"Laser micromachining is essential in today’s advanced manufacturing, of e.g., printed circuit boards and electronic components, especially laser microdrilling. Continued demands for miniaturization, in particular of high-performance MEMS components, have generated a need for smaller holes and microvias as well as smaller and more controllable spot-welds than ever before. All these neeeds require smaller taper of the microholes and more stable and controlled laser micromachining process than currently available. Therefore considerable attention must be focused on the laser process parameters that control critical specifications such as accuracy of the hole size as well as its shape and taper angle, all of which highly influence quality of the laser micromachining processes. Determination of process parameters in laser micromachining, however, is expensive because it is done mostly by trial and error. This Dissertation attempts to reduce the experimental time and cost associated with establishing the process parameters in laser micromachining by employing analytical, computational, and experimental solutions (ACES) methodology."

Depuis une décennie se rencontrent de plus en plus nombreux des malades d'un genre particulier. Présentant des symptômes variés et souvent invalidants, ils en attribuent la responsabilité à des facteurs environnementaux très spécifiques : produits de la chimie de synthèse pour les personnes hypersensibles chimiques multiples (MCS), rayonnements électromagnétiques artificiels pour les personnes électro-hypersensibles (EHS). La définition, l'existence même de ces maladies font l'objet de controverses autant politiques que scientifiques, que la littérature sociologique a déjà bien décrites. L'expérience de leurs victimes est en revanche peu connue – ce à quoi cette recherche propose de remédier, en s'interrogeant sur ce que signifie concrètement le fait de souffrir d'une hypersensibilité environnementale.Quatre manières de répondre à cette question seront explorées. La première renvoie à l'expérience de l'hypersensibilité, à ses manifestations symptomatiques ressenties dans l'évidence simultanée de leur corporéité et de leur origine environnementale. La seconde recouvre le raisonnement étiologique grâce auquel cette origine est reconnue et crédibilisée. La troisième a trait aux stratégies que les hypersensibles déploient contre leur mal, qui s'inscrivent dans le double registre du soin et de la mise à distance. Enfin, dernière dimension de leur expérience : la profonde transformation des rapports sociaux qu'entraîne le fait de souffrir d'une maladie controversée. Il s'agira d'étudier comment ces quatre dimensions se nouent, à l'aide d'une démarche ethnographique et inductive. / For about two decades, the number of people claiming to suffer from multiple chemical sensitivity or electromagnetic hypersensitivity has been steadily increasing in France.T hese persons experience various and sometimes quite disabling somatic symptoms, which they attribute to exposure either to chemicals or to anthropogenic electromagnetic fields. The definition, and even the existence of these diseases are controversial. They are not legally recognized and their victims resort to self-diagnosis. However, this is not a cognitively easy task. Its implications are also far-reaching: it results in a radical change in their views of themselves, their environment and their community, as well as significant alterations in their daily lives and behaviour. It is thus an interesting phenomenon to explain for a cognitive sociology concerned with how mental representations evolve and influence conduct. Such is the purpose of this thesis. The analysis relies mostly on ethnographic materials and is conducted in a comprehensive and ecological perspective. It falls into three stages. The first one is devoted to an exploration of the controversies aroused by environmental sensitivities, so as to clarify their lack of legitimacy. The second one deals with the subjective experience and biographical trajectories of environmentally sensitive persons. The last one tries to explain the appearance and persistence of their conviction that they are hypersensitive with a utilitarian model in which emotions play a prominent role. To conclude, a comparison is outlined with other epidemics of medically unexplained symptoms.

Background: Most of our biomedical knowledge is only accessible through texts. The biomedical literature grows exponentially and PubMed comprises over 18.000.000 literature abstracts. Recently much effort has been put into the creation of biomedical ontologies which capture biomedical facts. The exploitation of ontologies to explore the scientific literature is a new area of research. Motivation: When people search, they have questions in mind. Answering questions in a domain requires the knowledge of the terminology of that domain. Classical search engines do not provide background knowledge for the presentation of search results. Ontology annotated structured databases allow for data-mining. The hypothesis is that ontology annotated literature databases allow for text-mining. The central problem is to associate scientific publications with ontological concepts. This is a prerequisite for ontology-based literature search. The question then is how to answer biomedical questions using ontologies and a literature corpus. Finally the task is to automate bibliometric analyses on an corpus of scientific publications. Approach: Recent joint efforts on automatically extracting information from free text showed that the applied methods are complementary. The idea is to employ the rich terminological and relational information stored in biomedical ontologies to markup biomedical text documents. Based on established semantic links between documents and ontology concepts the goal is to answer biomedical question on a corpus of documents. The entirely annotated literature corpus allows for the first time to automatically generate bibliometric analyses for ontological concepts, authors and institutions. Results: This work includes a novel annotation framework for free texts with ontological concepts. The framework allows to generate recognition patterns rules from the terminological and relational information in an ontology. Maximum entropy models can be trained to distinguish the meaning of ambiguous concept labels. The framework was used to develop a annotation pipeline for PubMed abstracts with 27,863 Gene Ontology concepts. The evaluation of the recognition performance yielded a precision of 79.9% and a recall of 72.7% improving the previously used algorithm by 25,7% f-measure. The evaluation was done on a manually created (by the original authors) curation corpus of 689 PubMed abstracts with 18,356 curations of concepts. Methods to reason over large amounts of documents with ontologies were developed. The ability to answer questions with the online system was shown on a set of biomedical question of the TREC Genomics Track 2006 benchmark. This work includes the first ontology-based, large scale, online available, up-to-date bibliometric analysis for topics in molecular biology represented by GO concepts. The automatic bibliometric analysis is in line with existing, but often out-dated, manual analyses. Outlook: A number of promising continuations starting from this work have been spun off. A freely available online search engine has a growing user community. A spin-off company was funded by the High-Tech Gründerfonds which commercializes the new ontology-based search paradigm. Several off-springs of GoPubMed including GoWeb (general web search), Go3R (search in replacement, reduction, refinement methods for animal experiments), GoGene (search in gene/protein databases) are developed.

The capability of changing beliefs upon new information in a rational and efficient way is crucial for an intelligent agent. Belief change therefore is one of the central research fields in Artificial Intelligence (AI) for over two decades. In the AI literature, two different kinds of belief change operations have been intensively investigated: belief update, which deal with situations where the new information describes changes of the world; and belief revision, which assumes the world is static. As another important research area in AI, reasoning about actions mainly studies the problem of representing and reasoning about effects of actions. These two research fields are closely related and apply a common underlying principle, that is, an agent should change its beliefs (knowledge) as little as possible whenever an adjustment is necessary. This lays down the possibility of reusing the ideas and results of one field in the other, and vice verse. This thesis aims to develop a general framework and devise computational models that are applicable in reasoning about actions. Firstly, I shall propose a new framework for iterated belief revision by introducing a new postulate to the existing AGM/DP postulates, which provides general criteria for the design of iterated revision operators. Secondly, based on the new framework, a concrete iterated revision operator is devised. The semantic model of the operator gives nice intuitions and helps to show its satisfiability of desirable postulates. I also show that the computational model of the operator is almost optimal in time and space-complexity. In order to deal with the belief change problem in multi-agent systems, I introduce a concept of mutual belief revision which is concerned with information exchange among agents. A concrete mutual revision operator is devised by generalizing the iterated revision operator. Likewise, a semantic model is used to show the intuition and many nice properties of the mutual revision operator, and the complexity of its computational model is formally analyzed. Finally, I present a belief update operator, which takes into account two important problems of reasoning about action, i.e., disjunctive updates and domain constraints. Again, the updated operator is presented with both a semantic model and a computational model.

Welche Chancen und Risiken ergeben sich durch Stiftungsengagements bzw. -arrangements im schulnahen Umfeld? Ziel soll es sein, die Entscheidungsfelder in dieser speziellen Kooperationsform zu systematisieren und einen ersten generalisierbaren, praxisrelevanten Überblick anbieten zu können. Aus erziehungswissenschaftlicher Sicht interessiert insbesondere, ob sich Veränderungen in Bildungsinstitutionen und bei pädagogischen Leitvorstellungen nachweisen lassen, die auf Kooperationsaktivitäten oder –bestrebungen zurückgehen. Es ist zu prüfen, ob sich diese Veränderungen perspektivisch negativ oder positiv auf den gesellschaftlichen Bildungsauftrag der Schule und auf ihr untergeordnete pädagogische Domänen auswirken. Darüber hinaus versteht sich die Untersuchung als Pionierarbeit, die eine Lücke in der Forschung über normative Motive in der Arbeit pädagogischer und gemeinnützlicher Institutionen schließt und eine Methode entwickelt, die weitere systematische Untersuchungen in diesem Bereich erleichtert. Diese Arbeit ist als qualitative Studie konzipiert. Die vorliegende Arbeit arbeitet empirisch, indem sie bereits vorhandene Erfahrungswerte abfragt und diese systematisiert. Auf der anderen Seite arbeitet sie explorativ, indem sie blinde Flecke im Entscheidungsfeld theoretisch herleitet, überprüft und in eine Entscheidungsmatrix überführt.

Esta tese apresenta o estudo sobre microconformação, no caso microextrusão de quatro materiais diferentes, um aço SAE 1020, um aço inoxidável AISI 304, um alumínio AA6531 e um latão ASTM C34000. Para avaliar o efeito do tamanho da peça sobre o processo de microextrusão, dois tamanhos de corpos de prova foram utilizados, um com ∅ 4 mm e outro com ∅ 1 mm. Para cada tamanho de corpo de prova, três ângulos de extrusão foram utilizados, 30°, 45° e 60°. A primeira parte do trabalho se resume a caracterização dos materiais, com analise química e metalográfica. Após a caracterização dos materiais, as curvas de escoamento através do ensaio de compressão utilizando dois tamanhos de corpos de prova foram feitos em todos os materiais. O atrito foi determinado utilizando o ensaio de anel de atrito com três tamanhos diferentes de corpos de prova. As curvas de calibração foram feitas utilizando o software SIMUFACT. Os ensaios de extrusão foram feitos em uma máquina de ensaio universal com capacidade de captura de dados como força e deslocamento. Um modelo matemático foi utilizado para comparar a força de extrusão calculada com o medido no processo. Os resultados indicam que as curvas de escoamento de tamanho macro podem ser aplicadas a peças de tamanho meso. O atrito medido pelo ensaio de anel de atrito mostrou que os valores de atrito de tamanho micro tem um pequeno valor maior que para tamanho macro. Os valores de força de extrusão calculada e medido no ensaio para peças de tamanho meso tem boa aproximação com diferença de 3,2% para o aço inoxidável. Para peça de tamanho micro, a diferença entre o valor medido e o calculado aumenta chegando a diferença de 995% para o corpos de prova de aço comum. / This thesis presents the study about microforming, in this case microextrusion of the four different materials, an SAE 1020 steel, an AISI 304 stainless steel, an AA6531 aluminum and a C34000 brass. To evaluate the size effect about microextrusion process, two sizes of specimens were used, with a ∅ 4 mm and another with ∅ 1 mm. For each size of specimen, three extrusion angles were used, 30 °, 45 ° and 60 °. The first part of the work was to materials characterizations with chemical and metallographic analysis. Following the materials characterization, the flow stress curves was made using the compression test with two sizes of specimens. The friction was determined using the friction ring test with the three different size. Calibration curves were performed using the software SIMUFACT . The extrusion tests were performed in a universal testing machine capable of capturing such as force and displacement data. A mathematical model was used to compare the extrusion force it was calculated and the force measured in microextrusion. The results indicate that the flow stress curves of macro size can be applied to meso sizes. The ring friction test indicate that the friction values of the micro size has a small value greater than macro size. The extrusion force calculated and measured in the test to meso size has good approximation with a difference of 3.2% in the stainless steel. To pieces of the micro size, the difference between the measured and calculated force increases 995% for the samples of SAE 1020 steel.

Esta tese apresenta o estudo sobre microconformação, no caso microextrusão de quatro materiais diferentes, um aço SAE 1020, um aço inoxidável AISI 304, um alumínio AA6531 e um latão ASTM C34000. Para avaliar o efeito do tamanho da peça sobre o processo de microextrusão, dois tamanhos de corpos de prova foram utilizados, um com ∅ 4 mm e outro com ∅ 1 mm. Para cada tamanho de corpo de prova, três ângulos de extrusão foram utilizados, 30°, 45° e 60°. A primeira parte do trabalho se resume a caracterização dos materiais, com analise química e metalográfica. Após a caracterização dos materiais, as curvas de escoamento através do ensaio de compressão utilizando dois tamanhos de corpos de prova foram feitos em todos os materiais. O atrito foi determinado utilizando o ensaio de anel de atrito com três tamanhos diferentes de corpos de prova. As curvas de calibração foram feitas utilizando o software SIMUFACT. Os ensaios de extrusão foram feitos em uma máquina de ensaio universal com capacidade de captura de dados como força e deslocamento. Um modelo matemático foi utilizado para comparar a força de extrusão calculada com o medido no processo. Os resultados indicam que as curvas de escoamento de tamanho macro podem ser aplicadas a peças de tamanho meso. O atrito medido pelo ensaio de anel de atrito mostrou que os valores de atrito de tamanho micro tem um pequeno valor maior que para tamanho macro. Os valores de força de extrusão calculada e medido no ensaio para peças de tamanho meso tem boa aproximação com diferença de 3,2% para o aço inoxidável. Para peça de tamanho micro, a diferença entre o valor medido e o calculado aumenta chegando a diferença de 995% para o corpos de prova de aço comum. / This thesis presents the study about microforming, in this case microextrusion of the four different materials, an SAE 1020 steel, an AISI 304 stainless steel, an AA6531 aluminum and a C34000 brass. To evaluate the size effect about microextrusion process, two sizes of specimens were used, with a ∅ 4 mm and another with ∅ 1 mm. For each size of specimen, three extrusion angles were used, 30 °, 45 ° and 60 °. The first part of the work was to materials characterizations with chemical and metallographic analysis. Following the materials characterization, the flow stress curves was made using the compression test with two sizes of specimens. The friction was determined using the friction ring test with the three different size. Calibration curves were performed using the software SIMUFACT . The extrusion tests were performed in a universal testing machine capable of capturing such as force and displacement data. A mathematical model was used to compare the extrusion force it was calculated and the force measured in microextrusion. The results indicate that the flow stress curves of macro size can be applied to meso sizes. The ring friction test indicate that the friction values of the micro size has a small value greater than macro size. The extrusion force calculated and measured in the test to meso size has good approximation with a difference of 3.2% in the stainless steel. To pieces of the micro size, the difference between the measured and calculated force increases 995% for the samples of SAE 1020 steel.

Esta tese apresenta o estudo sobre microconformação, no caso microextrusão de quatro materiais diferentes, um aço SAE 1020, um aço inoxidável AISI 304, um alumínio AA6531 e um latão ASTM C34000. Para avaliar o efeito do tamanho da peça sobre o processo de microextrusão, dois tamanhos de corpos de prova foram utilizados, um com ∅ 4 mm e outro com ∅ 1 mm. Para cada tamanho de corpo de prova, três ângulos de extrusão foram utilizados, 30°, 45° e 60°. A primeira parte do trabalho se resume a caracterização dos materiais, com analise química e metalográfica. Após a caracterização dos materiais, as curvas de escoamento através do ensaio de compressão utilizando dois tamanhos de corpos de prova foram feitos em todos os materiais. O atrito foi determinado utilizando o ensaio de anel de atrito com três tamanhos diferentes de corpos de prova. As curvas de calibração foram feitas utilizando o software SIMUFACT. Os ensaios de extrusão foram feitos em uma máquina de ensaio universal com capacidade de captura de dados como força e deslocamento. Um modelo matemático foi utilizado para comparar a força de extrusão calculada com o medido no processo. Os resultados indicam que as curvas de escoamento de tamanho macro podem ser aplicadas a peças de tamanho meso. O atrito medido pelo ensaio de anel de atrito mostrou que os valores de atrito de tamanho micro tem um pequeno valor maior que para tamanho macro. Os valores de força de extrusão calculada e medido no ensaio para peças de tamanho meso tem boa aproximação com diferença de 3,2% para o aço inoxidável. Para peça de tamanho micro, a diferença entre o valor medido e o calculado aumenta chegando a diferença de 995% para o corpos de prova de aço comum. / This thesis presents the study about microforming, in this case microextrusion of the four different materials, an SAE 1020 steel, an AISI 304 stainless steel, an AA6531 aluminum and a C34000 brass. To evaluate the size effect about microextrusion process, two sizes of specimens were used, with a ∅ 4 mm and another with ∅ 1 mm. For each size of specimen, three extrusion angles were used, 30 °, 45 ° and 60 °. The first part of the work was to materials characterizations with chemical and metallographic analysis. Following the materials characterization, the flow stress curves was made using the compression test with two sizes of specimens. The friction was determined using the friction ring test with the three different size. Calibration curves were performed using the software SIMUFACT . The extrusion tests were performed in a universal testing machine capable of capturing such as force and displacement data. A mathematical model was used to compare the extrusion force it was calculated and the force measured in microextrusion. The results indicate that the flow stress curves of macro size can be applied to meso sizes. The ring friction test indicate that the friction values of the micro size has a small value greater than macro size. The extrusion force calculated and measured in the test to meso size has good approximation with a difference of 3.2% in the stainless steel. To pieces of the micro size, the difference between the measured and calculated force increases 995% for the samples of SAE 1020 steel.

Les disparités socio-spatiales sont à la fois une cause et une conséquence des inégalités sociales. Cette thèse interroge le rôle des inégalités sociales dans la formation et la correction des disparités socio-spatiales. Elle est composée de trois essais, qui éclairent différentes facettes de ce questionnement, faisant intervenir les migrations résidentielles et les politiques publiques. Le premier essai analyse la pertinence des orientations stratégiques nationales de la politique de développement rural à l'aune du débat philosophique sur la justice sociale. Il met en évidence le rôle que joue et que devrait jouer l'objectif de réduction des inégalités sociales dans la définition d'une politique agissant sur les disparités socio-spatiales. Les deux essais suivants montrent comment les inégalités sociales génèrent des disparités socio-spatiales par le biais des mobilités résidentielles de longues et de courtes distances. Le second essai étudie les effets du sentiment d'aversion à l'inégalité locale et de la politique de redistribution du revenu sur les mobilités et les disparités interrégionales, dans le cadre théorique de la Nouvelle Economie Géographique. Le dernier essai examine comment les inégalités sociales conditionnent les choix résidentiels et induisent une ségrégation socio-spatiale au sein des aires urbaines françaises, à l'aide de modèles économétriques de choix discrets / Socio-spatial disparities are both a cause and a consequence of social inequalities. This thesis questions the role of social inequalities in the formation and correction of socio-spatial disparities. It is composed of three essays shedding light on different sides of this issue, involving residential migrations and public policies. The first essay analyses the relevance of the national strategic orientations of the rural development policy by the yardstick of the philosophical debate on social justice. It puts in evidence the role that play and should play the objective of reducing social inequalities in the definition of a policy acting on socio-spatial disparities. The two following essays show how social inequalities generate socio-spatial disparities through long and short distance residential moves. The second essay studies the effect of the feeling of aversion toward local inequality and of the income redistribution policy on interregional migrations and disparities, in the theoretical framework of the New Economic Geography. The last essay examines how social inequalities determine residential choices and produce socio-spatial segregation in the French urban areas, using econometric discrete choice models

The thesis is focused on Regulations requierements, on the whole certification process and on requirements of the Civil Aviation Authority on sailplane HpH 304 Sm with auxiliary engine Binder for start. The separate parts and the certification procedure in the whole are described. Main part of the thesis consists of check flight and suggestion of programme of check flight. Due to the fact that certification is an extensive process, this thesis tries to describe all important aspects of certification process, so it would create a view of plane certification process.