71 |
Evaluation of EDF scheduling for Ericsson LTE system : A comparison between EDF, FIFO and RRNyberg, Angelica, Hartman, Jonas January 2016 (has links)
Scheduling is extremely important for modern real-time systems. It enables several programs to run in parallel and succeed with their tasks. Many systems today are real-time systems, which means that good scheduling is highly needed. This thesis aims to evaluate the real-time scheduling algorithm earliest deadline first, newly introduced into the Linux kernel, and compare it to the already existing real-time scheduling algorithms first in, first out and round robin in the context of firm tasks. By creating a test program that can create pthreads and set their scheduling characteristics, the performance of earliest deadline first can be evaluated and compared to the others. / Schemaläggning är extremt viktigt för dagens realtidssystem. Det tillåter att flera program körs parallellt samtidigt som deras processer inte misslyckas med sina uppgifter. Idag är många system realtidssystem, vilket innebär att det finns ett ytterst stort behov för en bra schemaläggningsalgoritm. Målet med det här examensarbetet är att utvärdera schema-läggningsalgoritmen earliest deadline first som nyligen introducerats i operativsystemet Linux. Målet är även att jämföra algoritmen med två andra schemaläggningsalgoritmer (first in, first out och round robin), vilka redan är väletablerade i Linux kärnan. Det här görs med avseende på processer klassificerade som firm. Genom att skapa ett program som kan skapa pthreads med önskvärda egenskaper kan prestandan av earliest deadline first algoritmen utvärderas, samt jämföras med de andra algoritmerna.
|
72 |
Contribución a la determinación y simulación de las vibraciones e impactos en operaciones de transporte y distribución de productos de consumo embaladosGarcía-Romeu Martínez, Manuel Alfredo 04 August 2008 (has links)
El trabajo se acoge a la modalidad de tesis por compendio de publicaciones del Departamento de Proyectos de Ingeniería de la Universidad Politécnica de Valencia. Consta de seis artículos, de los cuales, dos de ellos han sido publicados en la revista "Packaging Technology and Science", otros dos artículos publicados en "Advances in Experimental Mechanics Vols 7-8", un quinto artículo publicado en "World Congress on Engineering 2007, Vols 1 and 2" y un sexto artículo enviado y pendiente de ser aceptado en la revista "Packaging Technology and Science". El nexo común que los une es el de profundizar en la generación de nuevo conocimiento dentro del campo de la ingeniería del embalaje, siendo su objetivo final, el de mejorar las técnicas actuales de simulación de los riesgos transmitidos al producto y su embalaje en los procesos de transporte y distribución. Las investigaciones planteadas y detalladas en cada uno de los artículos pretenden aportar una contribución parcial a un objetivo tan ambicioso como el planteado. Uno de los abusos mecánicos importantes, aplicado al producto embalado durante el proceso de transporte y distribución, son los impactos o caídas a los que son sometidos los productos embalados. El primer artículo de investigación se ha centrado en la medida y análisis de estos impactos recibidos por productos embalados que son enviados por avión mediante empresas transportistas de paquetería (DHL y FedEx) entre Europa y USA, obteniendo datos necesarios para simular en laboratorio las condiciones intercontinentales del transporte de paquetería para el correcto diseño de los embalajes de protección.
La severidad de los impactos a menudo se describe en función de su altura de caída-libre equivalente (EDH) y de la orientación del impacto, para así facilitar los ensayos de caída en laboratorio. El enfoque generalmente utilizado es utilizar un paquete que contiene un registrador de aceleraciones y procesar los datos obtenidos para obtener una distribución estad / García-Romeu Martínez, MA. (2008). Contribución a la determinación y simulación de las vibraciones e impactos en operaciones de transporte y distribución de productos de consumo embalados [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/2927 / Palancia
|
73 |
Využití akustické emise při sledování hydraulických strojů / Monitoring of hydraulic machines using acoustic emissionsZávorka, Dalibor January 2017 (has links)
The goal of this diploma thesis is to clarify possibilities of usage of acoustic emission as a hydraulic machinery diagnostics tool. Especially for exposing presence of ruptures or cracks in the parts of machine, assuming changes in acoustic exposure of the part during operation. This clarification is based on series of simple measured experiments, which consist of monitoring the bolt placed in fluid stream inside of a pipe. This bolt was preloaded against inner wall of pipe by appropriate tightening torque. This preload is supposed to simulate effects of the size of rupture. High preload simulates small rupture or none in object and respectively small preload is supposed to simulate big rupture. A group of pressure sensors and accelerometers measures experiments and their evaluations are processed by script created in software MATLAB. Outputs of this script are charts with effective values of respective sensors from the entire record split into individual frequency spectrums. These charts compare spectrums of each configuration to judge effects of parameters changes.
|
74 |
Metody rozptylu světla a kalorimetrie ve studiu systémů hyaluronan-albumin / Study of hyaluronan-albumin systems using light scattering methods and calorimetrySereda, Alena January 2016 (has links)
This thesis, which is a continuation of the previous Bachelor thesis, is dedicated to the study of polyelectrolyte complexes between hyaluronan (HA) and bovine serum albumin (BSA). Interactions between HA and BSA and a formation of complexes were studied by SEC-MALLS method, where a molar mass, a root mean square (rms) radius, a hydronamic radius and an intrinsic viscosity of particles of the system were defined. Furthermore the interactions were studied by calorimetric measurement ITC, where thermodynamic character of complex formation was determined. Additionally, dynamic and electrophoretic light scattering methods (DLS and ELS) were applied, where hydrodynamic radius and a value of the zeta potential were defined. Also the effect of higher temperature on the character and complex formation was examined by SEC-MALLS and ITC measurements. The interactions were confirmed at any of the used media, but with different efficiency. It was also proved that complexes become smaller in their radii and viscosity with growing BSA concentration. Furthermore it was proved, that the high ionic strength hinders surface charges of HA and BSA molecules and minimizes their mutual interactions. At the higher ionic strength the radii of the complexes, their intrinsic viscosity and zeta potential are increased. The higher temperature has only minimal effect on the formation of the complexes.
|
75 |
Detection of Emerging Stability Phenomena in the Future Swedish Power System : Comparing RMS-Based and Waveform-Based Detection Techniques for Power Systems Dominated by Power ElectronicsLarsson, Ellen, Carlsson, Carl January 2024 (has links)
Society is going through a change to be more sustainable, and one big step in that process is to convert the power grid from convectional power generation to increased part of renewable energy sources. Renewable energy sources often require power electronics such as converters to connect to the power grid, and power electronics can cause interference in the grid. This development in Sweden and rest of the Nordic countries is driven by the large increase of load based on power electronics. To maintain a stable power grid, it is essential to detect disturbances through measurement techniques adapted to the challenges that may arise. The measurement techniques in the Swedish power grid have historically been based on power quality meters and RMS-based measurements, and this thesis focuses on the disturbances that RMS-based measurements may fail to detect. The objective is to compare the RMS-based measurements techniques available in the power grid with waveform measurement techniques developed to see how they could detect disturbances in the power grid. The first research question pertains to the characteristic frequency bandwidths within which a power system typically operates, and what frequency bandwidths a system could have with a significant amount of power electronics installed. The second research question concerns the measurement techniques. This work consists of four main parts: bandwidth analysis of control systems for voltage source converter, RMS vs waveform detection techniques, interaction between converter and voltage perturbation, and realistic phenomena studies. The bandwidth analysis aims to determine the frequency range expected in future power systems, which in turn informs the minimum detection capabilities required for measurement techniques. This was achieved through calculations involving the control loops of converters, including the inner current control loop, outer control loop, and phase locked loop. Bode diagrams were generated for each control loop, with variables manipulated, and the short circuit ratio adjusted to determine the bandwidth of the control loop. The RMS vs waveform detection techniques phase was central to the study, involving simulations imitating various phenomena that could occur in the power grid. This was accomplished using two ideal sources and examining their interactions. The simulations included frequency perturbations, amplitude perturbations, and added oscillations apparent at sub-synchronous, super-synchronous, and high super-synchronous frequencies. Simulation results were presented for both RMS and waveform based defection techniques, simulating different reporting rates to mimic real measurement tools. The third and fourth parts involved validating the RMS vs waveform detection techniques results using real-case simulations. An HVDC model was employed to simulate the effects of voltage perturbation and observe the coupling over frequency mechanism. The same HVDC model was also used to simulate phenomena occurring in weak grids. Additionally, a wind park model was utilized to simulate the induction generator effect phenomena. The findings reveal that the bandwidth of a power system undergoes significant expansion as the proportion of power electronics increases in the grid. Specifically, analysis of converter indicates a shift from under 50 Hz to several kHz in systems dominated by synchronous generators versus those dominated by power electronics. To effectively detect higher frequency oscillations within the grid, waveform measurement tools become essential, as classical RMS measurement tools are inadequate for capturing oscillations originating from power electronics. As power systems evolve towards dominance by power electronics, it becomes imperative to develop measurement systems capable of accurately detecting high frequency oscillations. The recommendation of this thesis is to invest in waveform measurement tools alongside the already existing RMS-based ones to enhance the detection of disturbances, particularly those with super synchronous frequencies, addressing future power grid challenges.
|
76 |
Study On DC-Link Capacitor Current In A Three-Level Neutral-Point Clamped InverterGopalakrishnan, K S 07 1900 (has links) (PDF)
Three-level diode-clamped inverter is being widely used these days. Extensive research has been carried out on pulse width modulation (PWM) strategies for a three-level inverter. The most widely used PWM strategies are sine-triangle pulse width modulation (SPWM) and centered space vector pulse width modulation (CSVPWM). The influence of these PWM strategies on the DC-link capacitor current and voltage ripple is studied in this thesis.
The sizing of the DC capacitor depends on value of the maximum RMS current flowing through it. In this work, an analytical expression for capacitor RMS current is derived as a function of operating conditions like modulation index, power factor angle of the load and peak load current. The worst case current stress on the capacitor is evaluated using the analytical expression. The capacitor RMS current is found to be the same in SPWM and CSVPWM schemes. The analytical expression is validated through simulations and experiments on a 3kVA MOSFET based three-level inverter.
Harmonic analysis of the capacitor current is helpful in better evaluation of capacitor power loss. Therefore, harmonic analysis of the capacitor current is carried out, using the techniques of geometric wall model and double Fourier integral for SPWM and CSVPWM schemes. The theoretical predictions are validated through experiments.
The capacitor RMS current is divided into low-frequency RMS current (where low frequency component is defined as a component whose frequency is less than half the switching frequency) and high-frequency RMS current. The capacitor voltage ripple is estimated analytically for SPWM and CSVPWM schemes, using the low-frequency and high-frequency capacitor RMS current. The voltage ripples due to SPWM and CSVPWM schemes are compared. It is found that the voltage ripple with SPWM is higher than that with CSVPWM. A simplified method to estimate the capacitor power loss, without the requirement of FFT analysis of capacitor current, is proposed. The results from this simplified method agree reasonably well with the results from the detailed method.
A space vector based modulation scheme is proposed, which reduces the capacitor RMS current at high power factor angles. However, the proposed method leads to higher total harmonic distortion (THD) than CSVPWM. Simulation and experimental results, comparing CSVPWM and the proposed PWM, are presented.
|
77 |
Měřič odstupu signálu od šumu obrazových signálů / BER Meter for Video SignalsŠimoník, Petr January 2008 (has links)
The diplomma thesis is dealing with possibilities of Signal to noise ratio measurement by method, which is based on direct measurement. It is chosen the most suitable method – signal and noise separation to two different parallel signal branches, where is measured signal strength in one branch and root mean square value in the other. The thesis is consisted of a concept of detail block scheme of Signal to noise ratio meter, which was designed in terms of theoretical knowledge. Particular functional blocks were circuit-designed, the active and passive parts were chosen and their function were described. There were made simulation and displayed input and output time flows. There is designed the whole connection of engineered Signal to noise ratio meter in the last part of my thesis. The double-sided board of printed circuit is contained too. It was created simple programme for supervisor micro-processor. Thereby were constructed complete bases for realization.
|
78 |
Macroscopic and Microscopic surface features of Hydrogenated silicon thin filmsPepenene, Refuoe Donald January 2018 (has links)
Magister Scientiae - MSc (Physics) / An increasing energy demand and growing environmental concerns regarding the use of fossil
fuels in South Africa has led to the challenge to explore cheap, alternative sources of energy.
The generation of electricity from Photovoltaic (PV) devices such as solar cells is currently
seen as a viable alternative source of clean energy. As such, crystalline, amorphous and
nanocrystalline silicon thin films are expected to play increasingly important roles as
economically viable materials for PV development. Despite the growing interest shown in these
materials, challenges such as the partial understanding of standardized measurement protocols,
and the relationship between the structure and optoelectronic properties still need to be
overcome.
|
79 |
Extrakce a modifikace vlastností číslicových zvukových signálů v dynamické rovině / Digital Audio Signal Feature Extraction and Modification in Dynamic PlaneKramoliš, Ondřej January 2010 (has links)
This thesis deals with basic methods of root mean square and peak value measurement of a digital acoustic signal, algotithms to measure audio programme loudness and true-peak audio level according to recommendation ITU-R BS.1770-1 and digital systems for control of signal dynamic range. It shows achieved results of root mean square and peak value measurement and results of implementation of dynamic processor with general piecewise linear non-decreasing static curve and algorithms according to recommendation ITU-R BS.1770-1.
|
80 |
Odolnost spotřebičů na krátkodobé poklesy a výpadky napětí / The Appliances Immunity to Short Voltage Dips and InterruptionsBok, Jaromír January 2011 (has links)
This Ph.D. thesis deals with problems about voltage dips and short voltage interruptions, generally named as voltage events, which origin in power supply networks and have a negative influence for all connected electric appliances. In this thesis single phase appliances are considered. These problems closely relate with area of electromagnetic compatibility which solve all questions about correct operation of different types of electric appliances during electromagnetic disturbances impact. Voltage events are ones of the many types of electromagnetic disturbances. The connection between disturbance sources and sensitive electric appliances is created by power supply lines. The immunity of electric appliances to voltage dips and short interruptions is currently tested via voltage dips with strictly defined parameters which are intended by class of electromagnetic environment in which the usage of electric appliance is recommended. During immunity tests the rectangular shape of voltage dips is preferred. The main descriptive parameters of testing voltage events are the residual voltage and the event time duration. But voltage dips and short interruptions defined by this way do not closely relate with parameters of real voltage dips and interruptions occurred in public supply system where parameters of voltage dips are variable. Moreover in the power supply system there are many of others voltage parameters which can have a significant influence to immunity level of connected electric appliances. This Ph.D. thesis also deals with finding more voltage event parameters. Although the voltage events occurrence in the power supply system is not limited and voltage events are considered only as informative voltage parameter it is important to monitor voltage events occurrence. The monitoring device has to be able to operate for ling time period and it has to detect parameters of voltage events with adequate accuracy. The accuracy of detected event parameters and the detection delay depends on the detection algorithm characteristics. That is why the part of this thesis relates with a comparison of several detection algorithms and their abilities to correct detection of voltage event parameters. The main purpose of this thesis is the proposal of connection between classification of voltage dips and short interruptions occurred in power supply system with the classification of electric appliances immunity to these voltage events. On the base of many of provided electric appliances immunity tests and also on the base of long time period voltage events monitoring the special compatibility levels are proposed in this thesis. The observation of proposed compatibility levels will bring the increasing level of reliable operation of all connected electric appliances.
|
Page generated in 5.4645 seconds