Spelling suggestions: "subject:"Dichte < biophysik> "" "subject:"Dichte < geophysik> ""
1 |
Optimierung der Raumausfüllung und der Komponentenverteilung von MultikompositzementenPalm, Sebastian January 2009 (has links)
Zugl.: Clausthal, Techn. Univ., Diss., 2009
|
2 |
Untersuchungen zum Einfluss der durch unterschiedliche Zerkleinerungsarten hervorgerufenen Formen von Goldpartikeln auf ihre Aufbereitbarkeit mittels DichtesortierungMarques Ayres da Silva, Anna Luiza January 2008 (has links)
Zugl.: Aachen, Techn. Hochsch., Diss., 2008
|
3 |
Physical properties of lead free solders in liquid and solid state Physikalische Eigenschaften von bleifreiem Lot in flüssigem und festem Zustand /Mhiaoui, Souad, January 2008 (has links)
Chemnitz, Techn. Univ., Diss., 2007. / Dt.-Titel: Physikalische Eigenschaften von bleifreiem Lot in flüssigem und festem Zustand.
|
4 |
Zur Verwitterung und Konservierung kristallinen Marmors Untersuchungen zu physiko-mechanischen Gesteinskennwerten, zur Oberflächenchemie von Calcit und zur Anpassung und Überprüfung von Gesteinsschutzmitteln /Simon, Stefan. Unknown Date (has links)
Universiẗat, Diss., 2001--München.
|
5 |
Kolloidale Verarbeitung und Sintern von nanoskaligem TiN-PulverAlbayrak, Sener. Unknown Date (has links) (PDF)
Universiẗat, Diss., 1997--Saarbrücken. / Erscheinungsjahr an der Haupttitelstelle: 1997.
|
6 |
Physical properties of lead free solders in liquid and solid stateMhiaoui, Souad 15 April 2008 (has links) (PDF)
The European legislation prohibits the use of lead containing solders in Europe. However, lead free solders have a higher melting point (typical 20%) and their mechanical characteristics are worse. Additional problems are aging and adhesion of the solder on the electronic circuits. Thus, research activities must focus on the optimization of the properties of Sn-Ag-Cu based lead free solders chosen by the industry.
Two main objectives are treated in this work. In the center of the first one is the study of curious hysteresis effects of metallic cadmium-antimony alloys after thermal cycles by measuring electronic transport phenomena (thermoelectric power and electrical resistivity). The second objective, within the framework of “cotutelle” between the universities of Metz and of Chemnitz and supported by COST531, is to study more specifically lead free solders. A welding must well conduct electricity and well conduct and dissipate heat. In Metz, we determined the electrical conductivity, the thermoelectric power and the thermal conductivity of various lead free solders (Sn-Ag-Cu, Sn-Cu, Sn-Ag, Sn-Sb) as well in the liquid as well in the solid state. The results have been compared to classical lead-tin (Pb-Sn) solders. In Chemnitz we measured the surface tension, the interfacial tension and the density of lead free solders. We also measured the viscosity of these solders without and with additives, in particular nickel. These properties were related to the industrial problems of wettability and spreadability. Lastly, we solidified alloys under various conditions. We observed undercooling. We developed a technique of mixture of nanocristalline powder with lead free solders "to sow" the liquid bath in order to obtain "different" solids which were examined using optical and electron microscopy. / Die europäische Gesetzgebung verbietet die Benutzung von Lötmitteln, die Blei enthalten. Bleilose Lote haben aber einen höheren Schmelzpunkt (typisch 20%) und ihre mechanischen Eigenschaften sind schlechter. Zusätzliche Probleme sind das Alterungsverhalten und das Haftvermögen des Lots an den Leiterbahnen. Daher müssen sich Forschungsaktivitäten auf die Optimierung der Eigenschaften von bleifreien Sn-Ag-Cu (SAC) Loten konzentrieren, die von der Industrie gewählt wurden.
Zwei Hauptgebiete werden in dieser Arbeit bearbeitet. Im Zentrum des Ersten stehen seltsame Hysterese-Effekte von metallischen Kadmium- Antimon Legierungen bei thermischen Zyklen, wobei Transporteigenschaften wie die thermoelektrische Kraft und der elektrische Widerstand untersucht werden. Die zweite Aktivität, die in einer Kooperation der Universitäten Metz und Chemnitz (cotutelle) bearbeitet und die durch COST531 unterstützt wird, besteht in der detaillierten Erforschung des Lötprozesses ohne Blei. Eine Lötverbindung muß den Strom gut führen und die Wärme gut ableiten. In Metz haben wir die elektrische Leitfähigkeit, die thermoelektrische Kraft und das Wärmeleitvermögen bestimmt für verschiedene bleilose Lote (Sn-Ag-Cu, Sn-Cu, Sn-Ag, Sn-Sb), sowohl im flüssigen als auch festen Zustand. Die Ergebnisse wurden mit dem klassischen bleihaltigen Lötzinn (Sn-Pb) verglichen. In Chemnitz haben wir die Oberflächen- und Grenzflächenspannung und die Dichte bleifreier Lote gemessen. Ebenfalls wurde die Viskosität dieser Lote ohne und mit Zusätzen (insbesondere Nickel) gemessen. Diese Eigenschaften wurden in Beziehung gesetzt zu den industriellen Problemen der Benetzbarkeit und des Fließverhaltens. Schließlich haben wir Legierungen unter verschiedenen Bedingungen verfestigt. Wir haben Unterkühlung beobachtet. Wir haben eine Technik entwickelt, basierend auf einer Mischung von Lot mit Pulver. Durch "Einsäen" von Nanokristallen in das flüssige Bad erhielten wir "verschiedene" Festkörper, die mit optischer und Elektronenmikroskopie untersucht wurden.
|
7 |
Physical properties of lead free solders in liquid and solid stateMhiaoui, Souad 17 April 2007 (has links)
The European legislation prohibits the use of lead containing solders in Europe. However, lead free solders have a higher melting point (typical 20%) and their mechanical characteristics are worse. Additional problems are aging and adhesion of the solder on the electronic circuits. Thus, research activities must focus on the optimization of the properties of Sn-Ag-Cu based lead free solders chosen by the industry.
Two main objectives are treated in this work. In the center of the first one is the study of curious hysteresis effects of metallic cadmium-antimony alloys after thermal cycles by measuring electronic transport phenomena (thermoelectric power and electrical resistivity). The second objective, within the framework of “cotutelle” between the universities of Metz and of Chemnitz and supported by COST531, is to study more specifically lead free solders. A welding must well conduct electricity and well conduct and dissipate heat. In Metz, we determined the electrical conductivity, the thermoelectric power and the thermal conductivity of various lead free solders (Sn-Ag-Cu, Sn-Cu, Sn-Ag, Sn-Sb) as well in the liquid as well in the solid state. The results have been compared to classical lead-tin (Pb-Sn) solders. In Chemnitz we measured the surface tension, the interfacial tension and the density of lead free solders. We also measured the viscosity of these solders without and with additives, in particular nickel. These properties were related to the industrial problems of wettability and spreadability. Lastly, we solidified alloys under various conditions. We observed undercooling. We developed a technique of mixture of nanocristalline powder with lead free solders "to sow" the liquid bath in order to obtain "different" solids which were examined using optical and electron microscopy. / Die europäische Gesetzgebung verbietet die Benutzung von Lötmitteln, die Blei enthalten. Bleilose Lote haben aber einen höheren Schmelzpunkt (typisch 20%) und ihre mechanischen Eigenschaften sind schlechter. Zusätzliche Probleme sind das Alterungsverhalten und das Haftvermögen des Lots an den Leiterbahnen. Daher müssen sich Forschungsaktivitäten auf die Optimierung der Eigenschaften von bleifreien Sn-Ag-Cu (SAC) Loten konzentrieren, die von der Industrie gewählt wurden.
Zwei Hauptgebiete werden in dieser Arbeit bearbeitet. Im Zentrum des Ersten stehen seltsame Hysterese-Effekte von metallischen Kadmium- Antimon Legierungen bei thermischen Zyklen, wobei Transporteigenschaften wie die thermoelektrische Kraft und der elektrische Widerstand untersucht werden. Die zweite Aktivität, die in einer Kooperation der Universitäten Metz und Chemnitz (cotutelle) bearbeitet und die durch COST531 unterstützt wird, besteht in der detaillierten Erforschung des Lötprozesses ohne Blei. Eine Lötverbindung muß den Strom gut führen und die Wärme gut ableiten. In Metz haben wir die elektrische Leitfähigkeit, die thermoelektrische Kraft und das Wärmeleitvermögen bestimmt für verschiedene bleilose Lote (Sn-Ag-Cu, Sn-Cu, Sn-Ag, Sn-Sb), sowohl im flüssigen als auch festen Zustand. Die Ergebnisse wurden mit dem klassischen bleihaltigen Lötzinn (Sn-Pb) verglichen. In Chemnitz haben wir die Oberflächen- und Grenzflächenspannung und die Dichte bleifreier Lote gemessen. Ebenfalls wurde die Viskosität dieser Lote ohne und mit Zusätzen (insbesondere Nickel) gemessen. Diese Eigenschaften wurden in Beziehung gesetzt zu den industriellen Problemen der Benetzbarkeit und des Fließverhaltens. Schließlich haben wir Legierungen unter verschiedenen Bedingungen verfestigt. Wir haben Unterkühlung beobachtet. Wir haben eine Technik entwickelt, basierend auf einer Mischung von Lot mit Pulver. Durch "Einsäen" von Nanokristallen in das flüssige Bad erhielten wir "verschiedene" Festkörper, die mit optischer und Elektronenmikroskopie untersucht wurden.
|
8 |
Variable-Density Flow Processes in Porous Media On Small, Medium and Regional ScalesWalther, Marc 03 November 2014 (has links) (PDF)
Nowadays society strongly depends on its available resources and the long term stability of the surrounding ecosystem. Numerical modelling has become a general standard for evaluating past, current or future system states for a large number of applications supporting decision makers in proper management. In order to ensure the correct representation of the investigated processes and results of a simulation, verification examples (benchmarks), that are based on observation data or analytical solutions, are utilized to evaluate the numerical modelling tool.
In many parts of the world, groundwater is an important resource for freshwater. While it is not only limited in quantity, subsurface water bodies are often in danger of contamination from various natural or anthropogenic sources. Especially in arid regions, marine saltwater intrusion poses a major threat to groundwater aquifers which mostly are the exclusive source of freshwater in these dry climates. In contrast to common numerical groundwater modelling, density-driven flow and mass transport have to be considered as vital processes in the system and in scenario simulations for fresh-saltwater interactions.
In the beginning of this thesis, the capabilities of the modelling tool OpenGeoSys are verified with selected benchmarks to represent the relevant non-linear process coupling. Afterwards, variable-density application and process studies on different scales are presented. Application studies comprehend regional groundwater modelling of a coastal aquifer system extensively used for agricultural irrigation, as well as hydro-geological model development and parametrization. In two process studies, firstly, a novel method to model gelation of a solute in porous media is developed and verified on small scale laboratory observation data, and secondly, investigations of thermohaline double-diffusive Rayleigh regimes on medium scale are carried out.
With the growing world population and, thus, increasing pressure on non-renewable resources, intelligent management strategies intensify demand for potent simulation tools and development of novel methods. In that way, this thesis highlights not only OpenGeoSys’ potential of density-dependent process modelling, but the comprehensive importance of variable-density flow and transport processes connecting, both, avant-garde scientific research, and real-world application challenges.
|
9 |
Variable-Density Flow Processes in Porous Media On Small, Medium and Regional ScalesWalther, Marc 07 May 2014 (has links)
Nowadays society strongly depends on its available resources and the long term stability of the surrounding ecosystem. Numerical modelling has become a general standard for evaluating past, current or future system states for a large number of applications supporting decision makers in proper management. In order to ensure the correct representation of the investigated processes and results of a simulation, verification examples (benchmarks), that are based on observation data or analytical solutions, are utilized to evaluate the numerical modelling tool.
In many parts of the world, groundwater is an important resource for freshwater. While it is not only limited in quantity, subsurface water bodies are often in danger of contamination from various natural or anthropogenic sources. Especially in arid regions, marine saltwater intrusion poses a major threat to groundwater aquifers which mostly are the exclusive source of freshwater in these dry climates. In contrast to common numerical groundwater modelling, density-driven flow and mass transport have to be considered as vital processes in the system and in scenario simulations for fresh-saltwater interactions.
In the beginning of this thesis, the capabilities of the modelling tool OpenGeoSys are verified with selected benchmarks to represent the relevant non-linear process coupling. Afterwards, variable-density application and process studies on different scales are presented. Application studies comprehend regional groundwater modelling of a coastal aquifer system extensively used for agricultural irrigation, as well as hydro-geological model development and parametrization. In two process studies, firstly, a novel method to model gelation of a solute in porous media is developed and verified on small scale laboratory observation data, and secondly, investigations of thermohaline double-diffusive Rayleigh regimes on medium scale are carried out.
With the growing world population and, thus, increasing pressure on non-renewable resources, intelligent management strategies intensify demand for potent simulation tools and development of novel methods. In that way, this thesis highlights not only OpenGeoSys’ potential of density-dependent process modelling, but the comprehensive importance of variable-density flow and transport processes connecting, both, avant-garde scientific research, and real-world application challenges.:Abstract
Zusammenfassung
Nomenclature
List of Figures
List of Tables
I Background and Fundamentals
1 Introduction
1.1 Motivation
1.2 Structure of the Thesis
1.3 Variable-Density Flow in Literature
2 Theory and Methods
2.1 Governing Equations
2.2 Fluid Properties
2.3 Modelling and Visualization Tools
3 Benchmarks
3.1 Steady-state Unconfined Groundwater Table
3.2 Theis Transient Pumping Test
3.3 Transient Saltwater Intrusion
3.4 Development of a Freshwater Lens
II Applications
4 Extended Inverse Distance Weighting Interpolation
4.1 Motivation
4.2 Extension of IDW Method
4.3 Artificial Test and Regional Scale Application
4.4 Summary and Conclusions
5 Modelling Transient Saltwater Intrusion
5.1 Background and Motivation
5.2 Methods and Model Setup
5.3 Simulation Results and Discussion
5.4 Summary, Conclusion and Outlook
6 Gelation of a Dense Fluid
6.1 Motivation
6.2 Methods and Model Setup
6.3 Results and Conclusions
7 Delineating Double-Diffusive Rayleigh Regimes
7.1 Background and Motivation
7.2 Methods and Model Setup
7.3 Results
7.4 Conclusions and Outlook
III Summary and Conclusions
8 Important Achievements
9 Conclusions and Outlook
Bibliography
Publications
Acknowledgements
Appendix
|
Page generated in 0.0424 seconds