Made available in DSpace on 2014-12-17T14:58:19Z (GMT). No. of bitstreams: 1 RaphaelSF_DISSERT.pdf: 3572126 bytes, checksum: c44c0bf716695541147f2e019fde49de (MD5) Previous issue date: 2013-04-12 / Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico / The growing demand in the use of hybrid composite materials makes it essential a better understanding of their behavior face of various design conditions, such as the presence of geometric discontinuities in the cross section of structural elements. This way, the purpose of this dissertation is a study of the mechanical response (strength and stiffness), modes (characteristics) of fracture and Residual Strength of an hybrid polymeric composite with and without a geometric discontinuity in its longitudinal section (with a reduction in the cross section) loaded by uniaxial tension. This geometric discontinuity is characterized by central holes of different diameters. The hybrid composite was fabricated as laminate (plate) and consisting of ortho-tereftalic polyester matrix reinforced by 04 outer layers of Jute fibers bidirectional fabrics and 01 central layer of E-glass bidirectional fabric. The laminate was industrially manufactured (Tecniplas Nordeste Ind?stria e Com?rcio Ltda.), obtained by the hand lay-up technique. Initially, a study of the volumetric density of the laminate was made in order to verify its use in lightweight structures. Also were performed comparative studies on the mechanical properties and fracture modes under the conditions of the specimens without the central hole and with the different holes. For evaluating the possible influence of the holes in the structural stability of the laminate, the Residual Strength of the composite was determined for each case of variation in hole diameter. As a complementary study, analyses of the macroscopic final fracture characteristic of the laminates were developed. The presence of the central hole of any sizes, negatively changed the ultimate tensile strength. Regarding the elastic modulus, moreover, the difference found between the specimens was within the range of tests displacement, showing the laminate stability related to the stiffness / A crescente demanda na utiliza??o dos materiais comp?sitos h?bridos torna imprescind?vel uma melhor compreens?o do seu comportamento frente ?s mais diversas condi??es de projeto, como a presen?a de descontinuidades geom?tricas nos elementos estruturais. Nesse sentido, a proposta desta disserta??o ? um estudo envolvendo a resposta mec?nica (resist?ncia e rigidez), os modos (caracter?sticas) da fratura e Resist?ncia Residual de um laminado comp?sito h?brido de matriz polim?rica com e sem presen?a de descontinuidade geom?trica em sua se??o longitudinal (com redu??o da se??o transversal), sob a a??o de tra??o uniaxial. Essa descontinuidade geom?trica ? caracterizada por furos centrais de diferentes di?metros. O laminado comp?sito h?brido foi confeccionado na forma de placa e composto por matriz poli?ster orto-tereft?lica refor?ada por 04 camadas externas de tecidos bidirecionais de fibras de juta e 01 camada central de tecidos bidirecionais de fibras de vidro-E. O laminado foi fabricado industrialmente (Tecniplas Nordeste Ind?stria e Com?rcio Ltda.), obtido atrav?s do processo de lamina??o manual (hand lay-up). Inicialmente, foi feito um estudo da densidade volum?trica do laminado, de modo a comprovar sua aplica??o em estruturas leves. Foram realizados estudos comparativos entre as propriedades mec?nicas nas condi??es dos corpos de prova sem o furo e com os diferentes di?metros do furo. Para a avalia??o de poss?vel influ?ncia da presen?a dos furos centrais na estabilidade estrutural do laminado, a Resist?ncia Residual foi determinada para cada caso de varia??o do di?metro do furo. Como estudo complementar, an?lises macrosc?picas da caracter?stica de fratura final dos laminados foram desenvolvidas. A presen?a do furo central, independente do di?metro, influiu de forma danosa, principalmente na resist?ncia ?ltima ? tra??o. Quanto ao m?dulo de elasticidade, por outro lado, a diferen?a encontrada entre os corpos de prova apresentou-se dentro da faixa da dispers?o dos ensaios, mostrando estabilidade com rela??o ? rigidez do laminado

Made available in DSpace on 2014-12-17T14:58:19Z (GMT). No. of bitstreams: 1 FernandoNS_DISSERT.pdf: 5044327 bytes, checksum: 66e88407297dda873c6a6d882b6de312 (MD5) Previous issue date: 2012-08-27 / Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico / A batch of eighty-four coupons of low carbon steel were investigated at laboratory conditions under a corrosive, cavitative-corrosive (CO2) and corrosive-erosive (SiO2 + CO2) in an aqueous salt solution and two levels of temperature. The following measurements were made on Vickers (HV0,05, HV0,10, HV0,20) Microhardness tests at three levels of subsurface layer. A turbulent flow collided on the cylindrical sample, with and without mechanical stirring and gas bubbling, with and without fluid contamination by solid particles of SiO2, at two temperatures. Surface Roughness and Waviness, under two conditions "as received, after machining" and "after worn out", as well as gravimetric and electrochemical parameter were measured on the two opposite generatrices of each cylindrical sample, on the flow upstream (0?) and downstream (180?) by Profilometry, Mass Variation and Linear Polarization Resistance (LPR). The results of the Microhardness and Surface Texture of all coupons were subjected to statistical comparison, using the software Statgraphics? Centurion XVI, 95% statistical certainty, and significant differences were observed in some arrays of measurements. The corrosive wear rate measured by LPR and mass variation shown to be sensitive to the presence of bubbles and hydrodynamic fluctuations inside the cell, considering the temperature and contamination of corrosive fluid by solid particles. The main results of visual inspection relative to some topologies of the surface damages involving different mechanisms that were seen to give explanation for some fluctuations in wear rates of the steel experimentally investigated / Um lote de oitenta e quatro corpos-de-prova (CP) de a?o AISI 1018 foi investigado em laborat?rio sob solicita??es corrosivas, cavitativo-corrosivas (CO2) e erosivocorrosivas (SiO2+CO2) em meio aquoso salino e a duas temperaturas. Foram realizados ensaios de microdureza Vickers a tr?s n?veis de subsuperf?cie (HV0,05, HV0,10, HV0,20). Um fluxo agitado colidiu contra os CPs, em todas as condi??es de ensaio, sem e com agita??o mec?nica e borbulhamento de g?s, sem e com contamina??o do fluido por part?culas s?lidas de SiO2, nas duas temperaturas estudadas. A rugosidade e ondula??o superficial, nas condi??es como recebidos, ap?s usinagem e ap?s desgastados , bem como medi??es gravim?tricas e eletroqu?micas foram realizadas em duas geratrizes opostas de cada corpo-deprova, a montante (0?) e a jusante (180?), atrav?s das t?cnicas de perfilometria, varia??o m?ssica e resist?ncia de polariza??o linear (RPL). Os resultados da microdureza e da textura superficial em todos CPs foram submetidos ? compara??o estat?stica, utilizando-se o software Statgraphics? Centurion XVI e, com 95% de certeza estat?stica, diferen?as significativas foram observadas em alguns grupos de medidas. As medidas das taxas de desgaste corrosivo, por RPL e por varia??o m?ssica, demonstraram serem sens?veis ? presen?a de bolhas e ?s flutua??es hidrodin?micas no interior da c?lula, consideradas a temperatura e a contamina??o do fluido corrosivo por part?culas s?lidas. Apresentam-se, tamb?m, os principais resultados da inspe??o visual em que se evidenciam algumas topologias do dano superficial nas geratrizes a 0? e a 180?, involvendo diferentes mecanismos que foram presenciados, para justificar algumas flutua??es nas taxas de desgaste do a?o em estudo

Made available in DSpace on 2014-12-17T15:03:29Z (GMT). No. of bitstreams: 1 KarisiaLBF_DISSERT.pdf: 5553904 bytes, checksum: bd332662da6ffbc4e0c2609d1d3928c7 (MD5) Previous issue date: 2012-01-27 / A technological alternative for the correct disposal of tires is the use in the construction of embankment with soil and shredded tires. The use of waste tires in tropical soils requires prior knowledge of the properties and limitations of these materials. In this work, the results of an experimental program was devised to characterize the behavior of mixtures of waste tires and a lateritic soil. The residue used in this study is classified as tire buffings with an average size of 1.4 mm. The laboratory program included testing of particle size analysis, Atterberg limits, compaction, direct shear tests, permeability and confined compression tests with pure soil, pure tire and the mixtures. Proportions of 0% (pure soil), 10%, 20%, 40%, 50 % and 100% (pure tire) by weight were used. For the confining stress levels used in the study, the presence of tire residue provided a considerable increase in shear strength of the mixture. The maximum shear strength was obtained for a residue content of 40% by weight. Permeability tests on samples of waste under a confining stress of 100 kPa showed that the permeability increases significantly with increasing residue content until a residue content of 20%. The increase in permeability after that value showed to be negligible. Confined compression tests showed that the soil mixed with tire residue becomes more compressible than the pure soil. The secant constrained modulus (Msec) for the same vertical stress decreases with increasing percentage of residue. / Dentre as alternativas tecnol?gicas para a destina??o correta de pneus est? o uso na constru??o de aterros de misturas de solo e res?duo de pneus triturados. A utiliza??o de res?duo de pneus em solos tropicais requer o conhecimento pr?vio das propriedades e limita??es desses materiais. Nesta disserta??o, apresentam-se os resultados de um programa experimental para caracteriza??o de misturas de res?duo de pneus em um solo later?tico. O res?duo utilizado neste estudo ? classificado como desbastes de pneus, com tamanho m?dio de 1,4 mm. O programa laboratorial incluiu ensaios de an?lise granulom?trica, limites de consist?ncia, compacta??o, cisalhamento direto, permeabilidade e compress?o confinada com as misturas de solo res?duos de pneus. Foram utilizadas propor??es de 0% (solo puro), 10%, 20%, 40%, 50% e 100% (res?duo puro) em peso. Para os n?veis de tens?o confinantes utilizados no estudo, a presen?a do res?duo de pneu proporcionou um aumento consider?vel da resist?ncia ao cisalhamento da mistura. A m?xima resist?ncia ao cisalhamento foi obtida para um teor de res?duo de 40% em peso. Os ensaios de permeabilidade em amostras de res?duos sob uma tens?o confinante de 100 kPa revelaram que a permeabilidade cresce significativamente com o aumento do teor de res?duo at? um teor de 20%, estabilizando-se em seguida. Os ensaios de compress?o confinada evidenciaram que o solo misturado ao res?duo de pneus torna-se mais compress?vel que o solo puro. O estudo demonstra que o m?dulo de compress?o confinada secante (Msec) para uma mesma tens?o vertical diminui com o aumento da porcentagem de res?duo.

O presente trabalho tem como objetivo desenvolver um processo de fabricação de elementos micro-ópticos utilizando-se litografia por feixe de elétrons, empregando o resiste SU-8, negativo e amplificado quimicamente, sobre substrato de Si. Para tanto, é realizado o estudo dos parâmetros do efeito de proximidade a, b e h para se modelar e controlar os efeitos do espalhamento dos elétrons no resiste e no substrato, e se altera o processamento convencional do SU-8 para se obter um processo com baixo contraste. A determinação dos parâmetros do efeito de proximidade para o sistema de escrita direta e amostra SU-8 / Si é feita experimentalmente e por simulação de Monte Carlo. Particularmente, verifica-se a dependência dos mesmos com a profundidade do resiste. Primeiramente utilizando o software PROXY, obtêm-se a, b e h da observação de padrões de teste revelados. Chega-se a 4m para o parâmetro () que mede o retroespalhamento dos elétrons pelo substrato e 0,7 para a relação (h) entre a intensidade destes com aquela dos elétrons diretamente espalhados pelo resiste (alcance dado por a). Ainda, com esses dados, estima-se o diâmetro do feixe do microscópio eletrônico de varredura a partir da equação de aproximação de espalhamento direto para pequenos ângulos (a = 128nm na superfície do resiste) e se determina a resolução lateral do processo (a = 800nm na interface resiste/ substrato, para um filme de 2,4m). Em seguida, usa-se o software CASINO para se calcular os parâmetros de proximidade a partir da curva de densidade de energia dissipada no resiste obtida pela simulação da trajetória de espalhamento dos elétrons. Confrontam-se, finalmente, os valores obtidos pelos dois métodos. Em relação ao processamento do resiste SU-8, são determinadas as condições experimentais para a fabricação de estruturas tridimensionais por litografia de feixe de elétrons. Especificamente, busca-se desenvolver um processo com características (espessura, contraste, sensibilidade e rugosidade) adequadas para a fabricação de micro-dispositivos ópticos. Inicia-se com o levantamento das curvas de contraste e da sensibilidade do SU-8 para determinadas temperaturas de aquecimento pós-exposição. Obtém-se contraste abaixo de 1 para aquecimento pós-exposição abaixo da temperatura de transição vítrea do resiste, mantendo-se sensibilidade elevada (2C/cm2). Em seguida, mede-se a rugosidade da superfície do filme revelado para diferentes doses de exposição. Para finalizar, submete-se a amostra a um processo de cura e escoamento térmico, para melhorar a dureza e a rugosidade do resiste a ser utilizado como dispositivo final Consegue-se um valor de rugosidade (40nm) inferior a 20 vezes o comprimento de onda de diodo laser de eletrônica de consumo. Por fim, é produzido um dispositivo com perfil discretizado em 16 níveis como prova de conceito. / This work aims at developing an electron-beam lithography process for the fabrication of microoptical elements using the negative tone chemically amplified resist SU-8 on Si substrate. A study of the proximity effect parameters a, b and h is carried out to model and control the electron scattering both in the resist and in the substrate, and the SU-8 standard processing conditions are changed to achieve a low contrast process. The determination of the SU-8 / Si proximity effect parameters and its dependence with resist depth is done employing an experimental method and through Monte Carlo simulations. First, a, b and h are obtained comparing exposed patterns calculated by the software PROXY. b, the parameter which measures the backscattering of the electrons by the substrate, is equal to 4m and the value of h, the ratio of the dose contribution of backscattered electrons to that of the forward scattered (related to a), is 0.7. The extrapolation of exposed patterns data is used to estimate the scanning electron microscope beam diameter through the equation for low angle scattering (a = 128nm at the resist surface) and the lateral resolution of the process is determined (a = 800nm at the resist/ substrate interface, for a 2.4m film). With aid of the software CASINO, Monte Carlo simulations of the scattering trajectories of electrons in substrate and resist materials are calculated, recording the energy that they dissipate through collisions along their path. The results obtained representing the profile of the energy dissipated in the resist are used to determine the proximity effect parameters. The experimental method results are compared to that obtained by simulation. Regarding the SU-8 processing, the process parameters for the fabrication of three-dimensional structures by electron-beam lithography are determined. The process is designed to have specifications (thickness, contrast, sensitivity and surface roughness) suitable for microoptical elements fabrication. It begins with the determination of the SU-8 contrast curve and its sensitivity for specific post-exposure bake temperatures. A below the unit contrast process with high sensitivity (2C/cm2) is achieved postannealing the sample below the resist glass transition temperature. The film surface roughness is measured after resist development for different exposure doses, and a controlled hardbake (cure) and reflow is carried to enhance both the mechanical properties and the surface roughness of the structures that will remain as part of the final device. A RMS roughness of 40nm, lower than 20 times the wavelength of consumer electronics laser diode, is obtained. The electron-beam process designed is applied to the fabrication of a microelement with a 16-level profile discretization.

Submitted by Ricardo Cedraz Duque Moliterno (ricardo.moliterno@uefs.br) on 2015-11-12T01:11:08Z No. of bitstreams: 1 Disserta??o Adriana Fidelis - Vers?o Definitiva.pdf: 9437752 bytes, checksum: f708082e56eba193c45496d67cab5993 (MD5) / Made available in DSpace on 2015-11-12T01:11:08Z (GMT). No. of bitstreams: 1 Disserta??o Adriana Fidelis - Vers?o Definitiva.pdf: 9437752 bytes, checksum: f708082e56eba193c45496d67cab5993 (MD5) Previous issue date: 2013-03-13 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior - CAPES / In the 1960? the mining company Plumbum Mineradora was installed in the Satate of Bahia, Brazil. This company, which produced lead ingots for 33 years, left over 400,000 tons of slag, which contained, among other pollutants, cadmium and lead. These metals are currently found in the soil surrounding the old factory, in concentrations considered highly toxic. A study was started to investigate possible bioremediation in the area with the isolation of bacteria from the rhizosphere of local plants, followed by the test in their performance in metals contaminant tolerance. Finally, identification of the bacteria was made based on molecular marker 16S rRNA. The isolation protocol was carry out using Nutrient Agar and after obtaining a pure culture. The isolates were then subjected to tests of Minimum Inhibitory Concentration (CIM). Each isolate served as a source for extraction of DNA for molecular analysis with 16S rRNA region. Among the rhizospheres collected, those from which the greatest number of species were isolated from plants with a perennial habit, among them the castor bean (Ricinus communis L.) and emba?ba (Cecropia pachystachya Tr?cul) which together comprised approximately 38% of all species of bacteria obtained. Interestingly, from the castor bean (an exotic plant in Brazil), 2/3 of the bacteria were Gram negative, while from the emba?ba (a native plant of Brazil), ? of the bacteria isolated were of Gram positive. Regardless of the classification of Gram, the bacteria studied showed higher tolerance to lead; 70% of Gram negative bacteria showed conspicuous morphological changes, whereas of those that were Gram positive, only 13% demonstrated. In addition, these bacteria have been identified by molecular analysis using the 16S rRNA marker. The used methodology based on analysis of parsimony and distance trees. As a result, the region 16S was able to identify only 22% of species while the remain species could only be identified to genus or to infra-generic groups. Therefore, the data suggest that the Gram negative and Gram positive bacteria have distinct mechanisms of adaptation in environments polluted by lead and cadmium and that the 16S region is not an efficient universal barcode marker, which should be used only as the first step on the identification of bacteria. Although this study does not provide a final parameter for ecological factors under consideration here, it provides an insight into the influence of the plant habitat on bacterial communites, and the role of Gram in the mechanisms of tolerance. It is hope to explore these aspects in the further studies. / Na d?cada de 60, a empresa de minera??o Plumbum Mineradora foi instalada no Estado da Bahia, Brasil. Esta empresa, a qual produziu lingotes de chumbo por 33 anos, deixou mais de 400.000 toneladas de esc?ria, a qual continha, dentre outros poluentes, c?dmio e chumbo. Estes metais s?o, atualmente, encontrados no solo do entorno das antigas instala??es da f?brica, em concentra??es consideradas altamente t?xicas. Este estudo come?ou a investigar a biorremedia??o da ?rea com o isolamento de bact?rias das rizosferas de plantas locais, seguido por testar a toler?ncia das bact?rias a esses metais. Finalmente, a identifica??o de bact?rias foi feita baseada no marcador molecular 16S rRNA. O protocolo de isolamento foi realizado em meio de Agar Nutriente e ap?s a obten??o de cultura pura, os isolados foram submetidos a testes de Concentra??o Inibit?ria M?nima (CIM). Cada isolado serviu de fonte para extra??es de DNA para an?lise molecular com a regi?o 16S rRNA. Dentre as rizosferas coletadas, as que mais se destacaram em rela??o a quantidade de esp?cies isoladas foram as plantas de h?bito perene, dentre elas, a mamona (Ricinus comunis L.) e a emba?ba (Cecropia pachystachya Tr?cul), que abrigaram juntas aproximadamente 38% de todas as esp?cies de bact?rias obtidas. Interessante notar que da mamona (uma planta ex?tica no Brasil), 2/3 das bact?rias foram Gram negativas, enquanto que da emba?ba (uma planta nativa do Brasil), 3/4 das bact?rias isoladas foram Gram positivas. Independentemente da classifica??o do Gram, as bact?rias apresentaram maior resist?ncia ao chumbo; 70% das Gram negativas apresentaram mudan?as morfol?gicas acentuadas, enquanto que estas, nas Gram positivas, manifestaram-se em apenas 13%. Al?m disso, estas bact?rias foram identificadas por meio de an?lise molecular, com o uso do marcador 16S rRNA. A metodologia usada foi baseada em an?lise de ?rvores de parcim?nia e dist?ncia. Como resultado, a regi?o 16S foi capaz de identificar 22% das esp?cies, enquanto que para o restante mostrou-se eficiente para classifica??o at? g?nero ou para agrupamentos infragen?ricos. Portanto, os dados sugerem que as bact?rias Gram negativas e Gram positivas possuem mecanismos de adapta??es distintos em ambientes polu?dos por chumbo e c?dmio e que a regi?o 16S n?o ? eficiente como marcador universal tipo ?c?digo de barras?, o qual deve ser utilizado apenas como a primeira ferramenta de identifica??o de bact?rias isoladas. Apesar deste estudo n?o servir como par?metro definitivo para considera??es ecol?gicas, ele fornece conhecimento sobre a influ?ncia do h?bito da planta sobre a comunidade bacteriana e o papel da estrutura morfol?gica das bact?rias (Gram) nos mecanismos de toler?ncia. Espera-se que estes dados possam ser explorados em estudos posteriores.

This thesis deals with deposition of GaN thin films and GaN selective growth utilizing pyrolyzed resist masks. Carbon masks were prepared on silicon substrates by electron-beam litography and resist pyrolysis. As a further step, Ga and GaN were deposited on the masked substrates by Moleculer Beam Epitaxy (MBE) method. A selective growth of Ga droplets was achieved. These results were used for preparation of GaN crystallites by pulse deposition. It is also shown that direct MBE deposition of GaN on the masked substrates leads to a selective growth of GaN thin films with GaN film growing only on the areas which are not covered by the carbon mask. The results are explained by enhanced surface diffusion of gallium atoms on the surface of the carbon mask.

The work is particularly aimed at metallurgical problems connected with manufacture of castings of weight about 1 up to 40 tons from high-alloy austenitic nickel cast irons also known under the trade name Ni-resist. The main aim is to check and complement the knowledge about manufacture of heavy castings from austenitic nickel cast irons in a field of control of tapping and casting temperature, carbon content control with regard to the prediction of eutectic composition and in a field of setting a suitable chemical composition of cast iron with regard to the formation of chunky graphite and stability of the austenitic matrix and further on also possibilities of cast iron filtration during pouring the castings. Based on done experiments the formulae were determined that enable to calculate eutectic and liquidus temperatures on the basis of chemical composition of the cast iron. The use of several formulae given in the literature for calculating the carbon equivalent of austenitic nickel cast irons was compared and evaluated. For utilization of determined results in practice a calculating programme has been compiled making possible to be used in operational practice. This programme is named Calculation of casting temperature of Ni-resist cast irons. After the entry of the melt chemical composition the programme calculates the all important parameters necessary to know and to be controlled for manufacture of high quality castings from austenitic nickel cast irons. Eutectic temperature, liquidus temperature and then based on it the tapping and casting temperatures are included among those parameters. Further on there are eutectic concentration of carbon, carbon equivalent, nickel equivalent, and a criterion evaluating a danger of chunky graphite formation.

Submitted by SBI Biblioteca Digital (sbi.bibliotecadigital@puc-campinas.edu.br) on 2017-08-30T18:38:02Z No. of bitstreams: 1 LUCAS ALVES DE LIMA NIC?SIO.pdf: 34799286 bytes, checksum: addbc267f24556eec3d04519ec6fd916 (MD5) / Made available in DSpace on 2017-08-30T18:38:02Z (GMT). No. of bitstreams: 1 LUCAS ALVES DE LIMA NIC?SIO.pdf: 34799286 bytes, checksum: addbc267f24556eec3d04519ec6fd916 (MD5) Previous issue date: 2017-06-30 / The present study seeks to raise issues relating to the housing rights by observing the actions of social movements in particular in the central area of the city of S?o Paulo (district of Rep?blica) considering its impact on the territory and in society. The condition of vulnerability in the residence is present both in central areas as the edges urban peripheral areas, however, the housing programs need to be subdivided according to the location, because many times does not believe that it comes from different contexts with specific needs. Even the social movements who are fighting for the housing rights still experience ways of dealing with the issue of the centrality and the resistance has been the main instrument for guaranteeing rights and encourage discussion with the various actors (society, real estate market, State) that produce the urban space. The research investigates how the housing of low-income population and its dynamics in central areas is understood, managed, accept and even compelled by society, by the real estate market and by the State and which institutional tools the movements have for the maintenance of guaranteed rights. Take as the object of research the occupations of idle buildings in the center of S?o Paulo in particular "Occupation S?o Jo?o" and the role of the ?Front of Fight for Housing? - the FLM (Frente de Luta pela Moradia) - entered the territory of the district of Rep?blica. / O presente estudo busca levantar quest?es referentes ao direto ? moradia observando a atua??o dos movimentos sociais em especial na regi?o central da cidade de S?o Paulo (distrito da rep?blica) considerando seu impacto no territ?rio e na sociedade. A condi??o de vulnerabilidade na moradia est? presente tanto nas ?reas centrais como nas bordas perif?ricas urbanas, entretanto, os programas habitacionais carecem de distin??o segundo a localiza??o, pois muitas vezes n?o considera que se trata de contextos distintos com necessidades espec?ficas. At? mesmo os movimentos sociais experientes que lutam pelo direito ? moradia ainda experimentam formas de lidar com a quest?o da centralidade e a resist?ncia tem sido a principal instrumento para a garantia de direitos e fomentar a discuss?o com os diferentes atores (sociedade, mercado, Estado) que produzem o espa?o urbano. A pesquisa investiga como a moradia da popula??o de baixa renda e suas din?micas em ?reas centrais ? entendida, gerida, aceita e at? combatida pela sociedade, pelo mercado e pelo Estado e quais ferramentas institucionais os movimentos possuem para a manuten??o da garantia de direitos. Toma-se como objeto da pesquisa as ocupa??es de edifica??es ociosas no centro de S?o Paulo em especial a ?Ocupa??o S?o Jo?o? e a atua??o da Frente de Luta por Moradia ? a FLM ? inseridas no territ?rio do distrito da rep?blica.

Made available in DSpace on 2014-12-17T15:42:01Z (GMT). No. of bitstreams: 1 IedaNSM.pdf: 5948604 bytes, checksum: dbf245a349dd04cff535e8ba2e89601d (MD5) Previous issue date: 2007-07-06 / The aim of this work was to study a series of 11 different compositions of Ti-Zr binary alloys resistance to aggressive environment, i. e., their ability to keep their surface properties and mass when exposed to them as a way to evaluate their performance as biomaterials. The first stage was devoted to the fabrication of tablets from these alloys by Plasma-Skull casting method using a Discovery Plasma machine from EDG Equipamentos, Brazil. In a second stage, the chemical composition of each produced tablet was verified. In a third stage, the specimen were submitted to: as-cast microstructure analysis via optical and scanning electron microscopy (OM and SEM), x-ray dispersive system (EDS) chemical analysis via SEM, Vickers hardness tests for mechanical evaluation and corrosion resistence tests in a 0.9% NaCl solution to simulate exposition to human saliva monitored by open circuit potential and polarization curves. From the obtained results, it was possible to infer that specimens A1 (94,07 wt% Ti and 5,93% wt% Zr), A4 (77,81 wt % Ti and 22,19 wt % Zr) and A8 (27,83 wt% Ti and 72,17 wt% Zr), presented best performance regarding to corrosion resistance, homogeneity and hardness which are necessary issues for biomaterials to be applied as orthopedic and odontological prosthesis / Este trabalho teve como finalidade estudar uma s?rie de onze ligas met?licas bin?rias, tit?nio zirc?nio, quanto ? capacidade de resistirem ?s deteriora??es sem sofrerem modifica??es de suas propriedades iniciais de massa e superf?cie quando expostas a meios agressivos, como condi??o fundamental para que as mesmas sejam aplicadas como biomateriais. A primeira etapa tratou da confec??o das amostras das ligas em forma de pastilhas, empregando-se o processo de fundi??o Plasma Skull realizado na m?quina Discovery Plasma, produzida no Brasil pela EDG Equipamentos. Na segunda etapa, as amostras confeccionadas foram submetidas aos ensaios para a determina??o da composi??o qu?mica resultante de cada liga da s?rie ap?s a fus?o. E durante a terceira etapa foram feitos os procedimentos de avalia??es das amostras quanto ? homogeneidade e apresenta??o da microestrutura de cada uma das ligas no estado bruto de fus?o, como resultados dos ensaios metalogr?ficos por microscopia ?ptica e microscopia eletr?nica de varredura acoplada a espectroscopia por energia dispersiva de raios-x; quanto ? propriedade mec?nica de dureza medida em escala Vickers (HV); e quanto ?s propriedades qu?micas de resist?ncia ? corros?o, quando expostas em solu??o de cloreto de s?dio 0,9 %, para simular a saliva, empregando-se o monitoramento do potencial de circuito aberto e as curvas de polariza??o. A partir dos resultados obtidos foi poss?vel identificar as pastilhas de composi??es qu?micas A1 (94,07% de Ti e 5,93% de Zr), A4 (77,81% de Ti e 22,19% de Zr) e A8 (27,83% de Ti e 72,17% de Zr) que resultaram como maiores detentoras do conjunto de propriedades de resist?ncia ? corros?o, homogeneidade e dureza, as quais s?o mais necess?rias em biomateriais tipo pr?teses ortop?dicas ou odontol?gicas

À l’heure actuelle, les modèles photochimiques utilisés dans la correction des effets de proximitéoptique (OPC) en photolithographie sont devenus complexes et moins physiques afin de permettre decapturer rapidement le maximum d’effets optiques et chimiques. La question de la stabilité de tels modèlespurement empiriques est devenue d’actualité. Dans ce mémoire, nous avons étudié la stabilité desmodèles photochimiques actuels en examinant les différentes causes d’instabilité vis-à-vis des paramètresdu procédé. Dans la suite, nous avons développé une méthode perturbative permettant d’évaluer le critèrede la stabilité. L’obtention de modèles simples et stables nous conduit à séparer les effets optiques desautres effets chimiques. De plus, les approximations utilisées dans la modélisation des systèmes optiquesopérant à grande ouverture numérique entraînent des erreurs résiduelles pouvant dégrader la précisionet la stabilité des modèles OPC. Ainsi, nous nous sommes intéressés à étudier les limites de validitéde l’approximation de Kirchhoff, méthode qui, jusqu’à présent, est la plus utilisée dans la modélisationdu champ proche d’un masque. D’autres méthodes semi-rigoureuses, permettant de modéliser les effetstopographiques, ont été également évaluées. Ces méthodes approchées permettent de gagner en précisionmais dégradent le temps de calcul. Nous avons ainsi proposé différentes façons de corriger les effetstopographiques du masque, tout en gardant l’approximation de Kirchhoff dans la modélisation de la partieoptique. Parmi les méthodes proposées, nous exploitons celle permettant de réduire les erreurs liéesaux effets topographiques du masque par l’intermédiaire d’un second modèle empirique. Nous montronsque pour garantir une précision adéquate, il est nécessaire d’augmenter la complexité du modèle en rajoutantdes termes additionnels. Enfin, pour garantir la stabilité numérique du modèle empirique, nousintroduirons une nouvelle méthode approchée hybride rapide et précise, la méthode des multi-niveaux,permettant d’inclure les effets topographiques par décomposition multi-niveaux du masque fin et discuteronsses avantages et ses limites. / At present, common resist models utilized in photolithography to correct for optical proximity effects(OPC) became complex and less physical in order to capture the maximum of optical and chemical effectsin shorter times. The question on the stability of such models, purely empirical, become topical. In thisthesis, we study the stability of existing OPC models by examining the origins of model instability towardsprocess parameters. Thus, we have developed a perturbative method in order to evaluate the stabilitycriterion. However, achieving stable and simple models needs a separation between optical and otherchemical effects. Besides, multiple approximations, widely utilized in the modeling of optical systemsoperating at high numerical aperture, lead to residual errors which can degrade OPC model accuracyand stability. Thus, we were interested to study the limits of validity of the Kirchhoff approximation,a method which, so far, is the most commonly used in mask near-field modeling. Other semi-rigorousmethods for mask topography effect modeling were also evaluated. These approximate methods canimprove the accuracy but degrades the run time. We then suggested different techniques to correct formask topography effects, while keeping the Kirchhoff approximation in the modeling of the optical part.Among them, we showed that errors due to mask topography effects can be partially captured by asecond empirical model. However, in order to ensure a good accuracy, it is necessary to increase themodel complexity by using more additional empirical terms. Finally, in order to achieve a numericalstability of the empirical model, we introduced a new hybrid fast and accurate method, the multi-levelmethod, which allows us to correct for mask topography effects through a multi-level decomposition ofthe thin mask and discussed its advantages and drawbacks.