Wireless communications have been an indispensable aspect of everyday life, and there is an increasing consumer demand for accessing several wireless communication technologies from a single, compact, mobile device. System-on-package (SOP) technology is an advanced packaging technology that has been proven to realize the convergence of multiple functions into miniaturized, high-performance systems to meet this demand. With the advancements in the SOP technology, the miniaturization of the front-end module has been achieved using embedded passives in multilayer packages. However, the integration of the antenna directly on the module package is still the barrier to achieve a fully-integrated, high-performance RF SOP system. The main reason for this missing link is that integrating the antenna on the package requires miniaturizing the antenna, which is a difficult task. The focus of this dissertation is to design high-performance antennas along with developing techniques for miniaturization and system-on-package (SOP) integration of these antennas to achieve fully-integrated SOP systems using advanced multilayer organic substrates and thin-film magneto-dielectric materials. The targeted spectrum for the antenna designs are 2.4/5 GHz WLAN/WiMAX and 60 GHz WPAN bands. Several novel antenna designs and configurations to integrate the antenna on the package along with the module are discussed in this dissertation. The advanced polymers used in this research are Liquid Crystalline Polymer (LCP), RXP, and thin-film magneto-dielectrics.

Today, owners of small communicating device are interested in transmitting or receiving various multimedia data. By increasing the number of antennas at the transmitter and/or the receiver side of the wireless link, the diversity/Multiple-Input Multiple-Output (MIMO) techniques can increase wireless channel capacity without the need for additional power or spectrum in rich scattering environments. However, due to the limited space of small mobile devices, the correlation coefficients between MIMO antenna elements are very high and the total efficiencies of MIMO elements degrade severely. Furthermore, the human body causes high losses on electromagnetic wave. During the applications, the presence of users may result in the significant reduction of the antenna total efficiencies and highly affects the correlations of MIMO antenna systems. The aims of this thesis are to investigate and enhance the MIMO/diversity performance of multiple antenna systems in the free space and the presence of users. The background and theory of multiple antenna systems are introduced briefly first. Several figures of merits are provided and discussed to evaluate the multiple antenna systems. The decoupling techniques are investigated in the multiple antenna systems operating at the higher frequencies (above 1.7 GHz) and with high radiation efficiency. The single, dual and wide band isolation enhancements are realized through the half-wavelength decoupling slot, quarter-wavelength decoupling slot with T-shaped impedance transformer, tree-like parasitic element with multiple resonances, as well as the different polarizations and radiation patterns of multiple antennas. In the lower bands (lower than 960 MHz), due to the low radiation efficiency and strong chassis mode, the work mainly focused on how to directly reduce the correlations and enlarge the total efficiency. A new mode of mutual scattering mode is introduced. By increasing the Q factors, the radiation patterns of multiple antennas are separated automatically to reduce the correlations. With the inter-element distance larger than a certain distance, a higher Q factor also improved the total efficiency apart from the low correlation. A wideband LTE MIMO antenna with multiple resonances is proposed in mobile terminals. The high Q factors required for the low correlation and high efficiencies in mutual scattering mode is reduced with another mode of diagonal antenna-chassis mode. Hence, the bandwidth of wideband LTE MIMO antenna with multiple resonances mentioned above can be further enlarged while maintaining the good MIMO/diversity performance. The user effects are studied in different MIMO antenna types, chassis lengths, frequencies, port phases and operating modes. Utilizing these usefully information, an adaptive quad-element MAS has been proposed to reduce the user effects and the some geranial rules not limited to the designed MAS have also been given. / <p>QC 20130121</p> / EU Erasmus Mundus External Cooperation Window TANDEM

Receiver systems utilising planar technologies are prevalent in telescopes observing at radio to sub-millimetre wavelengths. Receiver components using planar technologies are generally smaller, have reduced mass and are cheaper to manufacture than waveguide-based alternatives. Given that modern-day detectors are capable of reaching the fundamental photon noise limit, increases in the sensitivity of telescopes are frequently attained by increasing the total number of detectors in the receivers. The development of components utilising planar technologies facilitates the demand for large numbers of detectors, whilst minimising the size, mass and manufacturing cost of the receiver. After a review and study of existing concepts in radio to sub-mm telescopes and their receivers, this thesis develops planar components that couple the radiation from the telescope's optics onto the focal plane. Two components are developed; a W- band (75-110 GHz) planar antenna-coupled flat mesh lens designed for the receiver of a Cosmic Microwave Background (CMB) B-mode experiment, and an L-band (1- 2 GHz) horn-coupled planar orthomode transducer designed for the receiver of the FAST telescope. The first developments of a planar antenna-coupled flat mesh lens are presented. The design is driven by the requirement to mitigate beam systematics to prevent pollution of the CMB B-mode signal. In the first instance, a waveguide-coupled mesh lens is characterised. The radiation patterns of the waveguide-coupled mesh lens have -3 dB beam widths between 26 and 19 degrees, beam ellipticity &lt;10%, and cross-polarisation.

Abstract This dissertation presents wideband and multi-element antennas for mobile applications. It is divided into the following main parts: modal theory, wideband antennas, multi-element antennas, and wideband multi-element antennas. The radiating fields are first studied in terms of spherical scalar and vector modes, and it is shown how these modes correlate with the characteristic current modes on a planar mobile ground plane. The theory part shows how it is possible to excite the same modes on a conventional sphere and a rectangular planar mobile ground plane. The theory refers to the novel wideband antenna structures presented in this dissertation, in terms of current and radiating modes. After studying the modes, the dissertation shows how to excite a radiating antenna mode within a wide frequency bandwidth. To gain this, two main approaches are taken. First, a quasi-complementary antenna (QCA) structure with an electric conductor and magnetic slot is presented, and its characteristics are studied. A QCA UWB antenna, and a QCA element excited with a monopole or a dipole, is presented. The QCA structure compensates for the imaginary part of the input impedance on wide frequency bandwidth, when, at the same time, the fundamental mode is excited to ensure good radiating properties. The second approach uses a symmetrical feeding with two antenna elements to gain a wide frequency bandwidth, the relative -6 dB impedance bandwidth between 37.5–80%. When a field is symmetrically coupled to the conducting ground plane, the excitation avoids the awakening of higher order modes which might disturb the performance of the antenna. It is also shown, by using multiple feeding elements, that the excitation of orthogonal higher order modes on a small radiating ground plane is possible. As the modes are orthogonal to each other, they present a very low correlation. By using this kind of approach, radiation pattern diversity can be obtained in mobile applications within a small volume. On the other hand, when combining two QCA elements to a one multi-element antenna structure, a wideband diversity antenna with an 87.5% relative -6 dB impedance bandwidth, and a wideband MIMO antenna with a 95.0% relative -6 dB impedance bandwidth, are presented with excellent radiation and correlation properties. Also mutual coupling is need to be counted when multi-element antennas are designed. When designing an efficient radiator, it is important to consider an antenna feeding in terms of wideband impedance matching and wideband baluns, not to spoil the antenna performance. The efficient antenna structures and feeding mechanisms are obtained by using commercial 3D electromagnetic simulators to find the desired wideband antenna characteristics. Prototype antennas are measured in most of the presented structures to show their functionality in real. In general, the dissertation presents wideband antenna structures with radiating antenna modes excited on a planar conducting ground plane. The idea is to find structures and feeding mechanisms to excite the fundamental mode, or a certain radiating antenna mode, at a wide frequency bandwidth, by avoiding the excitation of higher order modes which might disturb the antenna performance. It is also shown that, by using multiple feeding elements, it is possible to excite higher order modes on a small antenna. / Tiivistelmä Väitöskirjassa esitetään uusia laajakaistaisia ja monielementtiantenneja matkaviestimiin. Väitöskirja koostuu neljästä pääalueesta: pintavirtojen muototeoria, laajakaistaiset antennit, monielementtiantennit sekä laajakaistaiset monielementtiantennit. Teoriaosassa säteilykenttiä on aluksi tutkittu pallon pinnalla sekä skalaaripotentiaaleina että pintavirtavektoreina, jonka jälkeen niitä on verrattu mobiilin laitteen maatason ominaispintavirtojen synnyttämiin säteilykenttiin. Teoriaosassa osoitetaan, että pallon pinnalla sekä tasomaisella suorakaiteen muotoisella pinnalla on mahdollista herättää samat säteilykentät. Myöhemmin väitöskirjassa esitettävien uudenlaisten antennirakenteiden ominaisuuksia verrataan teoriaosassa esitettyihin pintavirtoihin ja säteilykenttiin. Teoriaosuuden jälkeen osoitetaan miten säteilevä sähkömagneettinen kenttä saadaan herätettyä laajalla taajuusalueella. Tähän on otettu kaksi eri lähestymistapaa, joista ensimmäisessä esitellään ja tutkitaan kvasikomplementaarista antennirakennetta (QCA). Kvasikomplementaarisessa antennirakenteessa sisääntuloimpedanssin imaginaariosa kompensoidaan yhdistämällä sähköinen johde ja magneettinen rako samaan antenniin. Samanaikaisesti perusmuoto herätetään laajalla taajuusalueella, jolla varmistetaan antennin hyvät säteilyominaisuudet koko toimintataajuusalueella. Toisessa lähestymistavassa käytetään kahta symmetrisesti asetettua antennielementtiä, joita syötetään symmetrisesti samalla amplitudilla ja vaiheella. Kun sähkömagneettinen kenttä herätetään symmetrisesti, korkeamman kertaluvun muotojen herättäminen voidaan välttää laajalla taajuusalueella. Symmetrisesti syötetyillä antennirakenteilla saavutettu -6&#160;dB suhteellinen impedanssikaistanleveys on 37.5–80&#160;%. Useita syöttöelementtejä käytettäessä voidaan mobiilin laitteen maatasossa herättää yhdellä pistetaajuudella monta toisistaan riippumatonta säteilykenttää. Koska herätetyt kentät ovat toisistaan riippumattomia, on niiden välinen korrelaatio myös pieni. Kyseisellä rakenteella on mahdollista toteuttaa säteilykuviodiversiteetti erittäin pienessä tilassa, kuten matkapuhelimessa. Toisaalta, kun yhdistetään kaksi QCA-elementtiä yhdeksi monielementtiratkaisuksi, voidaan toteuttaa laajakaistainen diversiteettiantenni, jonka suhteellinen -6&#160;dB impedanssikaistanleveys on 87.5&#160;%. Vastaavasti kahdella laajakaistaisella QCA-elementillä toteutetulla MIMO-ratkaisulla päästään 95&#160;% suhteelliseen -6&#160;dB impedanssikaistanleveyteen. Molemmilla ratkaisuilla on erittäin hyvät säteilyominaisuudet sekä alhainen korrelaatio ja pieni keskinäiskytkentä antennielementtien välillä. Suunniteltaessa toimivaa laajakaistaista antennirakennetta, on tärkeää ottaa huomioon antennisyötön impedanssisovitus, jotta antennin suorituskyky ei heikkenisi. Lisäksi balansoidussa rakenteissa tulee olla laajakaistainen baluni, jolla vältetään säteilykuvion vääristyminen. Väitöskirjan syöttöratkaisuissa on käytetty kaupallisia sähkömagneettisia simulaattoreita, joilla antennirakenne voidaan mallintaa kolmiulotteisesti, ja joilla laajakaistainen syöttö saadaan optimoitua haluttuun antenniin. Suurin osa esitellyistä antennirakenteista on simulointien lisäksi myös mitattu, jolloin niiden toimivuus käytännössä pystytään todentamaan rakentamalla prototyyppiantenni. Yleisesti väitöskirjassa esitellään tasomaisia antenniratkaisuja johtavassa maatasossa, joissa säteilevät pintavirrat herätetään mahdollisimman laajalla taajuusalueella. Ideana on löytää laajakaistaisia antenni- ja syöttörakenteita, joilla saadaan herätettyä perusmuoto tai jokin muu haluttu muoto. Ajatuksena on välttää korkeamman kertaluvun muotojen herättäminen, jotka voivat pilata antennin suorituskyvyn. Väitöskirjassa osoitetaan myös, että pienikokoisella antennilla on mahdollista herättää korkeamman kertaluvun muotoja pistetaajuudella käyttämällä useita heräte-elementtejä.

This work familiarizes readers with the issues of slot antennas. It presents design and simulation of slot antenna for X band in CST Microwave Studio program. The simulation procedure is described here, including all the settings required for proper operation of the simulation. Then there is the description of the principle of the Half-Mode Substrate Integrated Waveguide - HMSIW. In the end the designed structure of HMSIW and the slot antenna are assembled and measured. The results of the simulation are compared with the results acquired by measurements. The designed antenna at the frequency 10 GHz achieves the impedance bandwidth 255 MHz, and the gain 8,81 dBi (the simulated values in CST Microwave studio).

The Master´s thesis deals with the theoretical design, practical numerical analyses and optimalization of disc-like antenna and disc-like slot antenna. The antennas have relative omnidirectional radiation characteristics in the horizontal plane, respectively in the vertical plane. Antennas exploit the substrate integrated waveguide technology. The antennas themselves are designed for the purpose of making the antenna array that will be work as an antenna unit for access point. The antennas are manufactured and experimentally verified. The program CST Microwave Studio is used for simulation in the thesis.

This master's thesis deals with the basic principles of slot antennas. Models of antennas were simulated in a selected electromagnetic simulator CST MICROWAVE STUDIO (CST MWS). There are several models of slot antennas which are optimized for communication in the car at a frequency 8 GHz.

Yes / A feasibility study of a novel configuration for a super-wide impedance planar antenna is presented based on a 2 × 2 microstrip patch antenna (MPA) using CST Microwave Studio. The antenna comprises a symmetrical arrangement of four-square patches that are interconnected to each other with cross-shaped high impedance microstrip lines. The antenna array is excited through a single feedline connected to one of the patches. The proposed antenna array configuration overcomes the main drawback of conventional MPA with a narrow bandwidth that is typically <5%. The antenna exhibits a super-wide frequency bandwidth from 20 GHz to 120 GHz for S11 < −15 dB, which corresponds to a fractional bandwidth of 142.85%. The antenna’s performance of bandwidth, impedance match, and radiation gain were enhanced by etching slots on the patches. With the inclusion of the slot, the maximum radiation gain and efficiency of the MPA increased to 15.11 dBi and 85.79% at 80 GHz, which showed an improvement of 2.58 dBi and 12.54%, respectively. The dimension of each patch antenna was 4.3 × 5.3 mm2 . The results showed that the proposed MPA is useful for various existing and emerging communication systems such as ultra-wideband (UWB) communications, RFID systems, massive multiple-output multiple-input (MIMO) for 5G, and radar systems. / This work was partially supported by the Innovation Program under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.

This work deals with the most famous constructions of planar antennas. The work analyses selected methods of connecting planar antennas' charging with the possibility of impedance adaptation. An important part of the work consists of description of techniques for increasing bandwidth and conversely techniques for reducing the dimensions which are important for the design of planar antennas for mobile devices. The antennas were designed by means of theoretical basis and their properties were examined in the electromagnetic field simulator. The selected antenna model was constructed and its parameters were measured experimentally. The matching circuit for the antenna to tune it to different resonant frequencies was designed and constructed.

Disertační práce se zabývá návrhem a optimalizací kruhově polarizované anténa pro oblast terahertzových kmitočtů. V práci se věnuji zjednodušené teorii terahertzového zdroje a návrhu vhodné antény pro tento zdroj. Návrh je zaměřen na dosažení kruhové polarizace z lineárně polarizovaných antén. Abych potlačil šíření povrchové vlny na elektricky tlustém dielektrickém substrátu, věnuji se návrhu a optimalizaci specifických periodických struktur. Návrh těchto struktur je poměrně komplikovaný, protože neexistuje přímočarý vztah mezi vlastnostmi struktur s elektromagnetickým zádržným pásmem (EBG) a geometrií buňky. Abych vhodně koncentroval vyzařovanou energii do úzkého svazku, věnuji se návrhu a optimalizaci částečně odrazného plochy (PRS), které působí jako planární čočka pro terahertzovou anténu.