Ce travail de thèse décrit la synthèse de copolymères diblocs amphiphiles par polymérisation radicalaire contrôlée par transfert d'iode en mode inverse (RITP). Dans un premier temps, des homopolymères à base de monomères activés (styrène, acrylate de méthyle, méthacrylate de méthyle), non activés (acétate de vinyle) et fonctionnels (chlorométhylstyrène, acrylate de tert-butyle), ont été synthétisés par RITP. Des aspects tels que le contrôle des masses molaires ainsi que la fonctionnalité en iode du bout de chaîne ont été examinés. Afin de démontrer la compatibilité de la RITP avec d'autres techniques de polymérisation contrôlée/vivante (non radicalaires), le copolymère amphiphile non-ionique poly(styrène)-b-poly(2-méthyl-2-oxazoline) (PS-b-P(MOx)) a été élaboré par la voie toute iode en procédé « one-pot » en combinant de manière consécutive la RITP du styrène avec la polymérisation cationique par ouverture de cycle (CROP) de la 2-méthyl-2-oxazoline. Par ailleurs, des copolymères cationiques poly(styrène)-b-poly(chlorométhylstyrène) quaternisé avec la triéthylamine (PS-b-PCMS+) et anioniques poly(styrène)-b-poly(acide acrylique) (PS-b-PAA-) ont été synthétisés par RITP du styrène suivie de l'ITP du bloc hydrophile. Tous ces copolymères amphiphiles ont été obtenus à partir de polystyrène iodé (PS-I) de faibles masses molaires, allant de 1000 à 3000 g.mol-1, jouant le rôle de macro-amorceurs (CROP) ou de macro-agents de transfert (ITP). L'étude de l'auto-organisation en phase aqueuse de ces copolymères amphiphiles a révélé la formation de micelles pour des concentrations supérieures à la concentration d'agrégation critique (CAC) dont la valeur a été déterminée par diffusion dynamique de la lumière (DDL) et spectroscopie de fluorescence. Enfin, des résultats très prometteurs ont été obtenus dans l'utilisation d'un copolymère cationique amphiphile PS-b-PCMS+ comme agents structurants de matériaux siliciques mésoporeux nanostructurés élaborés par procédé sol-gel en milieu basique. La synthèse de ces copolymères amphiphiles ainsi que leur caractérisation physico-chimique ont mis en exergue que la RITP permet de couvrir la synthèse de différentes catégories de copolymères amphiphiles, tout en étant une technique simple à mettre en œuvre, peu couteuse et robuste. / This manuscript describes the synthesis of amphiphilic diblock copolymers by reverse iodine transfer polymerization (RITP). Firstly, homopolymers derived from activated (styrene, methyl acrylate, methyl methacrylate), non-activated (vinyl acetate) and functional monomers (chloromethylstyrene, tert-butyl acrylate) synthesized by RITP, were studied. Aspects including molecular weight control as well as iodine chain-end functionality were investigated. In order to highlight the compatibility of RITP with other living/controlled (non-radical) polymerization techniques, a poly(styrene)-b-poly(2-methyl-2-oxazoline) (PS-b-P(MOx)) non-ionic copolymer was conceived through an ‘all-iodine', ‘one-pot' process by combining successively RITP of styrene with cationic ring-opening polymerization (CROP) of 2-methyl-2-oxazoline. Besides, poly(styrene)-b-poly(chloromethylstyrene) quaternized with triethylamine (PS-b-PCMS+) cationic copolymers and poly(styrene)-b-poly(acrylic acid) (PS-b-PAA-) anionic copolymers were elaborated by RITP of styrene, followed by ITP of the hydrophilic moiety. All these amphiphilic copolymers were obtained from iodine-bearing chain-end poly(styrene) (PS-I) of low molecular weights, in the range of values of 1000 to 3000 g.mol-1, playing the role of macro-initiators (CROP) or macro-transfer agents (ITP). Studies of the self-assembly of these amphiphilic copolymers in aqueous phases revealed the formation of micelles for concentrations superior to the critical aggregation concentration (CAC). The latter value was determined by dynamic light scattering (DLS) and fluorescence spectroscopy. Moreover, highly-promising results were obtained in the use of PS-b-PCMS+ cationic copolymers as structuring agents meant for the elaboration of nanostructured, mesoporous silica-based materials through the sol-gel process in basic medium. Both the synthesis of the amphiphilic copolymers and their physico-chemical characterizations have evidenced that RITP fosters the synthesis of different categories of amphiphilic copolymers, while being a simple, cheap and robust technique.

Atualmente, a irradiação por micro-ondas tem se mostrado uma boa fonte de energia para a realização de sínteses orgânicas, devido a uma série de vantagens que essa nova tecnologia apresenta. Entretanto, ainda existem poucos estudos sobre polimerizações assistidas por micro-ondas. Neste trabalho foram realizadas a síntese da 2-fenil-2-oxazolina e a sua polimerização, em solução e em massa, assistidas por micro-ondas e pelo método convencional (térmico). As reações irradiadas por micro-ondas foram feitas empregando-se vaso aberto ou fechado, e nas polimerizações foram usados como iniciadores o iodeto de metila e o eterado de trifluoreto de boro. Os heterocíclicos e os polímeros produzidos foram caracterizados por espectroscopia na região do infravermelho e ressonância magnética nuclear de núcleo de hidrogênio. Para as reações assistidas por micro-ondas os rendimentos foram bons e compatíveis com os obtidos pelo método convencional. Para a reação de síntese da 2-fenil-2-oxazolina o rendimento ficou na faixa de 70% e de suas polimerizações em torno de 80%, sendo as reações irradiadas por micro-ondas realizadas em um tempo reacional muito inferior ao do método térmico. A técnica de irradiação de micro-ondas para as reações estudadas se mostrou eficiente para os parâmetros utilizados na síntese do monômero e na sua polimerização em massa. / Currently, microwave irradiation has been recommended as a good source of energy for the realization of organic synthesis, due to a number of advantages that this new technology presents. However, there are few studies on polymerization assisted by microwave. In this work were the synthesis of 2-phenyl-2-oxazoline and their polymerization in solution and in mass, assisted by microwave and conventional method (thermal). The reactions by microwave irradiation were made employing an open or closed vessel, and polymerization initiators were used as the methyl iodide and the ethereal boron trifluoride. The heterocyclic polymers were characterized by infrared spectroscopy and nuclear magnetic resonance of the hydrogen nucleus. For the reactions assisted microwave yields were good and consistent with those obtained by conventional method. For the reaction of synthesis of 2-phenyl-2-oxazoline income was in the range of 70% and its polymerization was around 80%, and the reactions by microwave irradiation performed in a reaction time much lower than the thermal method . The technique of microwave irradiation for the reactions studied was efficient for the parameters used in the synthesis of the monomer and its polymerization in bulk.

Ce travail décrit d'abord l’élaboration de nanogels hydrophiles stimulables, sensibles à un changement de pH et à un environnement où les propriétés d’oxydo-réduction peuvent varier. Ils ont été synthétisés en milieu dilué, d’une part, et en émulsion inverse, d’autre part; dans les deux cas à partir d’un copolymère statistique composé d’unités 2-éthyl-2-oxazoline et éthylène imine. Ces nanogels n’ont pas montré d’interactions spécifiques avec des protéines telles que la BSA et se sont avérés non-toxiques in vitro. Une plateforme à base d’un copolymère POx statistique porteur de fonctions aldéhydes a par ailleurs permis d’accéder à une librairie de POx, incluant des structures greffées et réticulées. Enfin, l’autoassemblage en solution d’un copolymère à blocs de type poly(2-methyl-oxazoline)-bpoly(2-isopropyl-2-oxazoline) (PMeOx-b-PiPrOx), a été étudié en détail. Des micelles ont été observées à des temps courts au-dessus du point trouble du PiPrOx. Pour des temps plus longs, la formation de fibres et de micelles réticulées physiquement ont été mise en évidence, comportement expliqué par la cristallisation des chainesde PiPrOx stabilisées par les blocs PMeOx hydrophiles. / This PhD work is based on the design of poly(2-oxazoline) (POx)hydrogels and nanogels, by chemical or physical cross-linking, aimed to be used for biomedical applications. Nanogels were first prepared in dilute media and in inverse emulsion based on a statistical copolymer made of 2-ethyl-2-oxazoline and ethyleneimine units. These stimuli-responsive nanogels were swelling in acidic media and were cleaved in reductive environment. They proved to be non-cytotoxic and act as protein repellent. Second, a reactive platform based on a statistical POx polymerbearing aldehyde functionalities was engineered, enabling the synthesis of graft and cross-linked POx. Last, a block copolymer made of 2-methyl- and 2-isopropyl-2-oxazoline units, proved to self-assemble into micelles when heated above its LCST,for a short period of time (< 1h30). When annealed for a longer time (> 1h30),crystallization-driven self-assembly led to the formation of different morphologies(fiber rods and cross-linked micelles).

In the latest years, many studies especially on characterization and synthesis of polyoxazolines have been made. During these studies, new polyoxazolines such as poly(2-isopropyl-2-oxazoline) (PIPOX), poly(2-(3-butenyl)-2-oxazoline) (PBOX) and modified PBOX were synthesized. However, there has been no investigation on their thermal characteristics such as thermal stability and thermal degradation products. In this study, thermal degradation characteristics, thermal degradation products and thermal stability of PIPOX, PBOX and modified PBOX polymers PBOX-Perf, PBOX-Thiop, PBOX-Sug, PBOX-SP and PBOX-TP were investigated. In this study mercaptans 1H,1H,2H,2H-perfluoro-octanethiol, 3-mercapto-1,2 propanediol, thio-&beta / -D-glucose derivative and their mixture were used in PBOX modifications. The effect of modification of PBOX with different mercaptans on thermal characteristics was also analyzed. For the PIPOX, formations of protonated monomer and oligomers from dimer to heptamer were observed. However, when the isopropyl group changes with 3-butenyl group, protonated oligomers up to trimer were observed because the crosslinking formed during the polymerization of unsaturated butenyl inhibited the production of oligomers. In addition to this, thermal degradation at lower temperatures was observed. The change in thermal stability and thermal degradation products were observed as a result of modification of PBOX with different mercaptans. Unlike PBOX-Sug thermal degradation started at very low temperatures for PBOX-Thiop and PBOX-Perf. This degradation observed at lower temperatures disappeared for PBOX-SP and PBOX-TP. For PBOX-Perf, PBOX-Sug and PBOX- Thiop, decomposition of side chains at low temperatures and decomposition of the main chain at high temperatures were observed. Although the same thermal degradation behavior for PBOX-TP and PBOX-Thiop was expected, since PBOX-TP was obtained as a result of modification of PBOX with high amounts of mercaptan used in PBOX-Thiop and small amounts of mercaptan used in the PBOX-Perf, the results show that neither PBOX-Thiop nor PBOX-Perf thermal degradation behavior are dominant. This is also valid for PBOX-SP. PBOX-SP has higher thermal stability when compared to PBOX-Sug.

Atualmente, a irradiação por micro-ondas tem se mostrado uma boa fonte de energia para a realização de sínteses orgânicas, devido a uma série de vantagens que essa nova tecnologia apresenta. Entretanto, ainda existem poucos estudos sobre polimerizações assistidas por micro-ondas. Neste trabalho foram realizadas a síntese da 2-fenil-2-oxazolina e a sua polimerização, em solução e em massa, assistidas por micro-ondas e pelo método convencional (térmico). As reações irradiadas por micro-ondas foram feitas empregando-se vaso aberto ou fechado, e nas polimerizações foram usados como iniciadores o iodeto de metila e o eterado de trifluoreto de boro. Os heterocíclicos e os polímeros produzidos foram caracterizados por espectroscopia na região do infravermelho e ressonância magnética nuclear de núcleo de hidrogênio. Para as reações assistidas por micro-ondas os rendimentos foram bons e compatíveis com os obtidos pelo método convencional. Para a reação de síntese da 2-fenil-2-oxazolina o rendimento ficou na faixa de 70% e de suas polimerizações em torno de 80%, sendo as reações irradiadas por micro-ondas realizadas em um tempo reacional muito inferior ao do método térmico. A técnica de irradiação de micro-ondas para as reações estudadas se mostrou eficiente para os parâmetros utilizados na síntese do monômero e na sua polimerização em massa. / Currently, microwave irradiation has been recommended as a good source of energy for the realization of organic synthesis, due to a number of advantages that this new technology presents. However, there are few studies on polymerization assisted by microwave. In this work were the synthesis of 2-phenyl-2-oxazoline and their polymerization in solution and in mass, assisted by microwave and conventional method (thermal). The reactions by microwave irradiation were made employing an open or closed vessel, and polymerization initiators were used as the methyl iodide and the ethereal boron trifluoride. The heterocyclic polymers were characterized by infrared spectroscopy and nuclear magnetic resonance of the hydrogen nucleus. For the reactions assisted microwave yields were good and consistent with those obtained by conventional method. For the reaction of synthesis of 2-phenyl-2-oxazoline income was in the range of 70% and its polymerization was around 80%, and the reactions by microwave irradiation performed in a reaction time much lower than the thermal method . The technique of microwave irradiation for the reactions studied was efficient for the parameters used in the synthesis of the monomer and its polymerization in bulk.

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal.

No presente trabalho, foi desenvolvida uma metodologia one-pot para obtenção de produtos 4-cloro-1-hidroxinaftaleno-2-oxazolinas (Cl-HNO) 4, utilizando um excesso de SOCl2 a partir da amida 3a. Para a formação do produto de interesse 4 foi desenvolvida uma proposta mecanística para a simultânea ciclização do anel 2- oxazolina e halogenção na porção do anel naftóico através de espectrometria de massas de alta resolução, difração de raios-x e cálculos teóricos. Em seguida, a hidrólise de 4 levou ao produto 5 com nova inversão de configuração no C4. Para funcionalização do ácido 5, foram reagidos grupos aminas e álcoois, conduzindo a uma pequena biblioteca de compostos inéditos com propriedades fluorescentes (6a-e, 7a-e) com &#934;f 0.8%-1.6%. Testes biológicos contra cepas de fungos foram realizadas. Em uma segunda etapa do trabalho, foi realizada a aplicação do anel 2-oxazolínico como ligantes em reações de acoplamento cruzado do tipo Suzuki-Miyaura. A síntese dos ligantes foi realizada em apenas dois passos reacionais, partindo das amidas 3a-c reagidas com Deoxo-Flúor® levando a três diferentes ligantes 8a-c. Os mesmos foram testados, e o ligante 8a levou aos produtos de acoplamento 9a-m com os melhores rendimentos de 59% a 95%. / In this work, we developed a new one-pot method for synthesizing 4-chlorinated 1- hydroxynaphthaleno-2-oxazoline (2-HNO) 4 by subjecting amide 3a to excess SOCl2. A mechanism for the formation of 4 is proposed, which involves simultaneous cyclization to form the 2-oxazoline ring and halogenation of the 2-hyrdoxynaphthalene ring. We present supporting evidence for this mechanism in the form of high resolution mass spectrometry, x-ray crystallography and theoretical calculations. Hydrolysis of 4 led to product 5 with inversion of configuration at C-4, confirmed by NMR spectra. To functionalize the acid 5, amines and alcohols were reacted with acid 5, leading to a small library of novel compounds having fluorescent properties (6a-e, 7a-e) with &#934;f 0.8%-1.6%. Furthermore, the library of compounds were used in biological testing against various strains of fungi. In the second stage of this work, we explored the application of the 2-oxazoline ring, through its use as a ligand in Suzuki-Miyaura cross-coupling reactions. The preparation of the ligands were obtained in only two reaction steps, starting from amides 3a-c were reacted with Deoxo-Fluor®, leading to three different ligands 8a-c, respectively. The same were tested, and the ligand 8a provided coupling products 9a-m in good yields of 59% to 95%.

No presente trabalho, foi desenvolvida uma metodologia one-pot para obtenção de produtos 4-cloro-1-hidroxinaftaleno-2-oxazolinas (Cl-HNO) 4, utilizando um excesso de SOCl2 a partir da amida 3a. Para a formação do produto de interesse 4 foi desenvolvida uma proposta mecanística para a simultânea ciclização do anel 2- oxazolina e halogenção na porção do anel naftóico através de espectrometria de massas de alta resolução, difração de raios-x e cálculos teóricos. Em seguida, a hidrólise de 4 levou ao produto 5 com nova inversão de configuração no C4. Para funcionalização do ácido 5, foram reagidos grupos aminas e álcoois, conduzindo a uma pequena biblioteca de compostos inéditos com propriedades fluorescentes (6a-e, 7a-e) com &#934;f 0.8%-1.6%. Testes biológicos contra cepas de fungos foram realizadas. Em uma segunda etapa do trabalho, foi realizada a aplicação do anel 2-oxazolínico como ligantes em reações de acoplamento cruzado do tipo Suzuki-Miyaura. A síntese dos ligantes foi realizada em apenas dois passos reacionais, partindo das amidas 3a-c reagidas com Deoxo-Flúor® levando a três diferentes ligantes 8a-c. Os mesmos foram testados, e o ligante 8a levou aos produtos de acoplamento 9a-m com os melhores rendimentos de 59% a 95%. / In this work, we developed a new one-pot method for synthesizing 4-chlorinated 1- hydroxynaphthaleno-2-oxazoline (2-HNO) 4 by subjecting amide 3a to excess SOCl2. A mechanism for the formation of 4 is proposed, which involves simultaneous cyclization to form the 2-oxazoline ring and halogenation of the 2-hyrdoxynaphthalene ring. We present supporting evidence for this mechanism in the form of high resolution mass spectrometry, x-ray crystallography and theoretical calculations. Hydrolysis of 4 led to product 5 with inversion of configuration at C-4, confirmed by NMR spectra. To functionalize the acid 5, amines and alcohols were reacted with acid 5, leading to a small library of novel compounds having fluorescent properties (6a-e, 7a-e) with &#934;f 0.8%-1.6%. Furthermore, the library of compounds were used in biological testing against various strains of fungi. In the second stage of this work, we explored the application of the 2-oxazoline ring, through its use as a ligand in Suzuki-Miyaura cross-coupling reactions. The preparation of the ligands were obtained in only two reaction steps, starting from amides 3a-c were reacted with Deoxo-Fluor®, leading to three different ligands 8a-c, respectively. The same were tested, and the ligand 8a provided coupling products 9a-m in good yields of 59% to 95%.

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal

Poly(2-ethyl-2-oxazoline) (PEOX) is a nonionic, synthetic polymer which is soluble in both a variety organic solvents and water. The negative entropy of mixing of this polymer in aqueous solution suggested that it adopts a rigid conformation such as a helix in aqueous solution. Hydrogen bonding between PEOX and water molecules is thought to facilitate a special conformation that is specific to aqueous solution. The intent of this work is to investigate the conformation of PEOX in aqueous solution and consequently propose the mechanism by which it would adsorb onto cellulose and make it a valuable additive in paper processing. This work ultimately contributes to the greater matter of understanding the mechanisms by which water solvates nonionic polymers. Viscometry measurements of PEOX in water show that its shape scales similar to a random coil and that its molecules collapse in the presence of sodium chloride. Investigation into the molecular structure of PEOX through molecular scale simulations have revealed that although a rigid helical conformation does not exist, the potential exists for PEOX to have secondary helical structure in both water and other solvents. Without the rigid predicted structure, however, it is not surprising that PEOX does not adsorb well on cellulose. Comparing this folded helical conformation to a random coil conformation reveals that the random coil produces a lower energy system in water.