Beside designing the graphical interface of mobile applications, mobile phones and their built-in sensors enable various possibilities to engage with digital content in a physical, device-based manner that move beyond the screen content. So-called mobile device-based interactions are characterized by device movements and positions as well as user actions in real space. So far, there is only little guidance available for novice designers and developers to ideate and design new solutions for specic individual or collaborative use cases. Hence, the potential for designing mobile-based interactions is seldom fully exploited. To address this issue, we propose a design kit for mobile device-based interaction techniques following a morphological approach. Overall, the kit comprises seven dimensions with several elements that can be easily combined with each other to form an interaction technique by selecting at least one entry of each dimension. The design kit can be used to support designers in exploring novel mobile interaction techniques to specic interaction problems in the ideation phase of the design process but also in the analysis of existing device-based interaction solutions.

In mixed-focus collaboration, group members create content both individually as a kind of groundwork for discussion and further processing as well as directly together in group work sessions. In case of individual creation, separate documents and contents need to be merged to receive an overall solution. In our work, we focus on mixed-focus collaboration using mobile devices, especially smartphones, to create and merge content. Instead of using emails or messenger services to share content within a group, we describe three different mobile device-based interaction techniques for merging that use built-in sensors to enable ad-hoc collaboration and that are easy and eyes-free to perform. We conducted a user study to investigate these merging interactions. Overall, 21 participants tested the interactions and evaluated task load and User Experience (UX) of the proposed device-based interactions. Furthermore, they compared the interactions with a common way to share content, namely writing an email to send attached content. Participants gave valuable user feedback and stated that our merging interaction techniques were much easier to perform. Furthermore, we found that they were much faster, less demanding, and had a greater UX than email.

The present paper examines possible changes in temporal urban diversity caused by the COVID-19 pandemic in Stockholm and Uppsala metropolitan areas. In addition to general changes in diversity, potential differences of diversity levels at locations with varying socioeconomic characteristics are examined. The diversity levels are calculated based on mobile phone data and defined by the inflow and distribution of individuals to locations. The time frame involves eight study dates and extends from January to April 2020. The paper reaches the following conclusions. (1) Diversity levels display a general decline during the pandemic, with one exception - Easter Holidays. (2) Individuals residing in areas with high proportions of highly educated individuals or visible minorities experience a decrease in diversity whereas the opposite is true for areas with high proportions of low-income earners or senior citizens (3) The increase in diversity in the two last mentioned areas, which are located in remote parts of the metropolitan area, coincide with decreasing levels of diversity in the central parts of the metropolitan area. It is possible that changes in diversity levels in these areas can be explained by changes in general behavioural trends, e.g. incentives to avoid crowded city center areas.

Le travail présenté dans cette thèse a pour objectif l’étude des conditions nécessaires pour évaluer l'exposition radio fréquence (RF) due aux téléphones mobiles dans un scenario d’utilisation réelle et le développement d’une méthodologie permettant de prédire et de comparer les téléphones mobiles en fonction de leurs expositions RF réelles. Les téléphones mobiles sont caractérisés par leur débit d'absorption spécifique (DAS) et leur performance en émission et en réception (over-the-air, OTA). En utilisant le DAS et la puissance totale rayonnée (PTR), un indice d'exposition appelée l'indice SAROTA a été proposé précédemment afin de prévoir l'exposition réelle des téléphones mobiles. L’indice SAROTA sert ainsi de métrique permettant de comparer les téléphones mobiles. Afin de déterminer expérimentalement l’exposition réelle aux RF, plusieurs téléphones avec des modifications logicielles permettant d’enregistrer les paramètres du réseau, sont utilisés pour l’étude qui est menée comme suit : (a) caractérisation des outils et des ressources disponibles pour effectuer des mesures ciblées, (b) identification des ressources radio et des paramètres importants pour effectuer ces mesures, (c) étude de la mise en œuvre effective du mécanisme de contrôle de puissance observé dans un réseau mobile réel pour différents niveaux et de qualités du signal reçus, (d) étude de la corrélation entre la performance OTA des téléphones mobiles et l’étendue effective du contrôle de puissance appliquée par le réseau, (e) comparaison entre la valeur réelle de l’exposition et la valeur prédite en utilisant l’indice SAROTA. Comme les défis logistiques et techniques sont plus difficiles à surmonter pour les mesures dans un environnement multi-trajets extérieur, les expériences ont été limitées à des environnements intérieurs pour assurer une meilleure répétabilité des mesures. Lors d’une première phase de l’étude, la stabilité de l’environnement intérieur a été évaluée. Lors d’une deuxième phase, l’influence de la main sur le DAS et la PTR des téléphones mobiles ainsi que sur l’évaluation de l’exposition réelle prédite par l’indice SAROTA a été étudiée. Lors d’une troisième phase, un ensemble de téléphones mobiles identiques ont été modifiés et des mesures effectuées pour vérifier que l’indice SAROTA permet bien de prédire l’exposition réelle des personnes. / The work presented in the thesis is directed towards addressing the requirement for determining the radio frequency (RF) exposure due to mobile phones under typical usage/ real-life scenarios and also to develop a method to predict and compare mobile phones for their real-life RF exposure. The mobile phones are characterized for their specific absorption rate (SAR) and for transmit and receive performance given by the over-the-air (OTA) characterization. Using the SAR and the total radiated power (TRP) characterization, an exposure index referred to as the SAROTA index was previously proposed to predict the real-life exposure due to mobile phones which would also serve as a metric to compare individual phones. In order to experimentally determine the real-life RF exposure, various software modified phones (SMP) are utilized for the study. These phones contain an embedded software capable of recording the network parameters. The study is undertaken in the following order: (a) Characterization of the available tools and resources for performing targeted measurements/experiments, (b) identifying the important radio resource parameters and metrics to perform the targeted measurements, (c) investigation of the actual implementation of the power control mechanism in a live network for various received signal level and received quality environments, (d) investigating the correlation of the over-the-air performance of the mobile phones and the extent of actual power control realization, (e) comparing the actual exposure and the real-life exposure as predicted by the SAROTA index. Based on the logistical and technical challenges encountered, the experiments were restricted to indoor environments to enable repeatability. During the first phase of the study, the stability of the indoor environment was evaluated. During the second phase, the influence of hand phantom on the SAR and TRP of the mobile phones and the capability of the SAROTA index to predict the exposure was investigated. Further developing on the insights from the hand phantom experiments, in the third phase, a set of identical software modified phones were externally modified to alter the TRP performance and the methodology to determine the real-life exposure and also verify the capability of the SAROTA index to predict the exposure levels was investigated. The experiments demonstrate that the SAROTA index is capable of predicting the real-life exposure and comparing the mobile phones.

Overweight and obese children have increased risks for multiple preventable diseases and conditions which can impair their physiological health and significantly increases the overall cost of their healthcare. Free mobile applications and technology for weight loss, dietary tracking, and physical activity may be quite useful for monitoring nutritional intake and exercise to facilitate weight loss. If so, nurses are well positioned to recommend such tools as part of their efforts to prevent childhood obesity and help children and parents better manage childhood obesity when it is present. However, there are no guidelines that nurses can use to determine what applications or technologies are most beneficial to children and their parents. The purpose of this project is to develop such guidelines based on a review of the scientific literature published in the last 5 years. Articles regarding healthy-lifestyle promoting mobile applications and technological approaches to health and fitness interventions were identified by searching articles indexed by CINAHL, Psychinfo, Medline, ERIC, IEEE Xplore, and Academic Search Premier. Identified articles were assessed using Melnyk’s hierarchy of evidence and organized into tables so that implications for research and suggestions for practice could be made.

Syftet med det här examensarbetet har varit att utveckla och utforma en mobilhållare för bilar. En mobilhållare kan ha många funktioner, och med dagens lag om att kommunikationsutrustning inte får störa vid framförande av fordon får den en extra viktig roll. Hållaren har utvecklats för att möjliggöra enkel användning genom en kombination av flera användarvänliga funktioner. Några exempel på funktioner är enkel montering och demontering av mobiltelefon, automatisk sammankoppling med bil samt trådlös laddning. Genom en strukturerad produktutvecklingsprocess, där beprövade metoder har använts för att identifiera krav, generera koncept och välja koncept, har ett antal koncept skapats som slutligen sållats ut till en slutlig vinnare. Exempel på använda metoder och verktyg är intervjuer och House of Quality för kravidentifiering, TRIZ Effects Database och Merlin för konceptgenerering samt Concept screening och Concept scoring för konceptval. Det valda konceptet har därefter genomgått nödvändigt konstruktionsarbete för att skapaCAD-modeller, utföra FE-analyser samt 3D-printa en prototyp. Det slutliga konceptet uppfyller kravet om enkel användning genom bland annat enkel enhands montering och demontering av mobiltelefon. Lösningen fungerar även med en stor variation av mobiltelefoner utan behov av att göra inställningar. Konceptet är utformat och förberett för att i framtida arbete integrera olika trådlösa tekniker såsom NFC och Qiladdning. Vidare arbete krävs bland annat gällande konstruktionens hållfasthet, materialval och uppfyllande av lagkrav. / The objective of this thesis has been to develop and design a mobile phone holder for cars. A mobile phone holder can fulfil many purposes, and with the legislation today stating that communication equipment should not interfere when driving a vehicle, this type of product becomes extra important. The holder has been developed to enable simple use through acombination of user friendly functions. A few examples of functions are; easy mounting and demounting of mobile phone, automatic connection to car and wireless charging. Through a structured product development process, where tested methods have been used to identify requirements, generate concepts and choosing concept, an amount of concepts have been created and finally narrowed down to one final winner. Examples of methods and tools that has been used is interviews and House of Quality for identifying requirements, TRIZ Effects Database and Merlin for generating concepts and finally Concept screening and Concept scoring for the selection. The chosen concept has thereafter gone through necessary construction work for creating CAD-models, performing FE-analysis and 3D-printing a prototype. The final concept meets the requirement of easy use through simple one-hand mounting and demounting of mobile phone. The solution also works with a wide variety of mobilephones without the need to make adjustments. The concept is designed and prepared for integrating techniques such as NFC and Qi-charging in future work. More work needs to be done regarding the constructions strength, choice of material and fulfilling of laws before proceeding any further.

Denna rapport presenterar ett proof-of-concept avseende inomhuspositionering, baserat på Bluetooth-fyrar och mobiltelefoner, kombinerat med ett system för besökshantering. Detta mot bakgrunden av ett önskemål om att underlätta interaktionen mellan lärare och studenter på Malmö högskola.Till följd av att viss verksamhet på Malmö högskola flyttat till nya lokaler har lärarnas arbetsplatser förändrats, vilket lett fram till att studenterna har svårt att dels lokalisera tillgängliga lärare och dels initiera besök utan att störa andra lärare. Genom att upprätta en prioriterad kravspecifikation utifrån MoSCoW-metoden, baserat på intervju- och enkätsvar från lärare, identifieras kraven till ett system för positionering av lärare samt tillhörande system för besökshantering.Utifrån Pahl’s utvecklingsprocess för framtagning av en teknisk artefakt analyseras och utvärderas olika lösningsalternativ för inomhuspositionering, vilket leder fram till ett förslag avseende en prototyp. Prototypen avser symbolisk positionering i ett system för närhetsdetektering utifrån fördefinierade zoner, baserat på aktiva mobiltelefoner och passiva Bluetooth-fyrar. Slutligen implementeras framtagen prototyp för inomhuspositionering, i kombination med ett system för besökshantering, för att visa på dess genomförbarhet. Detta i form av en summerad systemvy som även inkluderar en molnbaserad databas, ett webbgränssnitt och två Android-applikationer. / This report presents a proof-of-concept regarding indoor positioning based on Bluetooth beacons and mobile phones, combined with a system for visitor management. This against the background of a desire to facilitate the interaction between teachers and students at Malmö University.As a result of that Malmö University moved to new facilities, the teachers' workplaces changed, which led to students having difficulty locating available teachers and initiate visits without disturbing other teachers. By establishing a prioritized requirement specification based on MoSCoW method, which is a result of interviews and survey responses from teachers, the requirements are identified for a system for the positioning of teachers and related systems for visitor management.Based on Pahl's development process for the preparation of a technical artifact, some different solutions for indoor positioning is analyzed and evaluated, leading to a proposal regarding a prototype. The prototype relates to symbolic positioning in a system for proximity detection by predefined zones, based on active mobile phones and passive Bluetooth beacons. Finally, the prototyp for indoor positioning is then implemented in combination with a system for visitor management to demonstrate its feasibility. This in the form of a summed system view that includes a cloud-based database, a web interface and two Android applications.

In collocated collaboration, applied methods and technologies to support the collaboration process mainly comprise either analog paper and pen methods, large display applications or the usage of several laptops. Whereas paper and pen are easy to use, they impair the digital documentation and further editing. Large displays are expensive, stationary, and depend on speci_c environments. Furthermore, laptops build physical barriers between people, which impedes face-to-face communication. This leads to the fact that direct digitization is still not often performed in collocated collaborative scenarios, although it would be useful for further processing or permanent storing of created content.To address advantages of analog media, especially small size and high ubiquity, and eliminate the disadvantages, namely the lack of direct digitization, we aim at applying mobile devices to collocated collaboration. To contribute to the development of future collaboration tools, we derive and propose concrete design goals for applying mobile devices in collocated mixed-focus collaboration.

Mobiltelefoner har utvecklats i snabb takt över åren, från ett nytt koncept till en vardaglig självklarhet för många i bägge personlig och professional fattning. Efter smartphonens myntning i 1994 med IBM Simon Personal Communicator har mobiltelefonen evolveras i många olika riktningar. 2013 kom den först smartphonen med välvd skärm, Samsung Galaxy Round, vilket påbörjande en ny trend av böjda smartphones. Denna studie undersöker användaracceptans av den senaste typen av välvd skärm, sidoböjning, utifrån ett perspektiv av mänskliga nöjen. Studien föreslår att innovationen av sidoböjning inte avnjuts pragmatiskt utan idealistiskt, med fokus på adoptörens ideologiska och sociala begär. Innovationens framtid och utspridning utöver samhället slutdras som osäkert, med förslag på framtida forskning att vidareutveckla ämnets kunskapsbas. / Mobile phones have developed rapidly over the years, from a novel concept to an typical day certainty for many in both personal and professional use. Following the advent of the smartphone in 1994 with the IBM Simon Personal Comunicator, the mobile phone has evolved in a number of directions. In 2013, the Samsung Galaxy Round was launched, the first smartphone featuring a curved display, sparking a new trend of curved-display smartphones. This study investigates the user acceptance of the latest type of curved displays, curved sides, from a perspective of human pleasures. The studie suggests the innovation of curved sides is not enjoyed pragmatically, but idealistically, with a focus on the adopter’s ideological and social desires. The future of the innovation and its diffusion throughout society is concluded to be uncertain, with suggestions of future research to further develop the subject’s base of knowledge.

生物學的互利共生，探討兩生物體生活在一起的交互作用，互利共生雙方成員都得到好處，維持持續性的關係。由於環境不斷在變動，使得兩生物體必須共同學會適應環境，持續共生行為。設計服務產業中的供應商及市場上顧客，有如互利共生的雙方，而服務產業的變遷及新科技的注入，為這個環境加入許多不確定性。設計團隊如何利用服務科學之觀點從顧客角度建立互利共生之設計流程，遠瞻市場脈動和顧客建立長久的關係，是本研究要探討的議題。近幾年來工業設計逐漸浮出檯面。箇中翹楚，莫過於「手機設計」。過去通話是手機最基本的功能。現在，因為功能的跨界設計，讓手機不再只是一個移動式的話筒。本研究從設計的流程切入，探究工業設計團隊在初期進行創意構思到概念構成，及最後設計商品化的部分，如何使用互利共生與服務科學原則建立相關分析模型進行設計流程有效管理，使得設計師更瞭解市場和消費者的需求，並以消費者為尊的觀念，讓客製化的程度提高，建立一使得顧客與設計團隊間的交互作用得以持續。 / In service exchange, both providers and customers are involved in shaping the continuum of value co-production. Inspired by the symbiosis concepts, service exchange engaged by providers and customers can be regarded as the unfolding of mutually beneficial interactions between two species. The providers and customers in design service industry (e.g., industrial design) are the analogy as two organisms in mutualism. In this industry, there are many uncertain factors to consider and it is important for a design team to establish a mutualism relationship with their customers and unfold a design service process which can meet consumers’ expectations. This paper takes the design service of mobile phones as an example and presents an analytical model of mutualism-based idea management characterized with the principles of symbiosis concepts and service science. The model is unfolded with three symbiosis analytic tasks (concept definition, idea visualization, and commercialization) and achieves a design service process regarding the points of view of the customers in order to improve customization.