The finite element methods (FEM) have been developed over decades, and together with the growth of computer engineering, they become more and more important in solving large-scale problems in science and industry. The objective of this thesis is to develop high-performance finite element methods (HP-FEM), with two main applications in mind: computational diffusion magnetic resonance imaging (MRI), and simulation of the turbulent flow past a vertical axis wind turbine (VAWT). In the first application, we develop an efficient high-performance finite element framework HP-PUFEM based on a partition of unity finite element method to solve the Bloch-Torrey equation in heterogeneous domains. The proposed framework overcomes the difficulties that the standard approaches have when imposing the microscopic heterogeneity of the biological tissues. We also propose artificial jump conditions at the external boundaries to approximate the pseudo-periodic boundary conditions which allows for the water exchange at the external boundaries for non-periodic meshes. The framework is of a high level simplicity and efficiency that well facilitates parallelization. It can be straightforwardly implemented in different FEM software packages and it is implemented in FEniCS for moderate-scale simulations and in FEniCS-HPC for the large-scale simulations. The framework is validated against reference solutions, and implementation shows a strong parallel scalability. Since such a high-performance simulation framework is still missing in the field, it can become a powerful tool to uncover diffusion in complex biological tissues. In the second application, we develop an ALE-DFS method which combines advanced techniques developed in recent years to simulate turbulence. We apply a General Galerkin (G2) method which is continuous piecewise linear in both time and space, to solve the Navier-Stokes equations for a rotating turbine in an Arbitrary Lagrangian-Eulerian (ALE) framework. This method is enhanced with dual-based a posterior error control and automated mesh adaptation. Turbulent boundary layers are modeled by a slip boundary condition to avoid a full resolution which is impossible even with the most powerful computers available today. The method is validated against experimental data of parked turbines with good agreements. The thesis presents contributions in the form of both numerical methods for high-performance computing frameworks and efficient, tested software, published open source as part of the FEniCS-HPC platform. / <p>QC 20180411</p>

<p>This thesis reports on a numerical and experimental investigation of the unsteady loading of high solidity vertical axis wind turbines (VAWTs). Two-dimensional, unsteady Reynolds averaged Navier-Stokes simulations of a small scale, high solidity, H-type Darrieus vertical axis wind turbine revealed the dominant effect of dynamic stall on the power production and vibration excitation of the turbine. Operation of the turbine at low blade speed ratios resulted in complex flow-blade interaction mechanisms. These include; dynamic stall resulting in large scale vortex production, vortex impingement on the source blade, and significant flow momentum extraction.</p> <p>To validate the numerical model, a series of full-scale experimental wind tunnel tests were performed to determine the aerodynamic loading on the turbine airfoils, vibration response behaviour, and wake velocity. In order to accomplish this, a complex force measurement and wireless telemetry system was developed. During the course of this investigation, high vibration response of the turbine was observed. This resulted in conditions that made it difficult or impossible to measure the underlying aerodynamic loading. A vibration mitigation methodology was developed to remove the effect of vibration from the measured aerodynamic forces. In doing so, an accurate and complete measurement of the aerodynamic loading on the turbine blades was obtained.</p> <p>Comparison of the two-dimensional numerical model results to the experimental measurements revealed a considerable over-prediction of the turbine aerodynamic force and power coefficients, and wake velocity. From this research, it was determined that the three-dimensional flow effects due to the finite aspect ratio of the turbine and blades, as well as parasitic losses, could be accounted for through the application of inlet velocity and turbine height correction factors. In doing so, the two-dimensional numerical model results could be properly scaled to represent the three-dimensional flow behaviour of the turbine prototype. Ultimately, a validated VAWT design tool was developed.</p> / Doctor of Philosophy (PhD)

Multiline anchors are a novel way to reduce the cost of arrays of floating offshore wind turbines (FOWTs), but their behavior is not yet fully understood. Through metocean characterization and dynamic simulations, this thesis investigates the effects of wind-wave misalignment on multiline anchor systems. Four coastal U.S. sites are characterized in order to develop IEC design load cases (DLCs) and analyze real-world misaligned conditions. Stonewall Bank, Oregon showed the highest 500-year extreme wave height, at 16.6 m, while Virginia Beach, Virginia showed the highest 500-year wind speed, at 56.8 m/s. Misalignment probability distributions, at all sites, are found to converge towards zero (aligned conditions) and become less variable as wind speed increases. This indicates that high misalignment angles are unlikely at high wind speeds. A simulation parameter study, spanning a range of wave directions, misalignment angles, and DLCs, is run in OpenFAST to explore how misalignment affects multiline anchor loading. The simulated anchor is connected to three IEA 15 MW FOWT models via a taut mooring system. The force on the multiline anchor is calculated by summing the three tension vectors from the mooring lines. The mean direction of this force is found to align closely with the wind; each mean is within 5.5° of the wind direction. Higher misalignment angles cause increases to the amount of directional variation about this mean. The magnitude of the multiline force is also examined. Mean force level is found to be nearly unaffected by misalignment. However, maximum force decreases significantly as misalignment angle increases, dropping as much as 23.3% in extreme conditions. This confirms current anchor design practice, which treats aligned metocean conditions as the peak load an anchor experiences. Standard deviation of multiline force also decreases with misalignment. The operational load case, DLC 1.6, shows a slight trend towards this, but the extreme case, SLC, shows a more pronounced drop of 32.4%. This suggests that anchor cyclic loading analyses could benefit from considering misalignment. Doing so could lead to lower estimates of the cyclic loading amplitudes that anchor designs must withstand, thus leading to smaller, cheaper anchors.

Airplane wings, turbine blades and other structures subjected to air or water flows, can undergo motions depending on their flexibility. As such, the performance of these systems depends strongly on their geometry and material properties. Of particular importance is the contribution of different nonlinear aspects. These aspects can be of two types: aerodynamic and structural. Examples of aerodynamic aspects include but are not lomited to flow separation and wake effects. Examples of structural aspects include but not limited to large deformations (geometric nonlinearities), concentrated masses or elements (inertial nonlinearities) and freeplay. In some systems, and depending on the parameters, the nonlinearities can cause multiple solutions. Determining the effects of nonlinearities of an aeroelastic system on its response is crucial. In this dissertation, different aeroelastic configurations where nonlinear aspects may have significant effects on their performance are considered. These configurations include: the effects of the wake on the flutter speed of a wing placed under different angles of attack, the impacts of the wing rotation as well as the aerodynamic and structural nonlinearities on the flutter speed of a rotating blade, and the effects of the recently proposed nonlinear energy sink on the flutter and ensuing limit cycle oscillations of airfoils and wings. For the modeling and analysis of these systems, we use models with different levels of fidelity as required to achieve the stated goals. We also use nonlinear dynamic analysis tools such as the normal form to determine specific effects of nonlinearities on the type of instability. / Ph. D.

In eastern North America, "tree bats" (Genera: Lasiurus and Lasionycteris) are highly susceptible to collisions with wind energy turbines and are known to fly offshore during migration. This raises concern about ongoing expansion of offshore wind-energy development off the Atlantic Coast. Season, atmospheric conditions, and site-level characteristics such as local habitat features (e.g., forest coverage) have been shown to influence wind turbine collision rates by bats onshore, and similar features may be related to risk offshore. In response to rapidly developing offshore wind energy development, I assessed the factors affecting coastal and offshore presence of tree bats. I continuously gathered tree bat nightly occurrence data using stationary acoustic recorders on five structures (four lighthouses on barrier islands and one light tower offshore) off the coast of Virginia, USA, across all seasons, 2012–2019. I used generalized additive models to describe nightly tree bat occurrence in relation to multiple factors. I found that sites either indicated maternity or migratory patterns in their seasonal occurrence pattern that were associated with local roosting resources (i.e., presence of forest). Across all sites, nightly occurrence was negatively related to wind speed and positively related to temperature and visibility. Using predictive performance metrics, I concluded that the model was highly predictive for the Virginia coast. My findings were consistent with other studies—tree bat occurrence probability and presumed mortality risk to offshore wind-energy collisions is highest on nights with low wind speed, high temperature and visibility during spring and fall. The high predictive model performance I observed provides a basis for which managers, using a similar monitoring and modeling regime, could develop an effective curtailment-based mitigation strategy. Although information at fixed points is helpful for managing specific sites, large questions remain on certain aspects of tree bat migration, in part because direct evidence (i.e., tracking of individuals) has been difficult to obtain so far. For instance, patterns in fall behavior such as the timing of migration events, the existence of migratory pathways, consistencies in the direction of travel, the drivers of over-water flight, and the activity states of residents (or bats in stopover) remain unstudied in the mid-Atlantic. The recently established Motus Wildlife Tracking System, an array of ground-based receiver stations, provides a new technique to track individual bats via the ability to detect course-scale movement paths of attached very high frequency radio-tags. To reveal patterns in migration, and to understand drivers of over-water flight, I captured and radio-tagged 115 eastern red bats (Lasiurus borealis) and subsequently tracked their movements. For the bats with evidence of large movements, most traveled in a southwesterly direction whereby paths were often oriented interior toward the continental landmass rather than being oriented along the coastline. This observation challenges earlier held beliefs that bats closely follow linear landscape features, such as the coast, when migrating. I documented bats traveling across wide sections of the Chesapeake and Delaware bays confirming the species' ability to travel across large water bodies. This behavior typically occurred in the early hours of the night and during favorable flying conditions such as low wind speeds, warm temperatures, and/or during sudden increases in temperature associated with the passage of cold fronts. For bats engaging in site residency through the fall, the proportion of night-hours in which bats were in a resting state (and possibly torpor), increased with colder temperatures and the progression of the fall season. My study demonstrated that bats may be at risk to offshore wind turbine collisions off the mid-Atlantic, but that this risk might be minimal if most bats are migrating toward the interior landscape rather than following the coast. Nonetheless, if flight over large water bodies such as Chesapeake and Delaware bays is a viable proxy for over-ocean flight, then collision risk at offshore wind turbines may be somewhat linked to atmospheric, seasonal timing, or other effects, and therefore some level of predictable and manageable with mitigations options such as smart curtailment. / Master of Science / In eastern North America on the mid-Atlantic and Northeast coasts, a group of bat species named "tree bats" engage in seasonal migrations—generally shifting north in spring and south in fall. On the East coast, it is known that eastern red bats and silver-haired bats will occasionally fly over the ocean during these periods. Although this behavior is somewhat hard to explain due to their reliance on trees for day-time roosting, it raises concern conservation concerns due to the current and future rapid development of offshore wind energy turbines. This is compounded by the fact that collision rates with turbines are high for this species group in general and highest in the fall migratory season. The fall period is also when bats may be attracted to tall structures such as turbines and when most offshore flight happens. Nevertheless, bats are sensitive to atmospheric conditions such as temperature and wind speed, and other factors influence their propensity to fly (and be at risk to turbine strikes). So, understanding these drivers may aid in understanding the conditions that present the highest risk to strike at offshore wind turbines. In response to rapid offshore wind development in the Atlantic, I recorded bats in coastal Virginia, USA from 2012–2019, using acoustic monitors—devices that collect the echolocation vocalizations of bats. I found that tree bat visitation offshore or on barrier islands was associated with wind speed, temperature, visibility, and seasonality. Using statistical modeling, I developed a predictive tool to assess occurrence probabilities at varying levels of wind speed, temperature, and seasonality. Probability of occurrence and therefore assumed risk to collision was highest on high temperature and visibility nights, low wind speed nights, and during the spring and fall seasons. Therefore, I suggest a similar modeling regime could be used to predict the occurrence of bats at offshore wind sites to inform potential mitigation efforts. Next, I attempted to answer broader questions about tree bat migratory behavior such as attempting to identify migratory pathways throughout the mid-Atlantic. The Motus Wildlife Tracking System gives researchers the ability to directly track individuals over long-distances with radio-transmitters and ground-based receiver stations. Using Motus, I captured and radio-tagged >100 tree bats, which were of majority eastern red bats and tracked their movements throughout the mid-Atlantic region. I found that movements were not oriented along the coastline, which challenged previously held beliefs that bats use the coast during migration. Tree bats also traversed large bodies of water, the Chesapeake and Delaware bays, confirming the ability for this group to fly over-water. Through statistical modeling, I found that these over-water bouts were early in the night and related to advantageous flying conditions such as low wind speeds, high temperatures, and during periods of sudden temperature increase (which could be linked to the passage of cold weather fronts). Offshore collision risk to tree bats may be somewhat minimal if most bats orient inland, rather than coastal for their migration movement. Nevertheless, for those bats that do fly over the ocean, if crossing large waterbodies is a viable proxy for over-ocean movement, then this behavior is linked to multiple factors, of which can be used to predict occurrences and even potentially predict and manage risk to collision.

The research is motivated by the need to address two major challenges in wind power integration: how to mitigate wind power fluctuation and how to ensure stability of the farm and host grid. It is envisaged that wind farm power output fluctuation can be reduced by using a specific type of buffer, such as an energy storage system (ESS), to absorb its negative impact. The proposed solution, therefore, employs ESS to solve the problems. The key research findings include a new technique for calculating the desired power output profile, an ESS charge-discharge scheme, a novel direct-calculation (optimization-based) method for determining ESS optimal rating, and an ESS operation scheme for improving wind farm transient stability. Analysis with 14 wind farms and a compressed-air energy storage system (CAES) shows that the charge-discharge scheme and the desired output calculation technique are appropriate for ESS operation. The optimal ESSs for the 14 wind farms perform four or less switching operations daily (73.2%-85.5% of the 365 days) while regulating the farms output variation. On average, the ESSs carry out 2.5 to 3.1 switching operations per day. By using the direct-calculation method, an optimal ESS rating can be found for any wind farm with a high degree of accuracy. The method has a considerable advantage over traditional differential-based methods because it does not require knowledge of the analytical form of the objective function. For ESSs optimal rating, the improvement in wind energy integration is between 1.7% and 8%. In addition, a net increase in grid steady-state voltage stability of 8.3%-18.3% is achieved by 13 of the 14 evaluated ESSs. For improving wind farm transient stability, the proposed ESS operation scheme is effective. It exploits the use of a synchronous-machine-based ESS as a synchronous condenser to dynamically supply a wind farm with reactive power during faults. Analysis with an ESS and a 60-MW wind farm consisting of stall-regulated wind turbines shows that the ESS increases the farm critical clearing time (CCT) by 1 cycle for worst-case bolted three-phase-to-ground faults. For bolted single-phase-to-ground faults, the CCT is improved by 23.1%-52.2%. / text

V tomto projektu jsou popsány základy problematiky větrných elektráren. V první řadě práce zmiňuje ekomonické aspekty, vývoj větrné energetiky v minulosti a pravděpodobný vývoj v příští generaci, stavbu a možné topologie větrných elektráren. Dále je ukázána konstrukce větrné elektrárny, integrace větrvých parků do distribuční sítě a ostrovní sítě a související ekonomické aspekty. Dále jsou zmíněny způsoby řízení, kvality elektrické energie a bezpečnosti. V následující části, je provedena simulace moderní přímo poháněné turbíny o výkonu 660kW a řešení koeficientu výkonu. Pro tuto simulaci byl použitý systém s pomaloběžným synchronním generátorem s permanentnímy magnety. Chování a výsledky simulace větrné elektrárny jsou popsány v závěrečné části této práce.

Ce travail présente une méthodologie de Conception Optimale Intégrée (COI) d'un système éolien entièrement passif pour offrir un compromis coût-fiabilité–performance très satisfaisant. En l'absence d'électronique de puissance et de contrôle par MPPT, le dispositif n'est efficace que si l'adaptation des constituants est optimale. L'extraction de vent ainsi que les pertes globales du système sont donc optimisées à l'aide d'un algorithme génétique multicritère pour augmenter l'efficacité énergétique et minimiser la masse pour un profil de vent donné. La globalité du système (turbine – génératrice – redresseur - stockage) a été modélisée pour parvenir aux résultats d'optimisation et à la réalisation d'un prototype correspondant à une solution particulière. Les résultats obtenus montrent, d'une part, la cohérence entre modèles et expérience. D'autre part, il est possible, pour un profil de vent donné, d'obtenir une configuration optimale de l'ensemble génératrice – pont redresseur présentant des caractéristiques analogues à celles d'architectures « actives" plus complexes, associées à des lois de contrôle par MPPT. Suite à une analyse de sensibilité des performances aux paramètres, une de nos contributions concerne une approche de conception intégrant les questions de robustesse au sein même du processus d'optimisation. / This work deals with an Integrated Optimal Design (IOD) methodology of a full passive wind turbine system offering very good tradeoff in terms of cost, reliability and performance. Without active electronic device (power and MPPT control), efficiency of such architecture can only be obtained if all devices are mutually adapted: this can be achieved through an Integrated Optimal Design (IOD) approach. Wind energy extraction as whole losses are then optimized from a multiobjective genetic algorithm which aims at concurrently optimizing the energy efficiency while reducing the weight of the wind turbine system given a wind cycle. The whole system (turbine, generator, diode reducer, battery DC bus) has been modeled to obtain optimization results and finally to select a particular solution for an experimental validation. On the one hand, the obtained results put forward coherency between models and experience. On the other hand, given a reference wind cycle, it is possible to obtain optimal devices (generator – reducer – DC bus) whose energy efficiency is nearly equivalent to the ones obtained with active and more complex systems with MPPT control. Based on a sensitivity analysis of performance versus parametric uncertainties, one major contribution deals with a design methodology integrating robustness issues inside the optimization process.

On étudie des phénomènes de séparation d'écoulement avec deux approches différentes. Dans la première partie, on considère des écoulements 2D, instationnaires, incompressibles et non visqueux. Un modèle analytique-numérique, basé sur la jonction d'une transformation conforme et d'une méthode aux tourbillons ponctuels, est construit pour définir l'écoulement potentiel dans un domaine doublement connecté où les corps sont caractérisés par une variation temporelle de leur circulation. En particulier, on s'intéresse à l'étude de l'écoulement autour d'un VAWT avec deux pales. Dans la seconde partie on considère des écoulements visqueux et compressibles. On construit un solveur qui résoud les équations de Navier-Stokes en y introduisant une technique de pénalisation: les corps sont modélisés comme des milieux poreux ayant une porosité très petite par rapport à la porosité du fluide extérieur. Cette technique permet d'utiliser des maillages cartésiens pour des géométries très complexes. / In the present work flow separation phenomena are investigated by means of two different approaches. In the first part, 2D unsteady incompressible inviscid flows are studied. An analytical-numerical model, based on the conjunction of a conformal mapping and a point vortex method, is built to define the potential flow field in a doubly connected domain where bodies are characterized by a variation in time of their circulation. In particular, the study of the unsteady flow past a 2-blade Darrieus VAWT is addressed. Until now the study of vortex motions has only been described in doubly-connected flow fields where the circulations have a constant null value. The flow field here analysed has a deep unsteadiness, which determines the circulations varying in time: so a technique is developed to uniquely define the circulations around the bodies. Three conditions result necessary to be imposed: in addition to the two Kutta conditions at the trailing edges, another one has to be imposed in order to respect the Kelvin theorem. With a classical configuration, this machine, experiencing angles of attack of opposite values, gives rise to complex vortex shedding phenomena that reduce its performances and stress its structure. In order to control the flow separation from the blades, an innovative solution is qualitatively investigated which consists of taking blade profiles provided with vortex trapping cavities. Interesting results are obtained, even if in the limit of inviscid flow. In the second part compressible viscous flows are taken into account. A fully Navier-Stokes equations solver is implemented introducing the penalization technique. The idea is to replace the bodies by the fluid, in a way that also into the bodies the penalized Navier-Stokes equations remain valid, respecting the boundary conditions on their contours. Starting from this purpose, the bodies are considered as porous media with a little porosity with respect to that of the external flow, which tends to infinity. This technique allows simple Cartesian meshes to be used, also for very complex geometries like those of industrial interest. The resulting code is tested on different flow fields, both steady and unsteady, both subsonic and supersonic, obtaining always a good agreement with other theoretical and numerical results described in literature.

La capacité des systèmes conventionnels de production d'énergie éolienne et marémotrice à fournir au réseau une énergie fiable et stable à tout moment est un nouveau défi en raison des fluctuations météorologiques, qui ont un impact significatif et direct sur la production d'énergie. C'est pourquoi l'hybridation des systèmes de production d'énergie éolienne et hydrolienne ont été étudiées pour améliorer l'intégration des énergies éolienne et marémotrice sur le réseau électrique.Cette étude nous a amené à développer des contributions liées à deux axes principaux :Le premier axe est focalisé sur un nouveau concept d'hybridation de deux sources énergétiques différentes en termes de propriétés physiques, l’éolien et l’hydrolienne à axe horizontal, basé sur un couplage électromécanique de ces deux systèmes. Les deux ressources sont l’énergie éolienne et l’énergie des courants marins. Le concept est développé en utilisant les similitudes fonctionnelles des turbines et les similarités en conversion d’énergie de leurs chaînes énergétiques. Pour appliquer ce concept en premier lieu, les paramètres de la génératrice asynchrone à double alimentation installée dans l’émulateur du GREAH sont identifiés. Ensuite, la chaîne de conversion de puissance est modélisée mathématiquement et simulée dans un environnement MATLAB / SIMULINK. Nous avons développé deux stratégies de commande.Une stratégie à vitesse fixe appelé "Contrôle direct de la vitesse", et une stratégie à vitesse variable basée sur la recherche de puissance maximale, dénommée "Contrôle indirecte de vitesse". Enfin, ce concept a été implémenté pratiquement sur l’émulateur en temps réel du laboratoire. Les résultats obtenus ont été analysés et discutés suite à ces travaux.Le deuxième axe est consacré à un concept que l’on appelle «temps accélérée» de simulation ou « temps virtuel ». Par la suite, ce concept a été mis en œuvre sur l’émulateur multi physique disponible au laboratoire GREAH. Ce concept (temps accélérée) est basé sur la réduction des échantillons de profil de vent afin de diminuer le temps de simulation et faciliter la commande en temps réel.Les résultats principaux sont obtenus d’abord dans MATLAB / SIMULINK, puis ont été vérifiés sur l’émulateur en temps réel. L’objectif principal de cette thèse est d’étudier le concept d’hybridation éolienne offshore / éolienne basée sur la flexibilité d’un émulateur multifonctions permettant diverses architectures d’émulation : éoliennes, éoliennes, et systèmes hybrides éoliennes - éoliennes. Nous analysons son impact sur la puissance de sortie du système. Les résultats obtenus sont corrélés aux profils de vitesse du vent et des marées, dans lesquels les propriétés statistiques ayant un impact sur les chaînes énergétiques mondiales pourraient être complémentaires et en particulier en fonction des sites donnés.Contributions principales et perspectives- Développement du concept de couplage électromécanique. Lorsque deux sources d’énergie renouvelables sont « intégrées », on stabilise la fluctuation rapide de la puissance générée, mais sous certaines conditions telles que la présence d’unités de stockage ou d’un système d’embrayage automatique.- Le concept temps accéléréeCette méthode est utilisée pour réduire la taille des données enregistrées du vent ou des courant marins, afin d’accélérer le temps de simulation des unités de production d'énergie avec des résultats raisonnables qui se rapprochent pertinemment des situations réelles.- Etudier et développer le concept de régime d’arbre électrique :Si le couplage électromécanique est difficile à réaliser du point de vue mécanique et que les découplages à arbre unique sont trop fréquents et que les contraintes mécaniques sont élevées, on peut étudier le régime de l'arbre électrique avec deux machines à induction DFIG. Le système peut fonctionner en mode synchrone avec des structures et configurations spécifiques. / The ability of conventional wind and tidal generation systems to provide the grid with reliable and stable power at all times is a new challenge due to weather fluctuations, which have a significant and direct impact on energy production. This is why the hybridization of wind and tidal power generation systems has been studied to improve the integration of wind and tidal power into the electricity grid.This study led us to develop contributions related to two main axes:The first axis is focused on a new concept of hybridization of two different energy sources in terms of physical properties, wind and horizontal axis turbines, based on an electromechanical coupling of these two systems. The two resources are wind energy and marine energy. The concept is developed using the functional similarities of turbines and similarities in energy conversion of their energy chains. To apply this concept first, the parameters of the double fed asynchronous generator installed in the GREAH emulator are identified. Then, the power conversion chain is modeled mathematically and simulated in a MATLAB / SIMULINK environment. We have developed two control strategies.A fixed speed strategy called "Direct Speed Control", and a variable speed strategy based on the search for maximum power, called "Indirect Speed Control". Finally, this concept has been implemented practically on the real-time emulator of the laboratory. The results obtained were analyzed and discussed following this work.The second axis is devoted to a concept called "accelerated time" simulation or "virtual time". Subsequently, this concept was implemented on the multi-physics emulator available at the GREAH laboratory. This concept (accelerated time) is based on reducing wind profile samples in order to decrease simulation time and facilitate real-time control.The main results are obtained first in MATLAB / SIMULINK, then verified on the emulator in real time.The main objective of this thesis is to study the concept of offshore wind / tidal turbine hybridization based on the flexibility of a multi-function emulator that allows various emulation architectures: wind turbines, tidal turbines, and hybrid wind - tidal turbines systems. We analyze its impact on the output power of the system; the obtained results are correlated with wind and tidal speed profiles, in which statistical properties impacting global power chains could be complementary and in particular in function of the given sites. Main contributions and perspectives- Development of the concept of electromechanical coupling.When two renewable energy sources are "integrated", the rapid fluctuation of the power generated is stabilized, but under certain conditions such as the presence of storage units or an automatic clutch system.- The accelerated time conceptThis method is used to reduce the size of the recorded wind or sea current data, to speed up the simulation time of the power generation units with reasonable results that are close to actual situations.- Study and develop the concept of electric shaft regime: If the electromechanical coupling is difficult to achieve from the mechanical point of view and the single shaft decouples are too frequent so high mechanical stress, one can study the electric shaft regime with two DFIG induction machines.There is a regime in which the ratios between the speeds of the different machines are rigorously constant. The system can operate in synchronous mode with specific structures and configurations.