The report is a building evaluation of an area south of Karlskoga`s urban area on the west side of the lake Möckeln, known as the western Möckelnstranden. The evaluation is carried out on the behalf of Karlskoga municipality.  The goal of the evaluation that is based on a mission statement is to create a basis for Karlskoga municipality for a detailed plan and exploitation of the area. The inventory contains suggestions on what should and should not be done with the environment and its buildings. / Rapporten är en byggnadsinventering av ett område som ligger söder om Karlskoga tätort på västra sidan av sjön Möckeln, s.k. västra Möckelnstranden. Inventeringen görs på uppdrag av Karlskoga kommun.  Målet med inventeringen är att utifrån en uppdragsbeskrivning skapa ett underlag åt Karlskoga kommun inför en detaljplaneläggning och exploatering av området. Inventeringen innehåller förslag på vad som bör och inte bör göras med områdets miljö och dess bebyggelse.

Solid concrete Lego blocks can be used as temporary retaining wall systems or as wall separators between different materials such as sand, salt, compost, etc. The advantage of concrete blocks is that you can create temporary constructions. It is easy to move or expand the constructions when no casting is required between the blocks. The purpose of this study is to make models in the Finite Element (FE) software Abaqus/CAE that can be used for calculations of the capacity for interlocking blocks. FE method is an approximate method for solving differential equations. As the concrete blocks are stacked without casting, it is important to find out the construction’s load capacity when it is subjected to a horizontal load. Several types of structures have been modeled in the FE program Abaqus/CAE. These FE models were created with boundary conditions consisting of springs and a pinned connection that allows rotation.The evaluation has been focused on rotating the interlocking blocks. With the help of the FE models, reaction forces have been calculated. The FE results in term of reaction forces have been compared with hand calculations made ​​for the same models. Moreover, a wall and a wall with lateral supports have been simulated to determine the horizontal reaction force for the interlocking concrete blocks. / Massiva Lego betongblock kan ändvänds som tillfälliga stödmurar eller vägg avskiljare för olika material som salt, kompost, sand mm. Fördelen med betongblocken är att man kan skapa tillfälliga konstruktioner. Det är lätt att flytta eller bygga ut konstruktionen när ingen fog krävs mellan blocken. Syftet med denna studie är att skapa modeller i Finita Element (FE) programmet Abaqus/CAE som kan senare användas för beräkning av kapaciteten för sammankopplade block. FE Metoden är en approximativ metod för att lösa differential ekvationer. Eftersom betongblocken är staplade på varandra utan fog är det viktigt att ta reda på konstruktionens lastupptagnings förmåga när den är belastade med horisontalkrafter. Flera typer av konstruktioner har modellerats i FE programmet Abaqus/CAE. Dessa FE modeller har skapats med randvillkor som består av fjädrar och fasta lager som tillåter rotation. Utvärderingen har gjorts med fokus på vältningen i betongblocken. Med hjälp av dessa FE modeller har reaktionskraften tagits fram. FE resultaten i form av reaktionskrafter har sedan jämförts med handberäkningar gjorda för samma modeller. Vidare har en vägg och en vägg med sidostöd FE modellerats för att utvärdera horisontala deformationsegenskaper. / - / -

The defence unit´s archive stretches over a time limit between the middle of 1971 to the end of 1987. The records the archive mainly contains are concerning the civil defence, inspection and construction of shelters, war- and crisis planning. The majority of the records are registered record, as often is the case with an authority’s archives. The main problems that occurred concerned what should or shouldn´t be public, the principle of provenance and what to prioritize; finish the project before deadline or make sure the records are prepared for a storage that ideally should last for several lifetimes.

When designing educational programme in the field of heritage conservation, community service learning approach may not be the first thing that comes to most heritage conservation educator’s mind. In this study the researcher has engaged in a discussion of the association of community service learning to heritage conservation education. The researcher have tried to make clear why she believe that community service learning, as an innovative pedagogical approach, has important things to say about today’s heritage conservation education. Proceeding from fieldworks, through analysis to explanation, based on direct and participant observations and interviews; two heritage training projects are reviewed to illustrate how community service learning can facilitate heritage conservation education. The researcher hope that other researchers will learn from the study, and educators will be able to critically examine which kind of pedagogical approach is more appropriate for today’s heritage conservation education. / published_or_final_version / Conservation / Master / Master of Science in Conservation

The Lower Mainland of British Columbia is growing rapidly resulting in a dramatic alteration of the landscape. Associated with this growth is the loss of community heritage structures and properties. This destruction is occurring at a rapid rate even though conservation mechanisms, tools and strategies exist. This thesis examines the practice of heritage conservation and identifies the heritage conservation tools that are presently being utilized by a number of selected Lower Mainland municipalities. It then outlines the necessary conditions that a community must possess for existing conservation tools to be effective. A literature review of existing heritage conservation statutes was conducted to identify the statutory tools available for conservation purposes. The primary method of investigation involved interviewing 13 prominent heritage professionals from the Provincial Government, selected Municipal Governments, and the private planning sector. The survey allowed the author to generate a ‘tools chest’ of mechanisms available for conservation purposes. In total 23 conservation tools were identified from both the literature review and survey. Research indicated that the perceived responsibility for heritage conservation in British Columbia rested with local governments. To date these governments have had limited success in ensuring long term management and protection of heritage properties within their jurisdictions. Conservation tools presently being applied to manage these community resources are limited in scope and applicable only under specific ownership conditions. In general, local governments are under utilizing the conservation tools available to them. Reasons for this may include the lack of political and public support, in addition to, monetary and time restraints directed for this purpose. This study concludes with recommendations for local governments and the planning profession regarding the direction which these groups should embark on with future conservation activities.

This project attempts to break down categorization and systems of thought based on opposing qualities. Instead, disparate elements are considered to work together to increase their individual properties by creating a new property - a condition comprised of the individual elments yet also surpassing them. The word "hybrid" is appropriated to describe the nature of this investigation - the renovation of a turn-of-the-century warehouse building into a multi-use building. The project attempts to describe how a building that contains a range of disparate programmatic elements can go beyond each element's exclusivity to produce a condition in which the resultant is greater than the sum of the individual parts. The project looks at breaking down specific delimitors of adjacent programmatic elements and promotes cross-fertilization between them with the intended result of blurring the seams that separate one from the other. The intent is to investigate, through a series of minimal moves dictated by the conditions of the site and program, whether a condition of richer and more varied experience can be achieved and, as a result, provide a start for defining a condition of architectural hybridity. Due to the size of the building that is investigated, this project focuses on two areas of the building, the insertion of a courtyard and the insertion of a fissure, or crack. The point of these investigations is to provide a tactical solution for the specificities of this particular site while at the same time implying a larger, global strategy that not only infers the remainder of this building but includes similar building types in other locations.

Thesis (M.Tech.: Library and Information Studies)-Durban University of Technology, 2006. xii, 210 leaves. / This study was aimed at investigating the digital scanning of photographs in archival collections with a view to highlighting some of the key issues in the provision of a digital imaging service.

Abstract available in pdf file.

This creative project creates a preservation plan for Dwenger Hall, located on the campus of Saint Joseph's College of Rensselaer, Indiana. The building was designed by the college's first president and constructed by students of the college in 1907-08. Vacant since 1998, the building is an excellent example of decorative concrete block construction. Because of its architectural and historical significance, the building merits the attention to develop an appropriate preservation plan.The plan contains a physical and social history of the building placing it in the historic context of Saint Joseph's College. The history includes early activities of the college with specifics on the construction and use of Dwenger Hall. The plan also includes a physical description of the building in its current state. The final sections of the plan describe the existing conditions, and prioritize recommendations for the preservation of the building.The recommendations for preservation are designed to preserve the building in three stages; immediate work, mothballing, and minimal general reuse requirements. The Plan's goal is to emphasize the value of this architectural and historical landmark by defining what makes it significant and how to preserve it for future generations. / Department of Architecture

The National Park Service has provided guidance to the public for years regarding weatherization measures for historic houses. Some of this guidance advised against installing wall insulation, citing the potential for moisture condensation resulting in structural damage. With the passage of the American Recovery and Reinvestment Act in 2009, a substantial investment was made in the 30 year old Weatherization Assistance Program, which provides federal funds for home weatherization. The program has used wall insulation with no reported problems and proven energy savings. Some State Historic Preservation Offices (who review federally funded actions) protested the use of wall insulation based on the NPS guidance, especially Preservation Brief #3. This thesis describes the fundamental differences between the preservation community’s approach to energy efficiency as compared to the weatherization community’s approach, and addresses some concerns of historic preservation officials regarding perceived potential damage of some weatherization measures, including wall insulation. / Introduction : HP and DOE programmatic agreement -- Energy efficiency guidance from the historic preservation community -- Guidance from the weatherization community -- Analysis of differences between preservation guidance and DOE guidance -- Recommendations. / Department of Architecture