The aim of presented diploma thesis was to determination of authenticity of fruit baby foods for early infant feeding using molecular methods. In the experimental part, isolation kit was used for isolation of plant DNA from fruits (strawberry, apricot, raspberry, apple) and from six commercial fruit products for children. Isolated DNA was characterized and verified using PCR methods with primers specific for plant rDNA (ITS2). Specific primer pairs were designed to amplify DNA for the detection of one fruit species. Primer specificity was assessed with four fruit species. A mixture of fruit puree from the two fruits was used to determine the sensitivity of the multiplex PCR assay. Six commercial fruit products were evaluated to verify the applicability of the multiplex PCR assay. The methodology of molecular detection of fruit DNA by qPCR and multiplex qPCR (duplex) includes approaches, which enable to detect two fruits (strawberry-raspberry, apricot-apple) in one reaction and thus reduces time and money requirements.

[pt] O presente trabalho inicia com uma investigação sobre o uso de modelos de Aprendizado Profundo 3D para a detecção aprimorada de morangos em túneis de cultivo. Focou-se em duas tarefas principais: primeiramente, a detecção de frutas, comparando o modelo original MaskRCNN com uma versão adaptada que integra informações de profundidade (MaskRCNN-D). Ambos os modelos são capazes de classificar morangos baseados em sua maturidade (maduro, não maduro) e estado de saúde (afetados por doença ou fungo). Em segundo lugar, focou-se em identificar a região mais ampla dos morangos, cumprindo um requisito para um sistema de espectrômetro capaz de medir o conteúdo de açúcar das frutas. Nesta tarefa, comparouse um algoritmo baseado em contorno com uma versão aprimorada do modelo VGG-16. Os resultados demonstram que a integração de dados de profundidade no MaskRCNN-D resulta em até 13.7 por cento de melhoria no mAP através de diversos conjuntos de teste de morangos, incluindo os simulados, enfatizando a eficácia do modelo em cenários agrícolas reais e simulados. Além disso, nossa abordagem de solução ponta-a-ponta, que combina a detecção de frutas (MaskRCNN-D) e os modelos de identificação da região mais ampla (VGG-16 aprimorado), mostra um erro de localização notavelmente baixo, alcançando até 11.3 pixels de RMSE em uma imagem de morango cortada de 224 × 224. Finalmente, explorou-se o desafio de aprimorar a qualidade das leituras de dados do espectrômetro através do posicionamento automático do sensor. Para tal, projetou-se e treinou-se um modelo de Aprendizado Profundo com dados simulados, capaz de prever a acurácia do sensor com base em uma imagem dada de um morango e o deslocamento desejado da posição do sensor. Usando este modelo, calcula-se o gradiente da saída de acurácia em relação à entrada de deslocamento. Isso resulta em um vetor indicando a direção e magnitude com que o sensor deve ser movido para melhorar a acurácia do sinal do sensor. Propôs-se então uma solução de Servo Visão baseada neste vetor, obtendo um aumento significativo na acurácia média do sensor e melhoria na consistência em novas iterações simuladas. / [en] The present work begins with an investigation into the use of 3D Deep Learning models for enhanced strawberry detection in polytunnels. We focus on two main tasks: firstly, fruit detection, comparing the standard MaskRCNN with an adapted version that integrates depth information (MaskRCNN-D). Both models are capable of classifying strawberries based on their maturity (ripe, unripe) and health status (affected by disease or fungus). Secondly, we focus on identifying the widest region of strawberries, fulfilling a requirement for a spectrometer system capable of measuring their sugar content. In this task, we compare a contour-based algorithm with an enhanced version of the VGG-16 model. Our findings demonstrate that integrating depth data into the MaskRCNN-D results in up to a 13.7 percent improvement in mAP across various strawberry test sets, including simulated ones, emphasizing the model s effectiveness in both real-world and simulated agricultural scenarios. Furthermore, our end-to-end pipeline approach, which combines the fruit detection (MaskRCNN-D) and widest region identification models (enhanced VGG-16), shows a remarkably low localization error, achieving down to 11.3 pixels of RMSE in a 224 × 224 strawberry cropped image. Finally, we explore the challenge of enhancing the quality of the data readings from the spectrometer through automatic sensor positioning. To this end, we designed and trained a Deep Learning model with simulated data, capable of predicting the sensor accuracy based on a given image of the strawberry and the subsequent displacement of the sensor s position. Using this model, we calculate the gradient of the accuracy output with respect to the displacement input. This results in a vector indicating the direction and magnitude with which the sensor should be moved to improve the sensor signal accuracy. A Visual Servoing solution based on this vector provided a significant increase in the average sensor accuracy and improvement in consistency across new simulated iterations.

Total soluble solids (TSS) is a reliable indicator of melon eating quality, with a minimum standard of 10% recommended. The state of Australian melon production with respect to this quality criterion was considered within seasons, between growing districts and over seasons. It was concluded that improvement in agronomic practice and varietal selection is required to produce sweeter melons. The scientific literature addressing melon physiology and agronomy was summarised, as a background to the work that is required to improve melon production practices in Australia. The effect of source sink manipulation was assessed for commercially grown and glasshouse grown melon plants. The timing of fruit thinning, pollination scheduling, the application of a growth inhibitor and source biomass removal were assessed in relation to fruit growth and sugar accumulation. Results are interpreted against a model in which fruit rapidly increase in weight until about two weeks before harvest, with sugar accumulation continuing as fruit growth ceases. Thus treatment response is very dependant on timing of application. For example, fruit thinning at 25 days before harvest resulted in further fruit set and increased fruit weight but did not impact on fruit TSS (at 9.8%, control 9.3%), while thinning at 5 days before harvest resulted in a significant (Pless than 0.05) increase in fruit TSS (to 10.8%, control 9.3%) and no increase in fruit weight or number. A cost/ benefit analysis is presented, allowing an estimation of the increase in sale price required to sustain the implementation of fruit thinning. The effect of irrigation scheduling was also considered with respect to increasing melon yield and quality. To date, recommended practice has been to cause an irrigation deficit close to fruit harvest, with the intent of 'drying out' or 'stressing' the plant, to 'bring on' maturity and increase sugar accumulation. Irrigation trials showed that keeping plants stress-free close to harvest and during harvest, facilitated the production of sweeter fruit. The maintenance of a TSS grade standard using either batch based (destructive) sampling or (non-invasive) grading of individual fruit is discussed. On-line grading of individual fruit is possible using near infrared spectroscopy (NIR), but the applicability of the technique to melons has received little published attention. Tissue sampling strategy was optimised, in relation to the optical geometry used (in commercial operation in Australia), both in terms of the diameter and depth of sampled tissue. NIR calibration model performance was superior when based on the TSS of outer, rather than inner mesocarp tissue. However the linear relationship between outer and middle tissue TSS was strong (r2 = 0.8) in immature fruit, though less related in maturing fruit (r2 = 0.5). The effect of fruit storage (maturation/senescence) on calibration model performance was assessed. There was a negligible effect of fruit cold storage on calibration performance. Currently, the agronomist lacks a cost-effective tool to rapidly assess fruit TSS in the field. Design parameters for such a tool were established, and several optical front ends compared for rapid, though invasive, analysis. Further, for visualisation of the spatial distribution of tissue TSS within a melon fruit, a two-dimensional, or hyper-spectral NIR imaging system based on a low cost 8-bit charge coupled device (CCD) camera and filter arrangement, was designed and characterised.

Furniture history is often considered a niche subject removed from the main discipline of art history, and one that has little to do with the output of painters, sculptors and architects. This thesis, however, connects the key intellectual, artistic and architectural debates surfacing in 'the arts' between 1740 and 1840 with the design of British furniture. Despite the expanding corpus of scholarly monographs and articles dealing with individual cabinet-makers, furniture making in geographic areas and periods of time, little attention has been paid to exploring Gothic furniture made between 1740 and 1840. Indeed, no body of research on 'mainstream' Gothic furniture made at this time has been published. No sustained attempt has been made to trace its stylistic evolution, establish stylistic phases, or to place this development within the context of contemporary architectural practice and historiography — except for the study of A.W.N. Pugin's 'Reformed Gothic'. Neither have furniture historians been willing to explore the aesthetic's connection with the intellectual and sentimental position of 'the Gothic' in the period. This thesis addresses these shortcomings and is the first to bridge the historiographic, cultural and architectural concerns of the time with the stylistic, constructional and material characteristics of Gothic furniture. It argues that it, like architecture, was charged with social and political meanings that included national identity in the eighteenth century — around a century before Charles Barry and A.W.N. Pugin designed the Palace of Westminster and prominently associated the Gothic legacy with Britishness.

No description available.

No description available.

Tesis por compendio / [EN] Chitosan films and coatings have been obtained, by incorporating different essential oils (EO) and using different homogenization conditions of the film forming emulsions, in order to obtain antifungal materials for fruit preservation. The effect of oleic acid (OA) on the stability of the initial emulsions and on the film properties was analysed. Coatings were applied to control fungal decay in strawberries. The blending of chitosan with methylcellulose (MC) was also used in coating applications to tomato plants and fruits to prevent fungal infections. The films' functional properties as a function of their composition were analysed, as well as their antimicrobial activity through in vitro and in vivo tests. OA incorporation in the chitosan films (1:1 wt. ratio) reduced water vapour permeability (WVP) values to about 50 % of those of net chitosan films, with a small positive effect of the microfluidization process. EO (cinnamon, thyme and basil) did not notably reduced the WVP values of the chitosan films but a significant improvement in water barrier capacity was induced when OA was also added at 1:1 or 1:0.5 CH:OA ratios. In contrast, lipids slightly promoted oxygen permeability of the films. Lipid addition decreased the film stretchability and stiffness, with a lesser impact on the resistance to break, slightly depending on the droplet sizes. Essential oils also modulated the mechanical behaviour of the films, depending on their composition. Thyme and basil EO greatly promoted film stiffness and resistance to break, whereas cinnamon oil slightly reduced these mechanical attributes. Optical properties of the chitosan films were also affected by lipid incorporation. OA reduced the film transparency and gloss depending on the concentration, but provoked small changes in the colour parameters and whiteness index. EO affected transparency to a lesser extent, but had greater impact on the colour coordinates and whiteness index of the chitosan films due to the selective light absorption of their compounds. EO blend with oleic acid mitigated the colour changes in the films. Likewise, blending of OA with EO significantly reduced the losses of volatiles during the film formation due to the promotion of the stability of the film forming emulsions. Films containing cinnamon EO were effective in reducing the growth of Aspergillus niger, Botrytis cinerea and Rhizopus stolonifer, although thyme and basil EO encapsulated in the films did not exhibit antifungal action against these three fungi. When chitosan-cinnamon EO coatings were applied to strawberries inoculated with R. stolonifer, they reduced the fungal decay of the fruits during 14 days, at 10 °C, at the same time that total coliform counts were maintained at the initial levels. Chitosan coatings with lemon essential oil were also active at controlling fungal decay in strawberries. These did not significantly affect the physicochemical parameters of strawberries throughout cold storage, while they slowed down the respiration rate of the fruits and enhanced the chitosan antifungal activity against B. cinerea. The coatings, with and without lemon EO, affected the strawberry volatile profile, although it was only sensory appreciated for samples coated with chitosan-lemon oil. Blend films of CH and MC (1:1) containing oregano EO caused phytotoxic problems at "3 Leaves" stage of tomato plants, although the total biomass and crop yield was not affected. In the "Fruit" stage, the treatments had no negative effects. Coatings reduced the respiration rate of tomatoes, diminished weight loss during postharvest storage and were effective to decrease the fungal decay of tomatoes inoculated with R. stolonifer. Migration of thymol and carvacrol from CH-MC films in food simulants could overcome the stablished specific migration limit (60 mg/kg) for food contact packaging materials in aqueous and low pH systems if films contain a 1:1 polymer essential oil weight ratio. / [ES] En la presente tesis doctoral se han desarrollado diferentes materiales antifúngicos para su uso en conservación de frutas. Para ello, se han incorporado diferentes aceites esenciales (AE) en recubrimientos y películas de quitosano (Q). Se ha analizado el efecto de la adición de ácido oleico (AO) y las condiciones de homogeneización sobre la estabilidad de las emulsiones y sobre las propiedades de las películas. Se ha estudiado el efecto de los recubrimientos de Q sobre el deterioro fúngico en fresas y el efecto preventivo frente a infecciones fúngicas de las mezclas de metilcelulosa (MC) con Q en plantas de tomate. Se ha estudiado el efecto de la composición de las películas sobre las propiedades funcionales de las mismas, así como su actividad antimicrobiana in vitro e in vivo. La incorporación de AO en las películas de Q (proporción 1:1) redujo la permeabilidad al agua (PVA) en un 50% comparado con la de Q puro. La microfluidización indujo un efecto positivo sobre dicha reducción. La adición de AE (hoja de canela, tomillo o albahaca) no supuso una disminución notable de los valores de permeabilidad obtenidos para las películas de Q. Cuando se añadió AO a las formulaciones de Q y AE (proporciones 1:1 o 1:2), se promovió una mejora significativa en la PVA de las películas. En cambio, la adición de lípidos aumentó ligeramente la permeabilidad al oxígeno, disminuyó la elasticidad y la rigidez, y produjo un menor impacto sobre la resistencia a la rotura. A su vez, la adición de AE modificó el comportamiento mecánico de las películas. Los AE de tomillo y albahaca aumentaron considerablemente la rigidez y la resistencia a la rotura, mientras que el AE de hoja de canela redujo estos parámetros ligeramente. La adición de lípidos a las películas de Q afectó las propiedades ópticas de las mismas. El AO redujo la transparencia y el brillo, en función de la concentración añadida. La adición de AE tuvo un mayor impacto sobre los parámetros de color y el índice de blancura. Las mezclas de AE y AO mitigaron estos cambios de color. Además, la incorporación de las mezclas AE-OA redujo las pérdidas de volátiles del AE durante la formación de las películas. Las películas formuladas con el AE de hoja de canela fueron efectivas contra el crecimientos de A. niger, B. cinerea y R. stolonifer, aunque los AE de tomillo y albahaca encapsulados en las películas no mostraron ninguna actividad antifúngica. La aplicación de los diferentes recubrimientos de Q AE de C en fresas inoculadas con R. stolonifer dio lugar a una reducción en el deterioro fúngico de los frutos almacenados durante 14 días a 10°C. Los recubrimientos de Q-AE de limón también fueron efectivos en el control del deterioro fúngico en fresas. Estos recubrimientos no afectaron significativamente los parámetros físico-químicos de las fresas durante el almacenamiento en refrigeración, disminuyeron la tasa de respiración de los frutos y acentuaron la actividad antifúngica del Q frente a B. cinerea. Tanto los recubrimientos con AE como los de Q puro modificaron el perfil de volátiles de las fresas, aunque estos cambios solo fueron apreciados sensorialmente en el caso de los frutos recubiertos con AE. Las mezclas de Q y MC que contenían AE de orégano causaron efectos fitotóxicos en plantas de tomate en el estadio "3 hojas", aunque no afectaron a la biomasa total. En el estadio "frutos" los tratamientos no tuvieron ningún efecto negativo. Los recubrimientos redujeron la tasa de respiración de los tomates, disminuyeron la pérdida de peso durante el almacenamiento post-cosecha y fueron efectivos contra el deterioro fúngico de tomates inoculados con R. stolonifer. La migración de los compuestos fenólicos timol y carvacrol, contenidos en las películas de Q-MC, podría superar el límite de migración específica establecido (60 mg/Kg) para materiales de envase en contacto con alimentos en los casos de sistemas acuosos y d / [CA] En la present tesi doctoral s'han desenvolupat diferents materials antifúngics per al seu ús en conservació de fruites. Per a açò, s'han incorporat diferents olis essencials (OE) en recobriments i pel·lícules de quitosano (Q). S'ha analitzat l'efecte de l'addició d'àcid oleic (AO) i les condicions d'homogeneïtzació sobre l'estabilitat de les emulsions i sobre les propietats de les pel·lícules obtingudes. S'ha estudiat l'efecte dels recobriments de Q sobre la deterioració fúngica en maduixes i l'efecte preventiu enfront d'infeccions fúngiques de les mescles de metilcelulosa (MC) amb Q en plantes de tomaca. S'ha estudiat l'efecte de la composició de les pel·lícules sobre les propietats funcionals de les mateixes, així com la seua activitat antimicrobiana in vitro i in vivo. La incorporació de AO en les pel·lícules de Q (1:1) va reduir la permeabilitat al vapor d'aigua (PVA) en un 50% comparat amb la de Q pur. La microfluidització va induir un petit efecte positiu sobre aquesta reducció. L'addició de AE (fulla de canyella, C, timó, T, i alfàbrega, A) no va suposar una disminució notable dels valors de permeabilitat obtinguts per a les pel·lícules de Q. Quan es va afegir AO a les formulacions de Q i AE, es va promoure una millora significativa en la PVA de les pel·lícules. Per contra, l'addició de lípids va augmentar lleugerament la permeabilitat a l'oxigen, va disminuir l'elasticitat i la rigidesa, i va produir un menor impacte sobre la resistència al trencament. Al seu torn, l'addició de OE va modificar el comportament mecànic de les pel·lícules. Els OE de T i d'A van augmentar considerablement la rigidesa i la resistència al trencament, mentre que l'OE de C va reduir aquests paràmetres lleugerament. L'addició de lípids a les pel·lícules de Q també va afectar les propietats òptiques de les mateixes. L'AO va reduir la transparència i la lluentor, en funció de la concentració afegida. L'addició d'OE va tenir un major impacte sobre el paràmetres de color i l'índex de blancor. Les mescles d'OE i AO van mitigar aquests canvis de color. A més, la incorporació de les mescles OE-AO va reduir les pèrdues de volàtils de l'OE durant la formació de les pel·lícules. Les pel·lícules formulades amb l'OE de C van ser efectives contra el creixements d'A. niger, B. cinerea i R. stolonifer, encara que els OE de T i A encapsulats en les pel·lícules no van mostrar cap activitat antifúngica. L'aplicació dels diferents recobriments de Q OE de fulla de canyella en maduixes inoculades amb R. stolonifer va donar lloc a una reducció en la deterioració fúngica dels fruits emmagatzemats durant 14 dies a 10°C. Els recobriments de Q-OE de llimó també van ser efectius en el control de la deterioració fúngica en maduixes. Aquests recobriments no van afectar significativament els paràmetres fisicoquímics de les maduixes durant l'emmagatzematge en refrigeració, van disminuir la taxa de respiració dels fruits i van accentuar l'activitat antifúngica del Q enfront de B. cinerea. Tant els recobriments amb OE com els de Q pur van modificar el perfil de volàtils de les maduixes, encara que aquests canvis sol van ser apreciats sensorialment en el cas dels fruits recoberts amb OE. Les mescles de Q:MC que contenien OE d'orenga van causar efectes fitotòxics en plantes de tomaca en l'estadi "3 fulles", encara que no van afectar a la biomassa total. En l'estadi "fruits" els tractaments no van tenir cap efecte negatiu. Els recobriments van reduir la taxa de respiració de les tomaques, van disminuir la pèrdua de pes durant l'emmagatzematge post collita i van ser efectius contra la deterioració fúngica de tomaques inoculades amb R. stolonifer. La migració dels compostos fenòlics timol i carvacrol, continguts en les pel·lícules de Q-MC, podria superar el límit de migració específica establit (60 mg/Kg) per a materials d'envàs en contacte amb aliments en els casos de sistemes aquosos i d / Perdones Montero, Á. (2015). ANTIFUNGAL CHITOSAN-BASED FILMS AND COATINGS CONTAINING ESSENTIAL OILS FOR FRUIT APPLICATIONS [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/59413 / Compendio