Les matériaux métalliques sont utilisés dans des conditions de plus en plus sévères et doivent présenter une parfaite intégrité sur des périodes de plus en plus longues. L’objectif de ce travail de thèse est d’évaluer le potentiel d'un traitement de refusion laser pour améliorer la résistance à la corrosion d'un acier inoxydable de type 304L ; l’utilisation du laser dans le domaine des traitements de surface constituant un procédé en pleine évolution à cause des changements récents dans la technologie des lasers. Dans le cadre de ce travail, le choix du laser s’est porté sur un laser nano-impulsionnel à fibre dopée ytterbium dont les caractéristiques permettent la fusion quasi-instantanée sur quelques microns de la surface traitée, immédiatement suivie d'une solidification ultra-rapide avec des vitesses de refroidissement pouvant atteindre 1011 K/s. La combinaison de ces processus favorise l'élimination des défauts surfaciques, la formation de phases hors équilibre, la ségrégation d’éléments chimiques et la formation d’une nouvelle couche d’oxyde dont les propriétés sont gouvernées par les paramètres laser. Afin de les corréler avec la réactivité électrochimique de la surface, l’influence de deux paramètres laser sur les propriétés physico-chimiques de la surface a été étudiée : la puissance du laser et le taux de recouvrement des impacts laser. Pour clarifier ces relations, la résistance à la corrosion par piqûration des surfaces traitées a été déterminée par des tests électrochimiques. Pour des paramètres laser spécifiques, le potentiel de piqûration d'un acier inoxydable de type 304L augmente de plus de 500 mV traduisant ainsi une meilleure tenue à la corrosion localisée en milieu chloruré. L’interdépendance des différents phénomènes résultant du traitement laser a rendu complexe la hiérarchisation de leur effet sur la sensibilité de l’alliage testé. Cependant, il a été montré que la nature de l’oxyde thermique formé au cours de la refusion laser et ses défauts sont du premier ordre pour l’amorçage des piqûres. / Metallic materials are more and more used in severe conditions with particularly strong request for improving their behavior in aggressive environment and especially over long periods. The objective of this PhD work is to estimate the potentiality of a laser surface melting treatment on the improvement of the stainless steel 304L corrosion resistance, surface treatments by laser can be revisited on the basis of a recent change in the laser technology. In the frame of this work, a nano-pulsed laser fiber was chosen : it allows the treated surface to be melted for few microns in depth, followed by an ultra-fast solidification occuring with cooling rates up to 1011 K/s. The combination of these processes leads to the elimination of the surface defects, the formation (trapping) of metastable phases, the segregation of chemical elements and the growth of a new oxide layer which properties are governed by the laser parameters. To correlate these latter to the electrochemical reactivity of the surface, the influence of two laser parameters on the physico-chemical properties of the surface was studied : the laser power and the overlap of the laser impacts. To support this approach, the pitting corrosion resistance of the samples was determined by standard electrochemical tests. For specific laser parameters, the pitting potential of a 304L stainless steel was increased by more than 500 mV corresponding to an important enhancement in localized corrosion resistance in chloride environment. The interdependence of the different phenomena resulting from the laser treatment lead to a quite complex prioritization of their role on the sensibility of the 304L. However, it was demonstrated that the nature of the thermal oxide formed during the laser surface melting and the induced defects are first-order parameters for the initiation of pits.

L'exposition à la pollution atmosphérique, notamment aux particules fines (PM₂.₅), représente un risque majeur pour la santé dans le monde entier, et d'autant plus dans les pays en développement.Le Nord du Liban est ainsi affecté par plusieurs sources de pollution d'origine anthropique, urbaine et industrielle. Pourtant, dans cette région, aucune étude ne s'est intéressée à l'impact des PM₂.₅ sur la santé publique. Il faut également souligner que les mécanismes de toxicité des PM₂.₅ ne sont pas totalement identifiés. Le but de ce travail est d'étudier la nature et l'impact sanitaire de la pollution atmosphérique particulaire dans le Nord du Liban. Nous avons procédé à une enquête épidémiologique, et prélevé des particules fines que nous avons caractérisées sur les plans physico-chimiques et toxicologiques. Deux régions ont été considérées dont une est située à proximité d'activités industrielles. L'étude épidémiologique et de perception menée dans les deux zones du Nord du Liban (310 questionnaires/zone traitée), a montré une relation entre gêne, maladies respiratoires et proximité des industries. Cette enquête a ainsi confirmé l'intérêt de mener une étude toxicologique dans cette région. Afin de renforcer les connaissances sur la toxicité pulmonaire des aérosols atmosphériques particulaires avec une attention toute particulière portée à l'étude de certains des mécanismes d'action suspectés d'être impliqués dans la cancérogénécité, les caractéristiques physico-chimiques et toxicologiques des particules fines (PM₂.₅₋₀.₃) prélevées sur les deux sites ont été étudiées. Les particules collectées ont montré une composition similaire sur les deux sites concernant les espèces majeures. La contribution des activités industrielles a été mise en évidence par des teneurs légèrement plus élevées de certains éléments traces, d'HAP et surtout par une teneur jusqu'à 100 fois plus élevée en dioxines. Nos résultats ont mis en évidence l'influence de nombreuses sources de combustion (diesel, essence, charbon et biomasse) ; la combustion de déchets et d'autres procédés industriels sont également suspectées. Un potentiel génotoxique et mutagène plus prononcé a été mis en évidence pour les particules collectées sur le site sous influence industrielle par rapport aux particules provenant du site sous influence rurale, à l'aide du test d'Ames en milieur liquide et le SOS chromotest. Les effets observés sont très probablement influencés par la fraction organique des particules. Afin d'approfondir la recherche des mécanismes génotoxiques des PM, des cellules bronchiques humaines (BEAS-2B) ont été exposées à différentes concentrations de particules. Les mécanismes de toxicité, tels que l'activation métabolique des HAP(CYP1A1) et les cassures double-brins (quantification de yH2AX par cytométrie de flux et in-cell western), ont été induits par les deux échantillons de PM₂.₅₋₀.₃ avec un effet plus prononcé pour les particules industrielles. Par ailleurs, les PM ont montré une tendance à perturber le fonctionnement du système de réparation de l'ADN (par l'expression des gènes OGG1, NTH1, APE1, NUDT1, DNMT1, MGMT, XPA et XRRC1, et l'expression des protéines PARP1, DNMT1 et OGG1). Les mécanismes de réparation des dommages de l'ADN ont ainsi été réprimés jusqu'à 48h d'exposition aux PM, notamment aux PM₂.₅₋₀.₃ collectées sous influence industrielle, et réactivés après 72h d'exposition. Ces dommages concernent les adduits encombrants à l'ADN, et ceux causés par le stress oxydant, des cassures des brins d'ADN et la méthylation. Nos résultats suggèrent des mécanismes d'action mutagènes, génotoxiques et épigénétiques impliqués dans la cancérogénécité des particules fines, en partie liés à la composition de la fraction organique. / Exposure to air pollution, especially fine particulate matter (PM₂.₅), remains a major health risk, mainly in the developing countries. Northern Lebanon is affected by several sources of anthropogenic, urban and industrial pollution. However, no studies have examined the impact of PM₂.₅ on public health in this region. In addition, it should be noted that the toxicity mechanisms of PM₂.₅ are not fully identified. The aim of this work is to study the composition and the health impact of the atmospheric particulates in Northern Lebanon. An epidemiological survey was performed and fine particles were extracted and characterized physico-chemically and toxicologically. This study was conducted in two sites, one of which is influenced by industrial activities. Perception and epidemiological survet, conducted in two areas in Northern Lebanon, rural and industrial (310 treatable questionnaires/area), showed a relationship between annoyance, respiratory diseases and living in proximity to industrial activities. Moreover, results confirmed the interest in conducting a toxicological study in this region. Hence, to contribute to fulfill the gap of knowledge about the pulmonary toxicity of particulate matter and the mechanisms of action involved in the carcinogenicity, the study of physicochemical characteristics and toxicological endpoints of PM₂.₅₋₀.₃ from both sites were performed. Physicochemical analyses of the collected particles evidenced similar characteristics in major species. In particular, we have shown slightly higher levels of PAHs and trace metals and up to 100 times higher dioxins concentrations at the vicinity of industries. Our results evidenced the influence of numerous combustion sources (diesel, gasoline, coal and biomass burning) ; waste combustion and other industrial processes are also suspected. A more pronounced genotoxic and mutagenic potential was evidenced after exposure to particles collected at the vicinity of industries when compared to the rural ones, using the Ames fluctuation test and SOS chromotest. The effects of the collected particles are probably related to their organic composition. In order to assess the underlying toxic mechanisms, human bronchial epithelial cells (BEAS-2B) were then exposed to different concentrations of the sampled PM₂.₅₋₀.₃. Genotoxicity mechanisms such as metabolic activation of organic compounds (CYP1A1) and consecutive DNA damages such as DNA strands breaks (yH2AX quantification by flow cytometry analysis and in-cell western assay) were induced by the two samples of PM₂.₅₋₀.₃ , with a more pronounced effect of industrial particles. Moreover, PM showed tendency to alter the DNA repair process (OGGI, NTH1, APE1, NUDT1, DNMT1, MGMT, XPA, XRRC1 gene expression and PARP1, DNMT1, OGG1 proteins expression). DNA repair mechanisms were repressed up to 48h of exposure to PM especially to the industrial influenced PM₂.₅₋₀.₃ and reactivated after 72h of exposure. The DNA damages involve bulky DNA adducts, oxidative stress damages, DNA strand breaks and methylation. These results suggest mutagenic, genotoxic and epigenetic mechanisms of action involved in the carcinogenicity of fine particles, partly related to their organic composition.

Environ 3% des antiprotons (p) stoppés dans l'heliurn survivent plusieurs microsecondes contre quelques picosecondes dans tout autre matériau. Cette métastabilité inhabituelle résulte d'une capture sur des états liés de l'atome exotique pHe+, dénommé atomcule car il s'apparente à la fois à un atome de Rydberg quasi-circulaire quasi-classique de grand moment angulaire l ~ n - 1 ~ 37 et à une molécule diatomique composée d'un noyau chargé négativement et caractérisée par une forte excitation rotationnelle J = l. En dehors de cette structure duale originale accessible par spectroscopie laser, la physico-chimie de leur interaction avec d'autres atomes ou molécules a fait l'objet de mesures résolues en état. Alors que les atomcules résistent à des millions de collisions dans l'helium pur, des contaminants moléculaires comme H2 les détruisent immédiatement, même à basse température. Dans le cadre Born-Oppenheimer, nous interprétons l'interaction moléculaire, calculée par des techniques de chimie quantique ab initio, en termes de chemins réactifs classiques, qui présentent des barrières d'activation compatibles avec celles mesurées pour He et H2. Nous montrons par une approche Monte Carlo de trajectoires classiques que la thermalisation détruit fortement les populations initiales, portant la fraction estimée des états de capture à 3 %. Nous étudions aussi la recombinaison dissociative pHé + é + e- dans une approche de trajectoires classiques pour les noyaux: nous prédisons la synthèse d'antihydrogène avec un rapport de branchement de 10 %, ainsi qu'une nouvelle classe d'atomcules métastables (alpha, p, e+, 2e-), qui pourrait être confirmée par spectroscopie. Ce travail illustre la transférabilité des concepts de chimie physique à l'étude de processus exotiques en présence d'antimatière, et apporte un éclairage nouveau sur la physico-chimie des radicaux interstellaires froids.

Durant les cultures cellulaires en bioréacteur, la physiologie des micro-organismes et les paramètres physico-chimiques (alimentations en gaz et en substrat, agitation, température, pH, pression) interagissent très fortement. La spécificité des bioréactions microbiennes, en relation avec les couplages irréductibles entre les transferts de chaleur, de matière et de quantité de mouvement, réside dans la complexité (milieu triphasique) et la dynamique (bioréaction autocatalysé) de ces systèmes. L’objectif de ce travail est de progresser dans la compréhension et le contrôle dynamique des intéractions entre les aspects biologiques et les aspects physiques à différentes échelles (macro, micro et moléculaire) pour conduire la réaction biologique vers l’objectif défini (production de biomasse, de métabolites intra ou extra cellulaires, …) et l’optimiser. Les cellules (concentration, forme, dimension, physiologie, …) affectent fortement les propriétés physico-chimiques des moûts et par conséquent, les performances des bioprocédés (vitesses spécifiques, rendements, productivité). Le comportement rhéologique particulier du moût est souvent utilisé pour comprendre l’impact de la biomasse microbienne sur le rendement et les performances du bioprocédé.Dans ce travail, des cultures axéniques, définies comme des cultures pures de microorganismes unicellulaires procaryote et eucaryote, sont considérées. Notre approche s’appuie sur des mesures physiques et physico-chimiques en ligne et hors ligne réalisées sur un bioréacteur instrumenté, mesures qui sont mises en place de façon à respecter les conditions imposées par les contraintes biologiques propres aux microorganismes et à la stratégie de culture choisie. Des cultures d’Escherichia coli et d’Yarrowia. lipolytica, à taux de croissance controlé par l’apport de substrat, ont été réalisées dans une gamme de concentration allant de 0.1 à 100 g l-1. Le bilan qui peut être dressé pour ce travail, tant sur les aspects scientifiques que technologiques, est le suivant :- conception et réalisation d’un outil d’investigation original construit sur la base d’un bioréacteur (20 l) et pourvu d’une boucle de recirculation instrumentée pour la mesure,- identification hydrodynamique (courbes de frottement) de conduites calibrées permettant la viscosimétrie en ligne durant une culture cellulaire, - conception, développement et validation d’un code, LoCoPREL, permettant simultanément le contrôle de la culture cellulaire suivant une stratégie définie, la gestion de séquences de débit dans la boucle de dérivation et l’acquisition des données issues de l’instrumentation spécifique employée,- comparaison des mesures réalisées en ligne à débit constant ou selon des séquences de débit,- mise en évidence du comportement non newtonien des moûts et d’écarts entre les mesures en ligne et hors ligne,- analyse des mesures physiques réalisées en ligne et hors ligne, en lien avec les performances de la culture / During cell cultures in bioreactors, micro-organism physiology closely interacts with physico-chemical parameters such as gas and feed flowrates, mixing, temperature, pH, pressure. The specificity of microbial bioreactions in relation with irreductible couplings between heat and mass transfers and fluid mechanics, led into complex (three-phase medium) and dynamic (auto-biocatalytics reaction) systems. Our scientific approach aims to investigate, understand and control dynamic interactions between physical and biological systems at different scales (macro, micro and molecular) for molecules, strains and/or bioprocess innovation. Cells (concentration, shape, dimension, physiology…) strongly affect physico-chemical properties of broth. Then the modification of these characteristics interacts with bioprocess performances (specific rates, yields…) with an improvement or, more frequently, a decrease of yields. Among these properties, rheological behaviour is a strategy widely used to understand the impact of cells and the derivation of bioprocess performances.In this manuscript, axenic cultures, defined as cultures of a pure and unicellular Prokaryote and Eukaryote microorganisms in bioreactors, are considered. Our approach is based on physical and physico-chemical on-line and off-line measurements in respect with accurate and stringent conditions imposed by cell culture strategy. Escherichia coli and Yarrowia lipolytica cultures were investigated with a control of growth rate by carbon feed in the range from 0.1 up to 100 g l-1. Our scientific and technical actions and results led:- to design and realize an original pilot based on a bioreactor (20 l) with a derivation loop including a specific on-line rheometric device as well as additional physical and biological measurements,- to identify, from a hydrodynamic standpoint, the generalized friction curves of calibrated ducts enabling on-line viscosimetry during cell cultures,- to conceive and validate a homemade software, named LoCoPREL, enabling simultaneously to control cell cultures under defined strategy and to manage flow sequences within the derivation loop,- to discuss and compare on-line physical measurements under constant flow rate and various sequence strategy related to investigated shear-rates,- to highlight about the non-newtonian rheological behaviour of broths and the gap between on-line and off-line measurements,- to analyse on-line and off-line physical measurements in the light of biological performances during fed-batch cultures (mass balance, specific rate, yield).

Les composés III-N, et le Nitrure de Gallium (GaN) en particulier, sont devenus des matériaux semi conducteurs importants pour l’ensemble de l’humanité. Depuis la fin des années 1990, ils ont permis le développement de composants électroluminescents fiables, diodes LED et diodes laser, qui constituent une solution de remplacement à rendement énergétique amélioré par rapport aux composants à incandescence. Il est possible qu’ils jouent aussi un rôle dans les nouvelles générations de composants pour l’électronique de puissance. Lors du développement des composants, des recherches expérimentales permettent de trouver assez rapidement des solutions pour réaliser les briques technologiques indispensables, mais le temps manque pour comprendre les mécanismes physiques mis en jeu. Nos travaux ont eu pour objectif d’approfondir la compréhension de l’influence de la structure physico-chimique sur les propriétés électriques des contacts ohmiques et Schottky sur GaN de type N. / Group III nitride semiconductor materials (III-N), and especially gallium nitride (GaN), are now key materials for the whole human kind. Since years 1990, reliable and energy-efficient light emitting devices have been developed based on III-N compounds providing higher efficiency replacement solutions to incandescent bulbs. The same III-N materials may also provide higher performance device solutions for power electronics, allowing multi-functional on-chip integration. During the industrial development of devices, experimental work is focused on finding rapidly good enough solutions for each technology brick, and on the eventual integration of the bricks into a complete device processing flow. Very often, little time and effort can be devoted to the understanding of the underlying physical and chemical processes. The aim of this work has been to study the influence of the physical and chemical material structures on the electrical properties of metal - GaN Ohmic and Schottky contacts.

Ce travail de thèse s'inscrit dans le contexte général des solutions envisageables pour répondre aux problèmes du réchauffement climatique global et de la diminution des ressources fossiles. Il a été en majeure partie consacré à l'étude et au développement d'électrocatalyseurs moléculaires pour la réduction du dioxyde de carbone. Un tel procédé pourrait permettre de transformer et valoriser le CO2 en l'exploitant comme une matière première carbonée disponible en quantité non limitée, bon marché et peu toxique. Dans une première partie, un métallocavitand, dont la structure est basée sur un calix[4]arène fonctionnalisé par quatre complexes phénanthroline tris-carbonyl de rhénium(I), a été étudié en solution et sur déposé sur surface transparente conductrice. Le but de cette étude était de contrôler par un stimulus électrochimique la fermeture et l'ouverture du bord large du cavitand. La complexité des processus rédox de ces métallo-macrocycles nous a conduits à étudier en détails les propriétés électrochimiques de complexes de rhénium(I) modèles. Ces propriétés avaient précédemment été rapportées dans la littérature mais étaient sujettes à désaccords entre les différents auteurs. Finalement l'ensemble de cette étude nous a conduits à préciser et à mieux comprendre le mécanisme de la catalyse de réduction du CO2 par ce type de complexes. Dans une deuxième partie, qui représente la partie la plus conséquente de cette thèse, la synthèse, la caractérisation physico-chimique et l'étude spectro-électrochimique de complexes bipyridine tris-carbonyle de manganèse, analogues des complexes de rhénium évoqués ci-dessus, ont été entreprises. Le but était de développer un catalyseur innovant pour la réduction électrochimique du dioxyde de carbone, du type complexe métallique, en substituant les métaux rares utilisés actuellement par un métal non-noble et abondant : le manganèse. Les propriétés électrochimiques des nouveaux complexes de Mn synthétisés ont été caractérisées en détail. La simulation des voltammétries cycliques, associée à des études mécanistiques par spectro-électrochimie UV-vis, a permis d'accéder aux données cinétiques et thermodynamiques des différentes réactions chimiques associées aux réactions de transferts d'électron irréversibles. Ces complexes de manganèse se sont révélés être des électrocatalyseurs de la réduction du CO2 au moins aussi efficaces que les complexes analogues de rhénium, décrits jusque-là comme étant les meilleurs systèmes pour cette application. Les complexes de Mn ainsi préparés montrent une excellente sélectivité (rendements faradiques élevés et peu ou pas de H2) et une bonne efficacité pour l'électro-réduction du CO2 en CO en milieu hydro-organique. Les catalyses à l'échelle préparatrice fonctionnent avec des surtensions modérées. Les mécanismes mis en jeu lors de la catalyse ont été étudiés par spectro-électrochimie UV-vis et RPE (en onde continue et pulsée) associées à des caculs théoriques DFT. Un intermédiaire-clé a ainsi pu être mis en évidence et caractérisé. Enfin, l'étude des réactions de décarbonylation photo-induites dans ces complexes est rapportée. / This PhD takes place in the general context of possible solutions to global warming and peak oil issues. It mostly deals with the study and development of molecular electrocatalysts for carbon dioxide reduction. This process may open the way to the use and valorization of CO2 as a raw material. In the first part, a metallocavitand, which structure is based on a calix[4]arene modified by four phenanthroline tris-carbonyl rhenium(I) complexes, was studied in solution and deposited on a conductive transparent surface. The aim of this study was to control through an electrochemical stimulus the closing and opening of the wide rim of the cavitand. Complexity of the redox properties of the metallocavitand led us to investigate in detail the electrochemical properties of simpler examples of these rhenium(I) complexes. These properties were previously described in the literature ; however, there was disagreement in the interpretation of the results. Finally this study led us to a more precise and better understanding of the mechanism of the reduction of CO2 by a complex of this kind. In the second part, which is the main part of this PhD, synthesis, physico-chemical characterization and spectro-electrochemical study of bipyridine tris-carbonyl manganese complexes, analogues of the rhenium complexes mentioned above, were undertaken. The aim was to develop an innovative catalyst for the electrochemical reduction of carbon dioxide, based on a metallic complex, by substituting rare and noble metals currently used by a non-noble and abundant metal: manganese. Electrochemical properties of newly synthesized manganese complexes were investigated in detail. Simulations of cyclic voltammetry, associated with mechanism studies by UV-vis spectro-electrochemistry, allowed us to determine kinetic and thermodynamic properties of the different chemical reactions coupled with the irreversible electron transfers. These manganese complexes proved to electrocatalyse the reduction of carbon dioxide at least as efficiently as the analog rhenium complexes which were, until now, the best system for this application. These manganese electrocatalysts exhibit a very good selectivity (high faradic yields and no or very little H2) and a good efficiency for reduction of CO2 to CO in aqueous-organic media. Preparative scale electrolysis operates at low overpotential. Mechanisms of the different catalytic pathways were studied using UV-vis and EPR (continuous wave or pulsed) spectro-electrochemistry associated with DFT calculations. A key-intermediate was evinced and investigated. Finally the study of photo-induced decarbonylation reactions of these complexes is also described.

L'objectif de ce travail était d'étudier les interactions entre une plante à phytoremédiatrice ?, Lantana camara (Verbenaceae), le ver de terre, Pontoscolex corethrurus (Glossoscolecidae) et les microorganismes telluriques d'un sol pollué au plomb. Dans un premier temps, il apparaît que dans les sols contaminés, la présence de ver conduit à un accroissement de la biomasse des parties aériennes et racinaires des plantes ainsi qu'à une augmentation de l'absorption de plomb. La caractérisation physico-chimique des agrégats racinaires a montré que l'activité des vers augmente le taux de matière organique, la capacité d'échange cationique ainsi que l'azote total, le potassium total et disponible. De plus, la présence des vers augmente certaines activités enzymatiques de la rhizosphère. La croissance accrue de L. camara pourrait résulter de ces différentes actions. L'action des vers de terre sur les plantes se ferait via les communautés microbiennes telluriques. Ainsi, la biomasse des microorganismes, bactéries et champignons, des agrégats racinaires augmente en présence de vers. La PCR-DGGE n'a pas permis de mettre en évidence de modifications de la structure taxonomique des communautés bactériennes sous l'influence du Pb et/ou du vers, par contre l'analyse des profils physiologiques par plaques Biolog montre clairement une diversification fonctionnelle bactérienne. Les communautés fongiques voient, elles, leur diversité taxonomique, augmenter sous l'action des vers. La restructuration des populations microbiennes, en présence de vers, des agrégats racinaires élaborés par les plantes en milieu pollué au plomb est l'élément déterminant pour la compréhension de l'impact de P. corethrurus sur la croissance et la phytoremédiation de L. camara. L'association de ces deux organismes aurait donc un potentiel considérable pour le traitement de sites industriels pollués au plomb / The objective of this work was to study the interactions between phytoremediating plant Lantana camara (Verbenaceae), the earthworm Pontoscolex corethrurus (Glossocolecidae) and microorganisms in soil contaminated with lead. Initially, it appears that in the contaminated soil, the presence of earthworm leads to an increase in the biomass of root and aerial parts of plants and increased absorption of lead. The physico-chemical characterization of root-aggregates showed that the activity of earthworms increases the rate of organic matter, cation exchange capacity, total nitrogen, total and available potassium. Moreover, the presence of earthworms increases certain enzymatic activities in the rhizosphere. The increased growth of L. camara could result from these different actions. The action of earthworm on plants would be through terrestrial microbial-communities. Thus, the biomass of microorganisms, bacteria and fungi, of root-aggregates increase in the presence of earthworms. By PCR-DGGE, we were unable to demonstrate differences in taxonomic diversity of the bacteria community but the analysis of physiological profiles with Biolog plates showed that the activities of earthworm enhance the functional diversity of soil bacteria. In other hand, the restructuring of fungal taxonomy has been clearly observed by the activity of earthworm. All changes observed can explain increased growth of plants and improved phytoextraction of heavy metal. Finally, the study underlines the role of the earthworms on the growth and the phytoextraction efficiency of the plants. So, the combination of earthworm P. corethrurus and plant L. camara could be considerable potential for the treatment of industrial sites polluted with lead

A elaboração e caracterização de sistemas tão complexos quanto alimentos não são temas que se esgotem ao longo de um único trabalho. Assim, tomando como ponto de partida o desenvolvimento de formulações para sorvetes, são apresentados os princípios gerais da criação e estabilização de um dos gêneros alimentícios mais apreciados n.o mundo todo. O primeiro capítulo aborda interações que ocorrem entre componentes de uso comum na maioria dos alimentos processados e, de modo específico, o papel desempenhado por cada um deles em formulações para sorvetes. São apresentadas características das matérias-primas especiais empregadas no desenvolvimento das formulações propostas, bem como fundamentos de reologia. Tratam-se os princípios gerais do fenômeno speckle, ferramenta bastante útil em caracterizações estruturais, porém ainda pouco explorada na área alimentícia. O segundo capítulo apresenta as formulações para sorvetes que foram elaboradas para este trabalho e os resultados de caracterizações físico-químicas tomadas sobre alguns dos ingredientes utilizados, bem como sobre os produtos finais desenvolvidos. O terceiro capítulo exibe os resultados das avaliações reológicas feitas em ingredientes e misturas formuladas para este estudo. A partir do perfil demonstrado pelos reogramas, interações microscópicas puderam ser cogitadas. Mostram-se também, imagens tomadas por um sistema de videomicroscopia acoplado ao reômetro (módulo Rheoscope), onde puderam ser observadas deformações estruturais em tempo real ocorridas com as amostras durante as avaliações. O quarto capítulo propõe uma nova metodologia de investigação estrutural na qual a análíse dos resultados gerados a partir de um fenômeno de interferência possibilita mapear a evolução da microestrutura de sorvetes ao longo do tempo, quando submetidos a diferentes condições de temperatura. / Elaboration and characterization of systems with high leveI of complexity as foods cannot discussed in an only study. In this work, from development of special ice cream formulations are presenteei the general principIes of creation and stabílízation of one of the most appreciated foodstuffs. In first chapter the interactions that occur among components of current/y use in processed foods and, in a specific manner, the role of each one in ice cream formulations. Characteristics of the special raw materiais employed in development of the proposed formulatíons are presenteei, as well fundamental concepts of rheological behavior. Also, general principies of speckle phenomenon are presented, a very useful tool to structural investigations in several systems, but few explored in food science and technology. In second chapter are presented the ice cream formulations that were elaborated by this research and the results of analysis of both composition and chemical properties taken on some ingredients as well in developed products. In third chapter are exhibited the results from rheological assessments performed in ingredients and formulated ice cream mixes. From rheological curves, microscopic interactions could be cogitated. Images taken by a system of microscopy connected to rheometer shown structural deformatíons in real time occurred with the samples during the evaluations. In fourth chapter is showed a new methodology of structural investigation in which the analysis of results obtained from interference phenomenon allow to generate a map of temporal evolution of ice creams along the time, at different temperature conditions.

A caracterização dos méis monoflorais tomou-se uma tendência mundial. Sendo assim, este trabalho apresenta o desenvolvimento e otimização de metodologias para as análises de carboidratos por Cromatografia Líquida de Alta Eficiência (CLAE), para o tipo de montagem da lâmina para a realização do espectro polínico e para a determinação do conteúdo de umidade, com o intuito de caracterizar as amostras de méis monoflorais de eucalipto e laranja de algumas regiões do Estado de São Paulo. Na análise polínica foi empregado o método modificado de Iwama e Melhem (1979) para limpeza dos grãos de pólen, e para a montagem da lâmina foi realizado um estudo de comparação entre o método de Iwama e Melhem (1979) e o método proposto (Louveaux modificado, 1978), através de um teste de duas proporções. No conteúdo de umidade foi realizada a comparação de dois métodos oficiais (AOAC e EHC) através de um planejamento fatorial e um estudo da variabilidade empregando-se um planejamento hierárquico. Para a análise do conteúdo de carboidratos realizou-se a otimização das condições de análise por CLAE, empregando-se um planejamento de misturas e uma análise de regressão linear para curvas de calibração, um teste-t para estudo da recuperação e uma análise de variância (ANOVA) para comparar os conteúdos de carboidratos das duas floradas. Na análise polínica pode se observar que o método proposto (Louveaux modificado) era o mais adequado visto que este apresentava uma maior distribuição das famílias de menor freqüência. Com os espectro polínicos (pólen dominante) das amostras de méis coletadas pode-se classificar os méis como monoflorais de eucalipto e laranja. Através da análise do espectro polínico completo pode-se observar que os méis monoflorais de laranja possuem uma diversificação maior de famílias em relação aos méis monoflorais de eucalipto, sugerindo que estes méis possuem uma maior variação de néctares e grãos de pólen na sua formação, sendo que este fato pode estar relacionado às regiões de cultivo. O planejamento fatorial 22 no conteúdo de umidade sugeriu que as amostras cristalizadas interferem na medida do índice de refração. O emprego do pré-tratamento da amostra (EHC) permitiu uma diminuição nos conteúdos de umidade das amostras cristalizadas. Quando este pré-tratamento foi usado para amostras líquidas não se observaram diferenças significativas no teor de umidade. Pode-se então sugerir que o método refratométrico da Comunidade Européia de Mel (EHC) seria os mais adequados para ser usada nas amostras líquidas e cristalizada. O estudo da variabilidade dos conteúdos de umidade realizado através de um planejamento hierárquico e análise de variância (ANOVA) indicaram que existem diferenças significativas entre as fontes florais e entre as amostras de méis. Foram escolhidas como melhores condições experimentais para a determinação dos carboidratos no mel por CLAE, o uso de coluna de aminopropil de tamanho menor (15,0cm x 4,5cm), e uma temperatura de 32°C na coluna e de 35,5°C para o detector de índice de refração e uma vazão de fluxo de 1,2 mL/min. Para a fase móvel o planejamento em misturas realizado, indicou como melhor fase móvel a mistura 50:10:40(acetonitrila; água; acetato de etila). Ao realizar as curvas de calibração dos carboidratos (glicose, frutose, sacarose, turanose e maltose) pode-se observar que estas eram lineares, com R2ajust altos e precisão aceitáveis para a quantificação dos carboidratos. Foi determinada a capacidade de detecção (0,2 - 0,4%) e capacidade de quantificação (0,7 - 1,3%) para a sacarose, turanose e maltose. O estudo de recuperação média dos carboidratos sugeriu que curvas de calibração poderiam ser utilizadas com confiança para determinar os conteúdos de carboidratos. A avaliação entre as concentrações médias dos carboidratos individuais pela ANOVA e pelo teste-t ao nível de 95% de confiança dos méis monoflorais de eucalipto e laranja, sugeriu que existem diferenças significativas nas concentrações de glicose, sacarose e turanose nas amostras de méis. Desta forma pode-se classificar os méis monoflorais de eucalipto e laranja através do espectro polínico. Conclui-se que as determinações do conteúdo de umidade e carboidratos (glicose, sacarose e turanose) podem se empregados para caracterizar a origem botânica dos méis monoflorais de eucalipto e laranja. / Considering the characterization of monofloral honeys as a worldwide tendency, this study presents the development and optimization of methodologies for carbohydrate analysis by HPLC, the kind of standardization for lamina preparations for pollen analysis and the determination of moisture content in order to characterize eucalyptus and orange monofloral honey samples from some regions in São Paulo State. The modified method of Iwama and Melhem (1979) was employed for pollen analysis pollen cleaning. For lamina preparation it a comparison study was made between the Iwana and Melhem (1979) method and the proposed method (Louveaux modified) through two proportion tests. A comparison for moisture content was made between two official methods (AOAC and EHC) through a factorial desing and a study of variability through hierarchical desings. For the carbohydrate content analysis an optimization of analysis conditions for HPLC was made using mixture desing and a linear regression analysis for calibration curves, a t-test for a recovery study and a variance analysis (ANOVA) to compare the carbohydrate contents of both floral origins. In pollen analysis one can observe that the proposed Louveaux modified method was the most adequate since it showed a bigger distribution of less frequently occcoring families. With the pollen spectrum (dominant pollen) from honey samples, the monoflorals of eucalyptus and orange, can be classified. And by complete pollen spectrum analysis one can observe that orange monofloral honeys contain more diversified families relative to eucalyptus monofloral honeys, suggesting these honeys have a bigger variation of nectars and pollen grains in their formation. This fact can be related to regions of plantation. The factorial desing 22 in moisture content suggests that the crystallized samples interfere in refractive index measurements. The (EHC) sample pre-treatment led to lower moisture contents of crystallized samples. When this pre-treatment was used for liquid samples no significant differences were observed concerning moisture content. Therefore it can be suggested that the EHC refractrometric method is more appropriate to use for liquid and crystallized samples. The study of moisture content variability through hierarchical desing and variance analysis indicates significant differences among floral sources and moisture content of honey samples. The use of a aminopropil column of smaller size (15,0 cm x 4,5 cm) and a temperature of 32 ° C in the column and 35,5 ° C for the refractive index detector and a flow rate of 1.2 ml/min were the best experimental conditions chosen to determine the carbohydrates in honey by HPLC. For the mobile phase the mixture desing indicated that the best combination was 50: 10: 40( acetonitrile, water, ethyl acetate). The calibration curves of the carbohydrates (glucose, fructose, sucrose, turanose, maltose) were linear, with high R2 and had acceptable accuracy for carbohydrate quantification. 80th the detection capacity and quantification capacities were determined the former being (0.2 - 0.4%) and the latter (0.7 - 1.3 %) for sucrose, turanose and maltose. The mean recovery study of carbohydrates suggested that the calibration curves are reliable to determine carbohydrate contents. The evaluation among the mean concentrations of individual carbohydrates by ANOVA and t-test at the 95% confidence level of eucalyptus and orange monofloral honeys suggested that there are significant differences in glucose, sucrose and turanose concentration in these honey samples. In this way eucalyptus and orange monofloral honeys can be classified by the pollen spectrum. Therefore, it was concluded that the eucalyptus and orange monofloral honeys can be classified by moisture content determination and/or carbohydrate (glucose, sucrose and turanose) determination.

O presente trabalho visou o desenvolvimento de uma sobremesa aerada simbiótica tipo musse, com baixo teor de gordura, processada com a adição da cultura probiótica de Lactobacillus acidophilus La-5, dos ingredientes prebióticos oligofrutose e inulina e de concentrado protéico de soro de leite (WPC), para ser armazenada sob refrigeração e congelamento, e a comparação do efeito desses ingredientes sobre as características do produto e a resistência in vitro do probiótico adicionado. Utilizando o delineamento experimental para misturas de três fatores e um ponto central, 7 formulações de musses de goiaba foram estudadas durante o armazenamento a 4°C, durante 28 dias, e a -18°C, durante 112 dias. As maiores populações de L. acidophilus foram alcançadas nas musses congeladas, com valores sempre superiores a 7 log UFC/g por até 12 semanas de armazenamento a -18°C. A viabilidade de L. acidophilus se mostrou satisfatória até o 28º dia nas musses refrigeradas adicionadas de WPC, com populações variando entre 7,7 e 6,2 log UFC/g. Para as demais musses, a população do probiótico chegou a reduzir, em média, até 2 log após 28 dias. L. acidophilus apresentou grande redução da viabilidade, tanto para as musses refrigeradas como para as congeladas, nos ensaios de sobrevivência às condições gastrintestinais simuladas in vitro. Nas musses refrigeradas, a substituição total ou parcial da gordura láctea por inulina resultou em melhor sobrevivência do probiótico durante o ensaio in vitro na primeira semana. Ao considerar o período completo de armazenamento, a menor redução da viabilidade de L. acidophilus ao longo dos ensaios in vitro foi observada para as musses congeladas. A substituição da gordura láctea por inulina e WPC e o congelamento resultaram em diferenças significativas nos parâmetros de textura das musses (p<0,05), não interferindo, porém, na sua aceitabilidade sensorial. Considerando as populações máximas do probiótico ao longo do armazenamento e a sua sobrevivência às condições gastrintestinais simuladas in vitro, observou-se os melhores resultados com a substituição parcial da gordura láctea adicionada no produto refrigerado por WPC, na proporção de 2 a 3% da formulação. A adição simultânea de WPC e inulina para musses armazenadas sob refrigeração e congelamento é recomendada desde que a proporção conjunta desses ingredientes não ultrapasse 2,6%, no sentido de não prejudicar a textura e as características sensoriais do produto. De modo especial para as musses congeladas, também é aconselhada a proporção de 2% de gordura láctea e 2% de inulina, para a qual foram obtidos os melhores resultados nos ensaios de sobrevivência in vitro do probiótico. / The aim of the present study was to develop a mousse-type synbiotic aerated dessert with low fat content, supplemented with the Lactobacillus acidophilus La-5 probiotic culture, the prebiotic ingredients oligofructose and inulin and whey protein concentrate (WPC), to be stored refrigerated and frozen, and to compare the effect of these ingredients on the product characteristics and the in vitro resistance of the added probiotic microorganism. Using a simplex centroid design, seven guava mousse-making trials were studied during storage at 4°C for 28 days and at -18°C for 112 days. The highest populations of L. acidophilus were achieved in frozen products, always above 7 log CFU/g at up to 12 weeks of storage at -18°C. L. acidophilus viability was satisfactory up to 28 days in the refrigerated mousses supplemented with WPC, with populations between 6.2 and 7.7 log CFU/g. For the other mousses, the populations decreased around 2 log cycles afier 28 days of refrigerated storage. Reductions in L. acidophilus survival during the in vitro assays were high both for refrigerated and frozen mousses. For the refrigerated mousses, the total or partial substitution of milk fat by inulin increased the probiotic survival during the in vitro assays in the first week. In terms of the whole storage, L. acidophilus survival decreased less during the in vitro assays for the frozen mousses. The substitution of milk fat by inulin and WPC and the frozen storage lead to significant differences in the texture of mousses (p<0.05), without affecting their sensory acceptability. Considering the maximum probiotic populations during storage and the survival under the in vitro simulated gastrointestinal conditions, the best results for the refrigerated product were obtained with the partial substitution of milk fat by WPC at 2 to 3%. The simultaneous addition of inulin and WPC is recommended. However, the total proportion of both ingredients together should not exceed 2.6%, so as to obtain a texture profile and a sensory acceptance similar to the traditional product. Particularly for frozen mousses, the mixture of 2% milk fat and 2% inulin in the formulation is also suggested, for which the best results on probiotic survival in the in vitro assays were observed.