L'objectif de cette thèse est de trouver la forme optimale d'une antenne planaire ou d'un réseau d'antennes planaires à partir de contraintes imposées (diagramme de rayonnement, gain ou directivité) ou de reconstruire la forme à partir de mesures expérimentales. L'algorithme d'optimisation développé est basé sur une méthode de type gradient et la reconstruction des contours par une méthode d'ensembles de niveaux (Level Sets) ou "contours actifs". Le problème direct est résolu en utilisant une formulation intégrale du problème électromagnétique et une méthode d'éléments finis pour la discrétisation. Le gradient de forme est calculé en utilisant deux méthodes différentes. Tout d'abord, une méthode par différences finies basée sur la dérivée à un nœud du maillage, pour une modification infinitésimale des éléments triangulaires du contour, suivant la direction de la normale extérieure. La deuxième méthode est basée sur le gradient topologique pour le calcul de la déformation des contours. Une méthode d'ensembles de niveaux avec bande étroite a été développée pour faire évoluer le contour des antennes utilisant la vitesse de déformation calculée à partir du gradient de forme. Différentes configurations d'antennes et réseaux d'antennes planaires ont été utilisées pour étudier les performances de l'algorithme d'optimisation. Des techniques de type saut de fréquence et multifréquence ont été utilisées pour optimiser la forme dans une bande de fréquence. L'optimisation de forme pour la miniaturisation d'antennes planaires concerne de nombreuses applications, en particulier, pour les réseaux réflecteurs / The objective of this thesis work is to find the optimal shape of planar antenna elements and arrays from imposed constraints (e.g. desired or imposed radiation patterns, gain or directivity) or to reconstruct the shape from experimental measurements. The optimization algorithm is based on the gradient-type method and an active contour reconstruction by means of the Level Set method. The forward problem is solved using an integral formulation of the EM problem with finite element discretization. The shape gradient is computed using two different methods: one is finite differential method based on nodal point mesh derivation with an infinitesimal modification of the triangular elements on the contour along the outward normal direction, another the topological shape gradient, which is computed based on a topological deformation on a contour. A narrow band level set method has been developed to evolve the contour of antennas and arrays using the deformation velocity computed from the shape gradient. Different configurations of antennas and antenna arrays are studied for investigating the performance of the optimization algorithm. Frequency hopping and multi-frequency techniques have been used for optimizing the shape within a frequency band. Shape optimization for planar antenna miniaturization has a large number of applications, particularly, for reflectarrays

In this master´s thesis an issue of broadband planar antennas was analyzed. Firstly, the basic elements that affect bandwidth, such as the influence of the dieletric substrate, suitable shape or feeding network, were described. Furthermore technics that can be used to widen the band of the planar antennas were described. These technics were applied to a chosen type of a planar antenna. This antenna was modeled and simulated for desired dielectric substrate in CST STUDIO SUITE 2010 software. Feeding network with power dividers was designed for the antenna array. In order to obtain a higher gain, the antenna was implemented into the 2x2 element array. The results of the simulation are evaluated in the conclusion.

A simple and novel dual-CP printed antenna is modelled and measured. The patch antennais small and achieves a low axial ratio without quadrature feeding. The measured pattern showsaxial ratio pattern squinting over frequency. Possible methods of improving the individual element are discussed, as well as an array technique for improving the axial ratio bandwidth. Three endfire printed antenna structures are designed, analyzed, and compared. The comparison includes an analysis of costs of production for the antenna structures in addition to their performance parameters. This analysis concludes that cost of materials primarily reduces the size of antennas for a given gain and bandwidth. An antenna stucture with an annular beam pattern for down-looking navigational radar is proposed. The antenna uses sub-wavelength grating techniques from optics to achieve a highly directive planar reflector which is used as a ground plane for a monopole. A fan-beam array element is fabricated for use in a digitally steered receive array for obstacle avoidance radar. The steered beam pattern is observed. The element-dependent phase shifts for a homodyned signal in particular are explored as to their impact on beam steering.

The main objectives of this research are to investigate and design low profile antennas for mobile handsets applications using the balanced concept. These antennas are considered to cover a wide range of wireless standards such as: DCS (1710¿1880 MHz), PCS (1850¿1990 MHz), UMTS (1920¿2170 MHz), WLAN (2400¿2500 MHz and 5000 ¿ 5800 MHz) and UWB frequency bands. Various antennas are implemented based on built-in planar dipole with a folded arm structure. The performance of several designed antennas in terms of input return loss, radiation patterns, radiation efficiency and power gain are presented and several remarkable results are obtained. The measurements confirm the theoretical design concept and show reasonable agreement with computations. The stability performance of the proposed antenna is also evaluated by analysing the current distribution on the mobile phone ground plane. The specific absorption rate (SAR) performance of the antenna is also studied experimentally by measuring antenna near field exposure. The measurement results are correlated with the calculated ones. A new dual-band balanced antenna using coplanar waveguide structure is also proposed, discussed and tested; this is intended to eliminate the balanced feed network. The predicted and measured results show good agreement, confirming good impedance bandwidth characteristics and excellent dual-band performance. In addition, a hybrid method to model the human body interaction with a dual band balanced antenna structure covering the 2.4 GHz and 5.2 GHz bands is presented. Results for several test cases of antenna locations on the body are presented and discussed. The near and far fields were incorporated to provide a full understanding of the impact on human tissue. The cumulative distribution function of the radiation efficiency and absorbed power are also evaluated. / UK Engineering and Physical Sciences Research Council (EPSRC)

The main objectives of this research are to investigate and design low profile antennas for mobile handsets applications using the balanced concept. These antennas are considered to cover a wide range of wireless standards such as: DCS (1710-1880 MHz), PCS (1850-1990 MHz), UMTS (1920-2170 MHz), WLAN (2400-2500 MHz and 5000-5800 MHz) and UWB frequency bands. Various antennas are implemented based on built-in planar dipole with a folded arm structure. The performance of several designed antennas in terms of input return loss, radiation patterns, radiation efficiency and power gain are presented and several remarkable results are obtained. The measurements confirm the theoretical design concept and show reasonable agreement with computations. The stability performance of the proposed antenna is also evaluated by analysing the current distribution on the mobile phone ground plane. The specific absorption rate (SAR) performance of the antenna is also studied experimentally by measuring antenna near field exposure. The measurement results are correlated with the calculated ones. A new dual-band balanced antenna using coplanar waveguide structure is also proposed, discussed and tested; this is intended to eliminate the balanced feed network. The predicted and measured results show good agreement, confirming good impedance bandwidth characteristics and excellent dual-band performance. In addition, a hybrid method to model the human body interaction with a dual band balanced antenna structure covering the 2.4 GHz and 5.2 GHz bands is presented. Results for several test cases of antenna locations on the body are presented and discussed. The near and far fields were incorporated to provide a full understanding of the impact on human tissue. The cumulative distribution function of the radiation efficiency and absorbed power are also evaluated.

L'objectif général est de développer un nouvel outil numérique dédié à la focalisation en 3D de l'énergie en zone de champ très proche par un système antennaire. Cet outil permettra de définir la distribution spatiale complexe des champs dans l'ouverture rayonnante afin de focaliser l'énergie sur un volume quelconque en zone de champ réactif. L'hybridation de cet outil avec un code de calcul dédié à l'analyse rapide d‘antennes SIW par la méthode des moments permettra de synthétiser une antenne SIW ad-hoc. Les structures antennaires sélectionnées seront planaires comme par exemple les antennes RLSA (Radial Line Slot Array). Les dimensions de l'antenne (positions, dimensions et nombre de fentes) seront définies à l'aide des outils décrits ci-dessus. Les résultats numériques ainsi obtenus seront validés d'abord numériquement par analyse électromagnétique globale à l'aide de simulateurs commerciaux, puis expérimentalement en ondes millimétriques (mesure en zone de champ très proche). Pour atteindre ces objectifs, nous avons défini quatre tâches principales : Développement d'un outil de synthèse de champ dans l'ouverture rayonnante (formulation théorique couplée à une méthode dite des projections alternées) ; développement d'un outil de calcul rapide (sur la base de traitements par FFT) du champ électromagnétique rayonné en zone de champ proche par une ouverture rayonnante, et retro-propagation ; hybridation de ces algorithmes avec un code de calcul (méthode des moments) en cours de développement à l'IETR et dédié à l'analyse très rapide d'antennes en technologie SIW ; conception d'une preuve ou plusieurs preuves de concept, et validations numérique et expérimentale des concepts proposés. / With the demand for near-field antennas continuously growing, the antenna engineer is charged with the development of new concepts and design procedures for this regime. From the microwave and up to terahertz frequencies, a vast number of applications, especially in the biomedical domain, are in need for focused or shaped fields in the antenna proximity. This work proposes new theoretical methods for near-field shaping based on different optimization schemes. Continuous radiating planar apertures are optimized to radiate a near field with required characteristics. In particular, a versatile optimization technique based on the alternating projection scheme is proposed. It is demonstrated that, based on this scheme, it is feasible to achieve 3-D control of focal spots generated by planar apertures. Additionally, with the same setup, also the vectorial problem (shaping the norm of the field) is addressed. Convex optimization is additionally introduced for near-field shaping of continuous aperture sources. The capabilities of this scheme are demonstrated in the context of different shaping scenarios. Additionally, the discussion is extended to shaping the field in lossy stratified media, based on a spectral Green's functions approach. Besides, the biomedical applications of wireless power transfer to implants and breast cancer imaging are addressed. For the latter, an extensive study is included here, which delivers an outstanding improvement on the penetration depth at higher frequencies. The thesis is completed by several prototypes used for validation. Four different antennas have been designed, based either on the radial line slot array topology or on metasurfaces. The prototypes have been manufactured and measured, validating the overall approach of the thesis.

Made available in DSpace on 2014-12-17T14:55:34Z (GMT). No. of bitstreams: 1 GeorgeDFA_Capa_ate_pag15.pdf: 8968407 bytes, checksum: 05f7b40d8df8312cf173aaad3ec43f83 (MD5) Previous issue date: 2006-08-04 / Recently, planar antennas have been studied due to their characteristics as well as the advantages that they offers when compared with another types of antennas. In the mobile communications area, the need for this kind of antennas have became each time bigger due to the intense increase of the mobile communications this sector. That needs of antennas which operate in multifrequency and wide bandwidth. The microstrip antennas presents narrow bandwidth due the loss in the dielectric generated by radiation. Another limitation is the radiation pattern degradation due the generation of surface waves in the substrate. In this work some used techniques to minimize the disadvantages (previously mentioned) of the use of microstrip antennas are presented, those are: substrates with PBG material - Photonic Bandgap, multilayer antennas and with stacked patches. The developed analysis in this work used the TTL - Transverse Transmission Line method in the domain of Fourier transform, that uses a component of propagation in the y direction (transverse to the direction real of propagation z), treating the general equations of electric and magnetic field as functions of Ey and Hy. One of the advantages of this method is the simplification of the field equations. therefore the amount of equations lesser must the fields in directions x and z be in function of components Ey and Hy. It will be presented an brief study of the main theories that explain the superconductivity phenomenon. The BCS theory. London Equations and Two Fluids model will be the theories that will give support the application of the superconductors in the microfita antennas. The inclusion of the superconductor patch is made using the resistive complex contour condition. This work has as objective the application of the TTL method to microstrip structures with single and multilayers of rectangular patches, to obtaining the resonance frequency and radiation pattern of each structure / Recentemente as antenas planares t?m despertado interesses devido ?s suas caracter?sticas, assim como pelas vantagens que oferecem quando comparadas com os demais tipos de antenas. Na ?rea de comunica??es m?veis a necessidade de antenas desse tipo tem-se tornado cada vez maior devido ao intenso crescimento desse setor, necessitando de antenas que operem em multifreq??ncia e em banda larga. As antenas de microfita apresentam largura de banda estreita devido ?s perdas no diel?trico geradas pela irradia??o. Outra limita??o ? a degrada??o do diagrama de irradia??o devido ? gera??o de ondas de superf?cie no substrato. Neste trabalho s?o apresentadas algumas t?cnicas usadas para tentar minimizar as desvantagens (citadas acima) do uso de antenas de microfita, sendo elas: substratos com material PBG - Photonic Bandgap, antenas em multicamadas e a utiliza??o de patches fabricados de materiais supercondutores. As an?lises desenvolvidas neste trabalho foram realizadas com a utiliza??o do m?todo LTT - Linha de Transmiss?o Transversa no dom?nio da transformada de Fourier, que utiliza uma componente de propaga??o na dire??o y (transversa ? dire??o real de propaga??o z), tratando assim as equa??es gerais dos campos el?tricos e magn?ticos em fun??es de Ey e Hy. Uma das vantagens desse m?todo ? a simplifica??o das equa??es de campo, pois a quantidade de equa??es ? menor devido os campos nas dire??es x e z ficarem em fun??o das componentes Ey e Hy. Ser? apresentado um breve estudo das principais teorias que explicam o fen?meno da supercondutividade. As teorias BCS, Equa??es de London e modelo dos Dois Fluidos ser?o as teorias que dar?o suporte a aplica??o dos supercondutores nas antenas microfita. A inclus?o do patch supercondutor ? feita utilizando-se a condi??o de contorno complexa resistiva. Este trabalho tem como objetivo a aplica??o do m?todo LTT ?s estruturas de microfita

La focalisation du champ électromagnétique dans les zones de champ proche et lointain est un sujet de forte actualité pour l'imagerie médicale et la radiométrie des microondes jusqu'aux ondes millimétriques. Dans ce cadre, la théorie des ondes de fuite est un formalisme élégant qui permet de décrire d'une même façon les problèmes radiatifs en champ proche et en champ lointain des microondes aux fréquences optiques. Dans cette thèse, on utilise la polyvalence de la théorie des ondes de fuite pour développer des systèmes rayonnants complexes afin de contrôler les caractéristiques radiatives en champ lointain aux fréquences submillimétriques et pour focaliser la radiation électromagnétique en champ proche aux fréquences millimétriques. Ainsi, l'utilisation de matériaux uniques comme le graphène et les cristaux liquides ont été considérés pour la conception des antennes à ondes de fuite, en obtenant des résultats très intéressants en termes de reconfigurabilité, d'efficience et de directivité. Dans ce contexte, une analyse théorique originale a fourni de nouvelles formules pour l'évaluation des caractéristiques radiatives (c.à.d. la largeur de faisceau, le niveau des lobes secondaires, etc.) des antennes à ondes de fuite. En effet, la largeur du faisceau de ces antennes est, jusqu'à présent, estimée au moyen des formules proposées pour la première fois dans les années '60 par Prof. Arthur A. OLINER. Ces formules ne tiennent en compte ni de la longueur de l'antenne (sauf pour des cas très particuliers), ni du rayonnement longitudinal, elles ne permettent donc pas une évaluation rigoureuse.En complément à la reconfigurabilité en champ lointain, les ondes de fuite offrent aussi la possibilité de focaliser la radiation en champ proche. Dans ce cas, on voit que les ondes de fuite peuvent être utilisées d'une façon efficace pour générer des faisceaux non diffractifs de Bessel à travers des systèmes rayonnants à bande étroite aux ondes millimétriques. De plus, le caractère non diffractif des faisceaux de Bessel peut aussi être utilisé pour générer des impulsions très localisées (comme les solitons en optiques) à travers la superposition continue des faisceaux de Bessel sur une large bande de fréquence. Dans ce cadre, une nouvelle formulation a été développée afin de comprendre les limitations physiques et technologiques concernant la génération des impulsions non diffractives et non dispersives, c.à.d. les X-waves. Les résultats ont montré qu'un type de systèmes rayonnants à large bande, notamment les antennes RLSA (en anglais « Radial Line Slot Array »), semblent très favorables pour la génération des X-waves. / In recent years, microwave, millimeter-wave, and THz applications such as medical and security imaging, wireless power transfer, and near-field focusing, just to mention but a few, have gained much attention in the area of ICT due to their potentially high social impact. On one hand, the need of highly-directive THz sensors with tunable radiating features in the far-field region has recently boosted the research activity in the design of flexible, low-cost and low-profile devices. On the other hand, it is of paramount importance to focus energy in the near-field region, and thus the generation of limited-diffraction waves in the microwave and millimeter-wave regime is a topic of recent increasing interest. In this context, leaky-wave theory is an elegant and extremely useful formalism which allows for describing in a common fashion guiding and radiating phenomena in both the near field and the far field, spanning frequencies from microwaves to optics passing through THz. In this PhD thesis we aim to exploit the intrinsic versatility of the leakywave approach to design advanced radiating systems for controlling the far-field radiating features at THz frequencies and for focusing electromagnetic radiation in the near field at millimeter waves. Specifically, the use of relatively new materials such as graphene and liquid crystals has been considered for the design of leaky-wave based radiators, achieving very promising results in terms of reconfigurability, efficiency, and radiating capabilities. In this context, an original theoretical analysis has provided new general formulas for the evaluation of the radiating features (e.g., half-power beamwidth, sidelobe level, etc.) of leaky-wave antennas. Indeed, the current formulations are based on several simplifying hypotheses which do not allow for an accurate evaluation of the beamwidth in different situations. In addition to the intriguing reconfigurable capabilities offered by leaky waves in far-field applications, interesting focusing capabilities can be obtained in the near field. In particular, it is shown that leaky waves can profitably be used to generate limited-diffraction Bessel beams by means of narrow-band radiators in the microwave range. Also, the use of higherorder leaky-wave modes allows for achieving almost the same performance in the millimeter-wave range, where previous designs were subjected to severe fabrication issues. Even more interestingly, the limited-diffractive character of Bessel beams can also be used to generate limited-diffraction pulses as superpositions of monochromatic Bessel beams over a considerable fractional bandwidth. In this context, a novel theoretical framework has been developed to understand the practical limitations to efficiently generate limited-diffraction, limited-dispersion pulses, such as X-waves, in the microwave/millimeter-wave range. As a result of this investigation, a class of wideband radiators has been thoroughly analyzed, showing promising capabilities for the generation of both zeroth-order and higher-order Xwaves. The latter may pave the way for the first localized transmission of orbital angular momentum in the microwave range.