned CNC films showing dramatically reduced hygroscopic expansion than randomly oriented films. Finite element analysis was used to simulate moisture sorption and kinetics profile which further predicted moisture diffusion as the predominant mechanism for swelling of CNC films. </p> <p><br></p><p>To study the effects of different types and aspect ratios of CNCs on mechanical, thermal and morphological properties of polyvinyl alcohol (PVA) composite <a>fibers, CNCs extracted from wood pulp and cotton were reinforced into PVA to produce fibers by dry-jet-wet spinning. The fibers were collected as-spun and with first stage drawing up to draw ratio 2. </a>The elastic modulus and tensile strength of the fibers improved with increasing CNC content (5 – 15 wt. %) at the expense of their strain-to-failure. The mechanical properties of fibers with cotton CNC were higher than the fibers with wood CNC when the same amount of CNCs were added due to their higher aspect ratio. The degree of orientation along the spun fiber axis was quantified by 2D X-ray diffraction. As expected, the CNC orientation correlates to the mechanical properties of the composite fibers. Micromechanical models were used to predict the fiber performance and compare with experimental results. Finally, surface and cross-sectional morphologies of fibers were analyzed by scanning electron microscopy and optical microscopy.</p><p><br></p> <p>To improve the dispersibility and compatibility of CNFs with epoxy, CNFs were modified by using a two-step water-based method where tannic acid (TA) acts as a primer with CNF suspension and reacts with hexadecylamine (HDA), forming the modified product as CNF-TA-HDA. The modified (-m) and unmodified (-um) CNFs were filled into hydrophobic epoxy resin with a co-solvent (acetone), which was subsequently removed to form a solvent-free two component epoxy system, followed by addition of hardener to cure the resin. Better dispersion and stronger adhesion between fillers and epoxy were obtained for m-CNF than the um-CNF, resulting in better mechanical properties of nanocomposites at the same loading. Thermal stability and the degradation temperature of m-CNF/epoxy improved when compared to neat epoxy. </p> </div> <br>

Les matériaux nanostructurés suscitent un intérêt qui va croissant en raison de leurs propriétés chimiques et physiquesexceptionnelles. A cause de la complexité et du coût des développements expérimentaux à l’échelle nano, la simulationnumérique devient une alternative de plus en plus populaire aux études expérimentales. Dans ce travail de thèse, nous avons essayé de combiner des simulations à l’échelle atomique avec de la modélisation en milieu continu pour évaluer la conductivité thermique et la réponse élastique de matériaux nanostructurés. Nous avons utilisé des simulations de dynamique moléculaire pour calculer la réponse mécanique et thermique des matériaux sur des volumes à l’échelle nano. Des méthodes de micromécanique et la méthode des éléments finis, qui utilisent la mécanique des milieux continus, ont permis d’évaluer les propriétés mécaniques des matériaux à l'échelle macroscopique. Les résultats obtenus par ces simulations numériques ont été ensuite comparés avec ceux issus de l’expérience. / Nanostructured materials are gaining an ongoing demand because of their exceptional chemical and physical properties. Due to complexities and costs of experimental studies at nanoscale, computer simulations are getting more attractive asexperimental alternatives. In this PhD work, we tried to use combination of atomistic simulations and continuum modeling for the evaluation of thermal conductivity and elastic stiffness of nanostructured materials. We used molecular dynamics simulations to probe and investigate the thermal and mechanical response of materials at nanoscale. The finite element and micromechanics methods that are on the basis of continuum mechanics theories were used to evaluate the bulk properties of materials. The predicted properties are then compared with existing experimental results.

Les nanocomposites polymères diélectriques ayant une constante diélectrique élevée et une faible perte diélectrique ont reçu un grand intérêt pour une utilisation dans le domaine du condensateur électrostatique. De manière générale, les performances diélectriques améliorées des nanocomposites sont déterminées par le type et la nature des polymères et des nanocharges sélectionnés, ainsi que par l'effet de couplage interfacial entre les matrices et les nanocharges. Parmi ces facteurs, les propriétés physiques, les géométries et les structures des composants des nanocharges jouent un rôle essentiel dans la détermination des performances diélectriques des nanocomposites. Selon les conductivités des nanocharges, les nanocomposites polymères diélectriques peuvent être classés en deux types: les nanocomposites polymères diélectriques conducteurs (CDPN) et les nanocomposites polymères diélectriques-diélectriques (DDPN). Cependant, la perte diélectrique élevée accompagnée au voisinage du seuil de percolation pour les CDPN et la charge élevée de nanocharges en céramique entravent le développement de nanocomposites polymères diélectriques à haute performance.Tout d'abord, des nanocomposites ternaires BNNS/CNT/PVDF ont été fabriqués. L'incorporation de BNNS dans les nanocomposites binaires CNT/PVDF a amélioré la dispersion des NTC et optimisé le réseau conducteur. La connexion directe entre les CNT pourrait être entravée en augmentant le contenu de BNNS.Deuxièmement, des hybrides CNT@AC à structure cœur-coquille ont été préparés par méthode CVD. La couche de carbone amorphe entrave non seulement le contact direct des NTC, mais améliore également la dispersibilité des NTC dans la matrice de PVDF. Le seuil de percolation augmente avec la prolongation du temps de dépôt du carbone. Plus important encore, la perte diélectrique a subi une forte diminution après le processus de revêtement. Troisièmement, les hybrides BNNSs@C avec des teneurs en carbone différentes ont été synthétisés par la méthode CVD. La fraction de carbone dans les hybrides BNNSs@C pourrait être ajustée avec précision en contrôlant le temps de dépôt de carbone. Les propriétés diélectriques des nanocomposites BNNSs@C/PVDF pourraient être ajustées avec précision en ajustant la teneur en carbone. Les polarisations interfaciales améliorées des interfaces BNNS/C et C/PVDF ont doté les nanocomposites de performances diélectriques améliorées.Quatrièmement, les hybrides TiO2@C NW structurés en noyau et en coquille ont été synthétisés par une combinaison d'une réaction hydrothermale et du procédé CVD. L'épaisseur de la couche de carbone dans les hybrides TiO2@C NW obtenus pourrait être précisément ajustée en contrôlant le temps de dépôt du carbone. De plus, les propriétés diélectriques des nanocomposites TiO2@C NWs/PVDF pourraient être ajustées avec précision en ajustant l'épaisseur de la coque en carbone. Les polarisations interfaciales améliorées des interfaces TiO2/C et C/PVDF ont doté les nanocomposites d'excellentes performances diélectriques.Enfin, des nanofils structurés de TiO2@C@SiO2 structurés à double coques ont été synthétisés par une combinaison de réactions hydrothermales modifiées, de CVD et de réactions sol-gel. L'introduction de carbone comme enveloppe interne entre le noyau de TiO2 et l'enveloppe externe de SiO2 a induit deux types supplémentaires de polarisation interfaciale. Les nanocomposites de PVDF obtenus avec TiO2@C@SiO2 NWs présentaient simultanément une constante diélectrique améliorée et des caractéristiques de perte diélectrique supprimées. La constante diélectrique et la perte de nanocomposites ont augmenté avec l'augmentation de l'épaisseur de la couche interne de carbone et ont diminué avec l'augmentation de l'épaisseur de la couche externe de SiO2. La relation entre la perte diélectrique et l'épaisseur de l'enveloppe extérieure en SiO2 a été démontrée par les résultats de la simulation finie. / Dielectric polymer nanocomposites with a high dielectric constant and low dielectric loss have received broad interest for use in the field of the electrostatic capacitor and they are usually composed of dielectric polymers as matrix and inorganic or organic nanofillers as the reinforcement. Generally, the improved dielectric performance of nanocomposites is decided by the type and nature of selected polymers and nanofillers as well as interfacial coupling effect between matrices and nanofillers. Among these factors, the physical properties, geometries, component structures of nanofillers play a critical role in deciding the dielectric performance of nanocomposites. According to the conductivities of nanofillers, the dielectric polymer nanocomposites can be classified into two types: conductive-dielectric polymer nanocomposites (CDPNs) and dielectric-dielectric polymer nanocomposites (DDPNs). However, the accompanied high dielectric loss in the vicinity of the percolation threshold for CDPNs and high loading of ceramic nanofillers hinders the development of high performance dielectric polymer nanocomposites.Firstly, ternary BNNSs/CNTs/PVDF nanocomposites were fabricated. The incorporation of BNNSs into the binary CNTs/PVDF nanocomposites improved the dispersion of CNTs and optimized the conductive network, which contributed to the enhanced dielectric constant. The direct connection between CNTs could be hindered by increasing the content of BNNS.Secondly, core-shell structured CNTs@AC hybrids were prepared by CVD method. The amorphous carbon layer not only hindered the direct contact of CNTs but also improved the dispersibility of CNTs in the PVDF matrix. The percolation threshold increased with the prolongation of carbon deposition time. More importantly, the dielectric loss underwent a sharp decrease after the coating process, which was attributed to the decrease in leakage current. The results suggested that the influence of AC interlayer on the final dielectric performance after percolation was much more obvious than that before percolation.Thirdly, BNNSs@C hybrids with different carbon contents were synthesized by the CVD method. The carbon fraction in the BNNSs@C hybrids could be accurately adjusted through controlling the carbon deposition time. The dielectric properties of BNNSs@C/PVDF nanocomposites could be accurately tuned by adjusting the carbon content. The improved interfacial polarizations of BNNSs/C and C/PVDF interfaces endowed the nanocomposites with enhanced dielectric performance.Fourthly, core-shell structured TiO2@C NW hybrids were synthesized by a combination of a hydrothermal reaction and the CVD method. The carbon shell thickness in the obtained TiO2@C NW hybrids could be precisely tuned by controlling the carbon deposition time. The TiO2@C NWs/PVDF nanocomposites exhibited a percolative dielectric behavior. Moreover, the dielectric properties of the TiO2@C NWs/PVDF nanocomposites could be accurately adjusted by tuning the carbon shell thickness. The enhanced interfacial polarizations of the TiO2/C and C/PVDF interfaces endowed the nanocomposites with excellent dielectric performance.Lastly, core@double-shells structured TiO2@C@SiO2 nanowires were synthesized by a combination of modified hydrothermal reaction, CVD, and sol-gel reaction. The introducing of carbon as an inner shell between the TiO2 core and SiO2 outer shell induced two additional types of interfacial polarization. The obtained PVDF nanocomposites with TiO2@C@SiO2 NWs exhibited simultaneously enhanced dielectric constant and suppressed dielectric loss characteristics. The dielectric constant and loss of nanocomposites increased with the increase of carbon inner shell thickness and decreased with the increasing of SiO2 outer shell thickness. The relationship between the dielectric loss and SiO2 outer shell thickness was further demonstrated by the finite simulation results.

Les travaux réalisés dans le cadre de cette thèse ont porté sur la réalisation de polymères conducteurs de type polyaniline et de leurs composites associés à du graphène en vue d’une utilisation en tant que matériaux d’électrodes dans des dispositifs de stockage d’énergie de type supercondensateurs. Les travaux se sont tout d’abord orientés sur la synthèse de nouveaux liquides ioniques protiques (LIP) associant des cations pyrrolidinium (Pyrr+) et imidazolium (Imi+) avec des anions p-toluène sulfonate (PTS-), hydrogénosulfate (HSO4-) ou (+)-camphre-10-sulfonate (Cs-), et de l’étude de leur propriétés physico-chimiques (conductivité, viscosité) dans des mélanges binaires LIP/eau. Après avoir déterminé les formulations permettant d’atteindre les propriétés de transport optimales, les capacitances spécifiques de la Pani/HCl dans ces milieux LIP ont été déterminées et nous avons montré que les performances de dispositifs symétriques sont améliorées en capacitance, énergie et en puissance (400 F/g, 7 Wh.kg-1 et 4 kW.kg-1 pour les valeurs les plus élevées) par rapport à un milieu H2SO4 1M. Ces milieux LIP ont également été utilisés comme milieu de synthèse de la Pani. Nous avons ainsi montré que la nature des LIP, qui sont des milieux nanostructurants, pouvait modifier les propriétés électroniques, morphologiques et thermiques des Pani. Un optimum de conductivité électronique de la Pani (22 S/cm) a été atteint avec une synthèse réalisée dans le mélange binaire [Imi][HSO4]/eau 70/30 (pourcentage massique) générant une morphologie fibrillaire et une bonne cyclabilité (93% de rétention de capacitance sur 1000 cycles dans H2SO4 1M. Des valeurs de près de 400 F/g ont été obtenues dans le mélange [Pyrr][HSO4]/eau 41/59 optimisé. Dans le cas de la synthèse de la Pani réalisée dans [Pyrr][PTS]/eau, un gain en stabilité thermique (360°C) est obtenu grâce au dopage par l’anion PTS-. Finalement, une étude exploratoire sur la préparation de composites Pani/graphène et Pani/oxyde de graphène a été réalisée. Les synthèses des nanocomposites ont été effectuées dans les mélanges LIP/eau. L’optimisation de la composition du composite a été étudiée et indique que des rapports massiques de graphène ou oxyde de graphène d’environ 15% permettent d’atteindre des performances de stockage prometteuses et exaltées par rapport à celles obtenues pour des Pani sans graphène. / The work carried out during this PhD thesis is based on the preparation of conducting polymers such as polyaniline (Pani) and their composites associated with graphene for use as electrode materials for supercapacitors application. This work was first dedicated to the synthesis of new protic ionic liquids (PILs) combining pyrrolidinium (Pyrr+) or imidazolium (Imi+) cations with p-toluene sulfonate (PTS-), hydrogen sulfate (HSO4-) or (+)-camphor-10-sulfonate (Cs-) anion, and the study of their physico-chemicals properties (conductivity, viscosity) in binary mixtures PILs/water. After determining the formulations needed to achieve the optimum of transport properties, the specific capacitance of Pani/HCl in these PILs medium was determined, and we have shown that the performance of symmetrical devices are improved in capacitance, specific energy and specific power (400F/g, 7Wh/kg and 4kW/kg for the higher values) in comparison to those obtained in a H2SO4 1M medium. These PILs mediums were also used as a synthesis medium of Pani. We have shown that the nature of PILs, acting as soft template, could change the electronic, morphological and thermal properties of Pani. An optimum of electronic conductivity of Pani (22 S/cm) was obtained with a synthesis realized in the binary mixture [Imi][HSO4]/water 70/30 generating a fibrillar morphology and a good cyclability (93% capacitance retention over 1000 cycles in H2SO4 1M at 2 A/g). For Pani synthesis in [Pyrr][PTS]/water, a thermal stability gain (360 °C) is obtained thanks to a PTS- doped Pani. Finally, a preliminary study on the preparation of composite Pani/graphene and Pani/graphene oxide was performed. The syntheses of nanocomposites were realized in PILs/water mixtures. The optimization of the composition of the Pani nanocomposites was studied and it was found that a mass ratio of about 15% in weight of graphene or graphene oxide enables to obtain promising nanomaterials with higher electrochemical performances compared with pristine Pani.

Les nanocomposites polymères ont fait l'objet de recherches académiques et industrielles au cours des dernières décennies, du fait de leurs remarquables propriétés mécaniques et rhéologiques comparés aux polymères purs. En particulier, ils présentent du renforcement pour des fractions volumiques modérées, et des effets non linéaires pour des déformations relativement faibles. Malgré des décennies de recherche, la relation entre la rhéologie et la structure des nanocomposites est loin d'être comprise. Les simulations atomistiques peuvent donner une vision détaillée de l'interaction entre la dynamique des chaînes polymères et les charges renforçantes à une échelle locale. Cependant, il est difficile d'aborder les propriétés émergentes à une échelle mésoscopique, par exemple, simuler un grand nombre d'agrégats dans une matrice polymère enchevêtrée reste toujours hors de portée. Dans ce travail, nous proposons un modèle mésoscopique pour simuler la rhéologie des nanocomposites avec un fluide simple ou une matrice polymère enchevetrée, en utilisant la dynamique brownienne et la dynamique généralisée de Langevin, respectivement. Dans les deux dynamiques, le mouvement des chaines de polymère n'est pas décrit de façon explicite et son effet sur la dynamique de la charge est «moyenné». En utilisant ce modèle, nous étudions l'influence du type de charge, de leur taille, morphologie, et fraction volumique sur la rhéologie du composite modèle, ainsi que la morphologie des charges dans les simulations. Un cas particulièrement intéressant est celui d'agrégats quasi-fractals, qui peuvent être flexibles ou bien rigides. Nous démontrons que les systèmes avec agrégats présentent un renforcement significatif, qui augmente avec la taille des agrégats, leur rigidité, leur fraction volumique et leur polydispersité en taille. Une relaxation lente est également mise en évidence, et nous montrons qu'elle est liée à la rotation lente des agrégats. L'effet Payne, associé à la réponse non linéaire des modules dynamiques avec l'amplitude de déformation de cisaillement, est également observé pour nos modèles de composites. Nous faisons le lien entre l'arrangement microscopique des charges sous cisaillement et les propriétés macroscopiques du composite / Polymer nanocomposites have drawn a lot of attention both from the academic and industrial research in the last decades, thanks to their remarkable mechanical and rheological properties as compared to pure polymers. In particular, they may display reinforcement for moderate volume fractions, and several non linear effects that appear for small deformation amplitudes. In spite of decades of research, the relation between nanocomposites structure and rheology is far from being understood. Atomistic simulations can give a detailed view of the interplay between polymer chains dynamics and fillers at a local scale. However, it is much more difficult to address the properties emerging at a mesoscopic scale, for instance, to simulate a large number of aggregates in an entangled polymeric matrix remains out of reach. In this work, we build a mesoscopic model to simulate the rheology of polymer nanocomposites with a simple fluid and an entangled polymer matrix, by using the Brownian dynamics and the generalized Langevin dynamics, respectively. In both cases, the motion of the polymer chains is not explicitly described and its effect on the filler dynamics is "averaged out". Using this model, we quantitatively determine the influences of the filler type, the filler volume fraction, size and morphology on the rheology of the model composite. Of particular interest is the case of fractal-like aggregates, which may be flexible or rigid. We demonstrate that model aggregates display significant reinforcement, which increases with the aggregate size, aggregate rigidity, filler volume fraction and polydispersity. Long relaxation times are also evidenced, which are related to the slow rotation of the aggregates. The well-known Payne effect, associated to the nonlinear response of the dynamic moduli with the shear deformation amplitude, is also seen in our model composites. We relate the behavior of microscopic filler to the macroscopic properties of the composite

Environmental concerns arising from the use of non-degradable plastics have resulted in search for suitable substitutes. The thesis deals with new nanostructured composites based on reinforcement of nanocellulose whiskers in "green" polymers such as xylan. Since the reinforcement filler and the matrix are both biobased and are thereby environmental friendly. Xylan incorporated with cellulose whiskers films provided with improved water and oxygen barrier properties. It appears that the high degree of crystallinity of cellulose whiskers, dense composite structure formed by the whiskers and rigidly hydrogen-bonded cellulose whiskers can cause cellulose whiskers to form integrated matrix which contribute to substantial benefit in the overall reduction of transmission rate. The spectral data obtained for the NCW/xylan nanocomposite films showed that the amount of xylan adsorbed to cellulose increases with the addition of NCW in the matrix. In addition, NMR T2 relaxation experiments studies were conducted to investigate the change in the nature of carbohydrate-water interactions as a result of NCW incorporation. These results facilitated an improved understanding of the mechanisms involved in the superior barrier and mechanical properties of xylan-whisker nanocomposite films. XRD studies show that when a xylan-whisker nanocomposite films is formed the mixing occurs on the atomic scale and NCW loading increases the matrix crystallinity.

This research is directed toward understanding the effect of nanoparticle attributes and polymer morphology on the properties of the nanocomposites with analogous nanoparticle chemistry. In order to develop this understanding, polymer nanocomposites containing calcium phosphate nanoparticles of different specific surface areas and shapes were fabricated and characterized through thermal and thermomechanical techniques. Nanoparticles were synthesized using reverse microemulsion technique. For nanocomposites with different surface area particles, the mobility of amorphous polymer chains was restricted significantly by the presence of particles with an interphase network morphology at higher loadings. Composites fabricated with different crystallinity matrices showed that the dispersion characteristics and reinforcement behavior of nanoparticles were governed by the amount of amorphous polymer fraction available. The study conducted on the effect of nanoparticle shape with near-spherical and nanofiber nanoparticles illustrated that the crystallization kinetics and the final microstructure of the composites was a function of shape of the nanoparticles. The results of this research indicate that nanoparticle geometry and matrix morphology are important parameters to be considered in designing and characterizing the structure-property relationship in polymer nanocomposites.

Si-based anodes have recently received considerable attention for use in Li-ion batteries, due to their extremely high specific capacity - an order of magnitude beyond that offered by conventional graphite anode materials. However, during the lithiation process, Si-based anodes undergo extreme increases in volume, potentially by more than 300 %. The stresses produced within the electrode by these volume changes can damage the electrode binder, the active Si particles and the solid electrolyte interphase (SEI), causing the electrode to rapidly fail and lose capacity. These problems can be overcome by producing new anode materials incorporating both Si and C, which may offer a favorable combination of the best properties of both materials, and which can be designed with internal porosity, thereby buffering the high strains produced during battery charge and discharge with minimal overall volume changes. However, in order to develop useful anode materials, we must gain a thorough understanding of the structural, microstructural and chemical changes occurring within the electrode during the lithiation and delithiation process, and we must develop new processes for synthesizing composite anode particles which can survive the extreme strains produced during lithium intercalation of Si and exhibit no volume changes in spite of the volume changes in Si. In this work we have developed several novel synthesis processes for producing internally porous Si-C nanocomposite anode materials for Li-ion batteries. These nanocomposites possess excellent specific capacity, Coulombic efficiency, cycle lifetime, and rate capability. We have also investigated the influence of a range of different parameters on the electrochemical performance of these materials, including pore size and shape, carbon and silicon film thickness and microstructure, and binder chemistry.

In the past two decades polymer/clay nanocomposites (PCNs) have emerged as promising materials that exhibit remarkably improved properties when compared to conventional composites and pristine polymers. Such improvements strongly depend on the dispersion of clay nanoparticles in the polymer matrix. In spite of great efforts expended in characterizing clay dispersion, effective, simple and quantitative techniques are still needed. This work addresses this challenge by presenting new aspects of 1H solid-state NMR for quantifying clay dispersion in PCNs filled with clay containing paramagnetic ions. Employing these 1H solid-state NMR methods, some structure-processing-deformation relationships of PCNs were derived, and basic insights into nuclear relaxation and spin diffusion in PCNs were gained as well. Detailed models and analyses were described for 1H spin-lattice relaxation in the presence of paramagnetic clays in PCNs. Relaxation recovery was analytically correlated to clay dispersion in two ways: one is the initial relaxation recovery which is related to clay surface area, and the other is the spin-lattice relaxation time which is related to interparticle spacing. These two NMR observables were employed to quantitatively observe the evolution of clay morphology in poly(propylene)/clay (PP/MMT) nanocomposites upon equibiaxial stretching, as well as upon in situ uniaxial deformation. The initial relaxation recovery was independently utilized to determine the polymer-clay interfacial surface area and the degree of clay exfoliation. We demonstrated the capabilities of our models in quantitatively characterizing several materials, including poly(vinyl alcohol), nylon 6, poly(å-caprolactone) (PCL), poly(lactic acid) (PLA) and PP nanocomposites. These results were used to examine the dependence of clay morphology upon processing (strain ratio, strain rate, temperature), deformation (extension), component characteristics (polymer molecular weight, clay surface modification) and clay content. Effects of paramagnetic Fe3+ concentration and external magnetic field strength on 1H spin-lattice relaxation in PCNs were also investigated and discussed. In particular, low field separates the initial relaxation recovery into two stages: one related to clay content and the other related to the polymer-clay interfacial surface area. The low field was observed to enhance the paramagnetic contribution to the spin-lattice relaxation rate, increasing its sensitivity to clay morphology. In addition, measurements of long-distance spin diffusion coefficients for a variety of polymers and paramagnetic characteristics of organically modified clay were explored. Overall, the utility of NMR relaxometry in characterizing PCNs has been significantly expanded and successfully demonstrated in this dissertation.