No description available.

No description available.

The electric power supply industry has evolved into one of the largest industries. Even though secure and reliable operation of the electric power system is fundamental to economy, social security and quality of modern life, the complicated power grid is now facing severe challenges to meet the high-level secure and reliable operation requirements. New technologies will play a major role in helping today's electric power industry to meet the above challenges. This dissertation has focused on some key technologies among them, including the emerging technologies of energy storage, controlled power electronics and wide area measurement technologies. Those technologies offer an opportunity to develop the appropriate objectives for power system control. The use of power electronics based devices with energy storage system integrated into them, such as FACTS/ESS, can provide valuable added benefits to improve stability, power quality, and reliability of power systems. The study in this dissertation has provided several guidelines for the implementation of FACTS/ESS in bulk power systems. The interest of this study lies in a wide range of FACTS/ESS technology applications in bulk power system to solve some special problems that were not solved well without the application of FACTS/ESS. The special problems we select to solve by using FACTS/ESS technology in this study include power quality problem solution by active power compensation, electrical arc furnace (EAF) induced problems solution, inter-area mode low frequency oscillation suppression, coordination of under frequency load shedding (UFLS) and under frequency governor control (UFGC), wide area voltage control. From this study, the author of this dissertation reveals the unique role that FACTS/ESS technology can play in the bulk power system stability control and power quality enhancement in power system. In this dissertation, almost all the studies are based on the real system problems, which means that the study results are special valuable to certain utilities that have those problems. The study in this dissertation can assist power industry choose the right FACTS/ESS technology for their intended functions, which will improve the survivability, minimize blackouts, and reduce interruption costs through the use of energy storage systems. / Ph. D.

Wide Area Measurements (WAMs) have been widely used in the energy management system (EMS) of power system for monitoring, operation and control. In recent years, the advent of synchronized Phasor Measurements Unit (PMU) has added another dimension to the field of wide-area measurement. However, the high cost of the PMU, which includes the manufacture and deployment fee, is a hurdle to the wide use of the PMU in power systems. Unlike traditional PMUs, the frequency monitoring network (FNET) developed by the Virginia Tech Power IT lab is an Internet—based, GPS—synchronized, wide-area frequency monitoring network deployed at the distribution level, providing a low-cost and easily deployable WAMs solution. In this dissertation, the research work can be categorized into two parts: FNET Design and Situation Awareness Algorithm Development. / Ph. D.

The procedures of the study are mainly through the review on the relevant reference documents related to the subject of those have been published domestically and internationally, meanwhile to get a better understanding on the most recent development on Information Technology and its associated models which are being applied to the customer relationship management by the organizations and/or business units in the world. Then, through the investigation and review on steel industries to understand the real situations domestically and internationally, specifically to focus on the Sheng Yu Steel Co., Ltd. As an example, for which to plan the implementation of Extranet System for the improvement of Customer Relationship Management (CRM) by using Information Technology, what problems it will be faced and how is the best strategyfor this implementation. Then after the completion of the study, to make a constructive recommendation to the Sheng Yu Steel Co., Ltd as an useful reference when the Extranet system to be planned and implementedfor. In Chapter-1 ¡©Introduction¡ª¡Ato descibe the backgroud, purposes, procedures and the limitation related to the study¡Fin Chapter-2, the major is concentrate on the review and understand on the relevant documents of the subject related¡Fin Chapter-3, specifically to focus on the existing situations of the steel industries and the Sheng Yu Steel Co., Ltd. how it is the current situation to the subject issue¡Fin Chapter-4, to have further investigation on recent situations for the use of Information Technology in Sheng Yu Steel Co., Ltd. to make a recommendation for their reference whn they plan for the implementation of Extranet System for the improvement of Customer Relationship Management¡Fand finally, in Chapter-5, to describe the findings and issues for whicht to be expected to have further study in the future to come up a generalized model for which can be applied to all companies not only for steel industies but also to all conventional enpterprises as an important and valuable reference guideline.

No description available.

Abstract The Internet of Things (IoT) is already providing solutions to various tasks related to monitoring the environment and controlling devices over wired and wireless networks. It is estimated by several well-known research facilities that the number of IoT devices will be in the order of tens of billions by 2020. This inevitably brings challenges and costs in deployment, management, and maintenance of networks. The focus of this thesis is to provide solutions that mainly help in the deployment and maintenance of various wireless IoT networks. Different applications have different requirements for a wireless link coverage. It is important to utilize suitable radio technology for a particular application in order, e.g., to maximize the lifetime of a device. A wireless body area network (WBAN) typically consists of devices that are within couple of meters from each other. The WBAN is suitable for, e.g., measuring muscle activity and transferring data to a storage for processing. The wireless link can use air as a medium, or alternatively, an induced electric field to a body can be used. In this thesis, it is shown that a location of the electrodes in the body have impact to the attenuation. Home automation IoT applications are typically implemented with mid-range wireless technologies, known as wireless personal area networks (WPAN). In order to minimize and get rid of battery change operations, a wake-up receiver could be utilized in order to improve the device’s energy efficiency. The concept is introduced and performance of the current state-of-the-art works are presented. In addition, a control loop enabling a passive device to have control over an energy source is proposed. Applications that have low bandwidth requirements can be implemented with low-power wide area networks (LPWAN). One technology – LoRaWAN – is evaluated, and it is recommended as based on the results to use it in non-critical applications. / Tiivistelmä Esineiden internet (Internet of Things, IoT) mahdollistaa jo laajan kirjon erilaisia ratkaisuja ympäristön monitorointiin ja laitteiden hallintaan hyödyntäen sekä langattomia että langallisia verkkoja. Usea hyvin tunnettu tutkimusorganisaatio on arvioinut, että vuonna 2020 IoT laitteiden määrä tulee olemaan kymmenissä miljardeissa. Se luo väistämättä haasteita laitteiden sijoittamisessa, hallinnassa ja kunnossapidossa. Tämä väitöskirja keskittyy tarjoamaan ratkaisuja, jotka voivat helpottaa langattomien IoT laitteiden sijoittamisessa ja kunnossapidossa. IoT sovellusten laaja kirjo vaatii erilaisia langattomia radioteknologioita, jotta sovellukset voitaisiin toteuttaa, muun muassa, mahdollisimman energiatehokkaasti. Langattomassa kehoverkossa (wireless body area network, WBAN) käytetään usein hyvin lyhyitä langattomia linkkejä. WBAN on soveltuva esimerkiksi lihasten aktiivisuus mittauksessa ja mittaustiedon siirtämisessä talteen varastointia ja prosessointia varten. Linkki voidaan toteuttaa käyttäen ilmaa rajapintana, tai vaihtoehtoisesti, kehoa. Tässä työssä on näytetty, että käytettäessä kehoa siirtotienä, elektrodien sijainnilla on merkitystä signaalin vaimennuksen kannalta. Kotiautomaatio IoT sovellukset ovat tyypillisesti toteutettu käyttäen langatonta likiverkkoa, jossa linkin pituus sisätiloissa on alle 30 metriä. Jotta päästäisiin eroon pariston vaihto-operaatiosta tai ainakin vähennettyä niiden määrää, herätevastaanotinta käyttämällä olisi mahdollista parantaa laitteiden energiatehokkuutta. Herätevastaanotin konsepti ja tämänhetkistä huipputasoa edustavien vastaanottimien suorituskyky ovat esitetty. Lisäksi, on ehdotettu menetelmä joka takaa energian saannin passiiviselle IoT laitteelle. IoT sovellukset jotka tyytyvät vähäiseen kaistanleveyteen voidaan toteuttaa matalatehoisella laajan alueen verkolla (low-power wide area network, LPWAN). Yhden LPWAN teknologian, nimeltään LoRaWAN, suorituskykyä on evaluoitu. Tulosten perusteella suositus on hyödyntää kyseistä teknologiaa ei-kriittisissä sovelluksissa.

Orientador: Prof. Dr. João Henrique Kleinschmidt / Dissertação (mestrado) - Universidade Federal do ABC, Programa de Pós-Graduação em Engenharia da Informação, Santo André, 2018. / Em 2006 o governo brasileiro instituiu o sistema nacional de identificação automática de veículos (SINIAV), cujo objetivo principal é fiscalizar todos os veículos através da tecnologia de identificação por rádio frequência (RFID). Entretanto, esse projeto tem um grande desafio tecnológico com relação a conectividade e transmissão de dados quando aplicado dentro das cidades, o que pode dificultar sua escalabilidade. Por isso, o objetivo dessa dissertação é estudar a viabilidade técnica do uso do LoRa para a transmissão dos dados provenientes da fiscalização eletrônica de veículos através de RFID. Então, uma análise de desempenho de um sistema composto por uma antena RFID, para realizar as leituras das tags, e um transmissor LoRa, para enviar essas leituras a um gateway conectado à internet, foi realizado e as métricas de taxa de perda de pacotes (PER) e taxa de envio de pacotes (throughput) da transmissão do LoRa foram medidas. Os resultados obtidos mostraram que em determinados cenários é possível obter uma taxa de perda de pacotes abaixo de 20% e uma taxa de envio de pacotes acima de 60 envios por minuto, o que torna o uso do LoRa uma tecnologia viável para essa aplicação de fiscalização e outras aplicações relacionadas à sistemas inteligentes de transporte (ITS). / In 2006, the Brazilian government instituted the national system of automatic vehicle identification (SINIAV), whose main objective is to control all vehicles through radio frequency identification (RFID) technology. However, this project has a great technological challenge regarding connectivity and data transmission when applied within cities, which may hinder its scalability. Therefore, the objective of this dissertation is to study the technical feasibility of the use of LoRa for the transmission of data from the electronic surveillance of vehicles through RFID. Then, a performance analysis of a system composed of an RFID antenna to perform the readings of the tags and a LoRa transmitter to send those readings to a gateway connected to the Internet was performed and the packet loss rate metrics (PER) and LoRa transmission throughput rates were measured. The results show that in certain scenarios it is possible to obtain a packet loss rate of less than 20% and a packet sending rate of more than 60 packets per minute, which makes the use of LoRa a viable technology for this enforcement application and other applications related to Intelligent Transport Systems (ITS).

Continued increase in system load leading to a reduction in operating margins, as well as the tendency to move towards a deregulated grid with renewable energy sources has increased the vulnerability of the grid to blackouts. Advanced intelligent techniques are therefore required to design new monitoring schemes that enable smart grid operation in a secure and robust manner. As the grid is highly interconnected, monitoring of transmission and distribution systems is increasingly relying on digital communication. Conventional security assessment techniques are slow, hampering real-time decision making. Hence, there is a need to develop fast and accurate security monitoring techniques. Intelligent techniques that are capable of processing large amounts of captured data are finding increasing scope as essential enablers for the smart grid. The research work presented in this thesis has evolved from the need for enhanced monitoring in transmission and distribution grids. The potential of intelligent techniques for enhanced system monitoring has been demonstrated for disturbed scenarios in an integrated power system. In transmission grids, one of the challenging problems is network partitioning, also known as network area-decomposition. In this thesis, an approach based on relative electrical distance (RED) has been devised to construct zonal dynamic equivalents such that the dynamic characteristics of the original system are retained in the equivalent system within the desired accuracy. Identification of coherent generators is another key aspect in power system dynamics. In this thesis, a support vector clustering-based coherency identification technique is proposed for large interconnected multi-machine power systems. The clustering technique is based on coherency measure which is formulated using the generator rotor measurements. These rotor measurements can be obtained with the help of Phasor Measurement Units (PMUs). In distribution grids, accurate and fast fault identification of faults is a key challenge. Hence, an automated fault diagnosis technique based on multi class support vector machines (SVMs) has been developed in this thesis. The proposed fault location scheme is capable of accurately identify the fault type, location of faulted line section and the fault impedance in the distributed generation (DG) systems. The proposed approach is based on the three phase voltage and current measurements available at all the sources i.e. substation and at the connection points of DGs. An approach for voltage instability monitoring in 3-phase distribution systems has also been proposed in this thesis. The conventional single phase L-index measure has been extended to a 3-phase system to incorporate information pertaining to unbalance in the distribution system. All the approaches proposed in this thesis have been validated using standard IEEE test systems and also on practical Indian systems.

Předkládaná disertační práce je zaměřena na „Výzkum spolehlivé komunikace pro IoT aplikace v bezdrátových sítích využívajících technologie Multi-RAT LPWAN“. Navzdory značnému pokroku v oblasti vývoje LPWA technologií umožňující masivní komunikace mezi zařízeními (mMTC), nemusí tyto technologie výkonnostně dostačovat pro nově vznikající aplikace internetu věcí. Hlavním cílem této disertační práce je proto nalezení a vyhodnocení limitů současných LPWA technologií. Na základě těchto dat jsou nevrženy nové mechanismy umožňující snazší plánování a vyhodnocování síťového pokrytí. Navržené nástroje jsou vyladěny a validovány s využitím dat získaných z rozsáhlých měřících kampaních provedených v zákaznických LPWA sítích. Tato disertační práce dále obsahuje návrh LPWA zařízení vybavených více komunikačními rozhraními (multi-RAT) které mohou umožnit překonání výkonnostních limitů jednotlivých LPWA technologií. Současná implementace se zaměřuje zejména na snížení spotřeby zařízení s více rádiovými rozhraními, což je jejich největší nevýhodou. K tomuto účelu je využito algoritmů strojového učení, které jsou schopné dynamicky vybírat nejvhodnější rozhraní k přenosu.