Vários estudos mostram que na doença renal policística autossômica dominante os cistos surgem a partir de um mecanismo de "dois-golpes". A patogênese das manifestações não-císticas, contudo, é pouco compreendida. Neste estudo usamos uma linhagem de camundongos endogâmica com uma mutação nula em Pkd1, onde animais heterozigotos apresentam formação cística renal mínima até 40 semanas de idade. O clearance de inulina e o número de glomérulos foram menores em machos Pkd1+/- que Pkd1+/+, enquanto o volume glomerular médio foi maior em heterozigotos. A excreção urinária de NO2/NO3 não diferiu significantemente entre os dois grupos. Avaliamos a osmolalidade urinária máxima em machos e fêmeas Pkd1+/- and Pkd1+/+, porém não foi detectada diferença significante entre os grupos heterozigoto e selvagem. Nossos resultados oferecem evidência direta de que a haploinsuficiência de Pkd1 resulta em anormalidades anatômicas e funcionais renais e sugerem que o estado haploinsuficiente de Pkd1 possa resultar na redução do número de néfrons por diminuir a ramificação tubular renal durante a nefrogênese / Several studies show that in autosomal dominant polycystic kidney disease cysts arise through a "two-hit" mechanism. The pathogenesis of non-cystic features, however, is poorly understood. In this study we used an inbred mouse line with a null mutation of Pkd1, where heterozygotes had minimal renal cyst formation up to 40 weeks of age. Inulin clearance and the number of glomeruli were lower in Pkd1+/- than in Pkd1+/+ males, while a higher average glomerular volume was observed in heterozygotes. The urinary excretion of NO2/NO3 did not significantly differ between the two groups. Maximal urinary osmolality was evaluated in Pkd1+/- and Pkd1+/+ males and females, but no significant difference was detected between the heterozygous and the wild type groups. Our results provide direct evidence that haploinsufficiency for Pkd1 results in anatomic and functional abnormalities of the kidney and suggest that Pkd1 haploinsufficiency may result in a reduced number of nephrons by diminishing renal tubule branching during nephrogenesis

Les modules photovoltaïques à concentration (CPV) ont tendance à se miniaturiser. D’une part, la distance focale plus courte des optiques de concentration permet de réduire le besoin en matériaux pour l’assemblage du module ; et d’autre part, le rendement des modules est sensiblement meilleurs que ceux des modules CPV de taille normale. L’étude de chaque élément de la chaine de pertes dans la littérature des micro-concentrateurs a permis de confirmer cette tendance. Cette thèse aborde les problématiques de coût et de rendement à travers la conception optique d’un concentrateur à deux étages de lentilles, sa fabrication puis une étude approfondie de ses performances.La méthode de conception, développée à partir de lois d’optique géométrique et non-imageante, définit le profil des lentilles à λ=589nm en premiers lieux. Ensuite, une simulation par tracé de rayons permet d’optimiser ces lentilles pour l’ensemble du spectre solaire puis d’étudier l’impact de leur désalignement lors de la mise en module. Les limites des déplacements des éléments du module ainsi déterminées conditionnent la précision de sa fabrication. Dans notre cas, l’alignement est réalisé automatiquement par un jeu de repères mécaniques lors du moulage simultané des optiques primaires (POE) et des optiques secondaires (SOE). Contrairement aux procédés habituels, ce procédé de moulage innovant permet d’assembler un module en seulement trois étapes au lieu de cinq.Pour caractériser les micro-concentrateurs réalisés, une méthode de mesure du rapport module à cellule (CTM) est développée. Pour cela, le rendement des cellules est mesuré en simulateur solaire avant et après leur mise en module. Les cellules multi-jonctions mises en œuvre étant sensibles aux variations spectrales et spatiales de l’éclairement, la validation préalable de ces mesures est primordiale. En complément du CTM qui quantifie la somme des pertes introduites lors de la mise en module, d’autres mesures sont développées pour comprendre la chaine de perte plus en détails.Le dispositif étudié au cours de cette thèse utilise des cellules triple-jonction de 0,6 x 0,6mm² avec une concentration de 1000X et atteint un rendement de 29%. Le CTM est de 70% et l’analyse de la chaine de perte montre que le procédé inventé n’impacte pas ou peu les performances du module. De plus, la détermination de la chaine de perte montre que les pertes par réflexion et par absorption sont prédominantes, au même titre que les pertes dues à la diffusion des lentilles ainsi que les pertes dues aux non-uniformités d’éclairement sur la cellule. / The actual trend of CPV is the micro-scaling of modules. A bibliographic study shows that shorter focal length of optics implies less material consumption in manufacturing and an enhanced efficiency of the modules. In this thesis, a double stage refractive micro-concentrator is designed, manufactured and characterized. First, the optical design of the concentrator is based on non-imaging technics. Thus, the profile of the lenses is generated for a single wavelength. Then, a ray tracing simulator is used to optimize the lens profile for the overall solar spectrum and study the concentrator element misalignment effect on the performances.Secondly, a three steps self-assembly process is developed instead of the usual five steps one. Both POE and SOE lenses of our device are molded simultaneously and a mechanical guidance system in the mold ensures the alignment of the micro-concentrator elements (POE, SOE and Cell).Finally, the performances measurements of the manufactured modules are managed in solar simulators in which the lightening condition are previously studied and validated. Comparing the bare cells efficiency with the module efficiency, the cell-to-module ratio (CTM) represents the overall losses in the module. Further experiments are managed to quantify each loss of the module. The manufactured and characterized micro-concentrator is a 1000X concentrating ratio with 0.6 x 0.6mm² triple junction cells. It efficiency is 29% with a 70% CTM. Finally, the loss chain study reveals that the three steps self-assembly process is reliable.

Estudos hodológicos sugerem um dimorfismo sexual das projeções da área incerto-hipotalâmica (IHy), com áreas relevantes para o controle reprodutivo mais densamente inervadas em fêmeas. Estudos funcionais mostraram que o RNAm do precursor do hormônio concentrador de melanina (ppMCH) varia apenas na IHy, durante o ciclo estral e é reduzido em ratas em anestro induzido por restrição alimentar (RA). Nosso objetivo foi analisar em camundongos fêmeas, as alterações na morfologia de útero e ovários e na expressão do RNAm do ppMCH da IHy ocasionadas pelo anestro induzido por RA. Para isso, camundongos fêmeas C57BL/6 foram distribuídas em controle (C), restrito (R; ração = 70% do C) e realimentado (RR). Os animais R foram perfundidos após 4, 8 e 12 dias para coleta de encéfalo, útero e ovários. Houve um aumento no número de folículos antrais nos animais R12 comparados ao R4 e redução da área uterina nos animais R8 com recuperação dos RR. Não foi possível detectar alterações na expressão do RNAm do ppMCH na IHy. / Hodological studies suggest a sexual dimorphism of the incerto-hypothalamic area (IHy) projections since relevant areas to the reproductive control are more densely innervated in females. Functional studies have shown that the MCH precursor mRNA (ppMCH) varies only in the IHy during the estrous cycle of an intact rat and is decreased in anestrus rats induced by food restriction. We aim to analyze, in female mice, the changes in uterine and ovarian morphology and expression of IHy ppMCH mRNA in anestrus induced by food restriction. For this, C57BL/6 female mice were distributed in control (C), food restricted (FR) and refed (RR). FR were perfused after 4, 8 and 12 days to collect the brain, uterus and ovaries. Our results show an increased number of antral follicles of R12 compared to R4 and a reduction in the uterine area of R8 with restoration in RR. It was not possible to detect changes in ppMCH mRNA expression in IHy.

Vários estudos mostram que na doença renal policística autossômica dominante os cistos surgem a partir de um mecanismo de "dois-golpes". A patogênese das manifestações não-císticas, contudo, é pouco compreendida. Neste estudo usamos uma linhagem de camundongos endogâmica com uma mutação nula em Pkd1, onde animais heterozigotos apresentam formação cística renal mínima até 40 semanas de idade. O clearance de inulina e o número de glomérulos foram menores em machos Pkd1+/- que Pkd1+/+, enquanto o volume glomerular médio foi maior em heterozigotos. A excreção urinária de NO2/NO3 não diferiu significantemente entre os dois grupos. Avaliamos a osmolalidade urinária máxima em machos e fêmeas Pkd1+/- and Pkd1+/+, porém não foi detectada diferença significante entre os grupos heterozigoto e selvagem. Nossos resultados oferecem evidência direta de que a haploinsuficiência de Pkd1 resulta em anormalidades anatômicas e funcionais renais e sugerem que o estado haploinsuficiente de Pkd1 possa resultar na redução do número de néfrons por diminuir a ramificação tubular renal durante a nefrogênese / Several studies show that in autosomal dominant polycystic kidney disease cysts arise through a "two-hit" mechanism. The pathogenesis of non-cystic features, however, is poorly understood. In this study we used an inbred mouse line with a null mutation of Pkd1, where heterozygotes had minimal renal cyst formation up to 40 weeks of age. Inulin clearance and the number of glomeruli were lower in Pkd1+/- than in Pkd1+/+ males, while a higher average glomerular volume was observed in heterozygotes. The urinary excretion of NO2/NO3 did not significantly differ between the two groups. Maximal urinary osmolality was evaluated in Pkd1+/- and Pkd1+/+ males and females, but no significant difference was detected between the heterozygous and the wild type groups. Our results provide direct evidence that haploinsufficiency for Pkd1 results in anatomic and functional abnormalities of the kidney and suggest that Pkd1 haploinsufficiency may result in a reduced number of nephrons by diminishing renal tubule branching during nephrogenesis

Les centrales solaires à concentration industrielles consomment 4 m3/MWh d’eau pour le refroidissement de leur cycle thermodynamique. En environnement aride, cela est susceptible d'induire des conflits d’usages sur une ressource encore plus fondamentale que l’électricité, l'eau. Ce constat met en évidence la nécessité de concevoir des solutions alternatives de refroidissement sèches mais tout aussi efficaces. Le champ solaire d’une centrale CSP représente 50% de son coût d’investissement pour n’être utilisé que de jour pour la production de chaleur nécessaire au cycle thermodynamique. L'approche du sujet de thèse consiste à utiliser cette surface considérable comme macro-échangeur de chaleur avec son environnement via un transfert thermique couplé avec l'air ambiant (convectif) et avec l'espace extra-atmosphérique à 3K (radiatif). Après avoir démontré la pertinence des matériaux du champ solaire pour une telle application, le travail de thèse a montré expérimentalement qu'au-delà d'extraire les chaleurs fatales du cycle thermodynamique, il pouvait aussi produire du froid par transfert radiatif nocturne. Une solution alternative innovante pour le refroidissement des centrales solaires CSP offrant deux nouvelles fonctionnalités à leur champ solaire déjà existant au bénéfice de son amortissement. / Industrial concentrated solar power plants consume 4 m3/MWh of water to cool down their thermodynamic cycle. In arid area, it could induce conflicts of use on a more fundamental resource than electricity. This fact highlights the need to develop alternatives dry cooling technologies but equally effective. The solar field represents 50% of the investment cost of a CSP plant to be used only daily for the heat production needed for the thermodynamic cycle. The approach of the project is to use this huge area as macro-heat exchanger with its surrounding environment through a coupled heat transfer with the ambient air (convective) and with outer space at 3K (radiative). After validating the compatibility of solar field materials for a such application, these research works has shown experimentally that in addition to extract the waste heat of the thermodynamic cycle, it could also produce cold by night radiative cooling. An innovative alternative solution for cooling CSP plants offering two new features to their already existing solar field for the benefit of its paying off.

Convaincu de l’intérêt et du potentiel des matériaux naturels et des déchets industriels, cette thèse a contribué à la mise au point de matériaux de stockage de la chaleur (TESM) pour les CSP en Afrique de l’Ouest. Plus spécifiquement, ce travail de recherche a porté sur la valorisation de la latérite du Burkina Faso, des cendres de foyer des centrales à charbon de la société SONICHAR au Niger, des résidus en carbonate de calcium (chaux) de l’industrie de production de l’acétylène au Burkina Faso et l’huile végétale de Jatropha curcas de la société Belwet au Burkina Faso. Les résultats de cette étude ont permis de montrer que l’huile de Jatropha curcas peut être considérée comme une alternative viable aux fluides de transfert et aux TESM conventionnels pour les CSP fonctionnant à 210 °C. Les matériaux élaborés à partir des cendres de foyer et de la latérite présentent un caractère réfractaire en raison de la présence de mullite et de spinelle. L’ajout de chaux permet de réduire le point de fusion tout en préservant le caractère réfractaire et conducteur des phases obtenues. En raison de leurs stabilités, et l’absence de conflit d'utilisation, les matériaux obtenus peuvent être utilisés comme TESM dans CSP à des températures allant jusqu’à 900 °C. / Convinced of the interest and potential of natural materials and industrial waste, this thesis has contributed to the development of heat storage materials (TESM) for CSPs in West Africa. More specifically, this research focused on the valorization of laterite from Burkina Faso, the bottom ashes from the coal-fired power plants of SONICHAR in Niger, residues of calcium carbonate (lime) from the acetylene in Burkina Faso and the vegetable oil of Jatropha curcas from the company Belwet in Burkina Faso. The results of this study showed that Jatropha curcas oil can be considered as a viable alternative to conventional HTF and TESM for CSP operating at 210 °C. The materials elaborated from bottom ashes and laterites present a refractory character due to the presence of mullite and spinel. The addition of lime makes it possible to reduce the melting temperature while preserving the refractory and conductive character of the obtained phases. Due to their stabilities, and the absence of conflict of use, the obtained materials can be used as TESM in CSP at temperatures up to 900 °C.

In concentrated solar power (CSP) stations, large arrays of mirrors which are capable of changing its orientation are used to reflect the incident solar energy to a stationary receiver kept at a distance. Such mirrors are often called as heliostats. The receiver contains a heat absorbing medium like molten salt. By absorbing the thermal energy reflected from thousands of heliostats, the temperature would reach around 6000C and the heat can be used in thermal power plants to generate steam and thus run a turbine to produce electricity. One of the biggest advantages of CSP over conventional energy harvesting from Sun is that it can generate electricity during night for long hours of time from the thermal energy stored during daytime. This eliminates the usage of batteries or any other energy storing methods. The conversion efficiency is also high in CSP due to the high temperature achieved. With prior knowledge of the station coordinates, viz., the latitude and longitude, the day of the year and time, the direction or the path of sun can be fully determined. Typically, the sun's motion is tracked by the azimuth-elevation (Az-El) or the target-aligned configuration heliostats. In both these approaches, the mirror needs to be moved about two axes independently using two actuators in series with the mirror effectively mounted at a single point at the centre. This arrangement causes the mirror to deform in presence of gusty winds in a solar field which results in loss of pointing accuracy. Typically a beam error of less than 2-3 mrad is desirable in a large solar field and this value also includes other sources of loss of pointing accuracy like gravity and wind loading. In order to prevent this, a rigid support frame is required for each of the heliostats. In this work, two three degree-of-freedom parallel manipulators, viz., the 3-UPU wrist and 3-RPS, have been proposed to track the sun in central receiver systems. The main reasons for choosing a parallel manipulator as heliostat are its desirable characteristics like large load carrying capacity, high accuracy in positioning the mirror and easy to obtain the inverse kinematics and convenient for real time control. The proposed parallel manipulators support the load of the mirror, structure and wind loading at three points resulting in less deflection and thus a much larger mirror can be moved with the required tracking accuracy and without increasing the weight of the support structure. The algorithm for sun tracking is developed, extensive simulation study with respect to actuations required, variation of joint angles, spillage loss and leg intersection has been carried out. Using FEA, it is shown that for same sized mirror, wind loading of 22 m/s and maximum deflection requirement (2 mrad), the weight of the support structure is between 15% and 60% less with the parallel manipulators when compared to azimuth-elevation or the target-aligned configurations. A comprehensive study on stroke minimization of prismatic joints is carried out. It is found that a stroke of 700 mm is required for a 2 m x 2 m heliostat at Bangalore when the farthest heliostat is at a distance of 300 m from the tower. Although, there is an extra motor required to track the sun, the 3-RPS manipulator is better than the conventional methods if the mirror area per actuator criteria is taken into consideration. Prototypes of the Az-El and 3-RPS heliostats were made with a mirror size of 1 m x 1 m. A PID controller implemented using MATLAB-Simulink and a low cost, custom made motor driver circuit is used to control the motion of the 3-RPS heliostat. The algorithm developed is tested on the prototype by tracking a point marked on the wall of the lab space and is found to have a tracking error of only 7.1 mrad. Finally, the actual sun tracking is carried out on the roof of a building reflecting the sun-light to a wall situated 6.72 m above and a distance of 15.87 m from the heliostats. The images are captured at various instances of time from 11:30 a.m. to 3:30 p.m. on October 15th and November 10th, 2016, tracking errors are quantified and it is demonstrated that the proposed 3-RPS parallel manipulator can indeed work as a heliostat in concentrated solar power plants.

In Swedish dialects we find the terms ris, skäver and skärva referring to illnesses in children. The words are also parts of various compounds which refer to variants of the illnesses. The terms are linguistic expressions denoting two folk categories of illnesses, RIS and SKÄVER/SKÄRVA. These categories are investigated from a cognitive semantic perspective. The cognitive perspective argues that we organize our understanding of reality by using Idealized Cognitive Models (ICM) based on our physical, mental and emotional experiences of the world. The aim is twofold: to demonstrate the bases on which an experienced illness is placed in a certain category, and to show how a folk conception of illness is reflected in the word formation strategies. The word formation strategies emanate from notions of characteristic symptoms, and from notions of causes of illnesses. Both categories, RIS and SKÄVER/SKÄRVA, are based on a number of ICM's. The category RIS is a radial structure, which means that the category is held together although its members have no structural criteria in common. The category SKÄVER/SKÄRVA is a concentrating structure, meaning that all members share all structural criteria. There is a strong connection between word formation strategies and the structures of the categories. Terms related to symptoms refer to members of a category which are part of a radial structure, while terms related to causes refer to members of a category which are part of a concentrating structure. This can be explained by two of the basic assumptions of cognitive semantics: semantic content is structred and symbolized overtly on the surface form of a language and categories are conventional, based on cultural assumptions about the world. / digitalisering@umu

Par rapport aux ressources énergétiques fossiles combustibles, l’énergie solaire présente des caractéristiques inhérentes à la nature même de la ressource. Ce constat met en évidence la nécessité de système de stockage d’énergie. Ce travail de thèse consiste à étudier un stockage thermique pour une centrale solaire à concentration, ainsi que ses deux composants essentiels : le fluide de transfert et les matériaux de garnissage solides. La compréhension du système de stockage thermocline sur lit de roche est réalisée grâce à une approche expérimentale et numérique. Une alternative innovante sur le choix du fluide de transfert consiste à utiliser des huiles végétales. Concernant le garnissage, un matériau à géométrie contrôlée est développé à partir d’un coproduit issu de la sidérurgie. L’originalité de cette association pour le stockage thermique permet d’allier performance, disponibilité des matériaux en quantité industrielle tout en réduisant l’impact environnemental et financier. / Compare to fossil fuel energy resources, solar energy presents the inherent characteristic given by the very nature of the resource (intermittent availability). This observation highlights the need for thermal energy storage system. This doctoral thesis studies thermal energy storage for concentrating solar power plant, as well as its two essential components: the heat transfer fluid and the thermal energy storage materials. The analysis of the thermocline storage system with filler materials is achieved through experimental and numerical approaches. An innovative alternative for the heat transfer fluid consists to use vegetable oils, which offers comparable thermal properties and operating behavior to conventional thermal fluid. Regarding thermal energy storage materials, many natural and recycled materials can be used. A storage material with controlled geometry is developed from steel industry co-product. The originality of this combination for thermal energy storage combines performance, materials availability at industrial scale while reducing environmental and financial impact.

Plant invertases are a class of proteins that have enzymatic function in cleaving sucrose to fructose and glucose. Cell wall invertase, located on the exterior of the cell wall of plant cells, plays a key role in the unloading of sucrose from the apoplast to the sink tissues. Cell wall invertase interacts with an inhibitor, cell wall invertase inhibitor, post-transcriptionally to regulate its activity. The inhibitor is constitutively expressed in pollen development, early developing seeds, and senescing leaves: indicative of sucrose allocation being a limiting factor at these stages of development. We introduced algal bicarbonate transporters LCIA/CCP1 to Camelina sativa for the purpose of increasing photosynthetic capacity. The bicarbonate transporters concentrate CO2 at RuBisCO by pumping CO2 in the form of bicarbonate through the membrane, then converting it back to CO2 at RuBisCO, increasing CO2 concentration. Results from these plants have shown an increase in seed number, but not seed mass, along with a faster rate of maturity and senescence. This is indicative of acclimation to high CO2 conditions, resulting from insertion of the bicarbonate transporters. RNA sequencing was performed and a putative invertase inhibitor was recognized as being expressed in the transgenic C. sativa but not in the wild type. Our strategy is to knock out two invertase inhibitors using induced RNA silencing, dramatically altering sucrose allocation into developing seeds and resulting in an increase in seed biomass. It is the aim of this research to increase the biomass of C. sativa seeds in order to increase its effectiveness as an agent to create sustainable biofuels.