Ce travail, effectué dans le cadre d’une collaboration entre l’IPN d’Orsay et EDF, contribue aux études destinées à améliorer la compréhension du comportement des radioéléments en production (centrale en fonctionnement) et à l’aval du cycle électronucléaire (stockage géologique profond des déchets). Le comportement et l’évolution des radioéléments sont fortement dépendants des interactions aux interfaces eau / surface minérale, phénomènes complexes et souvent difficiles à caractériser in situ (en particulier, dans le cas du circuit primaire des centrales REP). La dynamique moléculaire basée sur la théorie de la fonctionnelle de la densité apporte des éléments de compréhension sur l’évolution des structures d’équilibre en prenant en compte explicitement la solvatation et les effets de la température sur les mécanismes d’interaction. Dans un premier temps, le comportement de l’ion uranyle en solution et à l’interface d’un système modèle eau / TiO2 à température ambiante a été simulé et validé par la confrontation avec des résultats expérimentaux et des calculs de DFT statiques. Dans un deuxième temps, cette approche a été employée sur ce même système, à des fins prédictives, pour étudier l’effet d’une élévation de la température. La rétention de l’ion augmente avec la température en accord avec les données expérimentales obtenues sur d’autres systèmes, et conduit également à une modification du complexe de surface. Dans un troisième temps, une étude similaire a été effectuée à l’interface eau / NiO, produit de corrosion présent dans le circuit primaire des centrales nucléaires, pour lequel peu de données expérimentales sont disponible actuellement. / This study, performed within the framework of an EDF and IPN of Orsay partnership, contributes to the studies intended to improve the understanding of the radioelement behaviour in service (nuclear power plant) and at the end of the uranium fuel cycle (deep geologic repository). The behaviour and the evolution of radioelement depend mainly on the interactions at the water / mineral interfaces, which are complex and often difficult to characterize in situ (in particular, in the PWR primary circuit). Molecular dynamic simulations based on the Density Functional Theory provide some insight to understand the evolution of the structures against the solvation and the effects of the temperature on the interaction mechanisms. At first, the behaviour of the uranyl ion at room temperature in solution and at the water / TiO2 interface, as a system model, has been studied and validated by the systematic comparisons with the experimental and static DFT calculations data. Secondly, this approach was used on the same system, in predictive purposes, to study the effect of a temperature rise. The retention of the ion increases with the temperature in agreement with the experimental data obtained on other systems, and led also to a modification of the surface complex. Finally, a similar study has been performed at the water / NiO interface, which corresponds to a corrosion product present in the primary circuit of nuclear power plants, but for which few experimental data are currently available.

The scope of this thesis is in the time-dependent formulation of the two dimensional model of resonant electron-diatomic molecule collisions in the range of low energies. In its time independent form the model was previously numerically solved without the Born-Oppenheimer approximation with use of modern tools such as the finite element method with discrete variable representation (FEM-DVR) or exterior complex scaling (ECS). Within the scope of this model we numerically solve the evolution problem, with use of the Crank-Nicolson method and the Padé approximation. Later we evaluate the cross section of the elastic and some inelastic processes with the correlation function approach. At last we make a comparison of the evolution and the cross sections to time dependent formulation of the local complex potential approximation of the electron-molecule collisions.

L'approximation de Born-Oppenheimer consiste à traiter de manière semi-classique l'équation de Schrödinger associée à une molécule en utilisant la petitesse du rapport de masse entre électrons et noyaux. Nous montrons que pour un type générique de presque croisement de codimension 1 de deux surfaces d'énergie électroniques, la propagation d'un paquet d'ondes nucléaire gaussien associé à l'une des surfaces est gouvernée par une formule du type Landau-Zener. Par ailleurs, dans le cadre de l'équation de Schrödinger stationnaire unidimensionnelle et en situation de croisement générique de deux courbes d'énergie, nous construisons des quasimodes par intégration d'un paquet d'ondes gaussien propagé le long d'une trajectoire classique périodique associée à l'une des deux courbes d'énergie.

The fully quantum mechanical 'direct-potential-fit' (DPF) method has become increasingly widely used in the reduction of diatomic spectra. The central problem of this method is the representation of the potential energy and Born-Oppenheimer breakdown (BOB) correction functions. There are a number of problems associated with the existing method and potential forms. This thesis delineates these problems and finds solutions to some of them. In particular, it is shown that use of a different expansion variable and a new treatment of some of the expansions resolves most of the problems. These techniques have been successfully tested on the ground electronic states of the coinage metal hydrides and the Rb2 molecule. To address the problem of representing 'barrier' potential curves, a flexible new functional form, the 'double-exponential long-range' (DELR) potential function, is introduced and applied to the B barrier state of Li2. In addition, the Lambda-doubling level splitting which occurs for singlet Pi electronic states has been taken into account by extending the effective Schrodinger equation. The computer program DSPotFit developed in our laboratory for performing DPF analyses has been extended to incorporate the ability to fit the analytical potential energy functions to tunneling predissociation line widths for quasibound levels. Finally, an attempt is made to investigate whether there exists a hump in the ground state rotationless potential curve of beryllium hydride.

The fully quantum mechanical 'direct-potential-fit' (DPF) method has become increasingly widely used in the reduction of diatomic spectra. The central problem of this method is the representation of the potential energy and Born-Oppenheimer breakdown (BOB) correction functions. There are a number of problems associated with the existing method and potential forms. This thesis delineates these problems and finds solutions to some of them. In particular, it is shown that use of a different expansion variable and a new treatment of some of the expansions resolves most of the problems. These techniques have been successfully tested on the ground electronic states of the coinage metal hydrides and the Rb2 molecule. To address the problem of representing 'barrier' potential curves, a flexible new functional form, the 'double-exponential long-range' (DELR) potential function, is introduced and applied to the B barrier state of Li2. In addition, the Lambda-doubling level splitting which occurs for singlet Pi electronic states has been taken into account by extending the effective Schrodinger equation. The computer program DSPotFit developed in our laboratory for performing DPF analyses has been extended to incorporate the ability to fit the analytical potential energy functions to tunneling predissociation line widths for quasibound levels. Finally, an attempt is made to investigate whether there exists a hump in the ground state rotationless potential curve of beryllium hydride.

A constante emissão de CO2 na atmosfera devido a fontes antropogênica despertou uma preocupação crescente em função da sua atuação no efeito estufa. Um número crescente de metodologias para redução da concentração deste gás na atmosfera vem sendo proposta e uma alternativa atrativa é a da inserção do CO2 em anéis epóxidos para formação de carbonatos cíclicos. Apesar de já existirem inúmeros trabalhos a respeito destas reações, o mecanismo pelo qual elas ocorrem não está completamente esclarecido. Neste trabalho é apresentado o estudo mecanístico da cicloadição de CO2 em diferentes epóxidos catalisada por líquidos iônicos haletos de alquil-imidazólios, CnMIm X (n = 1, 2, 3, 4 e X = Cl, Br, I), através da Teoria do Funcional da Densidade empregando-se o funcional !B97X-D e o conjunto de base 6-31G(d,p) e LanL2DZ (somente para o I). Propuseram-se duas rotas distintas para o mecanismo, uma composta por três etapas e outra composta por somente duas etapas. Ambas as rotas tiveram a primeira etapa como sendo a mais energética e correspondendo à abertura do anel epóxido e mostraram ser competitivas entre si energeticamente. Esta etapa mostrou depender de ambos cátion e ânion do catalisador para ocorrer, onde uma ligação de hidrogênio não clássica com o H2 do imidazólio aparece no estado de transição. Verificou-se que no geral a energia de ativação da reação diminui com o aumento da cadeia alquílica do cátion imidazólio assim como diminui com o aumento do caráter nucleofílico do haleto (Cl > Br > I). O substituinte do anel epóxido também exerce influência sobre a energia de ativação da reação, porém não há uma tendência bem definida. Constatou-se que o sítio mais favorável para ataque nucleofílico é o carbono não substituído do anel epóxido tanto pela diferença de energia quanto por análise de índices de reatividade de Fukui e de interações não covalentes. Uma análise de 14 funcionais da densidade e do método perturbativo de segunda ordem MP2 em comparação ao método composto G4MP2 revelaram a forte dependência das energias de ativação com o método empregado. Através de cálculos de dinâmica molecular clássica foi possível estudar dinamicamente o sistema brometo de 1-butil-3-metil imidazólio, o óxido de estireno e o CO2 e notou-se a formação de duas fases com a presença de uma interface. Adicionalmente, observou-se que a probabilidade da reação ocorrer no bulk do líquido iônico é maior, pois a proporção catalisador/substrato é maior nesta região. Por meio da dinâmica molecular de Born-Oppenheimer constatou-se que o anel epóxido também pode ser ativado através de interações com os hidrogênios H4 e H5 do anel imidazólio. / The constant emission of CO2 into the atmosphere due to anthropogenic sources has generated a growing concern regarding the greenhouse effect. Many methodologies to reduce the atmospheric CO2 concentration have been proposed and an alternative is the insertion of CO2 into epoxides to form cyclic carbonates. Although there are a lot of studies in this area, the reaction mechanism by which they occur is still unclear. In this work the cycloaddition mechanism of CO2 into different epoxides catalyzed by alkyl-imidazolium halide ionic liquids, CnMIm X (n = 1, 2, 3, 4 e X = Cl, Br, I), is presented. Density Functional Theory in conjunction with the functional !B97X-D and 6-31G(d,p) and LanL2DZ (for I atoms) basis sets were employed. Two distinct routes were proposed for the mechanism: one composed of three steps and another composed by only two steps. Both routes showed that the first step regarding the epoxide ring opening is the determined one and they are energetically competitive with each other. This step depends on both cation and anion from the catalyst to proceed through a non-classical hydrogen bond in the transition state. It was found that the activation energy decreases with the chain length of the alkyl group from the imidazolium ring as well as with the nucleophilic character of the halide (Cl > Br > I). The epoxide ring substituent also exerts influence on the activation energy of this reaction, but there is no well defined behaviour. The most favourable site for nucleophilic attack is the non-substituted epoxide ring carbon as was shown by the reaction energy difference and through reactive Fukui index and non-covalent interaction (NCI) analysis. 14 exchange-correlation density functionals were investigated and compared to the well established second order perturbation theory (MP2) method and G4MP2 composite method. One found out that the activation energies strongly depends on the chosen method. Through classical molecular dynamics it was possible to study the system 1-butyl-3-methyl-imidazolium bromide together with styrene oxide and CO2 e the formation of two phases with the presence of an interface was observed. Additionally, it was shown that the probability of the reaction to occur in the ionic liquid bulk is bigger because the catalyst/substrate proportion is bigger in this region. Born-Oppenheimer molecular dynamics was used to prove that the H4 and H5 hydrogen atoms from the imidazolium ring may interact with the oxygen atom from the epoxide and activate the C–O bond for the reaction to proceed.

A constante emissão de CO2 na atmosfera devido a fontes antropogênica despertou uma preocupação crescente em função da sua atuação no efeito estufa. Um número crescente de metodologias para redução da concentração deste gás na atmosfera vem sendo proposta e uma alternativa atrativa é a da inserção do CO2 em anéis epóxidos para formação de carbonatos cíclicos. Apesar de já existirem inúmeros trabalhos a respeito destas reações, o mecanismo pelo qual elas ocorrem não está completamente esclarecido. Neste trabalho é apresentado o estudo mecanístico da cicloadição de CO2 em diferentes epóxidos catalisada por líquidos iônicos haletos de alquil-imidazólios, CnMIm X (n = 1, 2, 3, 4 e X = Cl, Br, I), através da Teoria do Funcional da Densidade empregando-se o funcional !B97X-D e o conjunto de base 6-31G(d,p) e LanL2DZ (somente para o I). Propuseram-se duas rotas distintas para o mecanismo, uma composta por três etapas e outra composta por somente duas etapas. Ambas as rotas tiveram a primeira etapa como sendo a mais energética e correspondendo à abertura do anel epóxido e mostraram ser competitivas entre si energeticamente. Esta etapa mostrou depender de ambos cátion e ânion do catalisador para ocorrer, onde uma ligação de hidrogênio não clássica com o H2 do imidazólio aparece no estado de transição. Verificou-se que no geral a energia de ativação da reação diminui com o aumento da cadeia alquílica do cátion imidazólio assim como diminui com o aumento do caráter nucleofílico do haleto (Cl > Br > I). O substituinte do anel epóxido também exerce influência sobre a energia de ativação da reação, porém não há uma tendência bem definida. Constatou-se que o sítio mais favorável para ataque nucleofílico é o carbono não substituído do anel epóxido tanto pela diferença de energia quanto por análise de índices de reatividade de Fukui e de interações não covalentes. Uma análise de 14 funcionais da densidade e do método perturbativo de segunda ordem MP2 em comparação ao método composto G4MP2 revelaram a forte dependência das energias de ativação com o método empregado. Através de cálculos de dinâmica molecular clássica foi possível estudar dinamicamente o sistema brometo de 1-butil-3-metil imidazólio, o óxido de estireno e o CO2 e notou-se a formação de duas fases com a presença de uma interface. Adicionalmente, observou-se que a probabilidade da reação ocorrer no bulk do líquido iônico é maior, pois a proporção catalisador/substrato é maior nesta região. Por meio da dinâmica molecular de Born-Oppenheimer constatou-se que o anel epóxido também pode ser ativado através de interações com os hidrogênios H4 e H5 do anel imidazólio. / The constant emission of CO2 into the atmosphere due to anthropogenic sources has generated a growing concern regarding the greenhouse effect. Many methodologies to reduce the atmospheric CO2 concentration have been proposed and an alternative is the insertion of CO2 into epoxides to form cyclic carbonates. Although there are a lot of studies in this area, the reaction mechanism by which they occur is still unclear. In this work the cycloaddition mechanism of CO2 into different epoxides catalyzed by alkyl-imidazolium halide ionic liquids, CnMIm X (n = 1, 2, 3, 4 e X = Cl, Br, I), is presented. Density Functional Theory in conjunction with the functional !B97X-D and 6-31G(d,p) and LanL2DZ (for I atoms) basis sets were employed. Two distinct routes were proposed for the mechanism: one composed of three steps and another composed by only two steps. Both routes showed that the first step regarding the epoxide ring opening is the determined one and they are energetically competitive with each other. This step depends on both cation and anion from the catalyst to proceed through a non-classical hydrogen bond in the transition state. It was found that the activation energy decreases with the chain length of the alkyl group from the imidazolium ring as well as with the nucleophilic character of the halide (Cl > Br > I). The epoxide ring substituent also exerts influence on the activation energy of this reaction, but there is no well defined behaviour. The most favourable site for nucleophilic attack is the non-substituted epoxide ring carbon as was shown by the reaction energy difference and through reactive Fukui index and non-covalent interaction (NCI) analysis. 14 exchange-correlation density functionals were investigated and compared to the well established second order perturbation theory (MP2) method and G4MP2 composite method. One found out that the activation energies strongly depends on the chosen method. Through classical molecular dynamics it was possible to study the system 1-butyl-3-methyl-imidazolium bromide together with styrene oxide and CO2 e the formation of two phases with the presence of an interface was observed. Additionally, it was shown that the probability of the reaction to occur in the ionic liquid bulk is bigger because the catalyst/substrate proportion is bigger in this region. Born-Oppenheimer molecular dynamics was used to prove that the H4 and H5 hydrogen atoms from the imidazolium ring may interact with the oxygen atom from the epoxide and activate the C–O bond for the reaction to proceed.

A constante emissão de CO2 na atmosfera devido a fontes antropogênica despertou uma preocupação crescente em função da sua atuação no efeito estufa. Um número crescente de metodologias para redução da concentração deste gás na atmosfera vem sendo proposta e uma alternativa atrativa é a da inserção do CO2 em anéis epóxidos para formação de carbonatos cíclicos. Apesar de já existirem inúmeros trabalhos a respeito destas reações, o mecanismo pelo qual elas ocorrem não está completamente esclarecido. Neste trabalho é apresentado o estudo mecanístico da cicloadição de CO2 em diferentes epóxidos catalisada por líquidos iônicos haletos de alquil-imidazólios, CnMIm X (n = 1, 2, 3, 4 e X = Cl, Br, I), através da Teoria do Funcional da Densidade empregando-se o funcional !B97X-D e o conjunto de base 6-31G(d,p) e LanL2DZ (somente para o I). Propuseram-se duas rotas distintas para o mecanismo, uma composta por três etapas e outra composta por somente duas etapas. Ambas as rotas tiveram a primeira etapa como sendo a mais energética e correspondendo à abertura do anel epóxido e mostraram ser competitivas entre si energeticamente. Esta etapa mostrou depender de ambos cátion e ânion do catalisador para ocorrer, onde uma ligação de hidrogênio não clássica com o H2 do imidazólio aparece no estado de transição. Verificou-se que no geral a energia de ativação da reação diminui com o aumento da cadeia alquílica do cátion imidazólio assim como diminui com o aumento do caráter nucleofílico do haleto (Cl > Br > I). O substituinte do anel epóxido também exerce influência sobre a energia de ativação da reação, porém não há uma tendência bem definida. Constatou-se que o sítio mais favorável para ataque nucleofílico é o carbono não substituído do anel epóxido tanto pela diferença de energia quanto por análise de índices de reatividade de Fukui e de interações não covalentes. Uma análise de 14 funcionais da densidade e do método perturbativo de segunda ordem MP2 em comparação ao método composto G4MP2 revelaram a forte dependência das energias de ativação com o método empregado. Através de cálculos de dinâmica molecular clássica foi possível estudar dinamicamente o sistema brometo de 1-butil-3-metil imidazólio, o óxido de estireno e o CO2 e notou-se a formação de duas fases com a presença de uma interface. Adicionalmente, observou-se que a probabilidade da reação ocorrer no bulk do líquido iônico é maior, pois a proporção catalisador/substrato é maior nesta região. Por meio da dinâmica molecular de Born-Oppenheimer constatou-se que o anel epóxido também pode ser ativado através de interações com os hidrogênios H4 e H5 do anel imidazólio. / The constant emission of CO2 into the atmosphere due to anthropogenic sources has generated a growing concern regarding the greenhouse effect. Many methodologies to reduce the atmospheric CO2 concentration have been proposed and an alternative is the insertion of CO2 into epoxides to form cyclic carbonates. Although there are a lot of studies in this area, the reaction mechanism by which they occur is still unclear. In this work the cycloaddition mechanism of CO2 into different epoxides catalyzed by alkyl-imidazolium halide ionic liquids, CnMIm X (n = 1, 2, 3, 4 e X = Cl, Br, I), is presented. Density Functional Theory in conjunction with the functional !B97X-D and 6-31G(d,p) and LanL2DZ (for I atoms) basis sets were employed. Two distinct routes were proposed for the mechanism: one composed of three steps and another composed by only two steps. Both routes showed that the first step regarding the epoxide ring opening is the determined one and they are energetically competitive with each other. This step depends on both cation and anion from the catalyst to proceed through a non-classical hydrogen bond in the transition state. It was found that the activation energy decreases with the chain length of the alkyl group from the imidazolium ring as well as with the nucleophilic character of the halide (Cl > Br > I). The epoxide ring substituent also exerts influence on the activation energy of this reaction, but there is no well defined behaviour. The most favourable site for nucleophilic attack is the non-substituted epoxide ring carbon as was shown by the reaction energy difference and through reactive Fukui index and non-covalent interaction (NCI) analysis. 14 exchange-correlation density functionals were investigated and compared to the well established second order perturbation theory (MP2) method and G4MP2 composite method. One found out that the activation energies strongly depends on the chosen method. Through classical molecular dynamics it was possible to study the system 1-butyl-3-methyl-imidazolium bromide together with styrene oxide and CO2 e the formation of two phases with the presence of an interface was observed. Additionally, it was shown that the probability of the reaction to occur in the ionic liquid bulk is bigger because the catalyst/substrate proportion is bigger in this region. Born-Oppenheimer molecular dynamics was used to prove that the H4 and H5 hydrogen atoms from the imidazolium ring may interact with the oxygen atom from the epoxide and activate the C–O bond for the reaction to proceed.

The procedures and results of experimental and/or theoretical studies of four transient molecules, GeO, WO, BeH, and MgH are reported in the thesis. Two of them, GeO and WO, are diatomic molecules composed of relatively heavy atoms, and the other two are diatomic molecules with hydrogen as one of their component atoms. The GeO species was generated using a high temperature furnace. The rovibrational spectrum of five isotopomers were detected in emission using a Bruker IFS 120 HR Fourier transform spectrometer. Combined-isotopomer Dunham-type molecular constants have been derived for GeO using the DSParFit computer program. Analysis shows that the Born-Oppenheimer approximation is valid, as expected, for a molecule containing heavy atoms. The WO molecule was generated using a microwave discharge cell, and the spectra of electronic transitions of various systems were detected in emission using both the Bruker IFS 120 HR Fourier transform spectrometer at Waterloo and the McMath Pierce One-Meter Fourier transform spectrometer at the National Solar Observatory in Arizona. The ground electronic state has been confirmed to be X??Σ^- based on the analysis of seven 0-0 bands. BeH and MgH are typical molecules with hydrogen as one of their component atoms, and the effects of Born-Oppenheimer breakdown were expected. Both of these molecules have rotational perturbations in their excited electronic states. A 'new' method of data processing was used, i. e. , treating the electronic data as if they were from fluorescence series. Thus the harmful influence of the perturbed upper electronic states on the ground electronic state molecular constants is eliminated. By using the DSParFit computer program, accurate sets of combined-isotopomer Dunham-type molecular constants have been derived for the ground electronic states of the two molecules, and Born-Oppenheimer breakdown correction terms have been obtained.

Cette thèse est consacrée à l'étude des interactions rovibroniques au sein de complexes octaédriques pour lesquels l'approximation de Born-Oppenheimer n'est plus valide. Pour la première fois, un modèle rovibronique tensoriel effectif complet a été développé à partir des travaux portant sur les toupies sphériques dans un état électronique non dégénéré. Ce modèle inclut le cas de systèmes moléculaires possédant un nombre pair ou impair d'électrons et sa validité a pu être testée sur deux molécules, toutes deux octaédriques : V(CO)6 et ReF6. Pour ces deux systèmes, nous avons alors considéré quatre sous-niveaux vibroniques en interaction. Dans les deux cas, la comparaison entre les profils simulés et observés à basse résolution est satisfaisante. En parallèle, nous avons mis en place, par une approche de type algébrique, un modèle permettant le traitement d'un état électronique doublet, triplet ou quadruplet. L'effet Jahn-Teller a pu alors être rééxaminé au moyen de ce type d'approche.