No description available.

No description available.

No / Experimental observations of melt temperature profiles and melting performance of extruder screws are reported. A novel temperature sensor consisting of a grid of thermocouple junctions was used to take multiple temperature readings in real time across melt flow in a single screw extruder. Melt pressure in the die and power consumption were also monitored. Three extruder screws at a range of screw speeds were examined for a commercial grade of low density polyethylene. Results showed melt temperature fields at low throughputs to be relatively independent of screw geometry with a flat-shaped temperature profile dominated by conduction. At high throughputs, melting performance and measured temperature fields were highly dependent upon screw geometry. A barrier-flighted screw with Maddock mixer achieved significantly better melting than single flighted screws. Low temperature "shoulder" regions were observed in the temperature profiles of single-flighted screws at high throughput, due to late melting of the solid bed. Stability of the melt flow was also dependent upon screw geometry and the barrier-flighted screw achieving flow with lower variation in melt pressure and temperature. Dimensionless numbers were used to analyze the relative importance of conduction, convection, and viscous shear to the state of the melt at a range of extrusion conditions.

No / Ultrasonic technology provides a powerful and noninvasive method of in-process measurement during injection molding and extrusion. Changes in the velocity, attenuation and reflection coefficients of high frequency sound waves can be related to the state and conditions of the materials through which they propagate. The velocity of an ultrasonic wave changes with density and elastic moduli; this allows information on solidification and material properties to be collected during the molding cycle. The time of flight of the wave is a function of velocity and path length. This paper shows that it can be correlated with the residual wall thickness of polymer in the mold during gas assisted injection molding.

There is an increasing trend towards advancing the understanding and development of ethylene oligomerization catalysts, both in academia and industry. The metal of choice in this chemistry is invariably chromium, which has shown great versatility in selective trimerization/tetramerization, non-selective oligomerization and polymerization of ethylene. While much success has been achieved in ethylene trimerization, the same con not be said about tetramerization catalysis. Aminophosphine based ligands have demonstrated their ability towards selective 1-octene production, however, the popular PNP catalyst is able to achieve only 70% selectivity. In order to explore the possibility of developing and enhancing the selectivity of chromium based ethylene tetramerization catalyst, this thesis work was undertaken. The ligand systems we chose for our work were bidentate aminophosphine based (PN(CH2)nNP), which has yielded interesting selective oligomerization. Subtle modifications were found to result in drastic changes in selectivity, from tetramerization (PN(CH2)3NP) to trimerization (PN(CH2)2NP). We managed to successfully develop the first truly selective (over 90%) 1-octene catalyst with polymer-free behavior. Further modifications on the ligand framework, where one atom of Si was used to link the two NP units, resulted in non-selective oligomerization, in which case we determined that the oxidation-state of chromium is a key player. We explored other modifications on our selective ligands in which one of the arms on the bidentate ligand was replaced with a base-donor amine, phosphine or pyridine, and resulted in interesting selectivity changes. The final modification that we tested was a novel N(CH2)2P ligand and found it to be a highly active, non-selective oligomerization catalyst.

Ce projet de recherche consiste en l’étude de la réactivité et de la sélectivité de nouveaux catalyseurs de métathèse d’oléfines à base de ruthénium lors de réaction de fermeture de cycle par métathèse d’oléfines (RCM). L’emphase de cette étude repose sur l’évaluation de nouveaux catalyseurs possédant un ligand NHC (carbène N-hétérocyclique) C1-symétrique développés par le laboratoire Collins pour des réactions de désymétrisations asymétriques de méso-triènes par ARCM. Le projet a été séparé en deux sections distinctes. La première section concerne la formation d’oléfines trisubstituées par ARCM de méso-triènes. La seconde section consiste en la formation d’oléfines tétrasubstituées par le biais de la RCM de diènes et de la ARCM de méso-triènes. Il est à noter qu’il n’y a aucun précédent dans la littérature concernant la formation d’oléfines tétrasubstituées suite à une désymétrisation par ARCM. Lors de l’étude concernant la formation d’oléfines trisubstituées, une étude de cinétique a été entreprise dans le but de mieux comprendre la réactivité des différents catalyseurs. Il a été possible d’observer que le groupement N-alkyle a une grande influence sur la réactivité du catalyseur. Une étude de sélectivité a ensuite été entreprise pour déterminer si le groupement N-alkyle génère aussi un effet sur la sélectivité des catalyseurs. Cette étude a été effectuée par l’entremise de réactions de désymétrisation d’une variété de méso-triènes. En ce qui a trait à la formation d’oléfines tétrasubstituées, une étude de la réactivité des différents catalyseurs a été effectuée par l’intermédiaire de malonates de diéthyldiméthallyle. Il a encore une fois a été possible d’observer que le groupement N-alkyle possède un effet important sur la réactivité du catalyseur. Une étude de sélectivité a ensuite été entreprise pour déterminer si le groupement iv N-alkyle génère aussi un effet sur la sélectivité des catalyseurs. Cette étude a été effectuée par l’entremise de réactions de désymétrisation de différents mésotriènes. / This research consists in the study of the reactivity and selectivity of new chiral Ru-based olefin metathesis catalysts in ring-closing metathesis (RCM) reactions. The study focused on evaluating new catalysts possessing C1- symmetric NHC (N-heterocyclic carbene) ligands developed in our laboratories for asymmetric desymmetrization reactions of meso-trienes. The research was divided into two distinct sections, the first concerns the asymmetric ring closing metathesis (ARCM) processes that form trisubstituted olefins from meso-trienes. The second concerns the RCM and ARCM processes that form tetrasubstituted olefins from meso-trienes. It can be observed that there is no precedent in the literature concerning the formation of tetrasubstituted olefins via ARCM. During the investigation concerning the formation of trisubstituted olefins, a kinetic study was done to have better understanding of the catalyst selectivity. With this study in hand, it was possible to observe the effect induced by the N-alkyl group on the catalysts’ reactivity. A selectivity study was done to observe if the Nalkyl group could affects the catalysts’ selectivity. These investigations were done using a variety of meso-trienes in desymmetrization reactions to afford trisubstituted olefins. Concerning the formation of tetrasubstituted olefins, the catalysts’ reactivity was investigated in RCM processes involving diethyldimethallyl malonates. Once again, an effect induced by the N-alkyl group was observed concerning the reactivity of the catalysts. A selectivity study was performed. As for ARCM processes forming trisubstituted olefins, the N-alkyl group also had an impact on the selectivity of the catalysts. This investigation was done with ARCM desymmetrization of meso-trienes.

L’intérêt pour les hélicènes s’est accru au fur et à mesure que de nouvelles applications pour ce genre de molécules ont été découvertes. Par contre, la recherche dans ce domaine a été limitée par le petit nombre de voies de synthèse de ces molécules, la plupart nécessitant une étape de résolution ou de séparation des énantiomères par HPLC à la fin de la synthèse. Le présent projet de recherche propose d’utiliser la réaction de fermeture de cycle asymétrique par métathèse d’oléfines (asymmetric ring closing metathesis, ARCM) pour effectuer une synthèse d’hélicène à la fois catalytique et énantiosélective. La synthèse énantiosélective du [7]hélicène a été effectuée à l’aide d’une résolution cinétique du précurseur racémique. Au cours de cette synthèse, nous avons été en mesure de démontrer l’efficacité de différents catalyseurs de métathèse chiraux en plus de démontrer l’effet de l’ajout de simples oléfines comme additifs à la réaction. De plus, nous avons formulé une hypothèse expliquant cet effet à l’aide du mécanisme de la réaction. Finalement, nous avons aussi montré l’effet du changement de solvant sur la sélectivité de la réaction. Au cours de ces travaux, nous avons également développé une nouvelle méthode de synthèse de binaphtols à l’aide d’une réaction de couplage oxydatif impliquant un catalyseur de cuivre. À l’aide d’études de réactivité, nous avons été en mesure de démontrer que le métal portait deux ligands N-hétérocycliques (NHC). Nous avons aussi observé que le catalyseur favorisait la formation de binaphtol non symétrique avec un groupement naphtol avec une densité électronique élevée et un autre groupement naphtol avec une faible densité électronique. / The interest in helicenes has increased as new potential applications have been proposed for these twisted conjugated aromatics. However, further research is limited by the lack of methods for the enantioselective synthesis of helicenes. The current traditional syntheses often conclude with a resolution, most often via separation on a chiral stationary phase. This thesis describes the development of new catalytic method for the synthesis of helicenes using ring closing metathesis (RCM) employing highly reactive Ru-based catalysts or commercially available catalysts and microwave heating. Furthermore, an enantioselective variant of the asymmetric ring closing metathesis (ARCM) reactions was developed for the synthesis of enantioenriched [7]helicene via a kinetic resolution protocol. The development of the kinetic resolution involved the preparation and screening of a number of novel chiral Ru-based olefin metathesis catalysts. During these studies, the beneficial effect of simple olefins additives on the selectivity of the reaction was observed and a hypothesis to explain these effects has been proposed. In addition, intriguing solvent effects were also observed. Lastly, this thesis describes the investigation of a new method for the preparation of binaphthol via an oxidative coupling with a novel copper catalyst bearing two N-heterocyclic carbene (NHC) ligands. It was demonstrated that the cationic catalyst allowed for the formation of mixed oxidative couplings between electron rich and electron poor 2-naphthols to form C1-symmetric binaphthol derivatives.

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal.

In view of the importance of charge storage in polymer electrets for electromechanical transducer applications, the aim of this work is to contribute to the understanding of the charge-retention mechanisms. Furthermore, we will try to explain how the long-term storage of charge carriers in polymeric electrets works and to identify the probable trap sites. Charge trapping and de-trapping processes were investigated in order to obtain evidence of the trap sites in polymeric electrets. The charge de-trapping behavior of two particular polymer electrets was studied by means of thermal and optical techniques. In order to obtain evidence of trapping or de-trapping, charge and dipole profiles in the thickness direction were also monitored. <br><br> In this work, the study was performed on polyethylene terephthalate (PETP) and on cyclic-olefin copolymers (COCs). PETP is a photo-electret and contains a net dipole moment that is located in the carbonyl group (C = O). The electret behavior of PETP arises from both the dipole orientation and the charge storage. In contrast to PETP, COCs are not photo-electrets and do not exhibit a net dipole moment. The electret behavior of COCs arises from the storage of charges only. <br><br> COC samples were doped with dyes in order to probe their internal electric field. COCs show shallow charge traps at 0.6 and 0.11 eV, characteristic for thermally activated processes. In addition, deep charge traps are present at 4 eV, characteristic for optically stimulated processes. <br><br> PETP films exhibit a photo-current transient with a maximum that depends on the temperature with an activation energy of 0.106 eV. The pair thermalization length (rc) calculated from this activation energy for the photo-carrier generation in PETP was estimated to be approx. 4.5 nm. The generated photo-charge carriers can recombine, interact with the trapped charge, escape through the electrodes or occupy an empty trap. <br><br> PETP possesses a small quasi-static pyroelectric coefficient (QPC): ~0.6 nC/(m²K) for unpoled samples, ~60 nC/(m²K) for poled samples and ~60 nC/(m²K) for unpoled samples under an electric bias (E ~10 V/µm). When stored charges generate an internal electric field of approx. 10 V/µm, they are able to induce a QPC comparable to that of the oriented dipoles. Moreover, we observe charge-dipole interaction. Since the raw data of the QPC-experiments on PETP samples is noisy, a numerical Fourier-filtering procedure was applied. Simulations show that the data analysis is reliable when the noise level is up to 3 times larger than the calculated pyroelectric current for the QPC. <br><br> PETP films revealed shallow traps at approx. 0.36 eV during thermally-stimulated current measurements. These energy traps are associated with molecular dipole relaxations (C = O). On the other hand, photo-activated measurements yield deep charge traps at 4.1 and 5.2 eV. The observed wavelengths belong to the transitions in PETP that are analogous to the π - π* benzene transitions. The observed charge de-trapping selectivity in the photocharge decay indicates that the charge detrapping is from a direct photon-charge interaction. Additionally, the charge de-trapping can be facilitated by photo-exciton generation and the interaction of the photo-excitons with trapped charge carriers. These results indicate that the benzene rings (C6H4) and the dipolar groups (C = O) can stabilize and share an extra charge carrier in a chemical resonance. In this way, this charge could be de-trapped in connection with the photo-transitions of the benzene ring and with the dipole relaxations. <br><br> The thermally-activated charge release shows a difference in the trap depth to its optical counterpart. This difference indicates that the trap levels depend on the de-trapping process and on the chemical nature of the trap site. That is, the processes of charge detrapping from shallow traps are related to secondary forces. The processes of charge de-trapping from deep traps are related to primary forces. Furthermore, the presence of deep trap levels causes the stability of the charge for long periods of time. / Angesichts der Bedeutung der Ladungsspeicherung in Polymerelektreten für viele Anwendungen, wie z.B. in elektromechanischen Wandler, ist es das Ziel dieser Arbeit, zum Verständnis der zugrundeliegenden Mechanismen der kurz- und langfristigen Ladungsstabilisierung beizutragen sowie mögliche Haftstellen zu identifizieren. Ladungs- und Entladungsprozesse in Elektreten geben Hinweise auf Ladungshaftstellen. Diese Prozesse wurden mit thermischen und optischen Methoden bei gleichzeitiger Messung von Ladungs- und Polarisationprofilen untersucht. Die experimentellen Untersuchungen der vorliegenden Arbeit wurden an Polyethylenterephthalat (PETP) und an Cyclischen-Olefin Copolymeren (COC) durchgeführt. <br><br> PETP ist ein Photoelektret und weist in der Carbonylgruppe (C = O) ein Dipolmoment auf. Die Elektreteigenschaften ergeben sich sowohl aus der Orientierungspolarisation als auch aus der Ladungsspeicherung. Im Gegensatz zu PETP ist COC kein Photoelektret und zeigt auch keine Orientierungspolarisation. Deshalb folgen die Elektreteigenschaften des COC ausschließlich aus der Ladungsspeicherung. Die COC-Proben wurden mit Farbstoffen dotiert, um das innere elektrische Feld zu untersuchen. Diese Systeme zeigen flache Ladungshaftstellen bei 0,6 und 0,11 eV, die durch thermisch stimulierte Prozesse entladen werden sowie tiefe Haftstellen bei 4 eV, die optisch stimuliert werden können. <br><br> PETP-Filme zeigen einen transienten Photostrom mit einem Maximalwert ( jp), der von der Temperatur mit einer Aktivierungsenergie von 0,106 eV abhängt. Der thermische Paarabstand (rc) kann für die Photoladungsgeneration in PETP auf ca. 4,5 nm abgeschätzt werden. Die Photoladungsträger können rekombinieren, mit den gespeicherten Ladungen interagieren, über die Elektroden entkommen oder eine leere Haftstelle einnehmen. <br><br> PETP zeigt einen kleinen quasi-statischen pyroelektrischen Koeffizienten (QPC) von ca. 0,6 nC/(m²K) für nicht polarisierte Proben, ca. 60 nC/(m²K) für polarisierte Proben und ca. 60 nC/(m²K) für nicht polarisierte Proben mit Vorspannung (E ~10 V/µm). Wenn die gespeicherten Ladungen ein internes elektrisches Feld von ca. 10 V/µm generieren können, sind sie in der Lage, einen QPC herbeizuführen, der vergleichbar mit dem von orientierten Dipolen ist. Es ist außerdem möglich, eine Ladungs-Dipol-Wechselwirkung zu beobachten. Da die QPM-Daten von PETP auf Grund des geringen Signals verrauscht sind, wurde ein numerisches Fourier-Filterverfahren angewandt. Simulationen zeigen, dass eine zuverlässige Datenanalyse noch bei einem Signal möglich ist, dessen Rauschen bis zu 3-mal größer ist als der berechnete pyroelektrische Strom. <br><br> Messungen der thermisch stimulierten Entladung von PETP-Filmen ergaben flache Haftstellen bei ca. 0,36 eV, welche mit der Dipolrelaxation der Carbonylgruppe (C = O) assoziiert sind. Messungen der photostimulierten Entladung ergaben tiefe Haftstellen bei 4,1 und 5,2 eV. Die beobachteten Wellenlängen entsprechen Übergängen in PETP analog den π - π* Übergängen in Benzol. Die beobachtete Selektivität bei der photostimulierten Entladung lässt auf eine direkte Wechselwirkung von Photonen und Ladungen schließen. Einen zusätzlichen Einfluß auf die Entladung hat die Erzeugung von Photo-Exzitonen und deren Wechselwirkung mit den gespeicherten Ladungsträgern. Diese Ergebnisse deuten darauf hin, dass die Phenylringe (C6H4) und die Dipolgruppen (C = O) eine zusätzliche Ladung in einer chemischen Resonanz stabilisieren und miteinander teilen können. Daher kann die gebundene Ladung auch durch einen Photoübergang im Benzolring oder durch eine Dipolrelaxation freigesetzt werden. <br><br> Die mittels thermisch stimulierter Entladung bestimmte Tiefe der Haftstellen unterscheidet sich deutlich von den mittels photostimulierter Entladung gemessenen Werten. Flachere Haftstellen werden bei der thermisch stimulierten Entladung gefunden und können sekundären Kräften zugeordnet werden. Die tieferen Haftstellen sind chemischer Natur und können primären Kräften zugeordnet werden. Letztere sind für die Langzeitstabilität der Ladung in Polymerelektreten verantwortlich.

There is an increasing trend towards advancing the understanding and development of ethylene oligomerization catalysts, both in academia and industry. The metal of choice in this chemistry is invariably chromium, which has shown great versatility in selective trimerization/tetramerization, non-selective oligomerization and polymerization of ethylene. While much success has been achieved in ethylene trimerization, the same con not be said about tetramerization catalysis. Aminophosphine based ligands have demonstrated their ability towards selective 1-octene production, however, the popular PNP catalyst is able to achieve only 70% selectivity. In order to explore the possibility of developing and enhancing the selectivity of chromium based ethylene tetramerization catalyst, this thesis work was undertaken. The ligand systems we chose for our work were bidentate aminophosphine based (PN(CH2)nNP), which has yielded interesting selective oligomerization. Subtle modifications were found to result in drastic changes in selectivity, from tetramerization (PN(CH2)3NP) to trimerization (PN(CH2)2NP). We managed to successfully develop the first truly selective (over 90%) 1-octene catalyst with polymer-free behavior. Further modifications on the ligand framework, where one atom of Si was used to link the two NP units, resulted in non-selective oligomerization, in which case we determined that the oxidation-state of chromium is a key player. We explored other modifications on our selective ligands in which one of the arms on the bidentate ligand was replaced with a base-donor amine, phosphine or pyridine, and resulted in interesting selectivity changes. The final modification that we tested was a novel N(CH2)2P ligand and found it to be a highly active, non-selective oligomerization catalyst.