The research goal of this work was dedicated to improvement of the properties and enhancement of the application potential of commodity polymer based on polyolefins by choosing different synthesis routes to create new structures and materials. More precisely, the presented study explores different aspects of metallocene and post-metallocene catalyzed olefin polymerization leading to synthesis of novel copolymers and nanocomposites. The first part of this thesis deals with controlled polymerization of α-olefins catalyzed by post-metallocenes. Bis(phenoxyamine) zirconium complexes with [ONNO]-type ligands bearing cumyl (bPA-c) and 1-adamantyl (bPA-a) ortho-substituents were applied. For the polymerization catalyzed by bPA catalyst quasi-living kinetic character is proposed. The bPA catalyst was applied for synthesis of block copolymers by employing the strategy of sequential monomer addition. The blocky structure of the copolymer was successfully achieved and confirmed by NMR techniques. Moreover, the monomodal distribution of molar mass in SEC chromatogram confirmed the absence of homopolymers. In the second part of the work new defined comb-like copolymers (CLC) having a poly(10-undecene-1-ol) (PUol) backbone and densely grafted poly(ε-caprolactone) (PCL) side chains are presented. These copolymers were synthesized in two steps by means of metallocene polymerization followed by ring opening polymerization. Copolymers with varied and adjustable graft length (PCL segments) were synthesized. It was proved that the melting and crystallization temperatures of the CLC correlate with the PCL side chain length, i.e. longer chains result in higher Tm and Tc,o values. The melting enthalpy was found to be asymptotically dependent on the length of PCL side chains. The bulk morphology of the comb-like copolymers is proposed to be lamellar as judged from the TEM micrographs. The third part of the thesis is focused on the synthesis of polypropylene nanocomposites via in situ polymerization. Thereby, organomodified aluminumphosphate with kanemite-type layered structure (AlPO-kan) has been used as novel filler. Melt compounding composites were prepared for comparison purposes to evaluate the influence of in situ synthesis on the dispersion quality of the filler in polymer matrix. Melt compounding of neat AlPO-kan with PP did not lead to formation of nanocomposites. TEM images show macro-composites with the lamellar solid remaining agglomerated. On the contrary, in situ polymerization of propene yielded materials with exfoliated nanocomposite morphology. In XRD, diffractions of the AlPO-kan pilling of layers are not detectable. It can be concluded that the primary existing layers are delaminated. Very fine distribution of the filler in the polypropylene matrix has been impressively demonstrated by TEM.

No description available.

<p>      </p> <p>Full exploitation of shale resources requires new catalytic techniques to efficiently convert the methane, ethane, and propane found in shale gas to value-added fuels and chemicals. A promising process of converting ethane and propane involves catalytic light alkane dehydrogenation and the subsequent oligomerization of light alkenes. The first part of this work focuses on the examination of the mechanistic details of propane dehydrogenation on Pt-based alloy catalysts, where first principles-based free energy, microkinetic, and degrees of rate control analyses are performed to understand and rationalize the selective propane dehydrogenation using a Pt3Mn alloy. We show that only the under-coordinated, Mn-decorated Pt sites, represented by a Pt3Mn(211) surface, are selective to propylene formation, which can be attributed to several key mechanistic details: (1) facile propylene desorption and (2) hindered pathways that are inherently non-selective to propylene and lead to the formation of isomers. These kinetic details can, in turn, be interpreted using the free energy landscapes of propane dehydrogenation on the Pt3Mn(211) surface, which features a reasonably stronger binding of propylene than those of its isomers. From this study, we extract two selectivity descriptors for propane dehydrogenation: The energetics of propylene desorption versus deep-dehydrogenation, as well as the energetics of the formation of propylene versus its isomers. The properties can be used for designing further improved light alkane dehydrogenation catalysts.</p>

No / Advances in micromoulding technology are now allowing mass production of complex, three-dimensional functional products having sub-milligram masses and carefully tailored surface finishes. In order to create a viable manufacturing process for these components, accurate process monitoring and product evaluation are essential in order to highlight process problems and production of substandard parts. The present study describes work implementing a suite of sensors on a commercial micromoulding machine for detailed process interrogation. Evaluation of demoulded products is performed with a single camera based system combined with custom software to allow for three-dimensional characterisation of products during the process.

A spin-cast silicone membrane has been successfully bonded between two injection-molded microstructured plastic discs. This sandwich structure creates a useful platform for mass production of microfluidic systems, provided that the bonds are leakproof. The bonds were achieved by a silicon dioxide coating deposited on the plastic discs by evaporation. This investigation is concerned with the process and the result only, no theory is discussed.

Chemical modification of proteins is critical for many areas of biochemistry and medicine. Several methods for site-selective protein modification are reported in this Thesis that are useful in accessing both natural and artificial protein architectures. Multiple, complementary methods for the conversion of cysteine to dehydroalanine are described. Dehydroalanine is used as a general precursor to several post-translational modifications and glycosylation, polyprenylation, phosphorylation, and lysine methylation and acetylation are all accessible. These modifications and their mimics were explored on multiple proteins, including histone proteins. Unnatural modifications were also explored. The first examples of olefin metathesis and Suzuki-Miyaura cross-coupling on protein substrates are reported. Allyl sulfides were discovered to be remarkably reactive substrates in olefin metathesis, allowing use of this reaction in water and on proteins. For Suzuki-Miyaura cross-coupling, a new catalyst is described that is fully compatible with proteins. Both olefin metathesis and cross-coupling allow the formation of carbon-carbon bonds on proteins. The prospects of these transformations in chemical biology are discussed. Finally, a novel strategy is reported for the installation of natural, unnatural, and post-translationally modified amino acid residues on proteins. This technology relies on addition of carbon radicals to dehydroalanine. This method of "chemical mutagenesis" is anticipated to complement standard genetic manipulation of protein structure.

Cette thèse décrit la synthèse, la caractérisation, les réactivités, et les propriétés physiques de complexes divalents et trivalents de Ni formés à partir de nouveaux ligands «pincer» de type POCN. Les ligands POCN de type amine sont préparés d’une façon simple et efficace via l’amination réductrice de 3-hydroxybenzaldéhyde avec NaBH4 et plusieurs amines, suivie par la phosphination de l’amino alcool résultant pour installer la fonction phosphinite (OPR2); le ligand POCN de type imine 1,3-(i-Pr)2PC6H4C(H)=N(CH2Ph) est préparé de façon similaire en faisant usage de PhCH2NH2 en l’absence de NaBH4. La réaction de ces ligands «pincer» de type POCN avec NiBr2(CH3CN)x en présence d’une base résulte en un bon rendement de la cyclométalation du lien C-H situé en ortho aux fonctions amine et phosphinite. Il fut découvert que la base est essentielle pour la propreté et le haut rendement de la formation des complexes «pincer» désirés. Nous avons préparé des complexes «pincer» plan- carrés de type POCN, (POCNRR΄)NiBr, possédant des fonctions amines secondaires et tertiaires qui démontrent des réactivités différentes selon les substituants R et R΄. Par exemple, les complexes possédant des fonctions amines tertiaires ArCH2NR2 (NR2= NMe2, NEt2, and morpholinyl) démontrent des propriétés rédox intéressantes et pourraient être convertis en leurs analogues trivalents (POCNR2)NiBr2 lorsque réagis avec Br2 ou N-bromosuccinimide (NBS). Les complexes trivalents paramagnétiques à 17 électrons adoptent une géométrie de type plan-carré déformée, les atomes de Br occupant les positions axiale et équatoriale. Les analyses «DSC» et «TGA» des ces composés ont démontré qu’ils sont thermiquement stables jusqu’à ~170 °C; tandis que la spectroscopie d’absorption en solution a démontré qu’ils se décomposent thermiquement à beaucoup plus basse température pour regénérer les complexes divalents ne possédant qu’un seul Br; l’encombrement stérique des substitutants amines accélère cette route de décomposition de façon significative. Les analogues NMe2 et N(morpholinyl) de ces espèces de NiIII sont actifs pour catalyser la réaction d’addition de Kharasch, de CX4 à des oléfines telles que le styrène, tandis qu’il fut découvert que l’analogue le moins thermiquement stable (POCNEt2)Ni est complètement inerte pour catalyser cette réaction. Les complexes (POCNRH)NiBr possédant des fonctions amines secondaires permettent l’accès à des fonctions amines substituées de façon non symétrique via leur réaction avec des halogénures d’alkyle. Un autre avantage important de ces complexes réside dans la possibilité de déprotonation pour préparer des complexes POCN de type amide. De telles tentatives pour déprotoner les fonctions NRH nous ont permis de préparer des espèces dimériques possédant des ligands amides pontants. La nature dimérique des ces complexes [P,C,N,N-(2,6-(i-Pr)2PC6H3CH2NR)Ni]2 (R= PhCH2 et Ph) fut établie par des études de diffraction des rayons-X qui ont démontré différentes géométries pour les cœurs Ni2N2 selon le substituant N : l’analogue (PhCH2)N possède une orientation syn des substitutants benzyles et un arrangement ressemblant à celui du cyclobutane du Ni et des atomes d’azote, tandis que l’analogue PhN adopte un arrangement de type diamant quasi-planaire des atomes du Ni et des atomes d’azote et une orientation anti des substituants phényles. Les espèces dimériques ne se dissocient pas en présence d’alcools, mais elles promouvoient l’alcoolyse catalytique de l’acrylonitrile. De façon intéressante, les rendements de ces réactions sont plus élevés avec les alcools possédant des fonctions O-H plus acides, avec un nombre de «turnover» catalytique pouvant atteindre 2000 dans le cas de m-cresol. Nous croyons que ces réactions d’alcoolyse procèdent par activation hétérolytique de l’alcool par l’espèce dimérique via des liaisons hydrogènes avec une ou deux des fonctions amides du dimère. Les espèces dimériques de Ni (II) s’oxydent facilement électrochimiquement et par reaction avec NBS ou Br2. De façon surprenante, l’oxydation chimique mène à l’isolation de nouveaux produits monomériques dans lesquels le centre métallique et le ligand sont oxydés. Le mécanisme d’oxydation fut aussi investigué par RMN, «UV-vis-NIR», «DFT» et spectroélectrochimie. / This thesis describes the synthesis, characterization, reactivities, and physical properties of divalent and trivalent complexes of Nickel based on new POCN-type pincer ligands. The amino-type POCN ligands were prepared in a simple and efficient manner via reductive amination of 3-hydroxybenzaldehyde with NaBH4 and various amines, followed by phosphination of the resulting amino alcohol to install the phosphinite (OPR2) functionality. The imino-type POCN ligand 1,3-(i-Pr)2PC6H4C(H)=N(CH2Ph) was prepared similarly using PhCH2NH2 in the absence of NaBH4. Reaction of these POCN-type pincer ligands with NiBr2(CH3CN)x in the presence of a base results in the high yield cyclometalation of the C-H bond which is ortho to the amine and phosphinite functionalities. The base was found to be essential for a clean and high yield formation of the desired pincer complexes. We have thus prepared square planar POCN-type pincer complexes (POCNRR΄)NiBr featuring tertiary or secondary amine moieties that exhibit different reactivities as a function of amine substituents R and R΄. For instance, complexes bearing the tertiary amine moieties ArCH2NR2 (NR2= NMe2, NEt2, and morpholinyl) displayed interesting redox properties and could be converted into their trivalent analogues (POCNR2)NiBr2 when reacted with Br2 or N-bromosuccinimide (NBS). These 17-electron, paramagnetic trivalent complexes adopt a distorted square pyramidal geometry with Br atoms at axial and equatorial positions. DSC and TGA analyses of these compounds revealed them to be thermally stable up to ~170 °C; whereas absorption spectroscopy in solution showed that they undergo thermal decomposition at much lower temperatures to regenerate the monobromo divalent complexes; increased steric bulk of the amine substituents accelerate this decomposition pathway significantly. The NMe2 and N(morpholinyl) analogues of these NiIII species are active catalysts for the Kharasch addition of CX4 to olefins such as styrene, whereas the least thermally stable analogue (POCNEt2)Ni was found to be completely inert for this reaction. The complexes (POCNRH)NiBr featuring secondary amine moieties allow access to unsymmetrically substituted amine moieties via reaction with alkyl halides. Another important advantage of these complexes lies in the possibility of deprotonation to prepare amide-type POCN complexes. Such attempts at deprotonating the NRH moieties have allowed us to prepare dimeric species featuring bridging amido ligands. The dimeric nature of these complexes [P,C,N,N-(2,6-(i-Pr)2PC6H3CH2NR)Ni]2 (R= PhCH2 and Ph) was established through X-ray diffraction studies that showed different geometries for the Ni2N2 cores as a function of N-substituent: the (PhCH2)N analogue featured a syn orientation of the benzyl substituents and a cyclobutane-like arrangement of Ni and of the nitrogen atoms, whereas the PhN analogue adopted a nearly planar diamond-like arrangement of the Ni and of the nitrogen atoms and an anti orientation of the phenyl substituents. These dimeric species do not dissociate in the presence of alcohols, but they promote the catalytic alcoholysis of acrylonitrile. Interestingly, yields of these reactions are higher with alcohols possessing more acidic O-H moieties, with a catalytic turnover number reaching up to 2000 in the case of m-cresol. These alcoholysis reactions are believed to proceed through heterolytic activation of the alcohol by dimeric species via hydrogen bonding with one or two amido moieties in the dimer. The dimeric Ni (II) species were found to undergo facile oxidation both electrochemically and in reaction with NBS or Br2. Surprisingly, chemical oxidation led to isolation of new monomeric products in which both the metallic center and the ligand were oxidized. giving a trivalent species featuring an imine-type POCN ligand. Oxidation mechanism was investigated in detail by NMR, UV-vis-NIR, DFT and spectroelectrochemistry.

La caractérisation juste et reproductible en isotopie et en concentration des radioéléments est l’une des thématiques essentielles des laboratoires d’analyse dans le domaine du nucléaire. Afin de minimiser les temps de manipulation en boite à gants des personnels et la production de déchets radioactifs liés à l’analyse de combustibles nucléaires, il est nécessaire de proposer des solutions efficaces et innovantes. Depuis quelques années, la miniaturisation des systèmes séparatifs constitue l’un des axes de développement majeurs de la chimie analytique et ces microsystèmes constituent certainement une des solutions pour répondre aux exigences de l’analyse nucléaire. Ce travail a pour objectif la conception d’une plateforme analytique miniaturisée et à usage unique, dédiée a la séparation des lanthanides, issus des combustibles usés, en amont de leur analyse par spectrométrie de masse. Destiné à remplacer une étape de séparation chromatographique au centre d’un processus analytique de trois étapes, le nouveau protocole basé sur l’isotachophorèse (ITP) doit satisfaire un cahier des charges précis. Les propriétés de complexation des lanthanides ont d’abord été exploitées afin d’obtenir avec un agent chélatant unique et rigoureusement sélectionné, l’acide 2-hydroxy-2-methylbutyrique (HMBA), la sélectivité intra période nécessaire à leur séparation complète par ITP. Basées sur des modèles théoriques existants, des études complémentaires, notamment des paramètres influençant la résolution, ont permis l’amélioration des performances globales du système ainsi que son dimensionnement. Pour réduire drastiquement le volume de déchets liquides secondaires (solutions de rinçage) et la manipulation de matériaux et de matériels radioactifs, le protocole a été implanté sur un microsystème polymérique jetable en COC, spécialement développé pour cette application. Ce microsystème a ensuite été couplé à un spectromètre de masse a multi collection et source à plasma à couplage inductif pour mesurer les rapports isotopiques / The accurate and reproducible characterization of radioactive solutions in isotope composition and concentration is an essential topic for analytical laboratories in the nuclear field. In order to reduce manipulation time in glove box and production of contaminated wastes, it is necessary to propose innovative and efficient solutions for these analyses. Since few years, microchips are a major field of development in analytical chemistry and those devices could provide a solution which fits the needs of nuclear industry. The aim of this work is to design a disposable analytical micro-device devoted to lanthanide separation from spent nuclear fuel before their analysis in mass spectrometry. Designed to be used in place of a separation process by liquid chromatography which is involved in a three step protocol, the new protocol based on isotachophoresis (ITP) keeps compatible with the other two steps. The complete separation of lanthanides by ITP was obtained by the use of only one chelating compound rigorously selected: the 2-hydroxy 2-methyl butyric acid (HMBA). The main parameters involved in solute resolution were defined from the theoretical models of ITP and experimental studies of the influence of these parameters allowed to optimize the geometry of the system and to improve its performances. To suppress cleaning of the system and, consequently, to strongly reduce both liquid waste volume and handling radioactive material, the ITP protocol was transferred in a polymeric (COC) disposable microchip especially developed for this purpose

The work described in this thesis focuses on the effects that adsorption processes on catalytic surfaces pose in controlling key steps that can affect and control reaction pathways. To that, the development of Nuclear Magnetic Resonance (NMR) relaxometry methods and the comparison with traditional catalytic was performed with a series of C5 and C6 unsaturated hydrocarbons on two different alumina supports, γ- and θ-Al2O3. The developed techniques were applied in the study of liquid phase selective hydrogenation of citral on 5% Pt/SiO2. Infrared (IR) spectroscopy, volumetric adsorption isotherms, dynamic isotherms via a Tapered Element Oscillating Microbalance (TEOM), temperature programmed desorption (TPD) as well as 13C T1 NMR and 1H 2D T1-T2 relaxometry methods were employed. Energies of adsorption as a function of coverage were obtained via adsorption isotherms and the particular surface adsorbate interactions were described with IR spectroscopy. For example, 1-pentyne showed the strongest interaction with the alumina (94 kJ mol-1) while 1-pentene presented a weaker interaction (46 kJ mol-1) on θ-Al2O3. Desorption energies obtained from TPD ranged 85 – 130 kJ mol-1, irrespective of the adsorbate. Reactivity of the aluminas was captured with TPD, TEOM and NMR relaxometry. Interaction of adsorbates with hydrocarbon occurred predominantly on weak adsorption sites. 13C NMR T1 relaxometry provided in addition atom-specific adsorbate-adsorbent interaction strengths, showing the molecular geometry of adsorption, and applied in co adsorption measurements. The selective hydrogenation of citral as a model α,β-unsaturated aldehyde and the effect of different solvents on the activity and product distribution was studied at 298 and 373 K. A series of polar protic, polar aprotic and non polar solvents was investigated. Results showed higher initial reaction rates in non polar solvents but higher selectivities towards desired products on polar protic solvents. Solvent used also affected by product formation. The strong variations in reaction rates and selectivities reported were related with adsorbate catalyst interactions, as well as solvent reactant interactions. For example, adsorption isotherms showed that ethanol notably reduced the adsorption capacity of citral as compared with hexane, related with the rate differences observed. ATR-IR measurements indicated solvent citral interactions were solely present in polar protic solvents in line with higher yields of geraniol and nerol. Finally, 13C T1 NMR and 1H 2D T1-T2 correlation experiments determined that the geometry of adsorption of citral, influenced by solvent, affected product selectivity, and that product adsorption affected selectivity and deactivation.

No description available.