Synthetic plastics are intrinsic to modern human existence. Unfortunately, many challenges exist related to the accumulation of plastic waste, including greenhouse gas emissions, contamination of natural environments, and entrance into the food chain through microplastics. Therefore, new polymers are being developed that both compete with the capabilities and costs of petroleum-based plastics and have assured biodegradability. Through decades of research, plant oils have emerged as one of the leading options for alternative starting materials because of their feasibility for use in polymerization reactions, wide availability, renewability, and cost-effectiveness. In this work, cottonseed oil (CSO) and soybean oil (SBO) are successfully utilized to synthesize polymers with a range of promising properties. A nanocomposite was produced by incorporating cellulose nanocrystals (CNCs) into an epoxidized CSO (ECSO) polymer matrix. A significant improvement in properties such as tensile stiffness and strength, without any substantial decrease in extensibility or thermal integrity has been observed. This demonstrated that CNCs can be used to tune the CSO- based polymer properties. Enzymes are excellent alternatives to traditional catalysts as they eliminate the necessity of elevated reaction temperatures and pressures. Epoxidized SBO (ESBO) was polymerized using immobilized candida antarctica lipase B (Novozyme N435). The resulting polymer was inhomogeneous, with soluble waxy and insoluble solid components. Analyses of the soluble component indicated the formation of a multi-branched polymer, showing that a greener system may be used to produce ESBO-based polymers. It is necessary to test the biodegradability of biobased polymers to confirm their validity as alternatives to traditional plastics. Degradation of the CNC-incorporated CSO-based network polymer was characterized by submersing specimens into various aqueous media, including artificial seawater and saltwater, to simulate realistic end-of-use scenarios. Decomposition occurred due to hydrolysis of the many ester linkages within the polymer structure. The presence of CNCs appeared to enhance the rate of degradation. Overall, the hydrolytic susceptibility of the CSO-based network polymer was observed as enhanced by incorporating CNCs. In summary, this work demonstrates the viability of using plant oils and CNCs to produce biodegradable polymers with a range of properties, thus aiding in the effort to replace traditional plastics.

Doctor of Philosophy / This study emphasizes the need to incorporate sustainable practices into urban planning in Saudi Arabia, therefore helping the country's Vision 2030 goals for a greener future. The research focuses on developing a framework for constructing beautiful wall panels using recycled materials, which is critical for solving energy and environmental issues. By integrating several research methodologies, the study creates an initial framework that is subsequently refined with expert feedback. The findings suggest that employing recycled materials for these wall panels not only improves their beauty but also helps to create a more sustainable and environmentally responsible approach to building in Saudi Arabia. This study's findings provide architects and designers with practical suggestions to assist them in creating more sustainable construction practices in the region.

Microtubules are cytoskeletal protein polymers relevant to a wide range of cell functions. In order to polymerize, the constituent tubulin subunits need to bind the nucleotide GTP, but its subsequent hydrolysis to GDP in the microtubule lattice induces depolymerization. The resulting behaviour of stochastic switching between growth and shrinkage is called dynamic instability. Both dynamic instability and microtubule mechanical properties are integral to many cell functions, yet are poorly understood. The present study uses thermal fluctuation measurements of grafted microtubules with different nucleotide contents to extract stiffnesses, relaxation times, and drag coefficients with an unprecedented precision. Both the stiffness and the relaxation time data indicate that stiffness is a function of length for GDP microtubules stabilized with the chemotherapy drug taxol. By contrast, measurements on microtubules polymerized with the non-hydrolizable GTP-analogue GMPCPP show a significantly higher, but constant, stiffness. The addition of taxol is shown to not significantly affect the properties of these microtubules, but a lowering of the GMPCPP content restores the length-dependent stiffness seen for taxol microtubules. The data are interpreted on the basis of a recent biopolymer model that takes into account the anisotropic architecture of microtubules which consist of loosely coupled protofilaments arranged in a tube. Using taxol microtubules and GMPCPP microtubules as the respective analogues of the GDP and GTP state of microtubules, evidence is presented that shear coupling between neighbouring protofilaments is at least two orders of magnitude stiffer in the GTP state than in the GDP state. Previous studies of nucleotide effects on tubulin have focussed on protofilament bending, and the present study is the first to be able to show a dramatic effect on interprotofilament bonds. The finding’s profound implications for dynamic instability are discussed. In addition, internal friction is found to dominate over hydrodynamic drag for microtubules shorter than ∼ 4 μm and, like stiffness, to be affected by the bound nucleotide, but not by taxol. Furthermore, the thermal shape fluctuations of free microtubules are imaged, and the intrinsic curvatures of microtubules are shown for the first time to follow a spectrum reminiscent of thermal bending. Regarding the extraction of mechanical data, this assay, though previously described in the literature, is shown to suffer from systematic flaws.

During the global pandemic of coronavirus, the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) outbreak, the world was desperately searching for simpler yet more effective solutions to stop the spread of coronavirus (COVID-19). Since no one was prepared for the fast spread of such a contagious virus, there was a shortage of proper protective solutions to stop the spread. Large quantities of alcohol-based disinfectant and hand sanitizers were used, but it led to global shortages. It is desired to have a water-based, easily applied, low-cost and long-lasting disinfectant that can prevent the spread of coronavirus on any surface, without the issue of skin allergies or skin-drying as often found while using alcohol. Inspired by nature, chitosan (CS), a natural biopolymer with well-known antimicrobial and film-forming properties, was tested in this study for the preparation of coatings spread onto various surfaces and the antiviral effect was evaluated. Zinc oxide (ZnO), a material generally recognized as safe (GRAS) by the US Food and Drug Administration (FDA), is a photocatalyst that was embedded in chitosan to enhance the antimicrobial and antiviral performance of the coatings. In order to apply water-based chitosan formulation on hydrophobic polypropylene (PP) surgical mask and polyethylene terephthalate (PET) surface, the plastics were treated with either oxygen plasma or corona plasma to improve the surface hydrophilicity. The corona plasma treatment decreased the water contact angle (WCA) of the surgical mask from approximately 125° to 101° and drastically reduced WCA of the PET film from approximately 100° to 29°. The PET film was coated with CS – ZnO nanocomposite, which contains 1% chitosan and 5 wt.% (w.r.t weight of chitosan) ZnO nanoparticles. The capability of photocatalytic degradation of CS – ZnO coating was demonstrated during the degradation of methylene blue dye molecules. Additionally, we evaluated the antiviral effect of the CS – ZnO nanocomposite coating on PET plastic films under typical room lighting conditions by measuring the inactivation of lentivirus. This approach utilizes the pseudotype system, which is a reliable tool to study under conventional biosafety conditions, particularly for certain pathogenic strains of coronaviruses (CoVs) which have a strong pathogenicity. / Under den globala coronapandemin, utbrottet av allvarligt akut respiratoriskt syndrom coronavirus 2 (SARS-CoV-2), sökte världen desperat efter enklare men ändå mer effektiva lösningar för att stoppa spridningen av coronaviruset (COVID-19). Eftersom ingen var förberedd på en så smittsam sjukdom uppstod en brist på lämpliga skyddsmetoder för att stoppa spridningen. Stora mängder alkoholbaserade desinfektionsmedel och handdesinfektionsmedel användes, vilket skapade en global brist. Det önskades en vattenbaserad, lättapplicerad, kostnadseffektiv och långvarig desinfektionsmedel som kunde förhindra spridningen av coronaviruset på vilken yta som helst, utan problem med allergiska reaktioner eller uttorkning av huden som ofta uppstår vid användning av alkohol. Med inspiration från naturen testades kitosan, en naturlig biopolymer med välkända antimikrobiella och film-formande egenskaper, för att göra beläggningar på olika ytor och testa deras antivirala effekt. Zinkoxid (ZnO), ett material som allmänt erkänns som säkert (GRAS) av US Food and Drug Administration (FDA), är en fotokatalysator och användes i kitosanbeläggningen för att förbättra den antimikrobiella och antivirala effekten. För att applicera den vattenbaserade kitosanformuleringen på hydrofoba ytor på en kirurgisk mask av polypropen (PP) och en plastfilm av polyetylentereftalat (PET), behandlades plasterna med antingen O2 eller corona plasma för att förbättra ytornas hydrofilicitet. Behandlingen av corona plasma minskade vattenkontaktvinkeln på den kirurgiska masken från cirka 125° till 101° och för PET-filmen från cirka 100° till 29°. PET-filmen belades med CS – ZnO nanokomposit, som innehåller 1% kitosan och 5 wt.% (med avseende på vikten av kitosan) ZnO nanopartiklar. Förmågan till fotokatalytisk nedbrytning av CS – ZnO-beläggningen demonstrerades genom att bryta ned metylenblå färgmolekyler. Dessutom utvärderades vi den antivirala effekten av CS – ZnO nanokompositbeläggningen på PET-filmer i normal rumsbelysning genom att mäta dess förmåga att inaktivera lentivirus. Denna metod använder pseudotypsystemet, vilket är ett tillförlitligt verktyg för att studera under konventionella biosäkerhetsförhållanden, särskilt för vissa patogena stammar av coronavirusen (CoVs) som har en hög patogenicitet.

The work presented in this thesis leads to the formulation of a dynamic mathematical model of an immersed membrane bioreactor (iMBR) for wastewater treatment. This thesis is organised into three parts, each one describing a different set of tasks associated with model development and simulation. In the first part, the Author qualitatively and quantitatively compares various published activated sludge models, i.e. models of biochemical processes associated with bacterial growth, decay, lysis and substrate utilisation in activated sludge systems. As the thesis is focused on modelling membrane bioreactors (MBRs) which are known to experience membrane fouling as a result of adsorption of biopolymers present in the bulk liquid onto and within the membrane, all activated sludge models considered in this thesis are able to predict, with various levels of accuracy, the concentrations of biopolymeric substances, namely soluble microbial products (SMP) and extracellular polymeric substances (EPS). Some of the published activated sludge models dedicated to modelling SMP and EPS kinetics in MBR systems were unable to predict the SMP and EPS concentrations with adequate levels of accuracy, without compromising the predictions of other sludge and wastewater constituents. In other cases, the model equations and the assumptions made by their authors were questionable. Hence, two new activated sludge models with SMP and EPS as additional components have been formulated, described, and simulated. The first model is based on the Activated Sludge Model No. 1 (ASM1) whereas the second model is based on the Activated Sludge Model No. 3 (ASM3). Both models are calibrated on two sets of data obtained from a laboratory-scale system and a full-scale system and prove to be in very good agreement with the measurements. The second part of this thesis explains the development of two membrane fouling models. These models are set to describe the loss of membrane permeability during filtration of various solutions and suspensions. The main emphasis is placed on filtration of activated sludge mixtures, however the models are designed to be as general as feasibly possible. As fouling is found to be caused by a large number of often very complex processes which occur at different spatial as well as temporal scales, the two fouling models developed here have to consider a number of significant simplifications and assumptions. These simplifications are required to balance the model's accuracy, generality and completeness with its usability in terms of execution times, identifiability of parameters and ease of implementation in general purpose simulators. These requirements are necessary to ascertain that long term simulations as well as optimisation and sensitivity studies performed in this thesis either individually on fouling models or on the complete model of a MBR can be carried out within realistic time-scales. The first fouling model is based on an idea that fouling can be subdivided into just two processes: short-term reversible fouling and long-term irreversible fouling. These two processes are described with two first order ordinary differential equations (ODEs). Whilst the first model characterises the membrane filtration process from an observer's input-output point of view without any rigorous deterministic description of the underlying mechanisms of membrane fouling, the second model provides a more theoretical and in-depth description of membrane fouling by incorporating and combining three classical macroscopic mechanistic fouling equations within a single simulation framework. Both models are calibrated on a number of experimental data and show good levels of accuracy for their designated applications and within the intended ranges of operating conditions. In the third part, the first developed biological model (CES-ASM1) is combined with the behavioural fouling model and the links between these two models are formulated to allow complete simulation of a hollow fibre (HF) immersed membrane bioreactor (iMBR). It is assumed that biological processes affect the membrane through production of mixed liquor suspended solids (MLSS), SMP and EPS which cause pore blockage, cake formation, pore diameter constriction, and affect the specific cake resistance (SCR). The membrane, on the other hand, has a direct effect on the bulk liquid SMP concentration due to its SMP rejection properties. SMP are assumed to be solely responsible for irreversible fouling, MLSS is directly linked to the amount of cake depositing on the membrane surface, whereas EPS content in activated sludge affects the cake's SCR. Other links provided in the integrated MBR model include the effects of air scouring on the rate of particle back-transport from the membrane surface and the effects of MLSS concentration on oxygen mass transfer. Although backwashing is not described in great detail, its effects are represented in the model by resetting the initial condition in the cake deposition equation after each backwash period. The MBR model was implemented in Simulink® using the plant layout adopted in the MBR benchmark model of Maere et al. [160]. The model was then simulated with the inputs and operational parameters defined in [36, 160]. The results were compared against the MBR benchmark model of Maere et al. [160] which, contrary to this work, does not take into account the production of biopolymers, the membrane fouling, nor any interactions between the biological and the membrane parts of an MBR system.

Cereals contain naturally occurring biopolymers (for example proteins and starches) that can be used as renewable raw materials in a variety of speciality chemical applications. The separation of protein and starch biopolymers from wheat is well established and relies on a group of proteins called glutens that have a unique network-forming functionality. Oat and other cereals do not naturally contain these gluten proteins and typically rely on chemical-based separation techniques which alter the chemical and physical structures and damage the inherent natural functionality of the biopolymers. This research study investigated the separation of the protein and starch fractions from cereals using the Al-Hakkak Process, a new aqueous process. This process involves adding water and wheat gluten protein to cereals that do not contain gluten. The wheat gluten interacts with the cereal proteins, facilitating the separation of the starch and protein fractions whilst retaining their inherent natural functionality. The aim of this research project was to investigate and optimise the pilot scale separation performance of the Al-Hakkak Process using oat flour. As very little prior research had been carried out, the focus was to characterise the oat starch and protein separation performance and gain an understanding of the mechanisms involved. A variety of techniques were employed. Large scale deformation rheology was used to gain an understanding of the oat-gluten dough rheology and establish the relationship between the rheology and the separation performance. Confocal scanning laser microscopy was used to investigate the structure of the oat-gluten protein network. The molecular interactions between the oat and gluten proteins were studied using gel electrophoresis. The network-forming functionality of the new oat-gluten protein was explored. The influence of various processing parameters on the pilot scale separation performance was investigated and the results compared with other data collected through the study to identify key processing parameters. This research programme has resulted in interesting, encouraging and some unexpected outcomes and these are discussed in detail in the thesis. It was concluded that an insoluble protein network formed in the oat-gluten dough and both kneading and extraction processes were found to contribute to the formation of this. A key conclusion was that the changes that took place in the oat-gluten dough were similar to, but not identical to, the changes that occur in wheat dough. It was proposed that the mechanism for the development of a protein network in oat-gluten dough differed from wheat dough for two main reasons: a) the presence of the oat flour disrupted the normal wheat gluten behaviour, and b) components in the oat flour altered the activity of the gluten proteins. The research identified key processing parameters for the Al-Hakkak Process including kneading time, gluten content, and sodium chloride content of the oat-gluten dough as well as sodium chloride concentration, pH, and temperature of the extract liquor. An important discovery was that the oat and gluten proteins interacted at a molecular level through reducible, covalent, bonding (most likely disulphide linkages) to form the insoluble protein network in the oat-gluten dough. It was concluded that these reducible bonds coupled the individual protein subunits to form new hybrid oat-gluten protein molecules (a combination of oat proteins and gluten proteins). Both insoluble and soluble proteins in the oat and gluten flour were involved in the formation of the insoluble protein network in the oat-gluten dough. This outcome has applications beyond the Al-Hakkak Process, as this new knowledge can be applied to the wider dough processing industry. It was concluded that the wheat gluten was the source of the protein network-forming functionality of the hybrid oat-gluten protein and that the oat proteins had a diluting effect. It was proposed that oat-gluten protein flour from the Al-Hakkak Process could be reused to replace the commercial wheat gluten flour in subsequent production batches. During spray drying of the starch stream, the soluble biopolymers in the extract liquor were found to act as an adhesive and glued individual starch granules together to form spherical agglomerates. Acidification of the extract liquor was found to enhance this agglomeration. It was proposed the acidified starch granules were sticker during spray drying due to the partial acid hydrolysis of the starch granule suface which enhanced the agglomeration.

Le risque d'épuisement de ressources naturelles fossiles à partir desquelles nombres d'oléfines sont fabriqués, a permis le développement de nouveaux matériaux polymères, 100% renouvelables dénommés biopolymères. L'acide poly lactique est sans doute le plus prometteur d'entre eux. D'origine naturelle, ce polyester est synthétisé à partir d'aliments riches en amidon tels que le maïs, la betterave ou la pomme de terre. Son caractère biodégradable lui offre un large éventail d'applications dans les domaines aussi variés et divers que la médecine, le bâtiment, l'industrie automobile, le biomédicale ou encore le textile habillement. Ce travail consiste à étudier la structure et la texture de l'isomère mixte (PDLA) et de déterminer l'incidence de sa morphologie sur les propriétés mécaniques et tinctoriales requises pour des applications textiles. Nous avons par des méthodes spectrales, caractérisé le polymère afin d'en déterminer entre autre, la composition massique, et la stéréorégularité, paramètres très importants ayant une forte influence sur les propriétés mécaniques du polymère, notamment la stabilité thermique ou la résistance à l'hydrolyse. Nos expériences menées sur la stabilité thermique du polymère révèlent que le polymère est susceptible de s'hydrolyser sous l'action combinée de l'eau, de la température et du pH, entraînant ainsi une diminution de la masse moléculaire, donc, une perte de propriétés mécaniques de la fibre.Le PLA est également un polymère qui supporte mal la teinture, et seuls les colorants dispersés sont susceptibles de teinte cette fibre sous certaines conditions. L'étude de la cinétique de fixation de trois colorants dispersés sur la fibre de PLA à permis d'établir une relation entre la structure du colorant et ses propriétés tinctoriales. / The risk of exhaustion of fossil natural resources from which count of polymers are made, allowed the development of new polymer materials, renewable 100 % were called biopolymer. The poly acid lactic is doubtless the most promising of them. Of natural origin, this polyester is synthetized from food rich in starch such as the corn, the beet or the potato. His biodegradable character offers him a wide range of applications in many field as medicine, building, car industry, biomedical or textile clothing. This work consists in studying the structure and the texture of the mixed isomer (PDLA) and to determine the incidence of its morphology on the mechanical properties required for textiles applications.We have by spectral methods, characterized the polymer ,in arder to determine, the molecular weight,composition, and monomers distribution, very important parameter, having a strong influence on the mechanical properties of the polymer, in particular the thermal stability or the resistance in the hydrolysis. Our experiments led on the thermal stability of the polymer reveal that the polymer may hydrolyser under the combined effect of temperature, moisture and by the pH, then, a decrease of the molecular weight, thus, a Joss ofmechanical properties of the fiber.The PLA is also a polymer which can be dye only with certain disperses dyes under particulars conditions.The study of the kinetics of fixation of three disperses dyes scattered on PLA fiber permit to establish a relation between the structure of the disperses dyes and its dyeing properties.

A produção de PHAMCL por Pseudomonas putida IPT 046 em cultivo contínuo sob limitação múltipla de nutrientes foi estudada, utilizando glicose e frutose como fontes de carbono. O estudo da limitação em nitrogênio, fósforo e simultânea de nitrogênio e fósforo para indução de acúmulo de polihidroxialcanoato, apontou que maiores valores de polímero foram acumulados quando fósforo foi o nutriente limitante (70%). Limitação em nitrogênio resultou no máximo em 40% de polímero. A limitação simultânea de nitrogênio e fósforo resultou em 68% de polímero, menor consumo de oxigênio para gerar células e maior fator de conversão de fonte de carbono em polímero (0,19 g/g) quando comparado com a limitação em fósforo, 0,16 g/g, ou à limitação em nitrogênio, 0,10 g/g. Oxigênio utilizado para manutenção das células não dependeu do tipo de limitação e dos valores das vazões específicas de alimentação. Um modelo metabólico foi proposto, ajustando aos dados experimentais na condição de limitação em nitrogênio. / Multiple nutrient limited growth of Pseudomonas putida IPT 046 was studied in chemostat culture from glucose and fructose as carbon source. Nitrogen, phosphorus and both nitrogen and phosphorus limitation was performed in order to accumulate medium-chain-length polhydroxyalkanoate. Phosphorus limitation resulted in higher polymer content accumulated (70%). Nitrogen limited assays achieved only 40% of polymer. Nitrogen and phosphorus simultaneous limitation resulted in 68 % polymer content, less oxygen demand to synthesize cells and best yields of carbon into polymer (0,19 g/g) when compared with 0,16 g/g on phosphorus limitation and 0,10 g/g on nitrogen limitation. Oxygen demand for maintenance is the same, independent of limitation strategy or dilution rate performed. A metabolic pathway model was proposed and fitted with nitrogen limited experimental data.

Orientador: Rui Seabra Ferreira / Resumo: Desenvolvido em 1990 por um grupo de pesquisadores do Centro de Estudo de Venenos e Animais Peçonhentos (CEVAP), no Estado de São Paulo, Brasil, o Biopolímero de Fibrina (BPF) possuía o principal objetivo de ser um adesivo à base de fibrina sem o uso de sangue humano, a fim de evitar a transmissão de doenças infecciosas por meio deste insumo. Após diversas pesquisas com o BPF, comprovou-se não somente sua capacidade adesiva, como também sua ação coagulante, sua ação como auxiliar no reparo ósseo e cartilaginoso e sua função como arcabouço para células-tronco mesenquimais (CTMs), devido ao fato de que o BPF possui uma estrutura tridimensional adequada. Em estudos recentes e ao exercer essa função, tal material não afetou o microambiente biológico das células, ou seja, permitiu a adesão, proliferação e diferenciação celular, e aderência e crescimento destas. Tais características, apresentadas pelo BPF, são desejáveis na maioria dos biopolímeros utilizáveis, o que ressalta a importância do aprofundamento das pesquisas com BPF e suas interações em experimentos in vivo. Assim, no capítulo 1 realizamos uma ampla revisão na literatura sobre biopolímeros de fibrina, células-tronco e reparação de tecido ósseo. No capítulo 2 é apresentado o artigo científico “Arcabouço de fibrina para células-tronco mesenquimais como potencial osteogênico”. / Abstract: Developed in 1990 by a group of researchers from the Center for the Study of Venomous and Poisonous Animals (CEVAP) in the State of São Paulo, Brazil, the Fibrin Biopolymer (GMP) had the main objective of being a fibrin-based adhesive without the use of human blood in order to avoid the transmission of infectious diseases by means of this input. After several investigations with BPF, it was verified not only its adhesive capacity, but also its coagulant action, its action as an aid in bone and cartilage repair and its function as a framework for mesenchymal stem cells (MSCs), due to the fact that the BPF has an adequate three-dimensional structure. In recent studies and in carrying out this function, such material did not affect the biological microenvironment of the cells, that is, it allowed cell adhesion, proliferation and differentiation, and adhesion and growth of these cells. These characteristics, presented by BPF, are desirable in most usable biopolymers, which underscores the importance of deepening GMP research and its interactions in in vivo experiments. Thus, in Chapter 1 we conducted a broad review in the literature on biopolymers of fibrin, stem cells and repair of bone tissue. In chapter 2 the scientific paper "Fibrin scaffold for mesenchymal stem cells as osteogenic potential" is presented. / Doutor

Novos materiais obtidos a partir de polímeros biodegradáveis são uma alternativa para a redução do impacto ambiental causado pelo uso excessivo de polímeros derivados do petróleo. Atualmente, vários estudos têm sido realizados na busca de matéria-prima para o desenvolvimento de filmes biodegradáveis, com boa viabilidade técnica e econômica. Dentre estas matérias-primas, destacam-se as que são provenientes de fontes renováveis, de baixo custo e que tenham grande importância econômica e ambiental, como, por exemplo, o amido, as argilas, e a quitosana. Nos filmes que preparamos, adicionamos como plastificante a glicerina, um subproduto do biodiesel, e que contribui para maior estabilidade térmica dos filmes, em conjunto com o amido. O propósito deste trabalho foi o preparo de um biopolímero a base de quitosana e argila com propriedades de nanocompósitos, pois estes materiais costumam exibir propriedades físico-químicas diferenciadas em relação a outros materiais, devido à redução no seu tamanho. Sendo assim, através do estudo e comparação de duas argilas esmectíticas sódicas naturais, Bentogel e Corral, pôde-se observar o comportamento dos filmes formados em presença de amido e glicerina. Os filmes obtidos, através do método de dispersão em solução do polímero, foram caracterizados através das técnicas de DRX, MEV, IV, TG e DSC. Os resultados obtidos mostraram a formação de filmes nanocompósitos esfoliados de boa estabilidade térmica. / New materials made from biodegradable polymers are an alternative to reducing the environmental impact caused by excessive use of polymers derived from petroleum. Currently, several studies have been conducted in search of raw material for the development of biodegradable films, with good technical and economic feasibility. Among these materials, we highlight those that are from renewable resources, low cost and have great economic and environmental importance, such as, starch, clays, and chitosan. In preparing films, we added glycerol as a plasticizer, a byproduct of biodiesel, and contributes to better thermal stability of the films, together with starch. The purpose of this study was the preparation of a biopolymer based on chitosan and clay nanocomposites properties, because these materials tend to display different physico-chemical properties compared to other materials because of the reduction in size. Thus, through the study and comparison of two natural sodium smectite clays, Bentogel and Corral, it was observing the behavior of films formed in the presence of starch and glycerol. The films obtained by the method of dispersion in the polymer solution, were characterized by techniques of XRD, SEM, FTIR, TG and DSC. The results obtained showed the formation of exfoliated nanocomposites films and good thermal stability.