No description available.

För att minska energiförbrukningen i Sverige krävs att befintliga byggnaderen ergieffektiviseras. Det finns även befintliga lokaler i landet som är i behov av en sänkt energiförbrukning. Det sker ständigt initiativ kring arbete med energieffektivisering av framför allt bostadshus. När energiförbrukning ska sänkas i industrilokaler läggs fokus på att minska energiåtgången i de invändigaprocesserna men inte i det omgivande klimatskalet där transmissionen utgör en stor del av energiläckaget. Syftet med arbetet är att öka kunskapen om energieffektiva åtgärder vid renovering av klimatskal hos industrilokaler. Målet ä ratt ta fram olika lösningsförslag som reducerar energiläckaget vid renovering av befintliga industrilokaler anpassat till projektet Dalern. Projektet Dalern är en byggnad uppförd på Åland vid 1990 som används vid fallstudie av förbättrade tekniska lösningar. I rapporten behandlas följande tre frågeställningar. Vilka metoder finns för att energieffektivisera klimatskal hos industrilokaler? Vilka alternativ är mest energieffektiva? Vilka tekniska lösningar skulle fungera i projektet Dalern? För att besvara dessa frågeställningar har en litteraturstudie över vanliga, energisparande renoveringsmetoder utförts. Dokumentstudier har genomförts av referensobjektet Dalerns ritningar. Studien har resulterat i en fallstudie där olika åtgärder beräknats för att se vilka potentialer det finns att energieffektivisera klimatskalet. De resultat som framkommit av arbetet är att det finns många olika metoder att energieffektivisera framför allt husbyggnader. De åtgärder som ger en mest energieffektiv besparing är framför allt byte av fönster och dörrar samt tilläggsisolering av tak och väggar. I fallstudien har olika åtgärder beräknats med handberäkning och med hjälp av energiberäkningsprogrammet VIP-Energy. Byggnadsdelar, möten mellan byggnadsdelar och hela referensobjektets energianvändning har beräknats. Eftersom rapportens tyngdpunkt är energieffektivisering har värmeövergång, köldbryggor och specifik energianvändning beräknats med omsorg. Andra faktorer som tagits hänsyn till är fukt, lufftäthet och brand. Uträkningen i energiberäkningsprogrammet har resulterat i att referensobjektets genomsnittliga värmeövergång kan minska med cirka 30 % vid användning av rätt åtgärder. Referensobjektets specifika energianvändning kan minskas med cirka 33% efter åtgärder som enbart berör klimatskalet. / It’s necessary to make existing buildings more energy efficient in order to reduce the energy consumption in Sweden. There are also existing premises in the country which are in need of reduced energy consumption. Initiatives on energy efficiency takes place continuously. Particularly in residential buildings. When the energy consumption is to be reduced in industrial facilities, the focus is on reducing the consumption of the internal processes. The building envelope where the transmission is a major energy leakage is often forgotten. The purpose is to increase the knowledge of energy-efficient renovation of industrial facilities. The project Dalern is an industrial facility which was built in Åland in 1990. The building is used in a case study of improved technical solutions. Three following questions are covered by this report. Which methods are available to make the building envelope of industrial facilities more energy efficient? Which options are most energy efficient? Which technical solutions would work in the project Dalern? A literature study of common, energy-saving renovation techniques has been implemented to answer the questions above. Document studies have also been implemented on the project Dalern. The document studies have resulted in a case study where different actions have been calculated to see what potential there is to improve the energy efficiency of the building envelope. The result that has emerged from the work is that there are many different methods to improve energy efficiency, especially in residential buildings. The actions that provide the most energy efficient savings are primarily replacement of windows and doors as well as additional insulation of walls and roofs. In the case study, various actions have been calculated using hand calculations and with use of an energy calculation program called VIP-Energy. Structures, meetings between building components and the entire reference object’s energy consumption have been calculated. Heat transfer, thermal bridges and specific energy has been calculated with care since the report’s emphasis is energy efficiency. Other factors that has been taken in consideration are moist, air leakage and fire. The calculation in VIP-Energy has resulted in the reference object’s average heat transfer can be reduced by about 30 % when using the correct actions. The reference object’s specific energy consumption can be reduced by approximately 33 %. These reductions were affected only by actions that concern the building envelope.

[pt] Um dos maiores desafios na perfuração das rochas carbonáticas, situadas a grandes profundidades, é superar as baixas taxas de penetração que vem sendo obtidas na perfuração de poços verticais e direcionais. Para vencer este desafio, um grande esforço vem sendo desenvolvido em várias linhas de pesquisa, tanto no desenvolvimento de novos conceitos de brocas como na seleção de um sistema de perfuração que apresente um melhor desempenho. Para atingir este objetivo, estão sendo priorizados procedimentos e sistemas de perfuração que apresentem menores níveis de vibração, pois este fenômeno além de reduzir a eficiência da perfuração, também compromete o tempo de vida útil dos equipamentos e, por consequência, acarreta a redução da confiabilidade do sistema e eleva o custo por metro da perfuração. Por conseguinte, novas tecnologias de brocas e sistemas de perfuração estão em desenvolvimento e, dentre as novas tecnologias, podemos diferenciar aquelas que promovem melhorias nas tecnologias convencionais e as tecnologias francamente inovadoras, aquelas que utilizam novos mecanismos para cortar ou fragilizar a rocha. Dentre as tecnologias inovadoras, a perfuração assistida por laser é uma das mais promissoras, nesta versão o feixe da energia radiante tem a função principal de fragilizar a rocha, facilitando o avanço da perfuração. Esta dissertação tem por objetivo realizar uma avaliação das possibilidades de aplicação da tecnologia laser na perfuração de rochas. O meio através do qual o laser deverá atuar nas aplicações futuras é analisado sobre o enfoque das suas propriedades físico-químicas. Dessa forma, o conhecimento da interação com o fluido de perfuração é o ponto de partida para a análise de viabilidade. Inicialmente, análises de absorção ótica foram realizadas em alguns tipos de fluido utilizados na indústria do petróleo e, na sequência, foram realizados testes de bancada com um dispositivo eletro-mecânico, especialmente desenvolvido, para servir de base para o laser, com potência máxima de 1500 W, direcionado sobre amostras de rochas carbonáticas. A análise de absorção ótica tem por objetivo compreender melhor o processo de interação do laser com o fluido de perfuração. Os testes de absorção ótica foram realizados para avaliar a absorção da luz, na faixa de comprimento de onda entre 800 nm até 1200 nm. A partir destas informações foi dado o primeiro passo no conhecimento da interação com o fluido de perfuração. Na seqüência da abordagem, um resumo, em nível de pesquisa bibliográfica é apresentado com os estudos, análises e testes de bancada já realizados por vários pesquisadores para verificar o estágio de desenvolvimento desta tecnologia inovadora. A partir deste conhecimento, será possível fazer uma inferência sobre as reais possibilidades desta tecnologia e iniciar um levantamento preliminar sobre os pontos considerados críticos para a sua aplicação, no cenário de perfuração de um poço de petróleo. O cenário de perfuração, como se sabe, é um ambiente agressivo, sujeito a altas vibrações, temperaturas e pressões elevadas. Para concluir, serão apresentados os resultados obtidos em teste de bancada com dispositivo especificamente construído para a fundamentação das conclusões da dissertação. Dentre os aspectos mais relevantes, podemos mencionar: a determinação da durabilidade do sistema, considerando a resistência da lente de focalização ao aquecimento provocado pelo laser e, também, uma avaliação da eficiência do processo sob o ponto de vista do valor obtido para a energia específica. Em resumo, o objetivo final dessa dissertação é o de concentrar em um documento as informações mais atualizadas sobre a utilização do laser na perfuração de rochas e apresentar uma análise, ainda que preliminar, sobre os possíveis pontos de melhoria que permitam viabilizar esta tecnologia no futuro. / [en] One of the biggest challenges in drilling the carbonate rocks located at great depths is to overcome low penetration drilling rates that have been obtained in vertical and directional wells. To overcome this challenge, a great effort is being developed on multiple lines of research. All of them are focused in new concepts of drilling procedures and the selection of a drilling system that presents a better performance. To achieve this goal, new procedures are being designed and drilling systems with lower vibration levels are under development. Vibration reduces the efficiency of drilling, also decreases the lifetime of equipment and consequently causes a reduction in reliability of all system and raises the drilling costs. Consequently, new drill bit technologies and drilling systems are being developed and, among the new technologies we can differentiate those that only promote improvements in conventional technologies and those innovative technologies, in which new mechanisms to cut or weaken the rock are used. The drilling assisted laser is one of the most promising mechanism in which the radiant energy beam has the primary function to weaken the rock increasing the performance of drilling process. This dissertation aims to perform an assessment of the possibilities of laser technology in rock drilling applications. The laser will have to pass through the drilling fluid in the future applications so it is very important to understand their physicochemical properties and their mutual interaction. For this reason, the knowledge of the interaction with the drilling fluid is the starting point for this work. First of all, it will be accomplished an analysis of optical absorption in some types of fluid used in the oil industry. After that, it will be performed bench testing with an electro-mechanical device that will support a laser whose maximum power can reach 1500 W and it will be pointed to carbonate rock samples. The optical absorption analysis aims to better understand the interaction of the laser with the drilling fluid. The optical absorption tests are performed to evaluate the absorption of light in the wavelength range from 800 nm to 1200 nm. From this information, it will be taken the first step to understand the interaction with the drilling fluid, which is the starting point for the feasibility study of the use of lasers. Following the approach, a literature review will be presented with the studies, analysis and bench testing already conducted by various researchers to check the stage of development of this new technology. Taking into account this knowledge, it will be possible to make an initial approach about the actual possibilities of this technology and initiate a preliminary survey on the questions that are critical to its application in a drilling scenario in the well construction, an aggressive environment which is subject to high vibrations, high temperatures and pressures. To conclude, we present the results obtained in bench testing with device specifically built for supporting the conclusions of the dissertation. Among the most relevant aspects, we can mention the durability of the system, considering the focusing lens lifetime under the heating effects caused by the laser. Another point, it is to make an evaluation of the performance of drilling process, considering the specific energy. In summary, the ultimate goal of this dissertation is to concentrate in a single document the most current information about the use of laser drilling and present an analysis, though preliminary, about the possible improvement points that will allow the feasibility of this technology in the future.

La desintegració és una etapa important en la recuperació de paper vell, ja que té importants conseqüències en consum d'energia i en el comportament de les etapes posteriors.Per això els objectius es centren en analitzar la desintegració des del punt de vista del temps de desintegració, els aspectes energètics, modelització de la màquina de desintegració utilitzada i anàlisi dels factors de cisallament calculats com a mesura global de les forces implicades en la desintegració. Els autors que hi han treballat donen diferents explicacions a aquestes forces. Fins avui només s'ha pogut avaluar qualitativament la influència que tenen cada un dels mecanismes en el temps necessari per a desintegrar i en el consum energètic. Les característiques reològiques de les suspensions papereres, i el seu comportament no newtonià tenen una clara influència en el consum energètic i les forces de desfibrat en el desintegrador.Els experiments de desintegració s'han realitzat en un púlper convencional, amb tres tipus de paper recuperat: paper estucat d'alta qualitat imprès offset (PQ), paper revista estucat imprès en color (PR), paper blanc imprès en impresora làsser (PF).Anàlisi del temps de desintegracióPer cada un del papers estudiats (PQ, PR i PF), les fraccions màssiques des de 0.06 fins a la màxima que estat possible per cada paper (de 0.14 a 0.18), i a dues velocitats d'agitació diferents, s'ha determinat el temps de desintegració (tD) fins a aconseguir un índex de Sommerville de 0.01%. S'obté que en augmentar la fracció màssica disminueix potencialment el temps de desintegració. S'ha estudiat la velocitat de desintegració, la producció teòrica del púlper en cada cas, i la seva relació amb les forces d'impacte i de fregament que produeixen la desintegració.Aspectes energèticsEl consum específic d'energia (SEC), definit com l'energia consumida per a desintegrar 1 kg de paper recuperat, disminueix molt en augmentar Xm, ja que a més de disminuir l'energia consumida en cada desintegració, el contingut en paper és més elevat. Pel disseny de desintegradors, cal tenir en compte que en augmentar Xm i en augmentar la velocitat, sempre augmenta la potència consumida. Però així com els beneficis de treballar a Xm alt són de 10 vegades en termes de SEC i de producció, l'augment de potència és només de l'ordre de 2 vegades la necessària respecte de la Xm baixa. Viscositat aparent i energia de fluiditzacióS'estudia la relació entre el temps de desintegració, les forces de fregament i els valors de viscositat aparent de la bibliografia. Per cada paper i velocitat s'ha observat que el consum específic d'energia disminueix en funció de la viscositat aparent.Reologia del púlperUtilitzant el mètode de Metzner i Otto (1957) per determinar la viscositat aparent mitjana de les suspensions papereres, modificat per Roustan, s'ha caracteritzat el pulper mitjançant el model: Np= K· Rex·Fry S'han utilitzat dissolucions de glicerina com a fluid newtonià per a calcular les constants d'ajust, i a partir d'aquí, aïllar la viscositat aparent en funció de la potència neta i els paràmetres d'agitació.La viscositat aparent, d'acord amb Fabry (1999) es substitueix pel concepte de factor de cisallament.Factor de cisallamentCalculat el factor de cisallament per a cada paperot i condicions d'agitació, s'ha relacionat amb Xm, SEC, tD, consum de potència, potència instal·lada i fracció cel·lulòsica. El factor de cisallament és un paràmetre útil per a quantificar les forces globals implicades en la desintegració. / Disintegration is an important stage in paper recovery and it has important consequences in energy consumption and in the following stages.The objectives of this thesis are focussed in analyzing disintegration considering disintegration time, power aspects, modelisation of the disintegration machine and analysis of the calculated shear factors as a global measurement of the forces implied in the disintegration.Until now, it has only been possible a qualitative evaluation of the influence of every mechanism in the time necessary to disintegrate the pulp, and in the power consumption.Rheological characteristics of suspensions and their non-Newtonian behaviour it is known that clearly influence power consumption and defibering forces acting during repulping. Disintegration experiments have been made in a conventional pulper, with three types of recovered paper: high quality coated printed offset paper, magazine coated colour printed paper and white laser printed paper.Analysis of disintegration timeTime necessary to achieve a Somerville index of 0.01%, was determined for each paper studied, at mass fractions ranging from 0,06 until the maximum possible for each type of paper (0,14 or 0,18) and at two different agitation speeds. It has been found that when increasing the mass fraction, disintegration time decreases potentially. Disintegration speed and theoretical production of pulp have been studied in each case, and they have been related with friction and impact forces.Power aspects Specific energy consumption (SEC) defined as the energy consumed during disintegration of 1 kg of recovered paper, was reduced with increasing mass fraction (Xm), because the energy consumed during disintegration decreases and the pulp contend in the pulper is higher. And increase of Xm and pulper agitation speed always increases the power consumed. An increase of only 2 times of power consumption (due to working at high Xm) produces benefits in SEC and production of 10 times.Apparent Viscosity and fluidisation energy Relation between disintegration time, friction forces and apparent viscosity were studied. For each paper and speed it has been observed that SEC was reduced when increasing apparent viscosity.Rheology of pulper Using Metzner and Otto methodology to determine average apparent viscosity of suspensions, modified by Roustan, pulper was characterized by means of model Np=K·Rex·Fry. Glycerine dissolutions have been used as Newtonian fluid to calculate constants of adjustment, and from here, apparent viscosity was determined from net power and agitation parameters. Apparent viscosity, in agreement with Fabry, is replaced by the concept of shear factor.Shear FactorOnce calculated the shear factor for each type of paper and conditions of agitation, the values obtained have been related to Xm, SEC, td, power consumption, installed power and cellulose fraction. Shear factor is a useful parameter to quantify the global forces acting in disintegration process.

Philosophiae Doctor - PhD (Chemistry) / Supercapacitors, also known as ultracapacitors or electrochemical capacitors, are considered one of the most important subjects concerning electricity or energy storage which has proven to be problematic for South Africa. In this work, graphene oxide (GO) was supported with platinum, silver and copper nanoparticles anchored with dodecylbenzenesulphonic acid (DBSA) doped polyaniline (PANI) to form nanocomposites. Their properties were investigated with different characterization techniques. The high resolution transmission electron microscopy (HRTEM) revealed GO's nanosheets to be light, flat, transparent and appeared to be larger than 1.5 ?m in thickness. This was also confirmed by high resolution scanning electron microscopy (HRSEM) with smooth surfaces and wrinkled edges observed with the energy dispersive X-ray analysis (EDX) confirming the presence of the functional groups such as carbon and oxygen. The HRTEM analysis of decorated GO with platinum, silver and copper nanoparticles (NPs) revealed small and uniformly dispersed NPs on the surface of GO with mean particle sizes of 2.3 ± 0.2 nm, 2.6 ± 0.3 nm and 3.5 ± 0.5 nm respectively and the surface of GO showed increasing roughness as observed in HRSEM micrographs. The X-ray fluorescence microscopy (XRF) and EDX confirmed the presence of the nanoparticles on the surface of GO as platinum, silver and copper which appeared in abundance in each spectra. Anchoring the GO with DBSA doped PANI revealed that single GO sheets were embedded into the polymer latex, which caused the DBSA-PANI particles to become adsorbed on their surfaces. This process then appeared as dark regions in the HRTEM images. Morphological studies by HRSEM also supported that single GO sheets were embedded into the polymer latex as composite formation appeared aggregated and as bounded particles with smooth and toothed edges.

L'interaction des rayonnements ionisants avec le vivant est marquée par des phénomènes stochastiques importants aussi bien en termes de dosimétrie physique que des effets biologiques induits. Cette thèse aborde trois problématiques de la thérapie et de l'estimation du risque des radiations pour la santé, à l'aide d'outils de modélisation et de simulations Monte Carlo. En effet, des calculs de l'énergie spécifique dans des volumes de différentes tailles ont montré que les amplitudes des fluctuations dépendent fortement de la taille de la cible. Elles sont particulièrement grandes dans le cas des cibles nanométriques. À partir de ces calculs, une étude sur la taille des dosimètres implantables pour le monitorage des traitements de radiothérapie a montré que des dimensions au moins micrométriques sont nécessaires pour assurer des mesures fiables. Les mêmes calculs ont permis l'analyse des effets de faibles doses d'irradiation, notamment la compatibilité de différentes tailles de cibles avec des données expérimentales d'aberrations chromosomiques. Les résultats suggèrent que l'activation du réseau mitochondrial peut être liée au déclenchement de mécanismes de radiorésistance dans les cellules CAL51. Finalement, un nouveau modèle (NanOx) de prédiction de l'efficacité de l'hadronthérapie (radiothérapie par faisceaux d'ions) est présenté et appliqué à la lignée cellulaire V79. Ce modèle est complètement stochastique et intègre les calculs de dosimétrie à plusieurs échelles pour modéliser des effets locaux et non locaux pouvant correspondre respectivement à des lésions de l'ADN et à un stress oxydatif / The interaction between ionizing radiation and living tissues is characterized by stochastic phenomena with non-negligible consequences both in terms of physical dosimetry and induced biological effects. The present work addresses three issues concerning radiotherapy and the estimation of radiation risks for health, by means of modeling tools and Monte Carlo simulations. Indeed, specific energy calculations in volumes of different sizes showed that the level of fluctuations strongly depends on the target size. Such fluctuations are especially high in the case of nanometric targets. Based on these calculations, a study about the size of implantable dosimeters employed in the monitoring of radiotherapy treatments demonstrated that these dosimeters should have at least micrometric dimensions in order to ensure reliable measurements. The same calculations have allowed the analysis of the effects of low doses of radiation, namely the compatibility between different target sizes and experimental data regarding chromosomal aberrations. The results suggest that the activation of the mitochondrial network may be linked to the triggering of radioresistance mechanisms for the CAL51 cell line. Finally, a new model (NanOx) to predict the effectiveness of particle therapy (radiotherapy with ion beams) is presented and applied to the V79 cell line. Such a model is completely stochastic and integrates the dosimetry calculations at multiple scales for modeling local and non-local effects, which can correspond respectively to DNA lesions and cellular oxidative stress

Abstract This thesis deals with the pump schedule optimisation of regional water distribution systems. The aims and the possible applications of the presented methods differ from each other; all of them are intended to solve a particular but realistic problem. The developed techniques use the capacity of the water reservoirs in order to find the optimal pump-schedule of the system. The optimisation task is always deterministic and discrete in time; the stochastic behaviour of the water consumptions is approximated by expected values. A so-called neutral genetic algorithm equipped with new constraint handling is presented first. The method is able to solve the scheduling problems of real-size and complex networks, e.g. the network of Budapest with coupled hydraulic simulations where both variable and fixed speed pumps are in the network. The results are compared to other ones obtained by widely used genetic algorithms and state-of-the-art general purpose optimisation solvers. A dynamic programming based method was also carried out which provides the global optimum of the so-called ’combinatorial’ pump scheduling problems. This modelling type is very common in the industry, which can be used if the operation points of the pumps take discrete values. The basic idea of the method is exploiting the ’permutational invariance’ of the model which results in a perfect discretisation of the state space without any loss of information. An approximate dynamic programming technique is also presented which solves the same type of problems as the formerly mentioned genetic algorithm does. The technique splits the water network model into smaller units, namely into the so-called well fields and the main distribution system. The state space of the main distribution system was further decreased while the quality of the results does not decay. A part of the test examples is the same as in the case of the former presented genetic algorithm; thus, the two methods can be compared. Finally, a small water network fed by a single variable speed pump was investigated. The presented methods are based on the minimisation of the specific energy consumption. The gained results are compared to ones obtained using a high-resolution discrete dynamic program. Novel optimisation techniques for water distribution network pump scheduling were developed in this work. A particular focus was put on the dynamics between pumping, water reservoirs, and water use. The work shows the applicability of the approach via numerous realistic simulation case studies. / Tiivistelmä Työ käsittelee alueellisten vedenjakelujärjestelmien pumppauksen aikataulutuksen optimointia. Esitettyjen menetelmien tavoitteet ja mahdolliset sovellukset poikkeavat toisistaan. Kaikki on kuitenkin tarkoitettu tiettyjen todellisten ongelmien ratkaisemiseen. Kehitetyt tekniikat käyttävät vesivarastojen kapasiteettia optimaalisen pumppausohjelman löytämiseksi. Jokainen optimointitehtävä on aikadiskreetti ja deterministinen, vedenkulutuksen stokastista käyttäytymistä on approksimoitu odotusarvoilla. Ensimmäiseksi työssä esitetään ns. neutraaleja geneettisiä algoritmeja varustettuna rajoitusten käsittelyllä. Menetelmällä voidaan ratkaista skedulointiohjelmia reaalimittakaavaisille ja monimutkaisille verkostoille (esim. Budapestin verkosto varustettuna hydraulisilla simuloinneilla, sekä muuttuvanopeuksisilla että vakionopeuksisilla verkoston pumpuilla). Tuloksia verrataan toisiin yleisesti käytössä olevilla geneettisillä algoritmeilla saatuihin, sekä johtavilla yleiskäyttöisillä optimointitekniikoilla saatuihin tuloksiin. Työssä käytettiin myös dynaamiseen ohjelmointiin pohjaavaa menetelmää, jolla saadaan globaali optimi ns. "kombinatoorisille" pumppauksen aikataulutusongelmille. Tällainen mallinnustapa on hyvin yleistä teollisuudessa. Sitä voidaan käyttää, jos pumppujen toimintapisteet saavat diskreettejä arvoja. Menetelmän perusajatuksena on "permutationaalisen invarianssin" hyväksikäyttäminen, josta seuraa tila-avaruuden virheetön diskretointi ilman informaation häviämistä. Työssä esitellään myös approksimoidun dynaamisen ohjelmoinnin tekniikka, jonka avulla voidaan ratkaista samantyyppisiä ongelmia kuin yllämainituilla geneettisillä algoritmeilla. Tämä tekniikka jakaa vesijohtoverkoston mallin pienempiin yksiköihin: lähdekenttiin ja pääjakeluverkostoon. Pääjakeluverkoston tila-avaruutta voitiin edelleen pienentää ilman, että tulosten laatu heikkeni. Osa käsitellyistä esimerkkitapauksista on samoja kuin edellämainittujen geneettisten algoritmien osalla, joten tuloksia voidaan verrata. Lopuksi tutkittiin pienen muuttuvanopeuksisella pumpulla syötetyn vesijohtoverkoston toimintaa. Esitetyt menetelmät perustuvat ominaisenergiankulutuksen minimointiin. Saatuja tuloksia verrataan korkearesoluutioisella diskreetillä dynaamisella ohjelmoinnilla saatuihin tuloksiin. Työssä kehitettiin uusia optimointitekniikoita vedenjakelujärjestelmien pumppauksen aikataulutuksen optimintiin. Erityisesti työssä keskityttiin pumppauksen, vesitornien ja kuluttajien käyttäytymisen väliseen dynamiikkaan. Työssä osoitettiin tekniikoiden toimivuus realististen esimerkkisimulointien avulla. / Kivonat Jelen doktori disszertáció regionális ivóvízellátó-hálózatok üzemvitel-optimalizációjával foglalkozik. A bemutatott módszerek alkalmazhatósági köre rendszerint eltér egymástól, mindegyik egy-egy speciális, de a való életben is előforduló problémára kíván megoldást nyújtani. A kidolgozott módszerek a medencék tárolókapacitását kihasználva, az optimális szivattyú-menetrendet keresve kívánják megtalálni az adott vízműhálózat üzemviteloptimumát. Az optimalizáció egy időben diszkrét, ugyanakkor determinisztikus feladat megoldását igényli, a vízfogyasztások sztochasztikus viselkedését a várható értékekkel közelítettem. Elsőként egy új mellékfeltétel-kezeléssel ellátott, ún. neutrális genetikus algoritmus bemutatása a cél. A kidolgozott módszer alkalmas nagy, valós méretű (pl. Budapest) és bonyolultságú (kapcsolt hidraulikai szimulációk, frekvenciaváltós és direkt szivattyúk a hálózatban) ivóvízhálózatok napi üzemvitel optimalizálására. Az eredményeket más genetikus algoritmusokkal és a világ élvonalába tartozó, de általános célú optimalizációs módszerekkel hasonlítottam össze. Kidolgozásra került egy dinamikus programozás alapú, a valós, globális optimumot adó módszer is. Az algoritmus a gyakorlatban elterjedt, ún. "kombinációs" hálózatként modellezhető vízműhálózat típusokra alkalmazható, ahol a szivattyúk munkapontjai diszkrét értékek. A megoldás alapját az ún. "permutációs invariancia" jelensége adja, mely lehetővé teszi az állapottér információveszteség nélküli, tökéletes diszkretizációját. Egy, a korábban bemutatott genetikus algoritmuséhoz hasonló problémakört megoldó, de közelítő dinamikus programozás alapú módszer is bemutatásra kerül. Az algoritmus a hálózat kisebb részegységekre (víztermelő területekre és fő elosztó hálózatra) való felbontásával és a fő elosztó hálózat állapotterének önkényes, de a megoldás jóságán jelentősen nem rontó csökkentésével éri el a program futtatásához szükséges számítási igény csökkentését. A tesztfeladatok egy része megegyezik a genetikus algoritmus tesztfeladataival, így azok közvetlenül összehasonlíthatóak. Végül bemutatásra kerül egy kisméretű, mindössze egy darab változtatható fordulat- számú szivattyúval táplált rendszer energetikai vizsgálata. Az itt bemutatott módszerek mind a fajlagos energiafelhasználás minimalizálásán alapulnak. Az eredményeket egy nagyfelbontású dinamikus programozás alapú módszerhez hasonlítottam.

Syfte: Nya svenska energikrav definieras som nära-nollbyggnader för både nybyggnation och renovering, där man strävar efter en årlig balans mellan ingående och utgående energi för byggnaden. Påbyggnad genom prefabricerade modulsystem med bärande väggar av korslimmat massivträ har genom internationella studier visat sig både tids- och kostnadseffektiv vid renovering. Målet med rapporten är att undersöka möjligheten att tillämpa detta påbyggnadssystem för svenska renoveringsprojekt av efterkrigstidens flerbostadshus som både är kostnadseffektivt och som klarar nya svenska energikrav. Metod: Rapporten syftar till att besvara frågeställningarna genom en fallstudie. Inledningsvis, under en litteraturstudie, beskrivs incitament till påbyggnation vid renovering. Utefter en dokumentanalys av referensbyggnaden, utförs sedan energi- och kostnadsjämförelser mellan påbyggnation av korslimmade massivträväggar och platsbyggd träregelkonstruktion. Resultat: Svenska efterkrigstidens bostadsbestånd visar sig, via renovering och påbyggnation, ha hög potential för att positiv påverka den i Sverige genomsnittliga specifika energianvändningen samtidigt som det erbjuder snabb och kostnadseffektiv urban bostadsförtätning. Den värmeisolerande förmågan för korslimmat massivträ är, för en påbyggnad, likvärdigt det av platsbyggd träkonstruktion. Beräkningarna visar däremot hur byggnation från efterkrigstiden har svårt att uppnå krav för nära-nollenergihus. Kostnad för montering av påbyggnadsstomme och innerväggar m.m. visar på ca 2,7 % besparing för förslag av korslimmat massivträ. Konsekvenser: Rapporten lyfter fram möjligheterna kring renovering av svenska flerbostadshus från efterkrigstiden och fördelarna att göra detta i kombination med påbyggnation. Det finns goda förutsättningar för implementering av korslimmade massivträväggar även i svenska påbyggnadsprojekt och detta till något lägre pris och arbetstid gentemot platsbyggd konstruktion. Trots att detta vilar mycket på valet av prefabricering, har undersökningen lyckats exponera ett befogat alternativ för påbyggnadsprojekten i framtiden. Eventuella svårigheter i att uppnå nya energikrav vid renovering av äldre bostadsbestånd har även lyfts fram i rapporten. Begränsningar: Kontroll av bärförmåga för referensbyggnaden via konstruktionsmässiga beräkningar genomförs inte i denna rapport. Beräkning av livscykelkostnad ingår inte i detta arbete. Rapporten fokuserar istället på ekonomisk effektivitet i produktionsskedet. Rapporten fokuserar sin undersökning kring åtgärder för energianvändning och berör inte eventuella åtgärder för t.ex. högre tillgänglighet. / Purpose: New Swedish energy requirements are defined as Near Zero Energy Buildings for both new construction and renovation, with the purpose of balancing energy entering and exiting the building. Vertical attic extensions through prefabricated module system containing loadbearing walls of cross laminated timber has, by international studies, shown the potential for time and cost efficiency during renovation projects. The purpose of this inquiry is to examine the possibility to apply this extension system for Swedish renovation projects on post-war residential buildings that are both cost effective and that satisfies new Swedish energy regulations. Method: The report aims to answer the questions through a case study. Initially a literature study describes the incentives of vertical attic extensions and renovation. Then through a document analysis of a reference building, energy and cost comparisons are carried out between an attic extension of cross laminated timber and wood construction assembled on site. Findings: The Swedish post-war housing stock shows high potential through renovation and attic extension, to positively influence the Swedish average specific energy use while simultaneously providing fast and cost effective urban densification. The heat insulating performance of cross laminated timber is, for an attic extension, equivalent that of an on-site assembled wood construction. However, calculations shows difficulties for post-war housing stock to achieve the requirements for Near Zero Energy Buildings. The cost for assembling extending structure and interior walls etc. reveals approximately 2,7 % savings with cross laminated timber. Implications: The report brings forth the possibilities regarding renovation of the Swedish post-war stock of multifamily housing and the advantages of doing so in combination with vertical attic extensions. There are good conditions for implementation of cross laminated timber walls even in Swedish extension projects, while having the potential to lower costs slightly and saving time in relation to on site construction. Even though the results depend a lot on the choice of prefabrication, the study has exposed a valid alternative for future attic extension projects. The report also reveals potential difficulties in achieving new energy requirements for renovation of older housing stock. Limitations: Verification of load capacity through constructional calculations are not performed in this inquiry. Calculating the life-cycle cost is not a part of this project, which instead focuses on economic efficiency during production. The report focuses its research at energy-saving measures and doesn’t concern measures regarding for example higher accessibility.

Purpose: Villas built before 1960 represent around 45% of the dwelling in Sweden. Since the average U-value in their walls is around 0,5 W/m2K, there is a great concern to improve  these values. The Swedish government's goal is to reduce energy intensity in the country by 2020 by 20 % from 2008’s values. The aim of this study is to reach phase renovation proposals taking into account energy and moisture on houses consisting of standing shelves. With this, the authors wish to contribute and encourage renovation of existing villas, which in turn can lead to reduced energy consumption. Method: This work is based on a case study of a 1940’s wooden house located in Skillingaryd. Measurements and parameters have been taken in order to calculate the house's specific energy usage in the BV2 analysis program. Document analyses and interviews have been used to get a deeper knowledge of existing conditions, and to suggest ways to utilise the material that the market offers nowadays. This should serve the purpose of creating as energy-efficient phase resolution as possible. Result: The study shows that an outer wall of a massive wooden house should keep a U-value of 0,15 W/m2K to meet the specific energy consumption of 90 kWh/m2 and year, when the other house is additional insulated. The study presents two refurbishment proposals supported by interviewed experts in the insulation and consulting industry. The first option leaves large parts of the old facade untouched, adding new insulation layers of the desired thickness. The second option advises to tear away all old panels into the shelf frame, thus re-building with new materials. Both proposals address the issue of how the facade should be refurbished in order to make it moisture proof. They mostly solve the problem by refurbishing it outwards and by eventually placing a vapor barrier for a maximum of one third in of the insulation. This vapor barrier may or may not be a watershed according to the experts. Some think it is unnecessary when the plank is considered sufficiently diffusion-proof; some believe that it will help to identify where a possible condensation might occur in the wall.  Consequences: The study shows that by means of additional insulation, BBR 24 recommended values ​​can be achieved for an exterior wall while keeping the façade moisture proof. One strength the study shows that the two reported renovation proposals achieve the same end result, although the interference on the facade varies in size. Therefore the authors of the above study recommend to tear down the old facade and build a new control wall with a finishing facade disc. This is when you face a vapor barrier on the façade with a vapor barrier that is laid on the old baselayer of the roof. Then a new roof construction could be built up with roof beams, shavings and roof tiles. As a result, a windy, yet proportional, construction can be created.   Restrictions: The study assumes that the entire house would be refurbished in order for the specific energy use to be possible. Furthermore, the work is based of a shelf shelter located at a particular geographical site. Due to this, the study also offers suggestions on wooden facades only.  Keyword: Plank body, Phase renovation, Specific energy use, diffusion, convection, U-value, air density.

The main purpose of this master’s thesis is description of the current technology of compressed air production in the grounds of Třinecké Železárny, a.s. (TZ). Compressed air for companies in the TZ area is manufactured and distributed by company Energetika Třinec, a.s. (ET). The part of the thesis is the preparation and execution of measurement including evaluation of specific energy consumption for production of compressed air by compressors of ET company. In conclusion there is proposed the possibility of substitution of compressors including the economic evaluation.