Es besteht enormes Interesse den Stofftransport in nanoskaligen Systemen zu verstehen und selektiv zu steuern, um analytische und synthetische Anwendungen zu entwickeln, aber auch um die physiologischen Prozesse lebender Zellen zu entschlüsseln. Im Rahmen dieser Arbeit wurde der Einfluss der elektrochemischen Doppelschicht an ausgewählten nanoskaligen Elektrolytsystemen untersucht. Die Gleichrichtung von Ionenströmen (engl. Ionic Current Rectification ICR) in Nanoporen mit einer Oberflächenladung äußert sich in einer gekrümmten Strom-Spannungs-Kurve. Die Überlappung von innerem und äußerem Potential ist dabei hinsichtlich der Ionenverteilung und somit der Porenleitfähigkeit einander verstärkend oder gegenläufig. Auf Grundlage dieses Mechanismus wurde die Gleichrichtung bei einem sehr großen Verhältnis von Porenöffnung zu Debye-Länge erklärt. Ferner wurde mittels der eingeführten relativen Leitfähigkeit κ´ die verschiedenen Leitfähigkeitszustände in Abhängigkeit der Elektrolytkonzentration und Temperatur sichtbar gemacht und Implikationen für Sensoranwendungen wie z.B. dem resistiven Pulszähler zur Partikelanalyse abgeleitet. Es wurde ein numerisches Modell basierend auf dem Poisson-Nernst-Planck-Gleichungssystem entwickelt, um die Translokation eines Nanopartikels durch eine konische Nanopore bei einer geringen Leitsalzkonzentration zu beschreiben. Neben dem klassischen Volumenausschluss-Effekt tritt zusätzlich ein Gleichrichtungseffekt (ICR-Effekt) in der Pore auf. Eine Analyse zur Entflechtung von Partikelgröße und Partikelladung aus der Pulshöhe und Pulsform wurde erfolgreich durchgeführt. Wie der Stofftransport durch eine Oberflächenladung auf dem umgebenden Material einer Nanoelektrode beeinflusst wird, wurde anhand des voltammetrischen Verhaltens diskutiert. An sehr kleinen Elektroden (< 10 nm) ist demnach der Einfluss der elektrochemischen Doppelschicht auf die Strom-Spannungs-Kurve besonders groß und kann auch bei Vorliegen eines hohen Leitsalzüberschusses nicht vernachlässigt werden. In leitsalzfreien Elektrolyten sind die gefundenen Effekte so deutlich, dass sie auch an größeren Elektroden experimentell zweifelsfrei festgestellt worden sind. / There is an enormous interest in understanding and selectively controlling the material transport in nanoscale systems to develop analytical and synthetic applications, but also to decipher the physiological processes of living cells. Within this thesis, the influence of the electrochemical double layer on selected nanoscale electrolyte systems was studied. Ionic Current Rectification (ICR) in nanopores carrying a surface charge manifests itself in a non-linear current-voltage-curve. The overlap of interior and exterior potential is cumulative or opposing with regard to the ion distribution and therefore the pore conductivity. Based on this mechanism, ICR for very large ratios of pore size and Debye length was explained. Furthermore, the different conducting states as a function of electrolyte concentration and temperature were visualized by introducing the relative conductivity κ´ and hence implications for sensor applications such as the resistive pulse sensor have been deduced. A numerical model based on the Poisson-Nernst-Planck-equations was developed to describe the translocation of a nanoparticle through a conical nanopore at a low electrolyte concentration. An additional rectification effect (ICR effect) occurs in the pore beside the conventional volume exclusion effect. An analysis was successfully performed to deconstruct the particle size and particle charge from the pulse height and shape. The material transport is affected by a surface charge on the shrouding material of nanoelectrodes as it was discussed by means of the voltammetric behaviour. The influence of the electrochemical double layer on the current-voltage-curve is particularly large at very small electrodes (< 10 nm) and cannot be neglected even at a high excess of supporting electrolyte. The observed effects were pronounced in unsupported electrolytes, so that they could be clearly detected experimentally at even larger electrodes.

Voltage-driven translocation, the core concept of nanopore sensing for biomolecules, has been extensively studied in silico and in vitro over the past two decades. However, the theories of analyte capture are still not complete due to the complex dynamics resulting from the coupling of multiple physical processes such as di usion, electrophoresis, and electroosmotic flow. In this thesis, I build and design translocation simulations for analytes ranging from point-like particles to rod-like molecules and long flexible polymers. The primary goal is to test, clarify and complete the existing capture theories. For example, we revisit and revise the existing definitions of the capture radius, clarify the concept of depletion zones, and investigate the impacts of the flat field near the pore. Earlier theories of translocation underestimate the importance of the electric field out- side the nanopore. In our work, we analyze the non-equilibrium dynamics during the cap- ture process originating from the converging field lines, i.e., rod orientation and polymer deformation. We characterize the rod orientation and quantify its impact on capture time both with and without Electrohydrodynamic interactions. We investigate the polymer chain deformation and calculate the translocation time by taking the electric field outside the nanopore into account as opposed to the conventional simulation approaches. Besides nanopore sensing, there are many undiscovered possibilities for nanopore trans- location technologies. We test two proof-of-concept ideas in which we suggest to use capture and translocation to separate molecules of di erent physical properties. For example, we show how one could selectively capture particles sharing the same mobility but di erent di usion coe cients using a pulsed field. Moreover, we demonstrate that it is possible to build a ratchet using pulsed fields and a nanopore to change the concentration ratios of a polymer mixture of different sized polyelectrolytes.

La translocation de biopolymères à travers un nanopore intervient dans de nombreux processus biologiques et technologiques, comme le transport nucléocytoplasmique dans le pore nucléaire des cellules eucaryotes, la sécrétion de protéines, le séquençage rapide de l’ADN ou l’électrophorèse capillaire.Nous proposons une technique optique en molécule unique originale pour l’étude de la translocation de biopolymères à travers un nanopore basée sur l’effet Zero-Mode Waveguide. Nous nous sommes intéressés au passage d’ADN double-brin de plusieurs tailles, d’ADN simple-brin et d’ARN, entraînés par un flux à travers une membrane nanoporeuse track-etched. Nous montrons qu’il existe un flux critique régissant le passage des biopolymères indépendant du rayon des pores ainsi que de la taille des biopolymères et de leur nature, conformément aux prédictions théoriques de Brochard et de Gennes.Le pore nucléaire est un nanopore biologique responsable du transport sélectif entre le noyau et lecytoplasme des cellules. Nous avons étudié l’influence de la concentration en importinBeta1 – une protéine nécessaire au transport nucléocytoplasmique – sur l’organisation du canal central du pore nucléaire deXenopus laevis en mesurant la diffusion de molécules de Dextran fluorescentes à travers celui-ci. Nous observons une ouverture du canal central à basse concentration suivi d’un rétrécissement de celui-ci à plus forte concentration. Cette évolution du rayon du canal central avec la concentration en importin Beta1est conforme aux modèles en champ moyen de Opferman et coll. et de Ando et coll. et aux observations expérimentales sur des systèmes reconstitués in vitro de Lim et coll. et Zahn et coll. / The translocation of biopolymers through a nanopore is a feature common to many biological andtechnological processes such as the nucleocytoplasmic transport through the nuclear pore complex(NPC), protein secretion, fast DNA sequencing or capillary electrophoresis.We have developed an original single molecule optical detection technique for the study of biopolymerstranslocation through a nanopore based on the Zero-Mode Waveguide effect. We studied thepassage of double stranded DNA of different sizes, of single stranded DNA and of double-stranded RNAdriven by a flux through track-etched nanoporous membranes. We demonstrate that translocation isgoverned by a critical flux independent of both biopolymer size and nature and of the pore radius inagreement with the theoretical predictions of Brochard and de Gennes.The NPC is a biological nanopore responsible for the selective transport between cytoplasm andnucleus in cells. We studied the influence of importinBeta1 concentration – a protein involved in the nucleocytoplasmictransport – on the structure of the central channel of the NPC of Xenopus laevis byassessing the diffusion of fluorescently labeled Dextran molecules through the NPC. We observe anopening of the central channel at low concentration followed by a shrinking at higher concentrationin importinBeta1 in agreement with mean-field models from Opferman et al. and Ando et al. and withexperiments on biomimetic in vitro systems from Lim et al. and Zahn et al.

Das Schicksal einer differenzierten Zelle wird durch epigenetische Grenzen bestimmt und mittels Schutzmechanismen bewahrt, wodurch die Reprogrammierung in andere Zelltypen verhindert wird. In dieser Studie haben wir ein Chromatin-regulierendes Protein, das konservierte MORF4-Verwandte-Gen (MRG) Protein MRG-1, als Barriere für die Reprogrammierung von Zellen in Caenorhabditis elegans (C. elegans) identifiziert. RNAi gegen MRG-1 ermöglicht es uns Keimzellen mittels Überexpression des Neuronen-induzierenden Transkriptionsfaktors CHE-1 in neuronenartige Zellen umzuwandeln. Mittels ChIP-seq fanden wir heraus, dass MRG-1 unterschiedliche DNA Bindungsstellen in den Keimbahnen und somatischen Geweben von C. elegans aufweist. Wir konnten zeigen, dass MRG-1 besonders stark am Genkörper angereichert ist und sich hauptsächlich auf Genen befindet, welche die aktive Histonmarkierung H3K36me3 tragen. Die Charakterisierung der Protein-Protein-Interaktionspartner von MRG-1 mittels Co-IP/MS ergab, dass MRG-1 mit der Histon-H3K9-Methyltransferase SET-26 und der b-gebundenen N-Acetylglucosamin Transferase OGT-1 zusammenarbeitet, um die Umwandlung von Keimzellen in Neuronen zu verhindern. Basierend auf RNA-Seq Experimenten in mrg-1-Mutanten und Wildtyp konnten wir weitreichende Veränderungen der Genexpression mit Auswirkung auf Signalwege wie den Notch Signalweg enthüllen, welcher bekanntermaßen die Zelltyp-Reprogrammierung fördern. Mittels Long-Read basiertem RNA-seq in mrg-1-Mutanten und der Integration entsprechender ChIP-seq Daten habe ich die Beteiligung von MRG-1 am prä-mRNA-Spleißen in C. elegans gezeigt, analog zum Säugetierortholog MRG15. Diese Ergebnisse weisen darauf hin, dass MRG-1 durch die Regulierung des Chromatins und die Sicherstellung des korrekten Spleißens die Expressionsniveaus kritischer Gene und Signalwege aufrechterhält, um eine ordnungsgemäße Keimbahnentwicklung zu gewährleisten und das Schicksal der Keimzellen zu schützen. / Das Schicksal einer differenzierten Zelle wird durch epigenetische Grenzen bestimmt und mittels Schutzmechanismen bewahrt, wodurch die Reprogrammierung in andere Zelltypen verhindert wird. In dieser Studie haben wir ein Chromatin-regulierendes Protein, das konservierte MORF4-Verwandte-Gen (MRG) Protein MRG-1, als Barriere für die Reprogrammierung von Zellen in Caenorhabditis elegans (C. elegans) identifiziert. RNAi gegen MRG-1 ermöglicht es uns Keimzellen mittels Überexpression des Neuronen-induzierenden Transkriptionsfaktors CHE-1 in neuronenartige Zellen umzuwandeln. Mittels ChIP-seq fanden wir heraus, dass MRG-1 unterschiedliche DNA Bindungsstellen in den Keimbahnen und somatischen Geweben von C. elegans aufweist. Wir konnten zeigen, dass MRG-1 besonders stark am Genkörper angereichert ist und sich hauptsächlich auf Genen befindet, welche die aktive Histonmarkierung H3K36me3 tragen. Die Charakterisierung der Protein-Protein-Interaktionspartner von MRG-1 mittels Co-IP/MS ergab, dass MRG-1 mit der Histon-H3K9-Methyltransferase SET-26 und der b-gebundenen N-Acetylglucosamin Transferase OGT-1 zusammenarbeitet, um die Umwandlung von Keimzellen in Neuronen zu verhindern. Basierend auf RNA-Seq Experimenten in mrg-1-Mutanten und Wildtyp konnten wir weitreichende Veränderungen der Genexpression mit Auswirkung auf Signalwege wie den Notch Signalweg enthüllen, welcher bekanntermaßen die Zelltyp-Reprogrammierung fördern. Mittels Long-Read basiertem RNA-seq in mrg-1-Mutanten und der Integration entsprechender ChIP-seq Daten habe ich die Beteiligung von MRG-1 am prä-mRNA-Spleißen in C. elegans gezeigt, analog zum Säugetierortholog MRG15. Diese Ergebnisse weisen darauf hin, dass MRG-1 durch die Regulierung des Chromatins und die Sicherstellung des korrekten Spleißens die Expressionsniveaus kritischer Gene und Signalwege aufrechterhält, um eine ordnungsgemäße Keimbahnentwicklung zu gewährleisten und das Schicksal der Keimzellen zu schützen.

The precise introduction of nonplanar pores in the backbone of graphene nanoribbon represents a great challenge. Here, we explore a synthetic strategy toward the preparation of nonplanar porous graphene nanoribbon from a predesigned dibromohexabenzotetracene monomer bearing four cove-edges. Successive thermal annealing steps of the monomers indicate that the dehalogenative aryl-aryl homocoupling yields a twisted polymer precursor on a gold surface and the subsequent cyclodehydrogenation leads to a defective porous graphene nanoribbon containing nonplanar [14]annulene pores and five-membered rings as characterized by scanning tunneling microscopy and noncontact atomic force microscopy. Although the C–C bonds producing [14] annulene pores are not achieved with high yield, our results provide new synthetic perspectives for the on-surface growth of nonplanar porous graphene nanoribbons.

In the past decade, DNA origami self-assembly has been widely applied for creating customised nanostructures with base-pair precision. In this technique, the unique chemical addressability of DNA can be harnessed to create programmable architectures, using components ranging from dye or protein molecules to metallic nanoparticles. In this thesis, we apply DNA nanotechnology for developing novel light-harvesting and optical voltage sensing nano-devices. We use the programmable positioning of dye molecules on a DNA origami plate as a mimic of a light-harvesting antenna complex required for photosynthesis. Such a structure allows us to systematically analyse optimal design concepts using different dye arrangements. Complementary to this, we use the resistive-pulse sensing technique in a range of electrolytes to characterise the mechanical responses of DNA origami structures to the electric field applied. Based on this knowledge, we assemble voltage responsive DNA origami structures labelled with a FRET pair. These undergo controlled structural changes upon application of an electric field that can be detected through a change in FRET efficiency. Such a DNA-based device could ultimately be used as a sensitive voltage sensor for live-cell imaging of transmembrane potentials.

GaN nanopore arrays with pore diameters of approximately 75 nm were fabricated by inductively coupled plasma etching (ICP) using anodic aluminum oxide (AAO) films as etch masks. Nanoporous AAO films were formed on the GaN surface by evaporating an Al film onto a GaN epilayer and subsequently anodizing the aluminum. To minimize plasma-induced damage, the template was exposed to CF4-based plasma conditions. Scanning electron microscopy (SEM) analysis shows that the diameter and the periodicity of the nanopores in the GaN were directly transferred from the original anodic alumina template. The pore diameter in the AAO film can be easily controlled by tuning the anodization conditions. Atomic force microscopy (AFM), photoluminescence (PL) and micro-Raman techniques were employed to assess the quality of the etched GaN nanopore surface. Such a cost-effective method to produce nano-patterned GaN template would be useful for growth and fabrication of III-Nitrides based nanostructures and photonic band gap materials. / Singapore-MIT Alliance (SMA)

DNA nanotechnology has revolutionised our capability to shape and control three-dimensional structures at sub-nanometre length scales. In this thesis, we use DNA to build synthetic membrane-inserting channels. Porphyrin and cholesterol tags serve as membrane anchors to facilitate insertion into the lipid membrane. With atomic force microscopy, confocal imaging and ionic current recordings we characterise our DNA nanochannels that mimic their natural protein-based counterparts in form and function. We find that they exhibit voltage-dependent conductance states. Amongst other architectures, we create the largest man-made pore in a lipid membrane to date approaching the electrical diameter of the nuclear pore complex. Pushing the boundaries on the other end of the spectrum, we demonstrate the ultimately smallest DNA membrane pore made from a single membrane-spanning DNA duplex. Thereby, we proof that ion conduction across lipid membranes does not always require a physical channel. With experiments and MD simulations we show that ions flow through a toroidal pore emerging at the DNA-lipid interface around the duplex. Our DNA pores spanning two orders of magnitude in conductance and molecular weight showcase the rational design of synthetic channels inspired by the diversity of nature - from ion channels to porins.

The use of the MinION sequencer (Oxford Nanopore) was tested on samples prepared to simulate infectious samples. The tested procedure is to simulate work with a sample with an unknown pathogen. Therefore, a metagenomic approach was chosen. Three kits were tested: Rapid Barcoding Sequencing, PCR Barcoding and Premium whole genome amplification. Each kit differed in duration, difficulty to prepare and in amplification of nucleic acids. In total it was chosen eight viruses with different genome lengths and with varying types of the genome (5,6 - 152 kb, ss/ds RNA, dsDNA). Ten samples were prepared to simulate different types of infection (respiratory, gastrointestinal tract and urine), and one sample contained pure water as a negative control. Before preparation of the library with Oxford Nanopore's kits, DNase/RNase treatment was used. The viral RNA was transcribed into DNA and in chosen samples were amplificated to reach a higher concentration of nucleic acids. Rapid barcoding sequencing kit detected all selected viruses with the highest number of viral reads (4403) with a length between 100 and 250 nt and quality coverage of viral genomes. PCR Barcoding kit detected five out of eight viruses, and the number of identified reads with a length of 100-200 nt distinctly decreased. Premium whole genome...

The genus Rhodotorula includes basidiomycetous oleaginous yeast species. Rhodotorula babjevae can produce compounds of biotechnological interest such as lipids, carotenoids, and biosurfactants from low value substrates such as lignocellulose hydrolysate. High-quality genome assemblies are needed to develop genetic tools and to understand fungal evolution and genetics. Here, we combined short- and long-read sequencing to resolve the genomes of two R. babjevae strains, CBS 7808 (type strain) and DBVPG 8058, at chromosomal level. Both genomes are 21 Mbp in size and have a GC content of 68.2%. Allele frequency analysis indicates that both strains are tetraploid. The genomes consist of a maximum of 21 chromosomes with a size of 0.4 to 2.4 Mbp. In both assemblies, the mitochondrial genome was recovered in a single contig, that shared 97% pairwise identity. Pairwise identity between most chromosomes ranges from 82 to 87%. We also found indications for strain-specific extrachromosomal endogenous DNA. A total of 7591 and 7481 protein-coding genes were annotated in CBS 7808 and DBVPG 8058, respectively. CBS 7808 accumulated a higher number of tandem duplications than DBVPG 8058. We identified large translocation events between putative chromosomes. Genome divergence values between the two strains indicate that they may belong to different species.