Les fortes capacités actuelles et envisagées des futurs liens satellites de communication pour la 5G conduisent les signaux traités dans les charges utiles à présenter simultanément d'importantes variations d'amplitude (PAPR>10dB) et de très larges bandes passantes instantanées (BW>1GHz). A l'intérieur du sous-système d'émission hyperfréquence, le fonctionnement du module d'amplification de puissance se trouve très contraint par les formes d'ondes véhiculées, il se présente comme l'un des postes de consommation énergétique des plus importants, et ayant le plus d'impact sur l'intégrité du signal émis. Dans ce contexte, les fonctions dédiées au traitement numérique des signaux et couramment implémentées par le processeur numérique (telles que le filtrage, la canalisation, et éventuellement la démodulation et la régénération des signaux bande de base) embarquées dans les charges utiles, représentent une solution à fort potentiel qui permettrait de relâcher les contraintes reportées sur la fonction d'amplification de puissance afin de gérer au mieux la ressource électrique allouée. Ces travaux de thèse proposent d'étudier les potentialités d'amélioration du fonctionnement en rendement et linéarité d'un amplificateur de type Doherty à double entrée de gamme 20W en technologie GaN et fonctionnant en bande C. La combinaison des signaux de puissance sur la charge RF est optimisée par une distribution optimale des signaux en amplitude et phase à l'entrée par des moyens numériques de génération. Dans un premier temps une méthodologie de conception large bande d'un amplificateur Doherty est introduite et validée par la conception d'un démonstrateur en bande C. Dans un second temps, l'outil expérimental permettant l'extraction des lois optimales de distribution d'amplitude et de phase RF est présenté en détail, et la caractérisation expérimentale du dispositif en double entrée est réalisée puis comparée aux simulations. Finalement, en perspective à ces travaux, une étude préliminaire des potentialités de l'architecture Doherty à double entrée pour la gestion d’une désadaptation de la charge de sortie (gestion de TOS) est menée et des résultats sont mis en avant. / The high capabilities of current and future 5G communication satellite links lead the processed signals in the payloads to simultaneously exhibit large amplitude variations (PAPR>10dB) and wide instantaneous bandwidths (BW>1GHz). Within the microwave transmission subsystem, the operation of the power amplification stage is highly constrained by the transmitted waveforms, it is one of the most energy-consuming module of the payload affecting as well the integrity of the transmitted signal. In this context, the functions dedicated to digital signal processing and currently implemented by the digital processor (such as filtering, channeling, and possibly the demodulation and regeneration of baseband signals) embedded in the payloads, represent a potential solution that would reduce the constraints reported on the power amplification function and help to manage the allocated power ressource. This work proposes a study on the capability of dual input power amplifier architectures in order to manage the efficiency-linearity trade-off over a wide bandwidth. This study is carried out on a 20W GaN Doherty demonstrator operating in C band. The combination of the output signals on the RF load is managed by an optimal amplitude and phase distribution that is digitally controlled at the input. Firstly, a wideband design methodology of Doherty amplifier is introduced and validated on a C band demonstrator. In a second time the experimental tool allowing the extraction of amplitude and phase input distributions is presented, the dual input characterization is achieved and compared with simulation results. Finally, in perspective of this work, a preliminary study of the capabilities of the digital Doherty for the management of an output load mismatch (VSWR management) is carried out and the results are put forward.

ITC/USA 2005 Conference Proceedings / The Forty-First Annual International Telemetering Conference and Technical Exhibition / October 24-27, 2005 / Riviera Hotel & Convention Center, Las Vegas, Nevada / A conventionally designed radio frequency amplifier operated in its linear region exhibits low DC to RF conversion efficiency. Typically, for a power amplifier designed for digital modulation applications, the amplifier is operated “backed-off” from its P1dB point by a factor of 10 or -10 dB. The typical linear amplifier is biased for either Class A or Class A/B operation depending on the acceptable design trade-offs between efficiency and linearity between these two methods. A novel design approach to increasing the efficiency of a linear RF power amplifier using a modified Odd-Way Doherty technique is presented in this paper. The design was simulated, built and then tested. The design yields improvements in efficiency and linearity.

In today's digital world, information and communication technology accounts for 3% and 2% of the global power consumption and CO2 emissions respectively. This alarming figure is on an upward trend, as future telecommunications systems and handsets will become even more power hungry since new services with higher bandwidth requirements emerge as part of the so called 'future internet' paradigm. In addition, the mobile handset industry is tightly coupled to the consumer need for more sophisticated handsets with greater battery lifetime. If we cannot make any significant step to reducing the energy gap between the power hungry requirements of future handsets, and what battery technology can deliver, then market penetration for 4G handsets can be at risk. Therefore, energy conservation must be a design objective at the forefront of any system design from the network layer, to the physical and the microelectronic counterparts. In fact, the energy distribution of a handset device is dominated by the energy consumption of the RF hardware, and in particular the power amplifier design. Power amplifier design is a traditional topic that addresses the design challenge of how to obtain a trade-off between linearity and efficiency in order to avoid the introduction of signal distortion, whilst making best use of the available power resources for amplification. However, the present work goes beyond this by investigating a new line of amplifiers that address the green initiatives, namely green power amplifiers. This research work explores how to use the Doherty technique to promote efficiency enhancement and thus energy saving. Five different topologies of RF power amplifiers have been designed with custom-made signal splitters. The design core of the Doherty technique is based on the combination of a class B, class AB and a class C power amplifier working in synergy; which includes 90-degree 2-way power splitter at the input, quarter wavelength transformer at the output, and a new output power combiner. The frequency range for the amplifiers was designed to operate in the 3.4 - 3.6 GHz frequency band of Europe mobile WiMAX. The experimental results show that 30dBm output power can be achieved with 67% power added efficiency (PAE) for the user terminal, and 45dBm with 66% power added efficiency (PAE) for base stations which marks a 14% and 11% respective improvement over current stateof- the-art, while meeting the power output requirements for mobile WiMAX applications.

The signals of the new communication standards (LTE) show a great difference between the peak and its average power (PAPR) being unsuitable for use with conventional power amplifiers because they present maximum efficiency only when working with maximum power. Doherty power amplifiers for presenting a constant efficiency for a wide power range represent a favorable solution to this problem. This work presents the design methodology and measurements results of a fully integrated Doherty Power Amplifier in 65 nm CMOS technology with constant PAE over a 7 dB backoff. Measurements from 2.4 GHz to 2.6 GHz show constant PAE performance starting in 20% level up to 24% with a maximum output power of 23.4 dBm.The circuit was designed with special attention to low cost.

Les communications futures pour les applications civiles et militaires utilisent des signaux modulés complexes large bande qui seront émis à travers des amplificateurs de puissance multivoie de type DOHERTY qui devront avoir des performances en puissance, rendement, OBO et largeur de bande qui constituent aujourd’hui un véritable défi à relever. Pour ce faire les concepteurs ont besoin d’outils de caractérisation temporelle permettant la mesure normalisées et l’optimisation des tensions et courants aux accès des dispositifs non linéaires sous pointes ou connectorisés. Ce travail de thèse a permis de mettre en œuvre cet outil de caractérisation temporelle qui a été utilisé pour répondre à des besoins spécifiques pour la modélisation de transistor, pour l’optimisation de leur fonctionnement en termes de stabilité impulsion à impulsion, pour la recherche des conditions optimales de leur fonctionnement dans un amplificateur de type Doherty. Pour cette mise en œuvre une modélisation mathématique des échantillonneurs a été réalisée pour évaluer leurs performances et choisir le mieux adapté à la mesure temporelle RF. Des procédures d’étalonnages rigoureuses ont été développées pour obtenir simultanément des formes d’ondes temporelles calibrées à spectre très large (Basse fréquences jusqu’aux Hyperfréquences). / The future communications for civil and military applications will use complex wideband modulated signals to be transmitted through multi-channel DOHERTY power amplifiers which should have high performance in terms of power, efficiency, OBO, and bandwidth. In order to meet these stringent requirements, designers need time-domain characterization tools for calibrated measurements and for optimizing voltages and currents at both ports of non-linear connectorized or on-wafer devices. This work successfully implements time-domain characterization tools used to meet specific needs for transistor modeling, to optimize their operation in terms of pulse to pulse stability, and to search optimal conditions of their operation modes in a Doherty power amplifier. For this implementation, mathematical modeling is performed to evaluate sampler’s performances in terms of time-domain sampling efficiency in order to choose the best suited sampling architecture for RF time-domain measurements. Rigorous calibration procedures have been developed to obtain simultaneously full time-domain calibrated waveforms (from low Frequencies to Microwave frequencies).

Next generation mobile communication systems require the use of linear RF power amplifier for higher data transmission rates. However, linear RF power amplifiers are inherently inefficient and usually require additional circuits or further system adjustments for better efficiency. This dissertation focuses on the development of new efficiency enhancement schemes for linear RF power amplifiers. The multistage Doherty amplifier technique is proposed to improve the performance of linear RF power amplifiers operated in a low power level. This technique advances the original Doherty amplifier scheme by improving the efficiency at much lower power level. The proposed technique is supported by a new approach in device periphery calculation to reduce AM/AM distortion and a further improvement of linearity by the bias adaptation concept. The device periphery adjustment technique for efficiency enhancement of power amplifier integrated circuits is also proposed in this work. The concept is clearly explained together with its implementation on CMOS and SiGe RF power amplifier designs. Furthermore, linearity improvement technique using the cancellation of nonlinear terms is proposed for the CMOS power amplifier in combination with the efficiency enhancement technique. In addition to the efficiency enhancement of power amplifiers, a scalable large-signal MOSFET model using the modified BSIM3v3 approach is proposed. A new scalable substrate network model is developed to enhance the accuracy of the BSIM3v3 model in RF and microwave applications. The proposed model simplifies the modeling of substrate coupling effects in MOS transistor and provides great accuracy in both small-signal and large-signal performances.

Over the last decade, the number of mobile wireless devices on the market has increased substantially. New “multi-carrier” modulation schemes, such as OFDM, WCDMA, and WiMAX, have been developed to accommodate the increasing number of wireless subscribers and the demand for faster data rates within the limited commercial frequency spectrum. These complex modulation schemes create signals with high peak-to-average power ratios (PAPR), exhibiting rapid changes in the signal magnitude. To accommodate these high-PAPR signals, RF power amplifiers in mobile devices must operate under backed-off gain conditions, resulting in poor power efficiency. Various efficiency-enhancement solutions have been realized for backed-off devices to combat this issue. A brief overview of one of the more extensively researched solutions, the Doherty amplifier, is given, and its inherent limitations are discussed. A recently proposed amplifier topology that provides the efficiency benefits of the Doherty amplifier, while overcoming some of the fundamental problems that plague the standard Doherty architecture, is investigated. A step-by-step design methodology is presented and confirmed by extensive simulation in Agilent ADS. A design example, tuned for maximum efficiency at peak output power, is implemented on a PCB and tested to verify the validity of the proposed circuit configuration.

No description available.

Multi-standard RF front-end is a critical part of legacy and future emerging mobile architectures, where the size, the efficiency, and the integration of the elements in the RF front-end will affect the network key performance indicators (KPIs). This chapter discusses power amplifier design for both handset and base station applications for 5G and beyond. Also, this chapter deals with filter-antenna design for 5G applications that include a synthesis-based approach, differentially driven reconfigurable planar filter-antenna, and an insensitive phased array antenna with air-filled slot-loop resonators.