Multimedia exploration is addressing the issue of searching within multimedia collections where the data is not annotated, the user is not able to formulate the text query, does not have any example data or wants to get quickly acquainted with the features of the collection. Part of the exploration is also the presentation of the results which is the main contribution of this thesis. The relations between the pictures in the exploration results are transformed into a graph which is visualised through a particle physics model. To visualize a large number of pictures, it is necessary to optimize the calculation. This thesis describes the optimization of both the basic algorithms and their adaptations for the need of multimedia exploration. The calculation layout is available in 2D and 3D space. Powered by TCPDF (www.tcpdf.org)

<div>Electronics have now become a part of our daily life and therefore the reliability of microelectronics cannot be overlooked. As the Moore's law era comes to an end, various new system-level innovations (e.g., 3D packaging, evolution of packaging material to molding compounds) with constant scaling of transistors have resulted in increasingly complicated integrated circuits (ICs) configurations. The reliability modeling of complex ICs is a nontrivial concern for a variety of reasons. For example, ever since 2004, self-heating effect (SHE) has become an important reliability concern for ICs. Currently, many groups have developed thermal predictive models for transistors, circuits, and systems. In order to describe SHE self-consistently, the modeling framework must account for correlated self-heating within the ICs. This multi-scales nature of the self-consistency problem is one of the difficult factors poses an important challenge to self-consistent modeling. In addition, coupling between different physical effects within IC further complicates the problem.</div><div><br></div><div>In this thesis, we discuss three challenges, and their solutions related to an IC's reliability issues. We (i) generalize the classical effective medium theory (EMT) to account for anisotropic, heterogeneous system; (ii) develop computationally efficient a physics-based thermal compact model for a packaged ICs to predict junction temperature in the transistor based on the EMT model, and image charge theory. Our thermal compact model bridges different length scales among the sources and rest of the system. Finally (iii) propose the modeling framework of electrical chip package interaction (CPI) due to charge transport within mold compounds by coupling moisture diffusion, electric distribution, and ions transport. The proposed modeling framework not only addresses the three major modeling challenges discussed earlier, but also provides deep and fundamental insights regarding the performance and reliability of modern ICs. </div>

Pore type variations account for complex velocity-porosity relationship and intensive permeability heterogeneity and consequently low oil and gas recovery in carbonate reservoir. However, it is a challenge for geologist and geophysicist to quantitatively estimate the influences of pore type complexity on velocity variation at a given porosity and porosity-permeability relationship. A new rock physics-based integrated approach in this study was proposed to quantitatively characterize the diversity of pore types and its influences on wave propagation in carbonate reservoir. Based on above knowledge, permeability prediction accuracy from petrophysical data can be improved compared to conventional approach. Two carbonate reservoirs with different reservoir features, one is a shallow carbonate reservoir with average high porosity (>10%) and another one is a supper-deep carbonate reservoir with average low porosity (<5%), are used to test the proposed approach. Paleokarst is a major event to complicate carbonate reservoir pore structure. Because of limited data and lack of appropriate study methods, it is a difficulty to characterize subsurface paleokarst 3D distribution and estimate its influences on reservoir heterogeneity. A method by integrated seismic characterization is applied to delineate a complex subsurface paleokarst system in the Upper San Andres Formation, Permian basin, West Texas. Meanwhile, the complex paleokarst system is explained by using a carbonate platform hydrological model, similar to modern marine hydrological environments within carbonate islands. How to evaluate carbonate reservoir permeability heterogeneity from 3D seismic data has been a dream for reservoir geoscientists, which is a key factor to optimize reservoir development strategy and enhance reservoir recovery. A two-step seismic inversions approach by integrating angle-stack seismic data and rock physics model is proposed to characterize pore-types complexity and further to identify the relative high permeability gas-bearing zones in low porosity reservoir (< 5%) using ChangXing super-deep carbonate reservoir as an example. Compared to the conventional permeability calculation method by best-fit function between porosity and permeability, the results in this study demonstrate that gas zones and non-gas zones in low porosity reservoir can be differentiated by using above integrated permeability characterization method.

No description available.

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第19695号 / 工博第4150号 / 新制||工||1640(附属図書館) / 32731 / 京都大学大学院工学研究科都市社会工学専攻 / (主査)教授 小池 克明, 教授 高岡 昌輝, 准教授 村田 澄彦 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

To measure physical activity in a wheelchair user is important. Disabled people have been found to be less active and it has negative health implications. By relating to ones own physical activity in concrete form it is easier to reinforce a positive attitude towards being physically active. The aim of this thesis is to show how a system can be built, that is able to collect measurements from sensors, with usability in mind. The system consists of software that integrates an iPhone, Apple Watch and a Tacx rotation sensor mounted on a wheelchair. With the help of a physics model these measurements can estimate energy expenditure of a wheelchair user. The system was tested with four participants performing subjectively decided low, moderate and vigorous physical activity while the system collected data. In terms of absolute energy expenditure the system was inaccurate. On the other hand, correlations were found between the calculated energy expenditures and physical activity. Using measurements from the rotations sensor a correlation of 0.7315 was found between the calculated energy expenditure and physical activity, a correlation of 0.5385 using measurements from the GPS and a correlation of 0.6452 using measurements from Apples own proprietary algorithm. The created system is a promising prototype towards objective measurement of physical activity in wheelchair users.

This PhD study, developed at Universitat Politècnica de València (UPV), aims to cover the first phase of the benchmark released by the expert group on Uncertainty Analysis in Modeling (UAM-LWR). The main contribution to the benchmark, made by the thesis' author, is the development of a MATLAB program requested by the benchmark organizers. This is used to generate neutronic libraries to distribute among the benchmark participants. The UAM benchmark pretends to determine the uncertainty introduced by coupled multi-physics and multi-scale LWR analysis codes. The benchmark is subdivided into three phases: 1. Neutronic phase: obtain collapsed and homogenized problem-dependent cross sections and criticality analyses. 2. Core phase: standalone thermohydraulic and neutronic codes. 3. System phase: coupled thermohydraulic and neutronic code. In this thesis the objectives of the first phase are covered. Specifically, a methodology is developed to propagate the uncertainty of cross sections and other neutronic parameters through a lattice physics code and core simulator. An Uncertainty and Sensitivity (U&S) analysis is performed over the cross sections contained in the ENDF/B-VII nuclear library. Their uncertainty is propagated through the lattice physics code SCALE6.2.1, including the collapse and homogenization phase, up to the generation of problem-dependent neutronic libraries. Afterward, the uncertainty contained in these libraries can be further propagated through a core simulator, in this study PARCSv3.2. The module SAMPLER -available in the latest release of SCALE- and DAKOTA 6.3 statistical tool are used for the U&S analysis. As a part of this process, a methodology to obtain neutronic libraries in NEMTAB format -to be used in a core simulator- is also developed. A code-to-code comparison with CASMO-4 is used as a verification. The whole methodology is tested using a Boiling Water Reactor (BWR) reactor type. Nevertheless, there is not any concern or limitation regarding its use in any other type of nuclear reactor. The Gesellschaft für Anlagen und Reaktorsicherheit (GRS) stochastic methodology for uncertainty quantification is used. This methodology makes use of the high-fidelity model and nonparametric sampling to propagate the uncertainty. As a result, the number of samples (determined using the revised Wilks' formula) does not depend on the number of input parameters but only on the desired confidence and uncertainty of output parameters. Moreover, the output Probability Distribution Functions (PDFs) are not subject to normality. The main disadvantage is that each input parameter must have a pre-defined PDF. If possible, input PDFs are defined using information found in the related literature. Otherwise, the uncertainty definition is based on expert judgment. A second scenario is used to propagate the uncertainty of different thermohydraulic parameters through the coupled code TRACE5.0p3/PARCSv3.0. In this case, a PWR reactor type is used and a transient control rod drop occurrence is simulated. As a new feature, the core is modeled chan-by-chan following a fully 3D discretization. No other study is found using a detailed 3D core. This U&S analysis also makes use of the GRS methodology and DAKOTA 6.3. / Este trabajo de doctorado, desarrollado en la Universitat Politècnica de València (UPV), tiene como objetivo cubrir la primera fase del benchmark presentado por el grupo de expertos Uncertainty Analysis in Modeling (UAM-LWR). La principal contribución al benchmark, por parte del autor de esta tesis, es el desarrollo de un programa de MATLAB solicitado por los organizadores del benchmark, el cual se usa para generar librerías neutrónicas a distribuir entre los participantes del benchmark. El benchmark del UAM pretende determinar la incertidumbre introducida por los códigos multifísicos y multiescala acoplados de análisis de reactores de agua ligera. El citado benchmark se divide en tres fases: 1. Fase neutrónica: obtener los parámetros neutrónicos y secciones eficaces del problema específico colapsados y homogenizados, además del análisis de criticidad. 2. Fase de núcleo: análisis termo-hidráulico y neutrónico por separado. 3. Fase de sistema: análisis termo-hidráulico y neutrónico acoplados. En esta tesis se completan los principales objetivos de la primera fase. Concretamente, se desarrolla una metodología para propagar la incertidumbre de secciones eficaces y otros parámetros neutrónicos a través de un código lattice y un simulador de núcleo. Se lleva a cabo un análisis de incertidumbre y sensibilidad para las secciones eficaces contenidas en la librería neutrónica ENDF/B-VII. Su incertidumbre se propaga a través del código lattice SCALE6.2.1, incluyendo las fases de colapsación y homogenización, hasta llegar a la generación de una librería neutrónica específica del problema. Luego, la incertidumbre contenida en dicha librería puede continuar propagándose a través de un simulador de núcleo, para este estudio PARCSv3.2. Para el análisis de incertidumbre y sensibilidad se ha usado el módulo SAMPLER -disponible en la última versión de SCALE- y la herramienta estadística DAKOTA 6.3. Como parte de este proceso, también se ha desarrollado una metodología para obtener librerías neutrónicas en formato NEMTAB para ser usadas en simuladores de núcleo. Se ha realizado una comparación con el código CASMO-4 para obtener una verificación de la metodología completa. Esta se ha probado usando un reactor de agua en ebullición del tipo BWR. Sin embargo, no hay ninguna preocupación o limitación respecto a su uso con otro tipo de reactor nuclear. Para la cuantificación de la incertidumbre se usa la metodología estocástica Gesellschaft für Anlagen und Reaktorsicherheit (GRS). Esta metodología hace uso del modelo de alta fidelidad y un muestreo no paramétrico para propagar la incertidumbre. Como resultado, el número de muestras (determinado con la fórmula revisada de Wilks) no depende del número de parámetros de entrada, sólo depende del nivel de confianza e incertidumbre deseados de los parámetros de salida. Además, las funciones de distribución de probabilidad no están limitadas a normalidad. El principal inconveniente es que se ha de disponer de las distribuciones de probabilidad de cada parámetro de entrada. Si es posible, las distribuciones de probabilidad de entrada se definen usando información encontrada en la literatura relacionada. En caso contrario, la incertidumbre se define en base a la opinión de un experto. Se usa un segundo escenario para propagar la incertidumbre de diferentes parámetros termo-hidráulicos a través del código acoplado TRACE5.0p3/PARCSv3.0. En este caso, se utiliza un reactor tipo PWR para simular un transitorio de una caída de barra. Como nueva característica, el núcleo se modela elemento a elemento siguiendo una discretización totalmente en 3D. No se ha encontrado ningún otro estudio que use un núcleo tan detallado en 3D. También se usa la metodología GRS y el DAKOTA 6.3 para este análisis de incertidumbre y sensibilidad. / Aquest treball de doctorat, desenvolupat a la Universitat Politècnica de València (UPV), té com a objectiu cobrir la primera fase del benchmark presentat pel grup d'experts Uncertainty Analysis in Modeling (UAM-LWR). La principal contribució al benchmark, per part de l'autor d'aquesta tesi, es el desenvolupament d'un programa de MATLAB sol¿licitat pels organitzadors del benchmark, el qual s'utilitza per a generar llibreries neutròniques a distribuir entre els participants del benchmark. El benchmark del UAM pretén determinar la incertesa introduïda pels codis multifísics i multiescala acoblats d'anàlisi de reactors d'aigua lleugera. El citat benchmark es divideix en tres fases: 1. Fase neutrònica: obtenir els paràmetres neutrònics i seccions eficaces del problema específic, col¿lapsats i homogeneïtzats, a més de la anàlisi de criticitat. 2. Fase de nucli: anàlisi termo-hidràulica i neutrònica per separat. 3. Fase de sistema: anàlisi termo-hidràulica i neutrònica acoblats. En aquesta tesi es completen els principals objectius de la primera fase. Concretament, es desenvolupa una metodologia per propagar la incertesa de les seccions eficaces i altres paràmetres neutrònics a través d'un codi lattice i un simulador de nucli. Es porta a terme una anàlisi d'incertesa i sensibilitat per a les seccions eficaces contingudes en la llibreria neutrònica ENDF/B-VII. La seua incertesa es propaga a través del codi lattice SCALE6.2.1, incloent les fases per col¿lapsar i homogeneïtzar, fins aplegar a la generació d'una llibreria neutrònica específica del problema. Després, la incertesa continguda en la esmentada llibreria pot continuar propagant-se a través d'un simulador de nucli, per a aquest estudi PARCSv3.2. Per a l'anàlisi d'incertesa i sensibilitat s'ha utilitzat el mòdul SAMPLER -disponible a l'última versió de SCALE- i la ferramenta estadística DAKOTA 6.3. Com a part d'aquest procés, també es desenvolupa una metodologia per a obtenir llibreries neutròniques en format NEMTAB per ser utilitzades en simuladors de nucli. S'ha realitzat una comparació amb el codi CASMO-4 per obtenir una verificació de la metodologia completa. Aquesta s'ha provat utilitzant un reactor d'aigua en ebullició del tipus BWR. Tanmateix, no hi ha cap preocupació o limitació respecte del seu ús amb un altre tipus de reactor nuclear. Per a la quantificació de la incertesa s'utilitza la metodologia estocàstica Gesellschaft für Anlagen und Reaktorsicherheit (GRS). Aquesta metodologia fa ús del model d'alta fidelitat i un mostreig no paramètric per propagar la incertesa. Com a resultat, el nombre de mostres (determinat amb la fórmula revisada de Wilks) no depèn del nombre de paràmetres d'entrada, sols depèn del nivell de confiança i incertesa desitjats dels paràmetres d'eixida. A més, las funcions de distribució de probabilitat no estan limitades a la normalitat. El principal inconvenient és que s'ha de disposar de les distribucions de probabilitat de cada paràmetre d'entrada. Si és possible, les distribucions de probabilitat d'entrada es defineixen utilitzant informació trobada a la literatura relacionada. En cas contrari, la incertesa es defineix en base a l'opinió d'un expert. S'utilitza un segon escenari per propagar la incertesa de diferents paràmetres termo-hidràulics a través del codi acoblat TRACE5.0p3/PARCSv3.0. En aquest cas, s'utilitza un reactor tipus PWR per simular un transitori d'una caiguda de barra. Com a nova característica, cal assenyalar que el nucli es modela element a element seguint una discretizació totalment 3D. No s'ha trobat cap altre estudi que utilitze un nucli tan detallat en 3D. També s'utilitza la metodologia GRS i el DAKOTA 6.3 per a aquesta anàlisi d'incertesa i sensibilitat.¿ / Mesado Melia, C. (2017). Uncertainty Quantification and Sensitivity Analysis for Cross Sections and Thermohydraulic Parameters in Lattice and Core Physics Codes. Methodology for Cross Section Library Generation and Application to PWR and BWR [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/86167

Dans le contexte des moteurs électriques automobiles, les phénomènes vibratoires d'origine magnétique soulèvent une problématique relativement récente. L'objectif de cette thèse est la mise au point d'un modèle multi-physique pertinent d'une machine électrique afin de réaliser quelques études spécifiques, d'optimiser la machine et de prendre en compte la variabilité du comportement vibratoire. La modélisation numérique s'appuie totalement sur des formulations analytiques afin de bien maîtriser les différentes physiques. Des mesures expérimentales sur la machine permettent une confrontation avec le modèle numérique multi-physique et une validation des choix de modélisation. Dans ce contexte de modélisation multi-physique, un outil de couplage est développé entre les modèles 2D électromagnétique et 3D mécanique afin d'évaluer les comportements vibratoires d'origine électromagnétique de la machine. Une attention particulière a été portée à la prise en compte des forces magnétiques radiales et surtout tangentielles sur le stator de la machine électrique. Une méthode d'optimisation, basée sur le principe d'une surface de réponse dynamique, est appliquée sur le modèle électromagnétique afin d'améliorer des paramètres de conception de la machine. Les incertitudes liées à la conception sont souvent nombreuses, notamment dans le domaine vibratoire. A cet effet, la méthode MSP (Modal Stability Procedure) prenant en compte la variabilité des paramètres matériaux est proposée. La formulation MSP pour l'élément 3D hexaédrique est développée et appliquée au stator électrique afin d'évaluer la variabilité des fréquences propres et des fonctions de réponse en fréquence. / In the context of automotive electric motors, vibratory phenomena of magnetic origin arise relatively recent problems. the aim of this thesis is to develop a relevant multi-physic model of the electrical machine to perform some specific studies, to optimize the design of the machine and to take into account the variability of the vibration behavior. Numerical model is too based on analytical formulations in order to monitor the different physics. Experimental measurements on the machine are used to validate the numerical multi-physics model. In this context of multi-physic modeling, a coupling tool is developed between the 2D electromagnetic and 3D mechanical models, in order to evaluate the vibratory behavior of electomagnetic origin of the machine. A special attention was given in modeling of radial and especially tangential magnetic forces on the electric stator. An optimization method based on a dynamic response surface is applied to the electromagnetic model in order to improve the design of the machine. Uncertainties associated to the design are numerous, especially in the vibratory field. In this context, we proposed the MSP method (Modal Stability Procedure), which taking into account the variability of the material parameters. The MSP formulation for 3D hexahedral finite element is developed an applied to the electric staor, in order to evaluate the variability of the natural frequencies and the frequency response functions.

Although carbonates hold more than 60 percent of the world's oil reserves, they, nevertheless, exhibit much lower average recovery factor values than terrigenous sandstone reservoirs. Thus, utilization of advanced enhanced oil recovery (EOR) techniques such as high pressure CO2 injection may normally be required to recover oil in place in carbonate reservoirs. This study addresses how different rock types can influence the seismic monitoring of CO2 sequestration in carbonates. This research utilizes an elastic parameter, defined in a rock physics model of poroelasticity and so-­called as the frame flexibility factor, to successfully quantify the carbonate pore types in core samples available from the Great Bahama Bank (GBB). This study shows that for carbonate samples of a given porosity the lower the frame flexibility factors the higher is the sonic wave velocity. Generally, samples with frame flexibility values of <4 are either rocks with visible moldic pores or intraframe porosity; whereas, samples with frame flexibility values of >4 are rocks with intercrystalline and microporosity. Hence, different carbonate pore geometries can be quantitatively predicted using the elastic parameters capable of characterizing the porous media with a representation of their internal structure on the basis of the flexibility of the frame and pore connectivity. In this research, different fluid substitution scenarios of liquid and gaseous CO2 saturations are demonstrated to characterize the variations in velocity for carbonate-specific pore types. The results suggest that the elastic response of CO2 flooded rocks is mostly governed by pore pressure conditions and carbonate rock types. Ultrasonic P-­wave velocities in the liquid-­phase CO2 flooded samples show a marked decrease in the order of 0.6 to 16 percent. On the contrary, samples flooded with gaseous-­phase CO2 constitute an increase in P-­wave velocities for moldic and intraframe porosities, while establishing a significant decrease for samples with intercrystalline and micro-­porosities. Such velocity variations are explained by the stronger effect of density versus compressibility, accounting for the profound effect of pore geometries on the acoustic properties in carbonates. The theoretical results from this research could be a useful guide for interpreting the response of time-­lapse seismic monitoring of carbonate formations following CO2 injection at depth. In particular, an effective rock-­physics model can aid in better discrimination of the profound effects of different pore geometries on seismic monitoring of CO2 sequestration in carbonates.

Context: Fluid-particle systems are seldom used in games, the apparent performance costs of simulating a fluid-particle system discourages the developer to implement a system of such. The processing power delivered by a modern GPU enables the developer to implement complex particle systems such as fluid-particle systems. Writing efficient fluid-particle systems is the key when striving for real-time fluid-particle simulations with good scalability. Objectives: This thesis ultimately tries to provide the reader with a well-performing and scalable fluid-particle system simulated in real-time using a great number of particles. The fluid-particle system implements two different fluid physics models for diversity and comparison purposes. The fluid-particle system will then be measured for each fluid physics model and provide results to educate the reader on how well the performance of a fluid-particle system might scale with the increase of active particles in the simulation. Finally, a performance comparison of the particle scalability is made by completely excluding the fluid physics calculations and simulate the particles using only gravity as an affecting force to be able to demonstrate how taxing the fluid physics calculations are on the GPU. Methods: The fluid-particle system has been run using different simulation scenarios, where each scenario is defined by the amount of particles being active and the dimensions of our fluid-particle simulation space. The performance results from each scenario has then been saved and put into a collection of results for a given simulation space. Results: The results presented demonstrate how well the fluid-particle system actually scales being run on a modern GPU. The system reached over a million particles while still running at an acceptable frame rate, for both of the fluid physics models. The results also shows that the performance is greatly reduced by simulating the particle system as a fluid-particle one, instead of only running it with gravity applied. Conclusions: With the results presented, we are able to conclude that fluid-particle systems scale well with the number of particles being active, while being run on a modern GPU. There are many optimizations to be done to be able to achieve a well-performing fluid-particle system, when developing fluid-particle system you should be wary of the many performance pitfalls that comes with it. / Vätskebaserade partikelsystem används sällan inom realtidsspel. Dessa system är väldigt prestandakrävande, till den grad att de avskräcker utvecklare från att implementera dem i sina realtidsspel. GPGPU ger utvecklare möjligheten att implementera komplexa partikelsystem, såsom vätskepartikelsystem, och simulera dessa system i realtid. Den här uppsatsen utforskar två olika fysikmodeller som kan användas för vätskesimulering, och sedan utförs det prestandamätningar under varierande omständigheter. Baserat på dessa prestandamätningar så kan slutsatser dras om hur skalbart ett vätskepartikelsystem är, alltså hur prestandan sjunker i förhållande till antalet partiklar i systemet. Slutsatser som dras efter att samtliga mätningar har utförts är att dessa system har en god skalbarhet, men att det finns många prestandafallgropar man måste se upp för när man utvecklar ett vätskepartikelsystem.