L'objectif de ces travaux a été de développer des vernis acrylate photo-polymérisables à 100% d'extrait sec, destinés à protéger des pièces thermoplastiques en polycarbonate contre les endommagements mécaniques, en particulier contre la rayure. Les relations entre la composition, la structure et les propriétés de ces revêtements ont été explorées. Pour ce faire ont été étudiées la morphologie, les propriétés thermomécaniques ainsi que la résistance à la rayure des matériaux. Cette dernière a été évaluée par des tests de micro-scratch. La cinétique de formation des réseaux polymères a elle aussi été étudiée, par photo-DSC. Tous les matériaux étudiés présentent, en analyse thermomécanique dynamique, un module élevé à l'état caoutchoutique ainsi qu'une large relaxation mécanique. Un vernis pétro-sourcé à 100% d'extrait sec, qualifié de standard, a servi de point de départ à ces travaux. Il a tout d'abord été comparé à un vernis commercial solvanté photo-polymérisable, spécialement conçu pour la protection de pièces thermoplastiques. Celui-ci s'est avéré être plus efficace en termes de résistance à la rayure. Dans un deuxième temps, a été étudiée l'influence sur les propriétés du vernis standard pétro-sourcé d'un monomère multicyclique entrant dans sa composition. La modification de son pourcentage n'a permis d'apporter aucun bénéfice en termes de résistance à la rayure. Des nanoparticules de silice, d'alumine ou de zircone, disponibles sous forme de dispersion dans un monomère acrylate, ont ensuite été incorporées dans le vernis standard pétro-sourcé. Une organisation particulière de la nano-silice et de la nano-alumine au sein des matériaux étudiés a pu être observée par microscopie électronique en transmission. Il a été constaté que le taux de charge doit être élevé pour observer une augmentation du module élastique et une amélioration de la résistance à la rayure du vernis (≥15% massique dans le cas de la nano-silice). Par ailleurs, l'ajout de 5% massique de nano-silice dans le vernis n'a conduit à aucune modification de sa cinétique de photo-polymérisation. Enfin, une partie des composés acrylate pétro-sourcés du vernis standard a été substituée par des acrylates bio-sourcés disponibles industriellement. La cinétique de photo-polymérisation des deux types de vernis est similaire. Les conclusions de la comparaison entre les vernis bio-sourcés et le vernis standard pétro-sourcé en termes de résistance à la rayure dépendent de l'épaisseur des revêtements étudiés. L'ajout d'un composé monoacrylate bio-sourcé à la formulation des vernis tend à améliorer la recouvrance élastique des revêtements de faible épaisseur. L'acrylate d'isobornyle est en particulier intéressant, car il a aussi tendance à retarder l'apparition des craquelures au cours de la rayure.

With the emergence of novel and more effective drug therapies, increased importance is being placed upon the methods by which these drugs are being delivered to the body. In conventional drug delivery systems, there is very little control over the release of drug. The effective concentration at the target site can be achieved by intermittent administration of grossly excessive doses, which, often results in constantly, unpredictable variations in plasma concentrations, with the risk of reaching levels below or above the therapeutic range leading to marked side effects. A plethora of formulation strategies mainly based on polymeric/lipid nanoparticles, are described in literature. Even though these systems are therapeutically advantageous in comparison to conventional systems, they remain insensitive to the changing metabolic states of the body although the symptoms of most metabolic diseases follow a rhythmic pattern.A more appropriate and effective approach of managing some of these conditions lies in the chronotherapy. This approach allows for pulsed or self-regulated drug delivery which is adjusted to the staging of biological rhythms, since the onset of certain diseases exhibits strong circadian temporal dependence. In order to reach the objective of mimicking the biophysical and biochemical processes of pathological states, many innovations in material design for drug delivery systems (DDS) that are able to release the therapeutic payload-on-demand were done to release the therapeutic agent only when it is required, according to the physiological need. The development of multidisciplinary research teams has brought huge advantages in the design, fabrication and utilization of such smart systems, especially in the pharmaceutical field. Interestingly, numerous smart polymeric materials exhibit a response to a specific stimulus. A step further, the elaboration of purpose-built monomers can give rise to compounds with tunable sensitivities or multi-stimuli responsiveness. These smart polymers demonstrate an active responsiveness to environmental (or external) signals and change their physicochemical properties as designed (e.g. conformation, solubility, shape, charge or size). As far as the stimuli are concerned, they consist of physical (e.g. temperature, ultrasound, light, electricity, magnetic or mechanical stress), chemical (e.g. pH, ionic strength) and biological signals (e.g. enzymes, biomolecules). Due to the intrapersonal variabilities which may make internal stimuli hazardous, externally controlled systems rely on externally applied stimuli that are produced by stimuli-generating devices, which results in pulsed drug delivery. This type of delivery may be rapid and allows a transient release of a determined amount of drug within a short period of time immediately after a pre-determined off-release period. A novel strategy for the formation of multi-stimuli responsive materials endowed with pH, magnetic and light sensitivity was achieved. The approach relied on the incorporation of magnetic tetrahalogenoferrate(III) anions along a polymeric backbone based on poly(2-(N,N-dimethylamino) ethyl meth-acrylate) (PDMAEMA). Starting from the same PDMAEMA, quaternized pending amine groups with various halide derivatives gave rise to magnetic materials after anion metathesis. Measuring the magnetic susceptibility of these materials exhibited that the magnetic susceptibility increased as the substituted group size decreased (become smaller) which was apparently related to the steric hindrance around the ionic pendants. Additionally, a good correlation between the magnetic susceptibility and ferric content was found. Additional experimental and theoretical Raman analyses allowed the determination of the nature of the magnetic species constituting the materials. This strategy further offers the opportunity to tailor the magnetic response through partial ammonium salt formation. In order to merge the magnetic properties of ferric-based materials with another stimuli-responsive functionality, random copolymers containing DMAEMA (D) with diazobenzene (A) unit were prepared. So, three copolymers PDA were synthesized (with targeted D/A ratios 4/6 (PDA4), 6/4 (PDA6) and 8/2 (PDA8)). Meanwhile, different degrees of amine quaternization (10, 50 and 100 %) were applied, which led to the following polymeric salts PDAX/Y where X = 4, 6, 8 (referring to the percentage of the DMAEMA unit) and Y = 10, 50 and 100 (referring to the percentage of quaternized amine groups). Finally, the aforementioned materials were converted into magnetic polymers by anion exchange. As a result, magnetic responses correlated well with amount of iron oxide in these compounds and the amount of ionic pending groups along the backbone. Moreover, the remaining tertiary amines conferred pH sensitivity to the polymers whereas the diazobenzene units ensured light responsiveness through the well-established trans-to-cis isomerization.In order to functionalize these materials in the pharmaceutical field, an intelligent delivery system was prepared. Firstly, an attempt to formulate riboflavin-5’-phosphate sodium (RPS) loaded on PDA8 microspheres was made using double emulsion evaporation method. Meanwhile, prednisolone (PRD) microspheres were prepared using s/o/w emulsion technique. Subsequently, coating systems of cochineal red tablets were developed. These tablets were coated with polymer solution (using each of three types of copolymers: PDA8, PDA6, and PDA4) until the desired percentage of the coating was achieved (10, 15, and 20 % w/w). The cumulative release profiles of cochineal red tablets coated with PDA8, PDA6, and PDA4 showed a pH-sensitive release behavior. The release in the neutral media (pH ≈ 7.0) was very slow (less than 3 % after one hour). Then, after changing the pH to 1.2, an increase in the release of cochineal was observed. Furthermore, the cumulative release of cochineal red was at the highest value for the PDA8 and the lowest for PDA4 depending on the percentage of PDMAEMA moieties. Moreover, by increasing the percentage of the coating from (10, 15 to 20 % w/w), the cumulative release of cochineal decreased. Therefore, the copolymer PDAX can be used for controlling the release of drug by changing the pH value.Finally, the cochineal tablets coated with PDA6 (10 %) showed features of light sensitivity. The release of cochineal red from coated tablets was only due to the switching in the conformational trans/cis isomerization of azobenzene moieties upon irradiation, which was confirmed by comparing the release of coated tablets with uncoated tablets upon irradiation. / Doctorat en Sciences biomédicales et pharmaceutiques (Pharmacie) / info:eu-repo/semantics/nonPublished

Made available in DSpace on 2015-05-14T13:21:29Z (GMT). No. of bitstreams: 1 arquivototal.pdf: 3046844 bytes, checksum: 9fc0abd4ac9137e94ab4a27445373f2f (MD5) Previous issue date: 2013-08-29 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES / In this study, a micro-flow-batch analyzer (μFBA) using an in-line cadmium reduction microcolumn for the photometric determination of nitrate and nitrite in dairy samples was developed. The method is based on the Griess-Llosvay reaction and measuring of the absorbance at 540 nm using a green LED integrated into the μFBA built in the urethane-acrylate resin. Initially, the natural nitrite ion content of natural dairy sample product is determined in the micro-mixing chamber, while the nitrate is reduced to nitrite in the micro-column coupled to the micro cadmium sponge and then determined as in the micro-chamber nitrite. content of nitrate ions was estimated from the difference between the first and second determination. The analytical curve for nitrate and nitrite was linear in the work range of 10.0 100.0 μg L 1 with a correlation coefficient of 0.992 and 0.998, respectively. The limit of detection and relative standard deviation were estimated at 0.39 μg L 1 and < 1.7 % (n = 5) for nitrite and, 0.41 μg L 1 and < 1.3 % (n = 5) for nitrate. Comparing with the reference methods, no statistically significant differences were observed when applying the paired t-test at a 95% confidence level. The accuracy was assessed through recovery test (97.7 to 102.9 %). The proposed microsystem employed in-line cadmium sponge microcolumn presented satisfactory portability, robustness, flexibility, low-cost device and reduced chemicals consumption compared to recent methods. / Neste estudo, um analisador micro-flow-batch (μFBA) utilizando uma micro-coluna redutora de cádmio em linha foi desenvolvido para a determinação fotométrica de íons nitrato e nitrito em amostras de laticínios. O método empregado baseia-se na reação de Griess-Llosvay e a medição da absorbância foi realizada a 540 nm, utilizando um LED verde integrado na micro-câmara construída em resina fotopolimerizável uretano-acrilato. Inicialmente, o teor de íons nitritos natural da amostra de lacticínio é determinado na micro-câmara de mistura, enquanto que o nitrato é reduzido a nitrito na micro-coluna de cádmio esponjoso acoplada ao microssistema e posteriormente determinado na micro-câmara como nitrito. O teor de íons nitrato foi estimado a partir da diferença entre a segunda e a primeira determinação. A curva analítica para nitrato e para nitrito foi linear na faixa de trabalho de 10,0 a 100,0 μg L-1, com um coeficiente de correlação (r2) de 0,992 e 0,998, respectivamente. O limite de detecção e o desvio padrão relativo foi calculado em 0,39 μg L-1 e <1,7% (n = 5) para o nitrito, e 0,41 μg L-1 e <1,3% (n = 5) para o nitrato. Comparando-se com os métodos de referência, não foram observadas diferenças estatisticamente significativas quando se aplica o teste t pareado com nível de confiança de 95%. A exatidão do método foi avaliada através do teste de recuperação (97,7 a 102,9%). O microssistema proposto empregando a micro-coluna de cádmio esponjoso em linha apresentou portabilidade satisfatória, robustez, flexibilidade, aparelhagem simples e consumo reduzido de produtos químicos em relação aos métodos automáticos mais recentes.

Die Arbeit beschreibt die Synthese und Charakterisierung von amphiphilen Polyurethanen mit Emulgatoreigenschaften für die Polymerisation hydrophober Monomere in wässriger Phase. Der Emulgator wurde mit kolloid- und polymerchemischen Methoden hinsichtlich seiner grenzflächenaktiven Eigenschaften sowie einer Strukturbildung in wässriger Phase charakterisiert. Die Emulsionspolymerisation mit dem polymeren PU-Emulgator am Beispiel von Styrol ist untersucht worden. Dabei sind die Partikelgrössen und deren Verteilung in Abhängigkeit von Reaktionsparametern mittels Photonen-Korrelations-Spektroskopie und durch Fluss-Feldfluss-Fraktionierung (F-FFF) bestimmt worden. Weiterhin wurde mittels Dilatometrie und Reaktionskalometrie die Polymerisationskinetik untersucht. Die Partikelmorphologie konnte durch Festkörper-NMR modelliert werden. Durch Atomic Force Microscopy (AFM) im Tapping mode konnte die Oberfläche und die Phasenseparation der polymeren Phasen charakterisiert werden. / This paper describes the synthesis of a reactive amphiphilic polyurethane, and its use as an emulsifier for the emulsion polymerization of styrene. The colloid properties and the structure of the emulsifier in the aqueous phase have been investigated. When the acrylic polymerization is carried out with hydrophobic monomers, we obtain a composite particle structure. The variation of particle size and particle size distribution as a function of the reaction parameters was measured by light scattering methods and Flow-fieldflow-fractionation (F-FFF) . Through investigation by dilatometry and reaction calorimetry it was possible to compare the polymerization process with that of common emulsion polymerization. Solid State NMR analysis allowed us to develop a core-shell model for the composite particle structure, and to determine the presence of an interphase layer between core and shell. Atomic Force Microscopy (AFM) methods were used to characterize the surface of the films, and tapping mode AFM was used to characterize the polymer phase separation on the micro scale.

Polymer nanocomposites are promising materials for dielectrical use in high voltage applications and insulations. This work presents a study of nanocomposites based on poly(ethylene-co-butyl acrylate) with two different comonomer compositions and two different aluminium oxide nanoparticles. The nanoparticles were either untreated, or surface-treated with two different silanes, aminopropyl triethoxy silane and octyltriethoxy silane. The best level of dispersion was found for the polymer with 13 wt. % of butyl acrylate (EBA-13) whereas the low melt viscosity of the polymer with 28 wt. % of butyl acrylate (EBA-28) resulted in insufficient mixing with uneven dispersion as a result. Octyltriethoxy silane-treated particles were best dispersed in the polymer. The nanoparticles acted as nucleation agents in EBA-28, increasing the crystallization temperature by several degrees. Studies of the water uptake in the nanocomposite materials showed the effect of the enormous interfacial surfaces and great number of polar groups present on the nanoparticle surfaces. For the well-dispersed nanomaterials, the water sorption data could be modeled by a single Fickian equation, whereas materials that contained a sizeable fraction of large nanoparticle agglomerates showed a two stage sorption process, first a fast process associated with the saturation of the polymer phase and second, a slow diffusion process due to water sorption of large particle agglomerates. The long-term performance and interaction between the nanoparticles and the phenolic antioxidant (Irganox 1010) was investigated by differential scanning calorimetry in order to assess the oxidation induction time (OIT); the latter being proportional to the concentration of efficient antioxidant. It was found that the stabilizer was adsorbed to the untreated Al2O3 nanoparticles, resulting in a significant reduction in OIT. However, silanization of the nanoparticles resulted in an increase in OIT, compared to the materials containing untreated particles. Furthermore, it was shown that the stabilizer was not irreversibly adsorbed to the particles, allowing a gradual release of stabilizer with ageing time. / Polymera nanokompositer är lovande material för användning som dielektriskt material inom högspänningsområdet. I detta arbete studeras nanokompositer framställda av två olika sampolymerer av eten och butylakrylat (EBA-13 med 13 vikt% butylakrylat samt EBA-28 med 28 vikt% och två olika typer av nanopartiklar av Al2O3. Nanopartiklarna användes antingen som obehandlade eller efter silanisering med aminopropyltrietoxysilan- eller oktyltrietoxysilan. Den bästa partikeldispergeringen observerades för de material som baserats på EBA-13 medan den låga smältviskositeten hos EBA-28 resulterade i låga skjuvkrafter under kompounderingen och en observerat ojämn dispergering och förekomst av mikrometerstora agglomerat. Partiklar som silaniserats med oktyltrietoxysilan var lättast att dispergera. Nanopartiklarna fungerade som kärnbildare i EBA-28 vilket medförde en höjning av kristallisationstemperaturen. Vattensorptionsstudier demonstrerade dels effekten av den stora specifika gränsytan mellan partikel och matris och dels av förekomst av polära grupper lokaliserade till nämnda gränsyta. Kompositer med väldispergerade partiklar uppvisade en enkel Ficksk sorptionsprocess medan de material som innehöll en betydande mängd stora agglomerat påvisade en tvådelad process. Den första processen var kopplad till mättningen av polymermatrisen och den andra kunde länkas till vattenupptaget i de stora agglomeraten. Vidare undersöktes långtidsegenskaperna hos nanokompositerna, samt om det fanns någon växelverkan mellan nanopartiklar och en fenolbaserade antioxidant (Irganox 1010). DSC användes för att bestämma induktionstiden för oxidation (OIT) vilket är ett mått på koncentrationen av aktiv fenolisk antioxidant. Det framgick det att Irganox 1010 adsorberades på nanopartiklarna, vilket ledde till en minskning av OIT. Det framgick även att de material som innehöll silaniserade nanopartiklar hade högre OIT jämfört material med obehandlade partiklar. Antioxidanten var däremot inte irreversibelt bunden till nanopartiklarna, utan frigjordes från deras ytor och blev aktiv under åldringen. / QC 20110128

In this work dielectric properties of the poly(ethylene-co-butyl acrylate)filled with alumina nanoparticles are evaluated. These nanocomposite materialswere manufactured at the department of Fibre and Polymer Technology,KTH.This study is limited to the properties of general importance for the AC applications.The dielectric permittivity of the nanocomposite materials wasstudied as a function of filler size, filler content, coating, temperature and airhumidity used for conditioning of the samples. The ultimate goal with thisproject is to describe the influence of material composition, temperature andair humidity on the dielectric properties and model these dependencies.In this thesis the experimental setup for voltage endurance testing of thenanocomposites, namely studying applied voltage frequency dependence ofpartial discharges in electrical trees, with a possibility of following electricaltreeing optically, was developed and described.The dielectric spectroscopy measurements were performed on thoroughly driednanocomposites - so-called dry DS study. It was shown that the experimentaldata can be fitted with Havriliak-Negami approximation, which justifiesthe correctness of the measurement results. It has been shown that addingnanoparticles to the EBA matrix changes the low frequency dispersion significantlyfor the dried samples. It was also indicated that the particle coatingused has very low impact on the resulting permittivity of the thoroughly driedsamples. From the dry DS studies it was suggested that the main cause ofthe scattering in data between the dry samples is most likely the influenceof the material inhomogeneity and possibly the moisture absorption. Thisleads to a possibility of using dielectric spectroscopy as a tool for probing thedispersion of nanoparticles in the polymer matrix.The dielectric spectroscopy measurements were also carried out on the nanocompositesconditioned in the environments with different humidity levels of air inorder to study the influence of absorbed water on the dielectric permittivity- so-called wet DS study. From the wet study it was shown that for the wetsamples the amplitude of the loss peak is defined by the filler size, filler contentand coating used; while its position in frequency domain is determinedby the coating and the humidity level used for conditioning. / QC 20110315

Se sintetizaron nanocompuestos híbridos en bloque de poli(etil metacrilato-co-hidroxietil acrilato) 70/30 wt%/sílice, P(EMA-co-HEA)/SiO2, con distintas proporciones de sílice hasta el 30 wt%. El procedimiento de síntesis consistió en la copolimerización de los monómeros orgánicos durante la polimerización sol-gel simultánea de tetraetoxisilano, TEOS como precursor de sílice. El TEOS se hidroliza eficientemente y condensa dando lugar a sílice, y presenta una distribución homogénea en forma de agregados inconexos de nanopartículas de sílice elementales en los híbridos con bajos contenidos de sílice (<10 wt%) o redes continuas interpenetradas con la red orgánica tras la coalescencia de los agregados de sílice (>10 wt%). La red polimérica orgánica se forma en los poros producidos en el interior de las nanopartículas elementales de sílice, y también en los poros formados entre los agregados de nanopartículas. Los nanohíbridos con contenidos de sílice intermedios (10-20 wt%) exhibieron las propiedades más equilibradas e interesantes: i) refuerzo mecánico de la matriz orgánica conseguida gracias a redes de sílice continuas e interpenetradas, ii) buena capacidad de hinchado debida a la expansión de la red orgánica no impedida todavía por un esqueleto de sílice rígido, y a un número alto de grupos silanol terminales hidrófilos (concentraciones inorgánicas en los alrededores de la coalescencia), y iii) mayor reactividad superficial debido a un contenido relativo bastante elevado de grupos polares silanol terminales disponibles en las superficies. La 'bioactividad' o capacidad de los materiales en bloque de formar hidroxiapatita (HAp) sobre sus superficies fue estudiada in vitro sumergiéndolos en fluido biológico simulado (simulated body fluid, SBF). La formación de la capa de HAp viene controlada por el mecanismo y el tiempo de inducción a la nucleación de la misma, que dependen a su vez de la estructura de la sílice. / Vallés Lluch, A. (2008). P(EMA-co-HEA)/SiO2 hybrid nanocomposites for guided dentin tissue regeneration: structure, characterization and bioactivity [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/3795

De nouveaux glycopolymères greffés aux paramètres macromoléculaires contrôlés [dextrane-g-poly(acrylate de diéthylène glycol cholestéryle), Dex-g-PADEGChol] ont été préparés en quatre étapes via la stratégie de synthèse « grafting from». L'originalité de ces glycopolymères réside dans la combinaison, et pour la première fois, d'une dorsale polysaccharide hydrophile biocompatible/ biodégradable et de greffons polymères hydrophobes à caractère mésogène. L'ATRP a été utilisée pour contrôler la croissance des greffons PADEGChol en milieu homogène à partir d'un macroamorceur dérivé de dextrane (DexAcBr). Les conditions de polymérisation avaient été préalablement ajustées en étudiant l'homopolymérisation du monomère ADEGChol en présence d'un amorceur modèle et de plusieurs systèmes catalytiques CuIBr/(PMDETA ou OPMI) dans différents solvants (THF ou toluène). Le caractère amphiphile de ces glycopolymères a été évalué et leurs propriétés mésomorphes ont été étudiées par calorimétrie différentielle à balayage, microscopie optique à lumière polarisante et par diffraction des rayons X. Des études préliminaires par microscope électronique à transmission et diffusion dynamique de la lumière polarisée ont démontré que ces glycopolymères adoptent une morphologie vésiculaire appelée « polymersome » en phase aqueuse, lorsque le DMSO est utilisé comme co-solvant. Ces nano-objets pourront être testés ultérieurement pour la formulation d'un nouveau type de vecteurs de principes actifs / New graft glycopolymers with well-defined parameters [dextran-g-poly(diethylene glycol cholesteryl ether acrylate) (Dex-g-PADEGChol)] have been prepared in four steps using the "grafting from" strategy. Challenge of this work arises from the combination for the first time of a hydrophilic, biocompatible/biodegradable polysaccharide backbone with mesogen hydrophobic polymeric grafts. Controlled growth of the grafts (PADEGChol) was obtained using ATRP initiated in homogeneous medium from a dextran derivative (DexAcBr). In order to find the best polymerization conditions, homopolymerization of ADEGChol monomer was investigated using an initiator model and various catalytic systems CuIBr/(PMDETA or OPMI) in two solvents (Toluene and THF). The amphiphilic properties of such glycopolymers were evaluated and their mesomorphic properties have been studied by thermal polarizing optical microscopy, differential scanning calorimetry and X-ray scattering. Using transmission electron microscopy and dynamic light scattering, vesicular morphology called "polymersome" was observed in aqueous medium when DMSO was used as co-solvent. These polymersomes could be tested as new drug delivery systems

Esta tese envolveu o estudo da dinâmica molecular em copolímeros em bloco compostos de poli(metacrilato de metila) (PMMA), poli(ácido acrílico) (PAA) e Poli(acrilato de chumbo) (PAPb) por técnicas de Ressonância Magnética Nuclear e de análise térmica (DSC e DMTA). Estes copolímeros em bloco foram sintetizados visando a obtenção de compostos para serem utilizados, tanto como lentes oftálmicas com maiores índices de refração, como materiais dedicados à proteção radiológica, sendo estas duas propriedades de emprego individual ou integrado. Para o estudo destes materiais, as amostras foram confeccionadas com várias composições, incluindo aquelas nas formas puras contendo apenas um bloco, resultantes da combinação de dois blocos, e as triblocos, com diferentes quantidades relativas de PAPb, variando de 1 a 40%. Para o caso do PMMA, a dinâmica molecular é bem conhecida, sendo caracterizada por uma relaxação &beta;, que envolve mais especificamente movimentos de seus ramos laterais e que ocorre dentro de um amplo intervalo de temperatura centrado em torno da ambiente, e pela transição vítrea, que envolve, predominantemente, movimentos da cadeia principal que ocorrem para temperaturas em torno de 100oC. Devido à extensão destes dois eventos em grandes intervalos de temperatura, eles acabam se superpondo já em temperaturas abaixo de 100oC. O fato da relaxação &beta; ocorrer para o PMMA em torno da temperatura ambiente, confere-lhe uma de suas características mais importantes, não ser quebradiço. Porém, devido à presença do grupo hidroxila no PAA, que permite a ocorrência de ligações de hidrogênio entre os diferentes ramos laterais, a relaxação &beta; é suprimida neste material, tornando-o quebradiço e não adequado para as aplicações desejadas. No caso do copolímero tribloco, espera-se que o PAPb também possa interferir na característica mecânica final do material, em função de sua participação na dinâmica molecular do copolímero. Para este estudo foram preparadas várias amostras com diferentes quantidades relativas de PMMA, PAA e PAPb, de modo entendermos a dinâmica molecular destes materiais, individual e coletivamente, afim de selecionar os mais indicados para as aplicações tecnológicas almejadas. Para o estudo destas amostras, utilizamos tanto técnicas de análise térmica (DSC e DMTA), que fornecem, de forma relativamente rápida, dados importantes sobre a dinâmica macroscópica, quanto métodos básicos e avançados de RMN no estado sólido, que propiciam informações mais detalhadas sobre a dinâmica molecular. Estes estudos indicaram que a presença do PAA, obrigatória na rota de síntese utilizada para a inserção do PAPb, é um elemento indesejável no produto final, pois ele sempre atua na supressão da relaxação &beta;. Adicionalmente, os dados obtidos indicaram que o PAPb, em grandes quantidades, também age na supressão desta relaxação. Embora a proposição destes novos materiais para a área oftálmica não ser muito adequada, já que a quantidade de PAPb necessária para a obtenção de amostras com bons índices de refração deve ser grande (bem acima de 5%, quando elas tornam-se quebradiças), as amostras com pequenos conteúdos de PAPb (até 5%) permitiram uma redução de até 50% dos raios-x incidentes. Finalmente, os estudos realizados por técnicas que observam detalhes da dinâmica molecular, tanto em níveis macroscópicos (DSC e DMTA), quanto moleculares (RMN), ofereceram excelentes informações básicas tanto sobre a mobilidade dos diferentes ramos que compõem os copolímeros em bloco, quanto a interação/miscibilidade entre os diferentes blocos, que afeta também a dinâmica global do sistema. / This thesis involved the study of molecular dynamics in triblock copolymers consisting of poly (methyl methacrylate) (PMMA), poly (acrylic acid) (PAA) and Poly (lead acrylate) (PAPb) by solid-state Nuclear Magnetic Resonance (NMR) and thermal analyses (DSC and DMTA). These block copolymers were synthesized in order to obtain materials not only presenting higher refractive index but also offering good radiological protection, which are useful for individual and combined applications. For the study of these materials, the samples were prepared with various compositions, including those in pure form containing only a block, resulting from the combination of two blocks, and the triblock with different relative amounts of PAPb, ranging from 1 to 40%. In the case of PMMA, the molecular dynamics is well known, characterized by a &beta; relaxation, which involves more specifically the ester side-group dynamics occurring within a broad temperature range centered around the room temperature, and the glass transition, predominantly involving the main chain dynamics that occur for temperatures around 100oC. Due to large extension of these two dynamical events in wide temperature ranges, they merge at temperatures below 100oC. The fact that the &beta; relaxation occurs for the PMMA around the room temperature, confers to it one of its most important features, toughness. However, due to the presence of the hydroxyl group in PAA, which allows the occurrence of hydrogen links between different branches, the &beta; relaxation in this material is strongly suppressed, making it brittle and not suitable for the desired applications. In the case of the triblock copolymer, it is also expected that PAPb may also interfere with the mechanical properties of the final material due to its involvement in the full molecular dynamics of the copolymer. For this study, several samples were prepared with different relative amounts of PMMA, PAA and PAPb, in order to understand the molecular dynamics of these materials, individually and collectively, and select the most suitable ones for the desired technological applications. To characterize and study these samples, we employed thermal analyses (DSC and DMTA), which give quick and important data on the macroscopic dynamics, and basic and advanced solid-state NMR methods, which provide more detailed information about he molecular dynamics. These studies indicated that PAA, necessary along the synthesis route used for the insertion of PAPb in the triblock copolymers, is an undesirable element in the final product, because it is always acting on the suppression of &beta; relaxation. Although the proposition of these new materials for the ophthalmic area is not very appropriate, since the amount of PAPb necessary to obtain good refraction indexes would be necessarily large (over 5%, when they become brittle), the samples with small amounts of PAPb (up to 5%, when they present good mechanical properties) allowed a significant reduction of about 50% of the incident x-rays. Finally, using solid-state NMR methods, including modern Exchange experiments and thermal analyses (DSC and DMTA), it was possible to understand in detail the individual and cooperative motions of the main chain and side groups. The most import result obtained indicate that, despite being important inserting PAPB and PAA in the block copolymer for improving the desired optical and x-ray shielding properties, the presence of these blocks tend to suppress the &beta; relaxation, reducing thesample mechanical properties.

No description available.