No description available.

The growing concern about climate change is pushing the global community towards greener solutions to cut down the greenhouse gases emissions. As such, producing energy from sustainable sources becomes mandatory to achieve the net zero emissions goal by 2050, as set by the United Nations. Solar panels offer the possibility to generate power from light harvesting, but it’s the use of organic materials that offers great advantages in terms of functionality and life-cycle. In particular, organic semiconductors properties such as their tunable colours, lightweight, flexibility, and semi-transparency enable the use of Organic Photovoltaics (OPV) in building façades and contribute to the realisation of Net Zero Energy Buildings (NZEB). However, the OPV scalability to terawatts of installed capacity is still non competitive with respect to its cost when compared to the conventional inorganic silicon-based technologies. One of the reasons is the lower performance achieved by the state-of-the-art OPV devices, whose active layer (the film where the light is absorbed and converted into free charges, electrons and holes, i.e. electricity) is typically composed of a blend made of an electron donor material (conjugated polymer) and a smaller compound as electron acceptor (Non-Fullerene Acceptor, NFA). A crucial factor determining the low performance of OPVs made with NFAs is related to their poor charge transport properties (e.g. low electron mobility and high recombination), which are intimately related to how these molecules are arranged in the solid film, i.e. their molecular organisation. Great progress was made in the field of organic electronics to obtain higher mobility by understanding the crystalline behaviour of organic molecules from their single crystals, and using these knowledge in the design of new compounds with the desired properties. At the beginning of this thesis project, little was known about the solid-state organisation of NFAs as very few single crystal structures were disclosed. For these reasons, we were first dedicated to the study of the intrinsic propensity of NFAs to crystallise by growing single crystals. At this fundamental level, we found that the NFA packing geometry is strongly affecting the isotropy of the charge transport, and potentially the electron mobility. On a following step, we developed a methodology to track the NFA packing geometry as we move from ideal systems (single crystals) to the most complex scenario of the solar cell active layer films, which include a donor and an acceptor (NFA) component. We discovered that NFAs generally tracks their packing motif from single crystals to blend films, and we quantified the benefit of using crystalline compounds with specific packing geometry in terms of electron mobility. Interestingly, we also found that these motifs are not necessary to obtain high performance in organic solar cells as the efficiency is mostly driven by charge recombination and domain purity, rather than electron mobility.

Conducting and semiconducting polymers, consisting of delocalized π-electrons, have been studied for the past three decades. These materials have shown novel physical properties with interesting applications in batteries, detectors, light emitting diodes, field effect transistors, solar cells, biosensors etc. Nevertheless the charge transport properties are yet to be understood in detail due to the complexity of the system, especially due to the interplay of quasi-one dimensionality (q-1D), disorder, localization and electron-electron interactions(EEI). A combined investigation of both conductivity and spin lattice relaxation time, especially at very low temperatures and high magnetic fields, is really lacking in conducting polymers. In this thesis a set of experiments – dc conductivity, magnetoresistance (MR), Nuclear Magnetic Resonance (NMR) spin lattice relaxation time (T1) measurements, magnetic susceptibility amd ac conductivity have been carried out in conducting polymers. NMR being a local probe it is possible to get the nanoscopic scale charge transport mechanism. Further, this helps to develop a consistent understanding among a wide range of the physical properties in conducting polymers. In this thesis author has reported the results of experiments at ultra low temperature (mk) and ultra high magnetic field which give more insight about the roles of electron-electron interaction(EEI) and disorderin charge transport properties. This thesis describes a detailed study of charge transport and NMR relaxation in three representative conducting polymers namely polypyrrole(PPy)., poly-3-methylthiophene(P3MT) and poly3-hexylthiophene(P3HT). The emphasis is to understand the charge transport phenomena and NMR relaxation, especially at ultra low temperatures (down to 20 mk) and high magnetic field (up to 23.4 T). The NMR T1 relaxation mechanisms are discussed in terms of (i) Korringa relaxation, (ii) relaxation due to spin diffusion to paramagnetic centers (SDPC) amd (iii) reorientation of symmetric groups, depending upon the temperature range.

The present thesis is focused on the rational design of Diketopyrrolopyrrole based π- conjugated polymers for organic electronics. The thesis is organized into six different chapters and a brief description of the individual chapters is provided below. Chapter 1 briefly describes the physics governing the electronic processes occurring in organic photovoltaics (OPVs) and organic field-effect transistors (OFETs) followed by design rules for the synthesis of conjugated polymers for organic electronics. Diketopyrrolopyrrole (DPP) based π-conjugated materials and their development in OPVs and OFETs have been highlighted. Chapter 2 discusses the synthesis and characterization of a series of small molecules of DPP derivatives attached with different alkyl chains. Influence of side chains on the photophysical properties of these DPP derivatives have been studied by UV-visible spectroscopy and DFT calculations. Crystal structure studies revealed the effect of alkyl chains on the torsional angle, crystal packing, and intermolecular interactions such as π-π stacking. Chapter 3 reports the synthesis of novel diketopyrrolopyrrole-diketopyrrolopyrrole (DPPDPP) based conjugated copolymers and their application in high mobility organic field-effect transistors. Effect of insulating alkyl chains on polymer thin film morphology, lamellar packing and π-π stacking interactions have been studied in detail. Investigation of OFET performance of these DPP-DPP copolymers with branched alkyl chains (N-CS2DPP-ODEH) resulted in low charge carrier mobilities as compared to the polymers (N-CS2DPP-ODHE) with linear alkyl chains. Polymer with triethylene glycol side chains (N-CS2DPP-ODTEG) exhibited a high field-effect electron mobility value of ~3 cm2V-1s-1 with a very low threshold voltage of ~2 V. Chapter 4 investigates the effect of torsional angle on the intermolecular interactions and charge transport properties of diketopyrrolopyrrole (DPP) based polymers (PPDPP-OD-HE and PPDPP-OD-TEG). Grazing incidence x-ray diffraction studies shows the different orientation of the polymer crystallites and lamellar packing involved in polymer thin films. Investigation of OFETs evidenced the effect of torsional angle on the charge transport properties where the polymer with higher torsional angle PPDPP-OD-TEG resulted in high threshold voltage with less charge carrier mobility compared to the polymer with lower torsional angle (N-CS2DPP-OD-TEG). Chapter 5 investigates the effect of photoactive material morphology on the solar cell device performance, and charge transfer kinetics by adding high boiling point processing additives. DPP based donor-acceptor (D-A) type low band gap polymers (PTDPPQ and PPDPPQ) have been synthesized and employed in bulk-heterojunction (BHJ) solar cells with the acceptor PC71BM. Addition of processing additive 1,8-diiodooctane (DIO) resulted in three order improvements in power conversion efficiency (PCE). Chapter 6 describes the design and synthesis of two diketopyrrolopyrrole based copolymers (PPDPP-BBT and PTDPP-BBT) for their application in organic devices such as field-effect transistors and bulk-heterojunction solar cells. Investigation of OFET performance of these DPP based copolymers displayed hole mobilities in the order of 10-3 cm2V-1s-1. The semiconductor-dielectric interface has been characterized by capacitance-voltage, and Raman scattering methods. In summary, the work presented in this thesis describes the synthesis and characterization of diketopyrrolopyrrole based new polymeric semiconductors. Effects of insulating side chains and torsional angle on the charge transport properties of these polymers in OFETs have been investigated. This work also describes the effect of solvent additives on the active layer morphology and BHJ solar cell device performance. The results described here show that these materials have potential application as active components in plastic electronics.

In dieser Arbeit werden die lokalen elektronischen Eigenschaften sowie der Ladungstransport bis auf atomare Längenskalen von epitaktischem Graphen auf der SiC(0001)-Oberfläche charakterisiert. Dazu wird neben den etablierten Rastersondenverfahren erstmals bei 6 K und unter UHV-Bedingungen die Methode der Rastertunnelpotentiometrie (STP) eingesetzt.  Hierzu wurden epitaktisch gewachsene Graphenproben auf der 6H-Si(0001)-Oberfläche unter UHV-Bedingungen durch resistives Heizen präpariert und anschließend elektrisch kontaktiert. Mit Hilfe des Rasterkraftmikroskopie und niederenergetischen Elektronenbeugung wird die Morphologie der Proben untersucht. Es können heterogene Proben mit einer Bedeckung von einlagigem und zweilagigem Graphen präpariert werden, die eine direkte vergleichende Untersuchung mit dem Rastertunnelmikroskop ermöglichen. Ergänzend wird zur Bestimmung der Lagenanzahl der gebildeten Graphenschichten die Differenz des Oberflächenpotentials von ein- und zweilagigem Graphen an Atmosphäre durch die Raster-Kelvin-Mikroskopie (KPFM) ermittelt.  Für Transportexperimente und zukünftige Anwendungen spielt der Kontaktwiderstand zwischen epitaktisch gewachsenem Graphen und den kontaktierenden Elektroden eine entscheidende Rolle. Es wird erstmals demonstriert, wie durch räumlich aufgelöste Messungen mit Hilfe der Raster-Kelvin-Mikroskopie am Gold-Graphen-Interface auf semi-isolierendem SiC(0001) eine obere Grenze des Kontaktwiderstandes von ρ_c=1×10^(-6) Ωcm² abgeschätzt werden kann.  Die Untersuchung der epitaktisch gewachsenen Graphenproben mit der Methode der Rastertunnelmikroskopie (STM) ermöglichen die eindeutige Identifizierung von ein- und zweilagigem Graphen und deren hexagonale atomare Struktur, die über mehrere 100 nm² keine Punktdefekte zeigen. Die unter der Graphenschicht liegende Zwischenschicht zeigt eine stark ungeordnete quasiperiodische Struktur mit zahlreichen Trimeren, die ebenso bei einer Bedeckung der Zwischenschicht mit ein- und zweilagigem Graphen abgebildet werden können. Einlagiges Graphen ist auf atomaren Längenskalen elektronisch stark inhomogen. Es können im Energiebereich von E_F±100 mV zahlreiche lokalisierte, räumlich variierende Zustände identifiziert werden, die selbst bei der Fermienergie auf Längenskalen von 5 nm² zu Variationen in der Zustandsdichte führen. Auf zweilagigem Graphen fallen Variationen in der lokalen Zustandsdichte geringer aus.  Um den für den elektronischen Transport relevanten Energiebereich bei E_F zu spektroskopieren, wird die Thermospannung im Tunnelkontakt ausgenutzt, welche sich mit der STP-Methode bestimmen lässt. Diese liefert neue Einblicke in die elektronische Struktur der Graphenoberfläche bei E_F. Die räumliche Variation der Thermospannung bei abgeschätzten Temperaturdifferenzen von einigen 10 bis 100 K zwischen Spitze und Probe liegt bei einigen 10 bis 100 µV sowohl auf atomarer Skala als auch zwischen ein- und zweilagigem Graphen und ist sehr empfindlich auf die atomaren Eigenschaften der eingesetzten STM-Spitze. Die hohe laterale und energetische Auflösung des Verfahrens ermöglicht die Analyse von Streuprozessen wie der Intra- und Intervalley-Streuung und zeigt im Gegensatz zu bisherigen Annahmen, dass auch noch zweilagiges Graphen elektronisch von der Zwischenschicht beeinflusst wird.  Die starke elektronische Inhomogenität der Proben bei der Fermienergie spiegelt sich auch in den Transportexperimenten mit dem STP-Verfahren wider. Es zeigen sich signifikante Spannungsabfälle auf ein- und zweilagigen Graphenflächen und an lokalisierten Defekten wie Übergängen zwischen einlagigen Graphenflächen und Übergängen zwischen ein- und zweilagigen Graphenflächen. Der Potentialverlauf kann gut durch ein klassisches ohmsches Transportmodell mit spezifischen Widerständen beschrieben werden. Die quantitative Analyse liefert spezifische Widerstände der einzelnen Defekte, die in der Größenordnung bisheriger Transportuntersuchungen liegen. Dabei zeigt sich, dass ein- und zweilagiges epitaktisches Graphen nahezu identische Mobilitäten von ~1000 cm²/Vs bzw. mittlere freie Weglängen von ~40 nm bei 6 K aufweisen. Diese Werte liegen weit unter den theoretisch erwarteten einer defektfreien Graphenoberfläche. Im Zuge der Transportmessungen wird ebenso der Einfluss der Thermospannung im Tunnelkontakt untersucht. Für Ladungstransportmessungen stellt sie einen zunächst unerwünschten Nebeneffekt dar, da die Variationen in der Thermospannung in derselben Größenordnung wie die Variationen im lokalen elektrochemischen Potential im Fall der durchgeführten Transportexperimente sind. Dies kann zu Fehlinterpretationen bei der Bestimmung von Spannungsabfällen führen. Jedoch wird im Rahmen der experimentellen Auflösung gezeigt, dass sich die Thermospannung rein additiv verhält und für Messungen des lokalen elektrochemischen Potentials mit entgegensetzten Stromrichtungen eliminieren lässt.  Des Weiteren wird der Verlauf des elektrochemischen Potentials in der unmittelbaren Umgebung von Übergängen zwischen ein- und zweilagigem sowie einlagigem Graphen untersucht. Die Spannungsabfälle sind auf einen Bereich kleiner λ_F/2 lokalisiert. Im Bezug auf den topographischen Verlauf zeigt sich für den Spannungsabfall am Übergang zwischen ein- und zweilagigem Graphen ein lateraler Versatz hin zum zweilagigen Graphen. Als Ursache wird ein kombinierter Streumechanismus aus einer lokalen Änderung der Dotierung und Fehlanpassung der Wellenfunktionen am Übergang zwischen ein- und zweilagigem Graphen vorgeschlagen.

Electrolytic solutions contain mobile ions that can pass current, and are essential components of any solution-phase electrochemical system. The Nernst–Planck–Poisson equations describe the electrodynamics and transport dynamics of electrolytic solutions. This thesis applies modern numerical and mathematical techniques in order to solve these equations, and hence determine the behaviour of electrochemical systems involving charge transport. The following systems are studied: a liquid junction where a concentration gradient causes charge transport; an ideally polarisable electrode where an applied potential difference causes charge transport; and an electrochemical cell where electrolysis causes charge transport. The nanometre Debye length and nanosecond Debye time scales are shown to control charge separation in electrolytic solutions. At equilibrium, charge separation is confined to within a Debye length scale of a charged electrode surface. Non-equilibrium charge separation is compensated in solution on a Debye time scale following a perturbation, whereafter electroneutrality dictates charge transport. The mechanism for the recovery of electroneutrality involves both migration and diffusion, and is non-linear for larger electrical potentials. Charge separation is an extremely important consideration on length scales comparable to the Debye length. The predicted features of capacitive charging and electrolysis at nanoelectrodes are shown to differ qualitatively from the behaviour of larger electrodes. Nanoscale charge separation can influence the behaviour of a larger system if it limits the overall rate of mass transport or electron transfer. This thesis advocates the use of numerical methods to solve the Nernst–Planck–Poisson equations, in order to avoid the simplifying approximations required by traditional analytical methods. As this thesis demonstrates, this methodology can reveal the behaviour of increasingly elaborate electrochemical systems, while illustrating the self-consistency and generality of fundamental theories concerning charge transport.

La conception de cellules solaires organiques de type hétérojonction en volume a été proposée pour la première fois en 1990. Ces dispositifs sont composés d’un mélange de polymères conjugués, donneurs d’électrons, et de fullerènes, accepteur d’électrons, et ont pour la première fois permis d’atteindre un rendement de conversion énergétique significatif (de l’ordre de 2%) avec des semi-conducteurs organiques. Dans ce contexte, cette thèse a porté sur l'étude approfondie d’une série de molécules donneurs d’électrons de forme d’haltère, dont le groupement planaire est l’unité triazatruxène (TAT) et le cœur déficient en électrons le thienopyrroledione (TPD). Les molécules de cette série se différencient par la nature des chaînes alkyles, attachées à l’unité centrale et aux unités TAT. Plus précisément, la relation entre la nature des chaînes latérales et les propriétés moléculaires et thermiques de ces molécules en forme d’haltère ont été étudiées en détail. L'impact des chaînes alkyles sur la morphologie en film mince à l’échelle nanométrique a également été étudié. Afin de mieux comprendre l’influence de la microstructure des films minces (constitués soit uniquement des molécules donneuses soit de mélanges molécules/fullerènes), le transport de charge dans le plan du film et perpendiculairement au plan ont été mesurées en fonction de la phase (amorphe, cristalline, …) du matériau. Des cellules solaires BHJ en mélange avec le dérivé de fullerène ont également été réalisées. / The prospective conception of electron-donor/electron-acceptor (D/A) bulk heterojunction solar cells was first reported in 1990s, which blended the semiconducting polymer with fullerene derivatives, enhancing the power conversion efficiency. Since then, interests on this domain has been increasing continuously, and the efficiencies of BHJ solar cells have been increased dramatically. In this context, this thesis focuses on the study of a series of dumbbell-shaped small molecule donors, based on a highly planar unit called triazatruxene. The only difference between those molecules is the side-chains attached to central units and TAT units. As a consequence, the relationship between side chains nature and optoelectronic and structural properties of our TAT-based dumbbell-shaped molecular architecture will be investigated in detail. The impact of the alkyl chains on the molecular and thin film properties was also studied, with a particular emphasis put on microstructure and charge transport aspects. In-plane and out-of-plane charge carrier transport, with pure molecules and blend with fullerene, are measured in different systems. BHJ solar cells in blend with fullerene derivatives were also realized.

Cette thèse traite de l'étude du transport de charge à travers les semi-conducteurs organiques au sein de transistors à effet de champ organiques (OFET). Une grande attention a été accordée aux interfaces dans les OFET dont les propriétés ont été accordées pour moduler la réponse transistor. La stabilité de l'appareil en état de commutation et le mécanisme régissant l'injection de charges ont été étudiés systématiquement. Le transport de charge au niveau fondamental à travers les monocouches auto-assemblées comprenant une grande variété des molécules π-conjuguées a été étudié. Dans cette thèse, le processus de transport de charge et différents paramètres affectant ce phénomène sont examinées en détail par la fabrication et la caractérisation de trois terminaux basés sur des architectures OFET et deux dispositifs de jonctions terminales constituées d’une couche mono-moléculaire sur la surface de l'électrode métallique. Parmi les différents aspects relatifs à l'injection de charge dans des transistors organiques macroscopiques à couches minces, un accent particulier a été mis sur l'interface de l’engineering en réglant (i) le diélectrique / l’interface semi-conducteur, et (ii) l'électrode en métal / le semi-conducteur. Pour explorer les aspects régissant le transport de charge dans le canal de l'appareil, nous avons étudié la propriété de (iii) la mobilité intrinsèque dans la semi-conductivité des matériaux et (iv) l'utilisation de mélanges dans la couche active du dispositif. A l’échelle nanométrique, le transport de charge, grâce à une mono-couche moléculaire chimisorbé sur des électrodes métalliques, a été étudié. Pour effectuer la caractérisation électrique sur la mono couche auto-assemblée (SAM), nous avons construit un système de configuration comprenant des alliages eutectiques de gallium et d'indium liquide métallique (GainE) comme électrode. / This thesis deals with the study of charge transport through organic semiconductors incorporated in Organic Field-Effect Transistors (OFETs). Great attention is given to the interfaces in the OFETs and the properties of which were tuned to modulate transistor response. The stability of the device under switching states and the mechanism governing charge injection were studied systematically. In a fundamental level the charge transport through self-assembled monolayers comprising of variety of π-conjugated molecules were investigated. In this thesis the charge transport process and different parameters affecting this phenomenon are investigated in detail by fabrication and characterization of three terminal devices based on OFET architectures and two terminal devices consisting junctions incorporating mono-molecular layer on surface of metal electrode. Among the different aspects governing the charge injection in macroscopic organic thin film transistors particular emphasis was given to the interface engineering by tuning the (i) Dielectric/semiconductor interface, and (ii) Metal electrode/semiconductor. To explore aspects governing charge transport within the channel of the device we investigated the property of (iii) semiconductor intrinsic mobility and (iv) usage of blends in the active layer of the transistor. On the nanoscale the charge transport through a mono molecular layer chemisorbed onto metal electrodes was investigated. To perform electrical characterization on self-assembled monolayer (SAM) a custom in-house setup comprising of eutectic alloy of liquid metallic gallium indium (GaInE) probe electrode was built.

This thesis concerns the development and characterisation of X-ray imaging systems based on single photon processing. “Colour” X-ray imaging opens up new perspectives within the fields of medical X-ray diagnosis and also in industrial X-ray quality control. The difference in absorption for different “colours” can be used to discern materials in the object. For instance, this information might be used to identify diseases such as brittle-bone disease. The “colour” of the X-rays can be identified if the detector system can process each X-ray photon individually. Such a detector system is called a “single photon processing” system or, less precise, a “photon counting system”. With modern technology it is possible to construct photon counting detector systems that can resolve details to a level of approximately 50 µm. However with such small pixels a problem will occur. In a semiconductor detector each absorbed X-ray photon creates a cloud of charge which contributes to the image. For high photon energies the size of the charge cloud is comparable to 50 µm and might be distributed between several pixels in the image. Charge sharing is a key problem since, not only is the resolution degenerated, but it also destroys the “colour” information in the image. This thesis presents characterisation and simulations to provide a detailed understanding of the physical processes concerning charge sharing in detectors from the MEDIPIX collaboration. Charge summing schemes utilising pixel to pixel communications are proposed. Charge sharing can also be suppressed by introducing 3D-detector structures. In the next generation of the MEDIPIX system, Medipix3, charge summing will be implemented. This system, equipped with a 3D-silicon detector, or a thin planar high-Z detector of good quality, has the potential to become a commercial product for medical imaging. This would be beneficial to the public health within the entire European Union. / Denna avhandling berör utveckling och karaktärisering av fotonräknande röntgensystem. ”Färgröntgen” öppnar nya perspektiv för medicinsk röntgendiagnostik och även för materialröntgen inom industrin. Skillnaden i absorption av olika ”färger” kan användas för att särskilja olika material i ett objekt. Färginformationen kan till exempel användas i sjukvården för att identifiera benskörhet. Färgen på röntgenfotonen kan identifieras om detektorsystemet kan detektera varje foton individuellt. Sådana detektorsystem kallas ”fotonräknande” system. Med modern teknik är det möjligt att konstruera fotonräknande detektorsystem som kan urskilja detaljer ner till en upplösning på circa 50 µm. Med så små pixlar kommer ett problem att uppstå. I en halvledardetektor ger varje absorberad foton upphov till ett laddningsmoln som bidrar till den erhållna bilden. För höga fotonenergier är storleken på laddningsmolnet jämförbar med 50 µm och molnet kan därför fördelas över flera pixlar i bilden. Laddningsdelning är ett centralt problem delvis på grund av att bildens upplösning försämras, men framför allt för att färginformationen i bilden förstörs. Denna avhandling presenterar karaktärisering och simulering för att ge en mer detaljerad förståelse för fysikaliska processer som bidrar till laddningsdelning i detektorer från MEDIPIX-projekter. Designstrategier för summering av laddning genom kommunikation från pixel till pixel föreslås. Laddningsdelning kan också begränsas genom att introducera detektorkonstruktioner i 3D-struktur. I nästa generation av MEDIPIX-systemet, Medipix3, kommer summering av laddning att vara implementerat. Detta system, utrustat med en 3D-detektor i kisel, eller en tunn plan detektor av högabsorberande material med god kvalitet, har potentialen att kunna kommersialiseras för medicinska röntgensystem. Detta skulle bidra till bättre folkhälsa inom hela Europeiska Unionen.

Organic molecules such as porphyrins and alkanethiols are currently being investigated for applications such as sensors, light-emitting diodes and single electron transistors. Porphyrins are stable, highly conjugated compounds and the choice of metal ion and substituents bound to the macrocycle as well as other effects such as chemical surrounding and cluster size modulate the electronic and photonic properties of the molecule. Porphyrins and their derivatives are relatively non-toxic and their very rich photo- and electro-chemistry, and small HOMO-LUMO gaps make them outstanding candidates for use in molecularly-enhanced electronic applications. For these studies, self-assembled tri-pyridyl porphyrin thiol derivatives have been fully characterized on Au(111) surfaces. A variety of surface characterization techniques such as Atomic Force Microscopy (AFM), Scanning Tunneling Microscopy (STM), FT-IR spectroscopy and X-ray photoelectron spectroscopy (XPS) have been implemented in order to obtain information regarding the attachment orientation based on the angle and physical height of the molecule, conductivity which is determined based on the apparent height and current-voltage (I-V) measurements of the molecule, conductance switching behavior due to conformational or other effects as well as the stability of the molecular ensembles. Specifically, the transport properties of free base and zinc coordinated tri-pyridyl porphyrin thiol molecular islands inserted into a dodecanethiol matrix on Au(111) were investigated using STM and cross-wire inelastic electron tunneling spectroscopy (IETS). The zinc porphyrin thiol islands observed by STM exhibited reversible bias induced switching at high surface coverage due to the formation of Coulomb islands of ca. 10 nm diameter driven by porphyrin aggregation. Low temperature measurements (~ 4 K) from crossed-wire junctions verified the appearance of a Coulomb staircase and blockade which was not observed for single molecules of this compound or for the analogous free base. Scanning probe lithography via nanografting has been implemented to directly assemble nanoscale patterns of zinc porphyrin thiols and 16-mercapotohexadecanoic acid on Au surfaces. Matrix effects during nanopatterning including solvent and background SAMs have been investigated and ultimately ~ 10 nm islands of zinc porphyrins have been fabricated which is the optimal size for the observed switching effect.