The syntheses of novel poly(paraphenyleneethynylene)s, PPEs, and poly(aryleneeethynylene)s, PAEs, as well as hybrid poly(paraphenyleneethynylene)- poly(paraphenylenevinylene)s, PPE-PPVs, are presented. Fluorescent PPEs decorated with biologically relevant ligands are utilized in model biosensing schemes. PPE-PPV hybrids, as well as their highly emissive oligomeric, cruciform model compounds are studied in an effort to modify the bandgap of the parent PPE backbone. Improved hole and electron injection capabilities are demonstrated with these hybrid conjugated materials. Structural variation and morphological effects of PPEs, PPE-PPVs and model compounds are studied to elucidate the effects upon the photophysical properties of the emissive materials.

This thesis proposes a novel technique using a phase-lock loop (PLL) style phase control loop to achieve retrodirective phased array antenna steering. This novel approach introduces the concept of phase scaling and frequency translation. It releases the retrodirective transmit-receive frequency ratio from integer constraints and avoids steering approximation errors. The concept was developed to achieve automatic and precise beam steering for the solar power satellite (SPS). The testing was performed using a transceiver converting a pair of received 2.9 GHz signals down to 10 MHz, and up converting two 10 MHz signals to 5.8 GHz. Phase scaling and conjugation was performed at the 10 MHz IF using linear XOR phase detectors and a PLL loop to synthesize a 10 MHz signal with conjugate phase. A phase control loop design is presented using PLL design theory achieving a full 2π steering range. The concept of retrodirective beam steering is also presented in detail. Operational theory and techniques of the proposed method are presented. The prototype circuit is built and the fabrication details are presented. Measured performance is presented along with measurement techniques. Pilot phase detectors and PCL achieve good linearity as required. The achieved performance is benchmarked with standards derived from likely performance requirements of the SPS and beam steering of small versus large arrays are considered.

This thesis arose from a desire to better understand the structures of automorphism groups and inner automorphism groups of quandles. We compute and give the structure of the automorphism groups of all dihedral quandles. In their paper Matrices and Finite Quandles, Ho and Nelson found all quandles (up to isomorphism) of orders 3, 4, and 5 and determined their automorphism groups. Here we find the automorphism groups of all quandles of orders 6 and 7. There are, up to isomoprhism, 73 quandles of order 6 and 289 quandles of order 7.

Virtual aperture culling of the eigenmodes of a resonator (VACER) is a technique to focus light within turbid media at arbitrary locations. A seed pulse of light is directed through a phase-conjugate mirror (PCM) into a turbid medium. Though much of the light may be lost, any light which reaches the second PCM is phase conjugated and thus returned to the first PCM where the light will be phase conjugated again. Amplification by the PCMs can prevent decay of the light cycling between the PCMs. Introducing a mechanism which filters light based on position enables attenuation of the modes not traveling through the center of the virtual aperture resulting in a focusing of light at the center of the virtual aperture. The seed pulse and the positioning of the PCMs on opposite sides of the virtual aperture ensure that modes cannot bypass the virtual aperture. Magnetic fields and ultrasound waves are potential means for implementation of a virtual aperture. Generally, only weak filtration mechanisms like magnetic fields and ultrasound waves are innocuous to turbid media. Fortunately, weak effects can strongly cull modes in VACER because the filtration mechanism affects the modes during each pass between PCMs and the modes compete. A combination of theory and computational modeling prove that sound physical principles underlie VACER. Moreover, computational modeling reveals how mode overlap, the seed pulse, and other variables impact VACER performance. Good experimental performance is predicted. / text

published_or_final_version / Chemistry / Doctoral / Doctor of Philosophy

The ability of sub 100 nm nanoparticles to target and modulate the biology of cells will enable major advancements in cellular imaging and therapy in cancer and atherosclerosis. A key challenge is to load an extremely high degree of targeting, imaging, and therapeutic functionality into small, yet stable particles. A general mechanism is presented for thin autocatalytic growth on nanoparticle substrates (TAGS), as demonstrated for a homologous series of < 5 nm textured Au coatings on < 42 nm iron oxide cluster cores. Very low Au supersaturation levels are utilized to prevent commonly encountered excessive autocatalytic growth that otherwise produce thick shells. The degree of separation of nucleation to form the seeds from growth is utilized to control the morphology and uniformity of the thin Au coatings. The thin and asymmetric Au shells produce strong near infrared (NIR) absorbance with a cross section of ~10⁻¹⁴ m², whereas the high magnetic content per particles provides strong r2 spin-spin magnetic relaxivity of 200 mM⁻¹s⁻¹. TAGS may be generalized to a wide variety of substrates and high energy coatings to form core-shell nanoparticles of interest in a variety of applications as diverse as catalysis and bionanotechnology. High uptake of the nanoclusters by macrophages is facilitated by the dextran coating, producing intense NIR contrast both in cell culture and an in vivo rabbit model of atherosclerosis. A novel conjugation technique further allows covalent binding of anti-epidermal growth factor receptor (EGFR) monoclonal antibody (Ab) to the nanoclusters for highly selective targeting to EGFR over expressing cancer cells. AlexaFluor 488 tagged Ab nanocluster conjugates were prepared to correlate the number of conjugated Abs with the hydrodynamic diameter. The high targeting efficacy was evaluated by dark field reflectance imaging and atomic absorbance spectrometry (AAS). Colocalization of the nanoparticles by dual mode in-vitro imaging with dark field and fluorescence microscopy demonstrates the Abs remained attached to the Au surfaces. The extremely high curvature of the Au shells with features below 5 nm influence the spacing and orientations of the Abs on the surface, which has the potential to have a marked effect on biological pathways within cells. These targeted small multifunctional nanoclusters may solve some key molecular imaging challenges for cancer and atherosclerosis. / text

Protein PEGylation (covalent attachment of poly(ethylene glycol) or PEG to proteins) is an excellent example of a drug delivery system that improves pharmacokinetics and pharmacodynamic properties of therapeutics. However, although PEGylation is clinically proven and attracts both scientific and commercial interest, the technique is associated with many process constraints, in particular related to controlling the number of conjugated PEG chains. A novel, solid-phase PEGylation methodology was attempted to overcome the drawbacks of the commonly used solution-phase methods for preparing PEGylated products. The solid-phase PEGylation methodology involved conjugating protein onto a tethered PEG derivative attached onto a solid matrix, followed by hydrolytic cleavage of the PEG chain from the solid matrix under mild conditions to yield PEGylated protein in free solution. PEGs with molecular weights (MWs) 2000 and 4000 Da were used and a heterobifunctional PEG derivative, α-(β-alanine)-ω-carboxy PEG, with a cleavable β-alanine ester terminal was prepared for surface grafting and protein conjugation. The amine terminal of this PEG derivative was used for grafting PEG onto carboxy functionalized hydrophilic Sephadex and hydrophobic polystyrene derivatives. The free carboxyl terminal was used for protein conjugation via amine coupling. A kinetic study of PEG-surface grafting was performed to understand the influence of a number of parameters on the PEG surface concentration and its conformation, including temperature, reaction time, nature of the matrix, solvent and base, and MW of PEG. PEG grafted matrices were characterized using various surface characterization tools including Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Higher PEG grafting was observed with polystyrene matrices (up to 0.3 mmol/g) than either of the Sephadex derivatives (less than 0.15 mmol/g) using both molecular weights. Detailed surface characterization using XPS studies showed a layer thickness of 11.87 nm was achieved with polystyrene matrices using 4000 Da PEG derivatives after a grafting period of 72 hours at 40°C, indicating the presence of brush conformations for the grafted PEGs. In contrast, mushroom conformations were observed for PEG molecules grafted on both carboxymethyl and carboxypentyl Sephadex derivatives after the same reaction period, with a layer thickness of 2.62 nm and 4.14 nm respectively. Optimized PEG grafting and hydrolysis conditions were developed for solid-phase protein PEGylation using Cytochrome c as a model protein. The presence of PEGylated species were detected by size exclusion chromatography (SEC) from Sephadex derivatives but were absent when using polystyrene matrices. Both Sephadex derivatives gave mainly multi-PEGylated species with poor yields, in place of the expected mono-PEGylated products. A solution-phase PEGylation using the same PEG derivatives was performed successfully and various PEGylated species were identified and characterized using SEC and gel electrophoresis, based on their viscosity radius. An examination of the surface characteristics of the PEG-grafted was carried out by XPS, showing that protein conjugation was greatly influenced by surface force interactions, which depended on the PEG grafting densities and the nature of the solid matrices. Finally, fluorescent images obtained using confocal microscope with fluorescein isothiocyanate labelled Cytochrome c provided supporting evidence regarding the factors that constrained the solid-phase PEGylation process.

In situ protein detection in human tissues using antibodies reveals the cellular protein localization, and affinity-based proteomic studies can help to discover proteins involved in the development of diseases. However, antibodies often suffer from cross-reactivity, and the lack of positive and negative tissue controls for uncharacterized proteins complicates the mapping of the proteome. The aim of this thesis is thus to improve the methodology for validating antibodies used for immunostaining on formalin-fixed paraffin-embedded tissues. Two of the papers include comparisons between mRNA-expression and immunostaining of corresponding protein. In paper I, ISH and IHC staining patterns were compared on consecutive TMA-slides. The study of well-characterized genes showed that ISH could be used for validation of antibodies. ISH was further used for antibody evaluation, and could validate four out of nine antibodies showing potentially interesting staining patterns. In paper III, transcriptomic data generated by RNA-sequencing were used to identify tissue specific expression in lymphohematopoietic tissues. An increased expression in one or more of these tissues compared to other tissue types was seen for 693 genes, and these were further compared to the staining patterns of corresponding proteins in tissues. Antibody labeling is necessary for many immunoassays. In paper II, two techniques for antibody-biotinylation were compared, aiming to find a stringent labeling method for antibodies used for immunostaining on TMAs. The ZBPA-method, binding specifically to Fc-part of antibodies, was found to be superior to the Lightning Link-biotinylation kit targeting amine groups, since labeling of amine groups on stabilizing proteins in the antibody buffer causes unspecific staining. The localization of the estrogen receptor beta (ERβ) in human normal and cancer tissues was studied in paper IV. Thorough evaluation of 13 antibodies using positive and negative control cell lines showed that only one antibody, PPZ0506, is specific for ERβ in all three immunoassays used. Contradictory to previously published data, tissue profiling using PPZ0506 showed that ERβ is expressed in a limited number of normal and cancer tissues. In conclusion, the present investigations present tools for validation of antibodies used for large-scale studies of protein expression in tissues.

This thesis focuses on the chemical concept of conjugation, i.e., electron delocalization, and the effect it has on electronic and optical properties of molecules. The emphasis is on electron delocalization across a saturated σ-bonded segment, and in our studies these segments are either inserted between π-conjugated moieties or joined together to form longer chains. The electronic and optical properties of these compounds are probed and compared to those of traditionally π-conjugated compounds. The investigations utilize a combination of qualitative chemical bonding theories, quantum chemical calculations, chemical syntheses and different spectroscopic methods. Herein, it is revealed that a saturated σ-bonded segment inserted between two π-systems can have optical and electronic properties similar to a cross-conjugated compound when substituents with heavy Group 14 elements (Si, Ge or Sn) are attached to the central atom. We coined the terminology cross-hyperconjugation for this interaction, and have shown it by both computational and spectroscopic means. This similarity is also found in cyclic compounds, for example in the 1,4-disilacyclohexa-2,5-dienes, as we reveal that there is a cyclic aspect of cross-hyperconjugation. Cross-hyperconjugation can further also be found in smaller rings such as siloles and cyclopentadienes, and we show on the similarities between these and their cross-π-conjugated analogues, the fulvenes. Here, this concept is combined with that of excited state aromaticity and the electronic properties of these systems are rationalized in terms of “aromatic chameleon” effects. We show that the optical properties of these systems can be rationally tuned and predicted through the choice of substituents and knowledge about the aromaticity rules in both ground and excited states. We computationally examine the relation between conjugation and conductance and reveal that oligomers of 1,4-disilacyclohexa-2,5-dienes and related analogues can display molecular cord properties. The conductance through several σ-conjugated silicon compounds were also examined and show that mixed silicon and carbon bicyclo[2.2.2]octane compounds do not provide significant benefits over the open-chain oligosilanes. However, cyclohexasilanes, a synthetic precursor to the bicyclic compounds, displayed conformer-dependent electronic structure variations that were not seen for cyclohexanes. This allowed for computational design of a mechanically activated conductance switch.

Over the past decade, solid-state nanopores have emerged as a versatile tool for the detection and characterization of single molecules, showing great promise in the field of personalized medicine as diagnostic and genotyping platforms. While solid-state nanopores offer increased durability and functionality over a wider range of experimental conditions compared to their biological counterparts, reliable fabrication of low-noise solid-state nanopores remains a challenge. In this thesis, a methodology for treating nanopores using high electric fields in an automated fashion by applying short (0.1-2 s) pulses of 6-10 V is presented which drastically improves the yield of nanopores that can be used for molecular recognition studies. In particular, this technique allows for sub-nanometer control over nanopore size under experimental conditions, facilitates complete wetting of nanopores, reduces noise by up to three orders of magnitude and rejuvenates used pores for further experimentation. This improvement in fabrication yield (over 90%) ultimately makes nanopore-based sensing more efficient, cost-effective and accessible. Tuning size using high electric fields facilitates nanopore fabrication and improves functionality for single-molecule experiments. Here, the use of nanopores for the detection of DNA-protein complexes is examined. As proof-of-concept, neutravidin bound to double-stranded DNA is used as a model complex. The creation of the DNA-neutravidin complex using polymerase chain reaction with biotinylated primers and subsequent purification and multiplex creation is discussed. Finally, an outlook for extending this scheme for the identification of proteins in a sample based on translocation signatures is presented which could be implemented in a portable lab-on-a-chip device for the rapid detection of disease biomarkers.