Combined thermodynamic/kinetic events amount to a kinetically controlled Dynamic Combinatorial Resolution (DCR) process, where the lability of themolecules/aggregates are used to generate dynamics, and the species experiencing the lowest activation energy is selected via kinetic process. Bothinter- and intramolecular processes can be performed using this concept,resulting in complete resolution and associated amplification of the selected species. When intermolecular processes are resolved using this method, an additional advantage is that only a catalytic amount of selector is required tocontrol the system.In this thesis, the Henry and Strecker reactions were developed as efficient C–C bond-forming routes to single and multi-level dynamic covalent systems.These methods efficiently provided a vast variety of substrates from smallnumbers of starting compounds. These dynamic systems, generated underthermodynamic control at mild conditions, were coupled in one-pot processes with kinetically controlled lipase-mediated transacylation. The enzym emediated resolution of the dynamic nitroaldol system led to enantiomericallypure β-nitroacetates in high yield. Furthermore, combination of multi-leveldynamic Strecker systems and lipase-mediated acylation resulted in theresolution of specific α-aminonitriles from the pool.In addition, the asymmetric synthesis of discrete β-nitroalkanol derivatives wassimply achieved, resulting in high yields and high enantiomeric purities through the direct one-pot procedure. Moreover, racemase type activity oflipase enzyme through N-substituted α-aminonitrile structure has been discovered. By use of control experiments together with molecular modeling,the mechanism of the racemization process has been established. Asymmetric synthesis of N-methyl α-aminonitriles was also performed through the dualfunction of lipase, resulting in high yield and good enantio selectivity. / <p>QC 20100818</p>

The first part of the work describes a procedure of oligonucleotide purification using a reversed-phase cartridge. The developed method employs a very efficient yet mild oligonucleotide detritylation on the cartridge support allowing fast purification of oligonucleotides regardless of their 5´-modification. Thiol- and amino-modified oligonuc-leotides were detritylated and purified with the same high efficiency as non-modified oligonucleotides. The method enables fast, parallel and automated purification of many oligonucleotide probes that was not possible before. In combination with the method of removal of tritylated failure fragments oligonucleotides were produced with purity superior to that of oligonucleotides purified using RP HPLC. In the second part of the present study a method of solid-phase RNA synthesis using 2´-tert-butyldithiomethyl (2´-O-DTM) is discussed. The stability of the DTM group during oligonucleotide assembly and deprotection in ammonia, together with its ability for rapid deprotection under mild conditions, allowed the synthesis of RNA with the quality similar to that of synthetic DNA oligonucleotides. The advantage of the 2´-O-DTM group is that it is completely orthogonal to all protecting groups used for the traditional solid-phase DNA synthesis. Therefore, the synthesis can be performed using a standard DNA synthesis procedure – no changes are needed for the product assembly. RNA oligonucleotides synthesized with retained 5´-terminal trityl group can be subjected to a cartridge-based purification using the procedure described in the first part of the study. The phosphoramidite synthesis was optimized for a large scale preparation and gives versatility for introduction of other alkyldithiomethyl groups according to the preference to their certain properties. The third part of the thesis describes the synthesis of a dithiomethyl linker and its utility for reversible conjugation of oligonucleotides. A dithiomethyl group, cleavable under mild conditions, was introduced onto 3´-OH of tritylated nucleosides via 3´-O-methylthiomethyl derivatives. The influence of different alkyl substituents on the disulfide bond stability was investigated, and stable analogues were employed in oligosyntheses. Two applications were developed using the present linker: 1) purification of oligonucleotides linked to the solid support; and 2) cartridge-based purification of tritylated oligonucleotides having an additional hydrophobic group on their 3´- terminus.

This thesis concerns the study of reaction mechanisms by means of kinetic isotope effects (KIEs). Studies of the nucleophilic bimolecular substitution (SN2) reaction had the dual purpose of improving our fundamental understanding of molecular reactivity and assessing the ability of kinetic isotope effects to serve as mechanistic tools. The transition state of the SN2 reaction between a cyanide ion and ethyl chloride in tetrahydrofuran was found to be reactant like and only slightly tighter than has been found previously for the same reaction in dimethyl sulphoxide. One conclusion was that the transition-state structure in this reaction was predicted fairly well by the theoretical calculations, even without solvent modelling. The SN2 reactions between cyanide ions and para-substituted benzyl chlorides were found to have reactant-like transition states, of which the Cα-Cl bond was most influenced by the para-substitution. Theoretical calculations indicated that the chlorine KIEs could be used as probes of the substituent effect on the Cα-Cl bond if bond fission was not too advanced in the transition state. Furthermore, the nucleophile carbon 11C/14C KIEs were determined for the reactions between cyanide ions and various ethyl substrates in dimethyl sulphoxide. Precision conductometry was employed to estimate the aggregation status of tetrabutylammonium cyanide in tetrahydrofuran and in dimethyl sulphoxide, which is of interest as tetrabutylammonium cyanide is frequently used as the nucleophilic reagent in mechanistic investigations and synthetic reactions. The tendency for ion-pair formation was found to be very slight, significant, and very strong in dimethyl sulphoxide, water, and tetrahydrofuran, respectively. The nitrogen kinetic isotope effect on monoamine oxidase B catalysed deamination of benzylamine was determined in an attempt to obtain conclusive evidence regarding the mechanism of the oxidation. Monoamine oxidase is an important drug target in connection with the treatment of, for example, depression and Parkinson’s disease, and knowledge on how the enzyme effects catalysis would facilitate the design of highly selective and efficient inhibitors.

This thesis describes different aspects of protein interactions. Initially the function of peptides and their conjugates with small molecule inhibitors on the surface of Human Carbonic Anhydrase isoenzyme II (HCAII) is evaluated. The affinities for HCAII of the flexible, synthetic helix-loop-helix motif conjugated with a series of spacered inhibitors were measured by fluorescence spectroscopy and found in the best cases to be in the low nM range. Dissociation constants show considerable dependence on linker length and vary from 3000 nM for the shortest spacer to 40 nM for the longest with a minimum of 5 nM for a spacer with an intermediate length. A rationale for binding differences based on cooperativity is presented and supported by affinities as determined by fluorescence spectroscopy. Heteronuclear Single Quantum Correlation Nuclear Magnetic Resonance (HSQC) spectroscopic experiments with 15N-labeled HCAII were used for the determination of the site of interaction. The influence of peptide charge and hydrophobicity was evaluated by surface plasmon resonance experiments. Hydrophobic sidechain branching and, more pronounced, peptide charge was demonstrated to modulate peptide – HCAII binding interactions in a cooperative manner, with affinities spanning almost two orders of magnitude. Detailed synthesis of small molecule inhibitors in a general lead discovery library as well as a targeted library for inhibition of α-thrombin is described. For the lead discovery library 160 members emanate from two N4-aryl-piperazine-2-carboxylic acid scaffolds derivatized in two dimensions employing a combinatorial approach on solid support. The targeted library was based on peptidomimetics of the D-Phe-Pro-Arg showing the scaffolds cyclopropane-1R,2R-dicarboxylic acid and (4-amino-3-oxo-morpholin-2-yl)- acetic acid as proline isosters. Employing 4-aminomethyl-benzamidine as arginine mimic and different hydrophobic amines and electrophiles as D-phenylalanine mimics resulted in 34 compounds showing IC50 values for α-thrombin ranging more than three orders of magnitude with the best inhibitor showing an IC50 of 130 nM. Interestingly, the best inhibitors showed reversed stereochemistry in comparison with a previously reported series employing a 3-oxo-morpholin-2-yl-acetic acid scaffold.

The topic of this thesis is the design and synthesis of biaryl-based self adaptableligands for asymmetric metal catalysis. The results discussed in papers I-III are covered, together with some unpublished results concerning substrate-adaptable catalysts. A general survey of self-adaptable catalysts is presented first. The second chapter of this thesis starts with a survey of inversion barriers in biphenyl-based ligands and catalysts. Thereafter, the determination of barriers to conformational adaptation in dibenzoazepines and dibenzophosphepines is described. Palladium complexes with a diphosphine ligand or a diamine ligand, as well as the free diamine ligand, were studied. Entropies and enthalpies of activation were determined with variable temperature NMR spectroscopy. The mechanism of conformational change in the metal complexes was elucidated. The third chapter describes the synthesis of semiflexible and rigid phosphinite ligands, as well as their application in rhodium-catalysed asymmetric hydrogenation. Modest enantioselectivities (up to 63% ee) were obtained. The semiflexible ligand was found to behave like the most active rigid diastereomer. The fourth chapter describes the behaviour of amine and phosphoramidite ligands in model complexes relevant to the palladium-catalysed asymmetricallylic alkylation of benchmark substrates. Diphosphoramidite and aminephosphoramiditeligands were designed and synthesised. Pd(olefin) complexesof diamine and diphosphoramidite ligands were studied, and their symmetry determined. It was found that both types of ligands are able to adapt their conformation to the substrate. / QC20100630

This thesis deals with the development and application of methods for asymmetric olefinations, in particular Horner-Wadsworth-Emmons (HWE) reactions, in the synthesis of certain natural products. Relying on asymmetric HWE reactions to access key building blocks, two natu-ral products, pyranicin and pyragonicin, were synthesized from common late intermediates. The utility of the HWE reactions is highlighted through a desymmetrization of a meso-dialdehyde as well as a stereoconvergent reaction sequence employing the sequential use of a HWE parallel kinetic resolution fol-lowed by a Pd-catalyzed allylic substitution to convergently transform a race-mate to a single stereoisomer of the product. Methodological extensions of these syntheses include a divergent synthesis of 2,3,6-substituted tetrahydropyran derivatives and application of Zn-mediated asymmetric alkynylations to install key stereocenters. Synthetic studies directed towards a more complex target, mucocin, employing a triply convergent strategy, have also been performed. Expedient and reliable routes to three key fragments were developed, as well as methodology to access to all nine stereocenters. The fragment coupling to assemble the oligonuclear core still remains a challenge, however. Key features of the synthesis include the formation of two fragments from a common precursor derived from an asymmetric HWE desymmetrization, Zn-mediatedated asymmetric alkynylations, a stereoselective oxa-Michael cyclization dependent on a simultaneous protective group migration and a one-pot procedure for the synthesis of a TBS protected iodohydrin from a terminal epoxide. An investigation of the possibilities for developing a transition metal catalyzed asymmetric olefination using a chiral Re-complex is outlined. An enantioen-riched BINAP-Re complex was synthesized and characterized by X-ray. An efficient protocol for the olefination of functionalized aldehydes employing this catalyst was developed, but gave racemic products in two attempted kinetic resolutions of racemic substrates, most likely due to a reaction pathway proceeding via a non-metal associated phosphonium ylide. / QC 20100921

This thesis deals with the design and synthesis of ligands for asymmetric catalysis: palladium catalyzed allylic alkylations, and rho-dium and iridium catalyzed hydrogenations of olefins. Chirally flexible phosphepine ligands based on biphenyl were synthesized and their properties were studied. The rotation barrier for configurationally flexible phosphepines was determined by NMR spectroscopy. The ratio of the atropisomers was shown to depend on the group bound to phosphorus. Only complexes with two homochiral ligands bound to the metal center were observed upon complexation with Rh(I). It was shown that one diastereomer of the flexible ligand exhibits higher activity but lower selectivity than its diastereomer in the rhodium catalyzed hydrogenation of methyl alfa-acetamidocinnamate. These ligands were also tested in nickel catalyzed silabora-tions. Chiral P,N-ligands with pseudo-C2 and pseudo-CS symmetry based on pyrrolidines-phospholanes or azepines-phosphepines were synthesized and studied in palladium catalyzed allylic alkylations. Semi-flexible azepine-phosphepine based ligands were prepared and their ability to adopt pseudo-C2 or pseudo-CS symmetry depending on the substrate in allylic alkylations was studied. It was shown on model allyl systems with flexible N,N-ligands that the ligand prefers CS-symmetry in compexes with anti-anti as well as syn-syn allyl moieties, but that for the latter type of complexes, according to computations, the configuration of the ligand is R*,R* in the olefin complexes formed after addition of a nucleophile to the allylic group. A preliminary investigation of the possibilities to use a su-pramolecular approach for the preparation of P,N-ligands with pseudo-C2 and pseudo-S symmetry was made. An N,N-ligand with C2 symmetry was prepared and its activity in palladium catalyzed ally-lic alkylation was studied. Pyridine-based P,N-ligands were tested in iridium catalyzed hy-drogenations of unfunctionalized olefins with good activities and se-lectivities. In order to attempt to improve the selectivity, ligands with a chirally flexible phosphepine fragment were prepared and applied in catalysis with promising results. / QC 20100929

This thesis deals with the design, formation and evaluation of dynamic systems constructed by means of sulfur-containing reversible reactions, in organic and aqueous media and under mild conditions. In a first part, the synthesis of thioglycoside derivatives, constituting the biologically relevant starting components of the dynamic systems, is described. In addition, the pD-profile of the mutarotation process in aqueous media for a series of 1-thioaldoses is reported and revealed an astonishing beta-anomeric preference for all the carbohydrate analogs under acidic or neutral conditions. In a second part, the phosphine-catalyzed or -mediated disulfide metathesis for dynamic system generation in organic or aqueous media is presented, respectively. The direct in situ 1H STD-NMR resolution of a dynamic carbohydrate system in the presence of a target protein (Concanavalin A) proved the suitability and compatibility of such disulfide metathesis protocols for the discovery of biologically relevant ligands. In a third part, hemithioacetal formation is demonstrated as a new and efficient reversible reaction for the spontaneous generation of a dynamic system, despite a virtual character of the component associations in basic aqueous media. The direct in situ 1H STD-NMR identification of the best dynamic beta-galactosidase inhibitors from the dynamic HTA system was performed and the results were confirmed by inhibition studies. Thus, the HTA product formed from the reaction between 1-thiogalactopyranose and a pyridine carboxaldehyde derivative provided the best dynamic inhibitor. In a fourth and final part, a dynamic drug design strategy, where the best inhibitors from the aforementioned dynamic HTA system were used as model for the design of non-dynamic (or “static”) beta-galactosidase inhibitors, is depicted. Inhibition studies disclosed potent leads among the set of ligands. / QC 20100621

This thesis is divided into six parts, all centered around the development of dynamic (i.e., reversibly interacting) systems of molecules and their applications in dynamic combinatorial chemistry (DCC) and organic synthesis. Part one offers a general introduction, as well as a more detailed description of DCC, being the central concept of this thesis. Part two explores the potential of the nitroaldol reaction as a tool for constructing dynamic systems, employing benzaldehyde derivatives and nitroalkanes. This reaction is then applied in part three where a dynamic nitroaldol system is resolved by lipase-catalyzed transacylation, selecting two out of 16 components. In part four, reaction and crystallization driven DCC protocols are developed and demonstrated. The discovery of unexpected crystalline properties of certain pyridine β-nitroalcohols is used to resolve a dynamic system and further expanded into asynthetic procedure. Furthermore, a previously unexplored tandem nitroaldol-iminolactone rearrangement reaction between 2-cyanobenzaldehyde and primarynitroalkanes is used for the resolution of dynamic systems. It is also coupled with diastereoselective crystallization to demonstrate the possibility to combine several selection processes. The mechanism of this reaction is investigated and a synthetic protocol is developed for asymmetric synthesis of 3-substituted isoindolinones. Part five continues the exploration of tandem reactions by combining dynamic hemithioacetal or cyanohydrin formation with intramolecular cyclization to synthesize a wide range of 3-functionalized phthalides. Finally, part six deals with the construction of a laboratory experiment to facilitate the introduction of DCC in undergraduate chemistry education. The experiment is based on previous work in our group and features an acetylcholinesterase-catalyzed resolution of a dynamic transthioacylation system. / QC 20100628

New strategies are needed to counter the growing problem of bacterial resistance to antibiotics. One such strategy is to design compounds that target bacterial virulence, which could work separately or in concert with conventional bacteriostatic or bactericidal antibiotics. Pilicides are a class of compounds based on a ring-fused 2-pyridone scaffold that target bacterial virulence by blocking the chaperone/usher pathway in E. coli and thereby inhibit the assembly of pili. This thesis describes the design, synthesis, and biological evaluation of compounds based on the pilicide scaffold with the goal of improving the pilicides and expanding their utility. Synthetic pathways have been developed to enable the introduction of substituents at the C-2 position of the pilicide scaffold. Biological evaluation of these compounds demonstrated that some C-2 substituents give rise to significant increases in potency. X-ray crystallography was used to elucidate the structural basis of this improved biological activity. Furthermore, improved methods for the preparation of oxygen-analogues and C-7 substituted derivatives of the pilicide scaffold have been developed. These new methods were used in combination with existing strategies to decorate the pilicide scaffold as part of a multivariate design approach to improve the pilicides and generate structure activity relationships (SARs). Fluorescent pilicides were prepared using a strategy where selected substituents were replaced with fluorophores having similar physicochemical properties as the original substituents. Many of the synthesized fluorescent compounds displayed potent pilicide activities and can thus be used to study the complex interactions between pilicide and bacteria. For example, when E. coli was treated with fluorescent pilicides, it was found that the compounds were not uniformly distributed throughout the bacterial population, suggesting that the compounds are primarily associated to bacteria with specific properties. Finally, by studying compounds designed to inhibit the aggregation of Aβ, it was found that some compounds based on the pilicide scaffold inhibit the formation of the functional bacterial amyloid fibers known as curli; these compounds are referred to as 'curlicides'. Some of the curlicides also prevent the formation of pili and thus exhibit dual pilicide-curlicide activity. The potential utility of such 'dual-action' compounds was highlighted by a study of one of the more potent dual pilicide-curlicides in a murine UTI model were the compound was found to significantly attenuate virulence in vivo.