[pt] Ao longo das últimas décadas, a cidade do Rio de Janeiro vem sofrendo com vários eventos de queda de blocos de rochas que não podem ser relacionados a quaisquer fatores desencadeantes evidentes, como temporadas de chuva ou eventos sismicos. Assim, outros possíveis fenômenos iniciais ou causas foram avaliados e as variações térmicas naturais parecem ser um dos fatores desencadeantes que contribuem para esses eventos. O mecanismo associado à flutuação diária de temperatura é capaz de gerar deslocamentos irreversíveis, sendo um fator preparatório para as quedas de rochas. Em maciços rochosos fraturados, os blocos de rochas se expandem, empurram outros blocos em sua volta, se contraem, podendo ou não voltar para sua posição de origem, gerando movimentos cíclicos. O proposito principal deste trabalho é estudar o comportamento mecânico e hidráulico de descontinuidades de rochas gnáissicas sob carregamento cíclico cisalhante pré-pico para diferentes tipos de JRC (Joint Roughness Coefficient), variações da tensão normal entre 100 e 1000 kPa e da frequência entre 0,1 e 0,01 Hz, garantindo uma velocidade quase estática, simulando as condições de temperatura no campo. Foi possível verificar que o comportamento dos deslocamentos irreversíveis das amostras ensaiadas foi influenciado pela tensão cisalhante de pré-pico para tensões normais e frequências baixas e para tensões normais altas o deslocamento foi constante e quase estático, diminuindo pouco a resistência ao cisalhamento em 2000 ciclos e gerando níveis de deslocamentos irreversíveis bem mais baixos. / [en] Over the last few decades, the city of Rio de Janeiro has been suffering from several rockfall events that cannot be related to any obvious triggering factors such as rainy seasons or earthquakes. Thus, other possible initial phenomena or causes were evaluated and natural thermal variations seem to be one of the triggering factors that contribute to these events. The mechanism associated with the daily fluctuation of temperature is capable of generating irreversible displacements, being a preparatory factor for rockfalls. In fractured rock mass, rock blocks expand, push other blocks around them, contract, and may or may not return to their original position, generating cyclical movements. The main purpose of this work is to study the mechanical and hydraulic behavior of gneiss rock discontinuities under pre-peak cyclic shear loading for different types of JRC (Joint Roughness Coefficient), normal stress variations between 100 and 1000 kPa and frequency variations between 0.1 and 0.01 Hz, ensuring an almost static speed, simulating the temperature conditions in the field. It was possible to verify that the behavior of the irreversible displacements of the tested samples was influenced by the pre-peak cyclic shear for normal stresses and low frequencies and for high normal stresses the displacement was constant and almost static, decreasing the shear strength in 2000 cycles and generating much lower levels of irreversible displacements.

Modern wireless mobile communication technology has made noticeable improvements from the technologies in the past but is still plagued by poor power efficiency of power amplifiers found in today’s base stations. One of the factors that affect the power efficiency adversely comes from modern modulation techniques like orthogonal frequency division multiplexing which result in signals with high peak to average power ratio, also known as the crest factor. Crest factor reduction algorithms are used to solve this problem. However, the dominant method of hardware description for synthesis has been to start with writing register transfer level code which gives a very fixed implementation that may not be the optimal solution. This thesis project is focused on developing a peak cancellation crest factor reduction system, using a high-level language as the system design language, and synthesizing it using high-level synthesis. The aim is to find out if highlevel synthesis design methodology can yield increased productivity and improved quality of results for such designs as compared to the design methodology that requires the system to be implemented at the register transfer level. Design space exploration is performed to find an optimal design with respect to area. Finally, a few parameters are presented to measure the performance of the system, which helps in tuning it. The results of design space exploration helped in choosing the best possible implementation out of four different configurations. The final implementation that resulted from high-level synthesis had an area comparable to the previous register transfer level implementation. It was also concluded that, for this design, the high-level synthesis design methodology increased productivity and decreased design time. / Användning av högnivåsyntes för reduktion av toppfaktor Det har gjorts noterbara framsteg inom modern trådlös kommunikationsteknik för mobiltelefoni, men tekniken plågas fortfarande av dålig energieffektivitet hos förstärkarna i dagens basstationer. En faktor som påverkar energieffektiviteten negativt är om signaler har en stor skillnad mellan maximal effekt och medeleffekt. Kvoten mellan maximal effekt och medeleffekt kallas för toppfaktor, och en egenskap hos moderna moduleringstekniker, såsom ortogonal frekvensdelningsmodulering, är att de har en hög toppfaktor. Algoritmer för reducering av toppfaktor kan lösa det problemet. Den dominerande metoden för design av hårdvara är att skriva kod i ett hårdvarubeskrivande språk med abstraktionsnivån Register Transfer Level och sedan använda verktyg för att syntetisera hårdvara från koden. Resultatet är en specifik implementation som inte nödvändigtvis är den optimala lösningen. Det här examensarbetet är inriktat på att utveckla ett system för reducering av toppfaktor, baserat på algoritmen Peak Cancellation, genom att skriva kod i ett högnivåspråk och använda verktyg för högnivåsyntes för att syntetisera designen. Syftet är att ta reda på om högnivåsyntes som designmetod kan ge ökad produktivitet och ökad kvalitet, för den här typen av design, jämfört med den klassiska designmetoden med abstraktionsnivån Register Transfer Level. Verktyget för högnivåsyntes användes för att på ett effektivt sätt undersöka olika designalternativ för att optimera kretsytan. I rapporten presenteras ett antal parametrar för att mäta prestandan hos systemet, vilket ger information som kan användas för finjustering. Resultatet av undersökningen av designalternativ gjorde det möjligt att välja den bästa implementationen bland fyra olika konfigurationer. Den slutgiltiga implementationen hade en kretsyta som är jämförbar med en tidigare design som implementerats med hårdvarubeskrivande språk med abstraktionsnivån Register Transfer Level. En annan slutsats är att, för den här designen, så gav designmetoden med högnivåsyntes ökad produktivitet och minskad designtid.

Societal developments are associated with land use change, and with urbanization in particular. Urbanization can influence hydrological processes by decreasing evapotranspiration and infiltration as well as by increasing streamflow, peak flow and overland flow. This causes higher risks of flooding. Although several studies have investigated the impacts of urbanization on streamflow over the last decades, less is known about how urbanization affects the hydrological processes in peri-urban areas characterized by a complex mosaic of different land uses. This study aimed to model the impact of land use change, or more specifically urbanization, on the hydrological responses of the small peri-urban Ribeira dos Covões catchment (6.2 km2) located in central Portugal. The catchment has undergone rapid land use change since the mid- 1950s associated with conversion of agricultural fields (decreased from 48 to 4%) into woodland and urban areas, which increased from 44 to 56% and from 8 to 40%, respectively. For the study, the hydrological modelling system MIKE SHE was used. Parameters and data of climate, vegetation and soil types were used as input. There were also land use maps and daily streamflow values available for the hydrological years 2008/09 to 2012/13, which were used to calibrate and validate the model. The statistics from the calibration and validation both indicated that the model simulated the streamflow well. The model was designed to examine both how past land use change might have affected the streamflow, and to investigate the impacts on hydrology if the urban area was to be increased to cover 50% of the catchment. It was not only the importance of the urban cover’s size that was tested, but also the placement of additional urban areas. Three future scenarios were run, all with a 50% urban cover, but distributed differently within the catchment. The study did not indicate that an increase in urbanization leads to higher peak flow or streamflow. Neither could any decrease in infiltration be seen. All three scenarios however gave an increase in overland flow of approximately 10% and a decrease in evapotranspiration by 55%, regardless of where the urban areas were added. The reliability of the models can be enhanced by additional climate, soil and vegetation data. This would improve the results and make them more useful in decision making processes in the planning and management of new urban areas. / Samhällets ständiga utveckling medför förändringar i markanvändning. Utvecklingen och förändringarna är framför allt associerade med urbanisering som kan påverka ett avrinningsområdes hydrologiska processer genom att exempelvis reducera dess evapotranspiration och infiltration samt öka vattenföringen, högsta flödet och ytavrinningen. Det i sin tur ökar risken för översvämning. Trots att många studier har undersökt urbaniseringens inverkan på vattenföring de senaste decennierna saknas viss kunskap om dess påverkan på hydrologin i stadsnära avrinningsområden, kännetecknade av flera olika typer av markanvändning. Denna studie syftade till att modellera hur förändringar i markanvändning, eller mer specifikt urbanisering, påverkar hydrologin i det lilla stadsnära avrinningsområdet Ribeira dos Covões (6,2 km2) i centrala Portugal. Avrinningsområdet har genomgått snabba markanvändningsförändringar sedan mitten av 1950-talet i samband med en omvandling av åkrar (täckningsarean har minskat från 48 till 4 %) till skogsmark och urbaniserade områden, vilkas storlek har ökat från 44 till 56 % respektive 8 till 40 %. För att uppfylla syftet har den hydrologiska modellen MIKE SHE använts. Parametrar avseende klimat samt vegetations- och jordegenskaper användes som indata till modellen. Det fanns också tillgång till en markanvändningskarta över området samt dagliga flödesvärden mellan de hydrologiska åren 2008 och 2013. Dessa användes för att kalibrera och validera modellen. Statistiken för både kalibreringen och valideringen indikerade en fullt acceptabel modell. Modellen var avsedd att undersöka dels hur tidigare förändring i markanvändning kan ha påverkat vattenföringen, dels för att studera effekten på hydrologin om urbaniseringen fortgår tills dess täckning är 50 % av avrinningsområdet. Det var inte bara betydelsen av de urbana ytornas storlek som testades, utan även placeringen av dem. Tre framtidsscenarier togs fram, alla med en urban yta på 50 % fördelad olika inom avrinningsområdet. Studien indikerade inte att ytterligare urbanisering ökar vare sig flödet eller det högsta flödet. Inte heller gav de någon minskning av infiltration. Alla tre scenarierna gav emellertid en ökning av ytavrinningen med cirka 10 % och en minskning av evapotranspirationen med 55 %, oavsett placering av de urbana ytorna. Modellernas tillförlitlighet skulle kunna förbättras med hjälp av ytterligare klimat-, vegetations- och jordindata. Det skulle förbättra resultaten och göra dem användbara i beslutsfattanden vid planering och utveckling av nya urbana områden.

South Africa is in the critical process of determining the profile of its power composition for the next 30 years and beyond. From the IRP2010 it seems that too much emphasis is placed on renewable energy, coal and other technologies and too little on nuclear power. In the revision of the IRP2010, the renewable portion of the energy composition has been increased substantially from 11.4 to 17.8GW, where nuclear remains on 9.6GW (DME, 2011). The purpose of this research is to investigate and compare power-generating technologies. The investigation of the different technologies is corroborated through modelling the IRP2010 planned energy mix efficiency, as well as a proposed energy mix. These models will be built using Microsoft Excel. Topics not investigated are socio-economic impacts and politics around nuclear energy in South Africa. The main finding of the research is that nuclear power is the best option for base load energy in order to meet South Africa‟s growing demand for electricity. It has the highest load factor, longest economic life, best safety record, adheres to the Kyoto protocol, uses the least fresh water and is economically competitive. It addresses all the concerns stipulated in the IRP2010 and the technology also offers benefits outside the electricity industry, such as the mining, medical, agriculture and research sectors. This versatile, reliable and powerful technology holds great benefits and has the potential to uplift the quality of life for the whole South African nation. / MSc (Nuclear Engineering), North-West University, Potchefstroom Campus, 2015

South Africa is in the critical process of determining the profile of its power composition for the next 30 years and beyond. From the IRP2010 it seems that too much emphasis is placed on renewable energy, coal and other technologies and too little on nuclear power. In the revision of the IRP2010, the renewable portion of the energy composition has been increased substantially from 11.4 to 17.8GW, where nuclear remains on 9.6GW (DME, 2011). The purpose of this research is to investigate and compare power-generating technologies. The investigation of the different technologies is corroborated through modelling the IRP2010 planned energy mix efficiency, as well as a proposed energy mix. These models will be built using Microsoft Excel. Topics not investigated are socio-economic impacts and politics around nuclear energy in South Africa. The main finding of the research is that nuclear power is the best option for base load energy in order to meet South Africa‟s growing demand for electricity. It has the highest load factor, longest economic life, best safety record, adheres to the Kyoto protocol, uses the least fresh water and is economically competitive. It addresses all the concerns stipulated in the IRP2010 and the technology also offers benefits outside the electricity industry, such as the mining, medical, agriculture and research sectors. This versatile, reliable and powerful technology holds great benefits and has the potential to uplift the quality of life for the whole South African nation. / MSc (Nuclear Engineering), North-West University, Potchefstroom Campus, 2015

<p>In order to understand how waves influence the exchange of momentum, latent heat and other parameters, between the ocean surface and the atmosphere, one can use models. A coupling between a wave model and an atmospheric regional climate model, for the Baltic Sea, will be performed at the Meteorology Institute in Uppsala University. The wave model is a state of the art, third generation wave model called WAM.</p><p>The new version of the WAM model (cycle 4) needs to be validated. The aim of this thesis is to perform this validation and also to investigate what meteorological forcing one should use to achieve best results. Two different types of forcing are analyzed, ERA40 reanalysis and the RCA climate model. In order to do this, observations from six different buoys in the Baltic Sea will be compared with the model output from WAM. The parameters that will be compared in this study are significant wave height, direction and peak period.</p><p>A consistent phenomenon for all the buoys is a slightly overestimation by the model of what the rate of this increases with increasing wave height. If one compares the model output when WAM are forced with the RCA climate model and when it is forced with ERA40 reanalysis, the differences between them are notable but not large. ERA40 is slightly better.</p><p>Significant wave height is quite good and gives a reasonably result. Some buoys and periods are better and some are worse. There are some differences for the significant wave height between the east coast and the west coast of Sweden, when forcing the model with RCA. It is slightly better on the west coast. On the contrary, the results from ERA40 are very coherent. The quality of the hindcast for the direction and the peak period, in contrast to the significant wave height, is not that good. The results are not bad, but it only gives a rough picture of the sea state.</p>

Darbe apžvelgtos užsienio valstybių centralizuoto šilumos tiekimo (CŠT) sistemų darbo režimai ir pagrindiniai parametrai. Išskirtinai atsižvelgta į CŠT sitemas, kuriose yra kogeneracinės jėgainės su šilumos akumuliavimo talpomis. Darbe pateikiami pavyzdžiai, kokios gali būti ir kaip pritaikomos šilumos akumuliavimo talpos. Tokių sistemų pagrindiniai privalumai yra tai, jog naudojantis ŠAT sistema galima subalansuoti CŠT sistemose esančių įrenginių darbo režimus, taip pat esant kogeneracinėms jėgainėms galima pereinant nuo šilumos vartojimo grafiko jų darbą adaptuoti prie elektros vartojimo grafiko. Darbe analizuojamas Mažeikių miesto šilumos tiekimo sistemos darbas esant kogeneracinėms jėgainėms su šilumos akumuliacijos talpomis. Modeliuoti galimi įrenginių darbo režimai dviem prioritetais: pastoviosios galios ir maksimaliosios pikinės elektros energijos gamybos. Gauta, kad efektyvus šilumos akumuliacijos kiekis turėtų būti 200 MWh tai – atitiktų 4 tūkst. m3 talpą dirbant Mažeikių ŠT darbo parametrais. Nustatyta, kad valandinis ŠAT sistemos prijungimo vamzdžių pralaidumas turi būti 17 MW. Ekonominėje dalyje vertinamas ŠAT sistemos pelningumas. ŠAT sistemos pelningumas dirbant pastovios galios režimu yra neigiamas, taigi projektas būtų ekonomiškai nenaudingas, tačiau ŠAT sistemą naudojant pikinės elektros gamybai pelningumas svyruotų nuo -0,5 mln. Lt iki 0,9 mln. Lt, priklausomai nuo to, kaip susiformuos pikinės elektros rinka. / The thesis surveys working regimes and main parameters of centrally supplied heat (CSH) systems of foreign states. The exclusive attention is paid to CHS systems, having combined heat and power plans with heat accumulation tanks. Examples are provided in the thesis of the types of heat accumulation tanks and their application. The main advantages of such systems are that working regimes of devices in the CHS systems may be balanced with the help of HAT system, as well as that their work may be adapted from heat usage schedule to electricity usage schedule, if combined heat and power plants are used. The thesis analyzes the work of Mažeikiai town heat supply system, having combined heat and power plants with heat accumulation tanks. Possible working regimes of devices in two priorities have been modelled: fixed power and maximum peak electric power production. It has been received that the efficient quantity of heat accumulation should be 200 MWh; this would conform to 4 thousand m3 tank under Mažeikiai HS working parameters. It has been determined that the hourly capacity of pipeline of HAT system connection must be 17 MW. Economical part evaluates profitability of HAT system. HAT system’s profitability, using the fixed power for maintenance is negative; the project would be economically unprofitable; however using HAT system for production of peak electric power, profitability would fluctuate from -0.5 million LTL to 0.9 million LTL, depending on formation of peak... [to full text]

Context: It has been suggested that muscle fatigue can lead to injury, however, research investigating this phenomenon in functional ankle instability (FAI) subjects is lacking. Aim: The purpose of this thesis was to research postural sway and muscular latency in FAI subjects and healthy controls, both before and immediately after localised and globalised fatigue protocols. Subjects: All subjects used in this project were males, between the ages of 18 and 25 years, and participated in regular (&gt;2 x week) aerobic exercise. Subjects were categorised into healthy subjects, or subjects with a history of FAI using the FAI questionnaire. Methods: Neuromuscular control was analysed in FAI subjects and healthy controls through measures of muscular latency and postural sway. These measures were repeated both before and immediately after localised and globalised fatigue protocols. Results: The induction of localised and globalised fatigue had no effect on muscle latency in the FAI or healthy subjects. However, postural sway was significantly increased in the FAI subjects, following localised and globalised fatigue, with globalised fatigue also significantly increasing postural sway in the healthy subjects. The globalised football-specific fatigue protocol caused the greatest deficits in the FAI subjects, but also the healthy controls. Conclusions: In terms of muscle latency individuals that participate in sports, as well as sports clinicians and coaches, should not be concerned about the theorised relationship between the onset of fatigue and an increased injury risk at the ankle. However, in terms of postural sway the globalised football-specific fatigue protocol caused the greatest deficits. This highlights that the fatigued individual may be at greater risk of musculoskeletal injury during prolonged exercise that involves multiple joints, such as a football match.

The presence of deposits on the secondary side of pressurized water reactor (PWR) steam generator systems is one of the main contributors to the high maintenance costs of these generators. Formation and transport of corrosion products formed due to the presence of impurities, metals and metallic oxides in the secondary side of the steam generator units result in formation of deposits. This research deals with understanding the deposit formation and characterization of deposits by studying the samples collected from different units in secondary side system at Comanche Peak Steam Electric Station (CPSES). Fourier transform infrared spectrophotometry (FTIR), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) have been used for studying the phases, morphologies and compositions of the iron oxides formed at Unit 1 and Unit 2 of secondary side of steamgenerator systems. Hematite and magnetite were found to be the dominant phases of iron oxides present in the units. Fe, Cr, O, Ni, Si, Cl and Cu were found in samples collected from both the units. A qualitative method was developed to differentiate iron oxides using laser induced breakdown spectroscopy (LIBS) based on temporal response of iron oxides to a high power laser beam. A quantitative FTIR technique was developed to identify and quantify iron oxides present in the different components of the secondary side of the steam generator of CPSES. Amines are used in water treatment to control corrosion and fouling in pressurized water reactors. CPSES presently uses an amine combination of dimethylamine (DMA), hydrazine and morpholine to control the water chemistry. Along with the abovementioned amines, this study also focuses on corrosion inhibition mechanismsof a new amine DBU (1, 8-diazabicyclo [5.4.0] undec-7-ene). Electrochemical impedance spectroscopy and polarization curves were used to study the interaction mechanism between DBU solution and inconel alloys 600 and 690 at steamgenerator operating temperatures and pressures. Of all the amines used in this study (DMA, DBU, ETA, and morpholine), DMA was more effective at keeping the passive film formed on the alloy 600 surface from failing at both ambient and high temperatures. Morpholine was found result in higher corrosion resistance compared to the other amines in case of alloy 690.

Listening to music usually elicits emotions that can vary considerably in their intensity over the course of listening. Yet, after listening to a piece of music, people are easily able to evaluate the music's overall emotional intensity. There are two different hypotheses about how affective experiences are temporally processed and integrated: (1) all moments' intensities are integrated, resulting in an averaged value; (2) the overall evaluation is built from specific single moments, such as the moments of highest emotional intensity (peaks), the end, or a combination of these. Here we investigated what listeners do when building an overall evaluation of a musical experience. Participants listened to unknown songs and provided moment-to-moment ratings of experienced intensity of emotions. Subsequently, they evaluated the overall emotional intensity of each song. Results indicate that participants' evaluations were predominantly influenced by their average impression but that, in addition, the peaks and end emotional intensities contributed substantially. These results indicate that both types of processes play a role: All moments are integrated into an averaged value but single moments might be assigned a higher value in the calculation of this average.