Spelling suggestions: "subject:"multiinjection"" "subject:"earlyinjection""
81 |
Metodologia de injeção de falhas baseada em emulação de processadores / Fault injection methodology based on processor emulationGeissler, Filipe de Aguiar January 2014 (has links)
Esta dissertação tem por finalidade apresentar uma metodologia de injeção de falhas baseada em emulação de processadores. Os efeitos causados pela radiação em processadores, operando no espaço ou em altitudes elevadas, têm sido estudados na literatura para o desenvolvimento de mecanismos de tolerância a falhas. Com a crescente popularidade do uso de processadores comerciais, (COTS – do inglês, Commercial Off-The-Shelf), em aplicações críticas, uma série de preocupações tem surgido devido a falta de confiabilidade apresentada por estes sistemas. Sendo desprovidos de mecanismos de tolerância para melhor robustez em ambientes espaciais, estes dispositivos comerciais são mais suscetíveis aos efeitos da radiação. Neste contexto, técnicas de tolerância a falhas baseadas em software vêm sendo estudadas a fim de aumentar a confiabilidade desta abordagem. Para a devida validação de tais mecanismos de tolerância, o uso de técnicas de injeção de falhas é aplicável. Estas técnicas de injeção de falhas possuem uma série de limitações que podem inviabilizar a sua aplicabilidade, dependendo da abordagem utilizada. Fatores como custo, indisponibilidade da descrição de hardware – utilizada em técnicas de injeção de falhas por simulação ou emulação em FPGA (Field Programmable Gate Array), e o longo tempo necessário para execução dos experimentos, são alguns exemplos de limitações das técnicas disponíveis. Com base nisso, a metodologia de injeção de falhas alternativa apresentada neste trabalho, visa reduzir as limitações presentes nas mais diversas técnicas. Baseada na utilização de tradução dinâmica de instruções, para acelerar o processo de execução de aplicações em emuladores, a metodologia apresenta um modelo de falhas para efeitos transientes e permanentes, aplicáveis neste cenário. Como método de classificação dos efeitos observados neste processo, um modelo presente na literatura foi utilizado. Para validação desta metodologia, um injetor de falhas baseado no emulador QEMU foi desenvolvido. Posteriormente, um estudo de caso com o injetor de falhas foi realizado para três estruturas de software distintas executando individualmente no processador MIPS 24kc, representando três níveis de complexidade distintos: sistema operacional Linux, sistema de tempo real, (RTEMS – do inglês, Real-Time Operating System), e uma aplicação dedicada. Cada sistema foi submetido a uma campanha de injeção de falhas transientes para emulação de efeitos singulares (SEU – do inglês, Single Event Upset). Como alvo de falhas, foram selecionados os registradores do processador e a memória de dados. Por fim, as análises obtidas através dos experimentos mostraram os diferentes efeitos observados para os três níveis de complexidade dos softwares executados. Além disso, se pôde avaliar o desempenho do injetor de falhas, disponibilizando ao final do trabalho uma ferramenta para o auxílio no desenvolvimento de técnicas de tolerância a falhas por software. / This dissertation aims to present a fault injection methodology based on microprocessor emulation. The effects caused by radiation in microprocessors, operating in space or at high altitudes, have been studied in the literature for the development of fault tolerance mechanisms. With the growing popularity of COTS (Commercial Off-The-Shelf) processors usage, in critical applications, a number of concerns have arisen due to the lack of reliability, presented in these systems. Due to the lack of fault tolerance mechanisms, these COTS devices are more susceptible to radiation effects. In this context, software-based fault tolerance techniques have been studied in the literature in order to increase the reliability of this approach. To validate such fault tolerance mechanisms, the use of fault injection techniques is applicable. These fault injection techniques have several limitations which can preclude their applicability, depending on of its design approach. Factor such as cost, unavailability of hardware description – used by fault injection techniques based on simulation or emulation with FPGA (Field Programmable Gate Array), and the long time demanded to execute experiments, are some examples of limitations in the available techniques. Based on this, the alternative fault injection methodology presented in this work aims to reduce these limitations. Based on the dynamic translation of instructions usage to accelerate the execution of application on emulators, the methodology presents a fault model for transient and permanent faults applicable in this scenario. As a classification method of the observed effects in this process, a model in the literature has been used. To validate this methodology, a fault injector based on the QEMU emulator was implemented. Later, a case study with the fault injector was performed for three software structures running at a time on a MIPS 24kc processor, representing three different levels of complexity: Linux operating system, RTEMS (Real-Time Operating System), and a dedicated application. Each system was submitted to a fault injection campaign emulating Single Event Upsets (SEUs). As fault targets it was selected the processor registers and the data memory. Finally, the analysis obtained with the experiments showed the different effects observed for the three levels of complexity. Besides that, the fault injector performance could be evaluated providing in the end a tool to help in the development of software-based fault injection techniques.
|
82 |
Técnicas de testes aplicadas a software embarcado em redes ópticas / Tests techniques applied to embedded software in optical networksFadel, Aline Cristine, 1984- 19 August 2018 (has links)
Orientadores: Regina Lúcia de Oliveira Moraes, Eliane Martins / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Tecnologia / Made available in DSpace on 2018-08-19T14:09:37Z (GMT). No. of bitstreams: 1
Fadel_AlineCristine_M.pdf: 3259764 bytes, checksum: a287ca33254d027f23e2f2f818464ee1 (MD5)
Previous issue date: 2011 / Resumo: Esse trabalho apresenta os detalhes e os resultados de testes automatizados e manuais que utilizaram a técnica de injeção de falhas e que foram aplicados em redes ópticas. No primeiro experimento o teste foi automatizado e utilizou a emulação de falhas físicas baseadas na máquina de estados do software embarcado dessa rede. Para esse teste foi utilizado uma chave óptica que é controlada por um robô de testes. O segundo experimento foi um teste manual, que injetou falhas nas mensagens de comunicação do protocolo dessa rede, a fim de validar os mecanismos de tolerância a falhas do software central dessa rede. Esse experimento utilizou a metodologia Conformance and Fault injection para preparar, executar e relatar os resultados dos casos de testes. Nos dois experimentos também foi utilizado um padrão de documentação de testes que visa facilitar a reprodução dos testes, a fim de que eles possam ser aplicados em outros ambientes. Com a aplicação desses testes, a rede óptica pode alcançar uma maior confiabilidade, disponibilidade e robustez, que são características essenciais para sistemas que requerem alta dependabilidade / Abstract: This work presents the details and the results of automatic and manual tests that used the fault injection technique and were applied on GPON network. In the first experiment the test was automated, and it performed the emulation of physical faults based on the state machine of the embedded software in this network. In this test is used an optical switch that is controlled by a test robot. The second experiment was a manual test, which injected faults on protocol communication message exchanged through the optical network, in order to validate the main software fault tolerance mechanisms. This experiment used a Conformance and Fault injection methodology to prepare, execute and report the results of the test cases. In both experiments, it was used a standard test documentation to facilitate the reproduction of the tests, so that they can be applied in other environments. With applying both tests, the optical networks reach greater reliability, availability and robustness. These attributes are essential for systems that require high dependability / Mestrado / Tecnologia e Inovação / Mestre em Tecnologia
|
83 |
New Fault Detection, Mitigation and Injection Strategies for Current and Forthcoming Challenges of HW Embedded DesignsEspinosa García, Jaime 03 November 2016 (has links)
[EN] Relevance of electronics towards safety of common devices has only been growing, as an ever growing stake of the functionality is assigned to them. But of course, this comes along the constant need for higher performances to fulfill such functionality requirements, while keeping power and budget low. In this scenario, industry is struggling to provide a technology which meets all the performance, power and price specifications, at the cost of an increased vulnerability to several types of known faults or the appearance of new ones.
To provide a solution for the new and growing faults in the systems, designers have been using traditional techniques from safety-critical applications, which offer in general suboptimal results. In fact, modern embedded architectures offer the possibility of optimizing the dependability properties by enabling the interaction of hardware, firmware and software levels in the process. However, that point is not yet successfully achieved. Advances in every level towards that direction are much needed if flexible, robust, resilient and cost effective fault tolerance is desired. The work presented here focuses on the hardware level, with the background consideration of a potential integration into a holistic approach.
The efforts in this thesis have focused several issues: (i) to introduce additional fault models as required for adequate representativity of physical effects blooming in modern manufacturing technologies, (ii) to provide tools and methods to efficiently inject both the proposed models and classical ones, (iii) to analyze the optimum method for assessing the robustness of the systems by using extensive fault injection and later correlation with higher level layers in an effort to cut development time and cost, (iv) to provide new detection methodologies to cope with challenges modeled by proposed fault models, (v) to propose mitigation strategies focused towards tackling such new threat scenarios and (vi) to devise an automated methodology for the deployment of many fault tolerance mechanisms in a systematic robust way.
The outcomes of the thesis constitute a suite of tools and methods to help the designer of critical systems in his task to develop robust, validated, and on-time designs tailored to his application. / [ES] La relevancia que la electrónica adquiere en la seguridad de los productos ha crecido inexorablemente, puesto que cada vez ésta copa una mayor influencia en la funcionalidad de los mismos. Pero, por supuesto, este hecho viene acompañado de una necesidad constante de mayores prestaciones para cumplir con los requerimientos funcionales, al tiempo que se mantienen los costes y el consumo en unos niveles reducidos. En este escenario, la industria está realizando esfuerzos para proveer una tecnología que cumpla con todas las especificaciones de potencia, consumo y precio, a costa de un incremento en la vulnerabilidad a múltiples tipos de fallos conocidos o la introducción de nuevos.
Para ofrecer una solución a los fallos nuevos y crecientes en los sistemas, los diseñadores han recurrido a técnicas tradicionalmente asociadas a sistemas críticos para la seguridad, que ofrecen en general resultados sub-óptimos. De hecho, las arquitecturas empotradas modernas ofrecen la posibilidad de optimizar las propiedades de confiabilidad al habilitar la interacción de los niveles de hardware, firmware y software en el proceso. No obstante, ese punto no está resulto todavía. Se necesitan avances en todos los niveles en la mencionada dirección para poder alcanzar los objetivos de una tolerancia a fallos flexible, robusta, resiliente y a bajo coste. El trabajo presentado aquí se centra en el nivel de hardware, con la consideración de fondo de una potencial integración en una estrategia holística.
Los esfuerzos de esta tesis se han centrado en los siguientes aspectos: (i) la introducción de modelos de fallo adicionales requeridos para la representación adecuada de efectos físicos surgentes en las tecnologías de manufactura actuales, (ii) la provisión de herramientas y métodos para la inyección eficiente de los modelos propuestos y de los clásicos, (iii) el análisis del método óptimo para estudiar la robustez de sistemas mediante el uso de inyección de fallos extensiva, y la posterior correlación con capas de más alto nivel en un esfuerzo por recortar el tiempo y coste de desarrollo, (iv) la provisión de nuevos métodos de detección para cubrir los retos planteados por los modelos de fallo propuestos, (v) la propuesta de estrategias de mitigación enfocadas hacia el tratamiento de dichos escenarios de amenaza y (vi) la introducción de una metodología automatizada de despliegue de diversos mecanismos de tolerancia a fallos de forma robusta y sistemática.
Los resultados de la presente tesis constituyen un conjunto de herramientas y métodos para ayudar al diseñador de sistemas críticos en su tarea de desarrollo de diseños robustos, validados y en tiempo adaptados a su aplicación. / [CAT] La rellevància que l'electrònica adquireix en la seguretat dels productes ha crescut inexorablement, puix cada volta més aquesta abasta una major influència en la funcionalitat dels mateixos. Però, per descomptat, aquest fet ve acompanyat d'un constant necessitat de majors prestacions per acomplir els requeriments funcionals, mentre es mantenen els costos i consums en uns nivells reduïts. Donat aquest escenari, la indústria està fent esforços per proveir una tecnologia que complisca amb totes les especificacions de potència, consum i preu, tot a costa d'un increment en la vulnerabilitat a diversos tipus de fallades conegudes, i a la introducció de nous tipus.
Per oferir una solució a les noves i creixents fallades als sistemes, els dissenyadors han recorregut a tècniques tradicionalment associades a sistemes crítics per a la seguretat, que en general oferixen resultats sub-òptims. De fet, les arquitectures empotrades modernes oferixen la possibilitat d'optimitzar les propietats de confiabilitat en habilitar la interacció dels nivells de hardware, firmware i software en el procés. Tot i això eixe punt no està resolt encara. Es necessiten avanços a tots els nivells en l'esmentada direcció per poder assolir els objectius d'una tolerància a fallades flexible, robusta, resilient i a baix cost. El treball ací presentat se centra en el nivell de hardware, amb la consideració de fons d'una potencial integració en una estratègia holística.
Els esforços d'esta tesi s'han centrat en els següents aspectes: (i) la introducció de models de fallada addicionals requerits per a la representació adequada d'efectes físics que apareixen en les tecnologies de fabricació actuals, (ii) la provisió de ferramentes i mètodes per a la injecció eficient del models proposats i dels clàssics, (iii) l'anàlisi del mètode òptim per estudiar la robustesa de sistemes mitjançant l'ús d'injecció de fallades extensiva, i la posterior correlació amb capes de més alt nivell en un esforç per retallar el temps i cost de desenvolupament, (iv) la provisió de nous mètodes de detecció per cobrir els reptes plantejats pels models de fallades proposats, (v) la proposta d'estratègies de mitigació enfocades cap al tractament dels esmentats escenaris d'amenaça i (vi) la introducció d'una metodologia automatitzada de desplegament de diversos mecanismes de tolerància a fallades de forma robusta i sistemàtica.
Els resultats de la present tesi constitueixen un conjunt de ferramentes i mètodes per ajudar el dissenyador de sistemes crítics en la seua tasca de desenvolupament de dissenys robustos, validats i a temps adaptats a la seua aplicació. / Espinosa García, J. (2016). New Fault Detection, Mitigation and Injection Strategies for Current and Forthcoming Challenges of HW Embedded Designs [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/73146 / TESIS
|
84 |
Nástroj pro testování odolnosti webových služeb / A Tool for Robustness Testing of Web-ServicesZelinka, Tomáš January 2013 (has links)
This project deals with testing of web services. The result of this work will be a tool for load testing of web services using fault injection in their communication. The first part of the project discusses the basic aspects of testing web services. The second part of the work is more focused on testing high loads in combination with fault injection. The tool will allow automated run of the tests. The distributed model of the tool was designed to simulate real loads. In the last chapter are summarized achieved results.
|
85 |
Compiler-Assisted Software Fault Tolerance for Bare Metal and RTOS Applications on Embedded PlatformsJames, Benjamin 13 April 2021 (has links)
In the presence of ionizing particles and other high-energy atomic sources, many electronic and computer systems fail. Single event upsets (SEUs) can be mitigated through hardware and/or software methods. Previous research at BYU has introduced COAST, a compiler-based tool that can automatically add software protection schemes to improve fault coverage of programs. This thesis will expand on the work already done with the COAST project by proving its effectiveness across multiple platforms and benchmarks. The ability to automatically add fault protection to arbitrary user programs will be very valuable for many application designers. The results presented herein show that mean work to failure (MWTF) of an application can increase from 1.2x – 36x when protected by COAST. In addition to the results based on bare metal applications, in this thesis we will show that it is both possible and profitable to protect a real-time operating system with COAST. We present experimental results which show that our protection scheme gives a 2x – 100x improvement in MWTF. We also present a fault injection framework that allows for rapid and reliable testing of multiple protection schemes across different benchmarks. The code setup used in this paper is publicly available. We make it public in the hope that it will be useful for others doing similar research to have a concrete starting point.
|
86 |
Sécurisation de programmes assembleur face aux attaques visant les processeurs embarqués / Security of assembly programs against fault attacks on embedded processorsMoro, Nicolas 13 November 2014 (has links)
Cette thèse s'intéresse à la sécurité des programmes embarqués face aux attaques par injection de fautes. La prolifération des composants embarqués et la simplicité de mise en œuvre des attaques rendent impérieuse l'élaboration de contre-mesures.Un modèle de fautes par l'expérimentation basé sur des attaques par impulsion électromagnétique a été élaboré. Les résultats expérimentaux ont montré que les fautes réalisées étaient dues à la corruption des transferts sur les bus entre la mémoire Flash et le pipeline du processeur. Ces fautes permettent de réaliser des remplacements ou des saut d'instructions ainsi que des modifications de données chargées depuis la mémoire Flash. Le remplacement d'une instruction par une autre bien spécifique est très difficile à contrôler ; par contre, le saut d'une instruction ciblée a été observé fréquemment, est plus facilement réalisable, et permet de nombreuses attaques simples. Une contre-mesure empêchant ces attaques par saut d'instruction, en remplaçant chaque instruction par une séquence d'instructions, a été construite et vérifiée formellement à l'aide d'outils de model-checking. Cette contre-mesure ne protège cependant pas les chargements de données depuis la mémoire Flash. Elle peut néanmoins être combinée avec une autre contre-mesure au niveau assembleur qui réalise une détection de fautes. Plusieurs expérimentations de ces contre-mesures ont été réalisées, sur des instructions isolées et sur des codes complexes issus d'une implémentation de FreeRTOS. La contre-mesure proposée se révèle être un très bon complément pour cette contre-mesure de détection et permet d'en corriger certains défauts. / This thesis focuses on the security of embedded programs against fault injection attacks. Due to the spreadings of embedded systems in our common life, development of countermeasures is important.First, a fault model based on practical experiments with a pulsed electromagnetic fault injection technique has been built. The experimental results show that the injected faults were due to the corruption of the bus transfers between the Flash memory and the processor’s pipeline. Such faults enable to perform instruction replacements, instruction skips or to corrupt some data transfers from the Flash memory.Although replacing an instruction with another very specific one is very difficult to control, skipping an instruction seems much easier to perform in practice and has been observed very frequently. Furthermore many simple attacks can carried out with an instruction skip. A countermeasure that prevents such instruction skip attacks has been designed and formally verified with model-checking tool. The countermeasure replaces each instruction by a sequence of instructions. However, this countermeasure does not protect the data loads from the Flash memory. To do this, it can be combined with another assembly-level countermeasure that performs a fault detection. A first experimental test of these two countermeasures has been achieved, both on isolated instructions and complex codes from a FreeRTOS implementation. The proposed countermeasure appears to be a good complement for this detection countermeasure and allows to correct some of its flaws.
|
87 |
From safety analysis to experimental validation by fault injection - Case of automotive embedded systems / Des analyses de sécurité à la validation expérimentale par injection de fautes - Le cas des systèmes embarqués automobilePintard, Ludovic 28 May 2015 (has links)
En raison de la complexité croissante des systèmes automobiles embarqués, la sûreté de fonctionnement est devenue un enjeu majeur de l’industrie automobile. Cet intérêt croissant s’est traduit par la sortie en 2011 de la norme ISO 26262 sur la sécurité fonctionnelle. Les défis auxquelles sont confrontés les acteurs du domaine sont donc les suivants : d’une part, la conception de systèmes sûrs, et d’autre part, la conformité aux exigences de la norme ISO 26262. Notre approche se base sur l’application systématique de l’injection de fautes pour la vérification et la validation des exigences de sécurité, tout au long du cycle de développement, des phases de conception jusqu’à l’implémentation. L’injection de fautes nous permet en particulier de vérifier que les mécanismes de tolérance aux fautes sont efficaces et que les exigences non-fonctionnelles sont respectées. L’injection de faute est une technique de vérification très ancienne. Cependant, son rôle lors de la phase de conception et ses complémentarités avec la validation expérimentale, méritent d’être étudiés. Notre approche s’appuie sur l’application du modèle FARM (Fautes, Activations, Relevés et Mesures) tout au long du processus de développement. Les analyses de sûreté sont le point de départ de notre approche, avec l'identification des mécanismes de tolérance aux fautes et des exigences non-fonctionnelles, et se terminent par la validation de ces mécanismes par les expériences classiques d'injection de fautes. Enfin, nous montrons que notre approche peut être intégrée dans le processus de développement des systèmes embarqués automobiles décrits dans la norme ISO 26262. Les contributions de la thèse sont illustrées sur l’étude de cas d’un système d’éclairage avant d’une automobile. / Due to the rising complexity of automotive Electric/Electronic embedded systems, Functional Safety becomes a main issue in the automotive industry. This issue has been formalized by the introduction of the ISO 26262 standard for functional safety in 2011. The challenges are, on the one hand to design safe systems based on a systematic verification and validation approach, and on the other hand, the fulfilment of the requirements of the ISO 26262 standard. Following ISO 26262 recommendations, our approach, based on fault injection, aims at verifying fault tolerance mechanisms and non-functional requirements at all steps of the development cycle, from early design phases down to implementation. Fault injection is a verification technique that has been investigated for a long time. However, the role of fault injection during design phase and its complementarities with the experimental validation of the target have not been explored. In this work, we investigate a fault injection continuum, from system design validation to experiments on implemented targets. The proposed approach considers the safety analyses as a starting point, with the identification of safety mechanisms and safety requirements, and goes down to the validation of the implementation of safety mechanisms through fault injection experiments. The whole approach is based on a key fault injection framework, called FARM (Fault, Activation, Readouts and Measures). We show that this approach can be integrated in the development process of the automotive embedded systems described in the ISO 26262 standard. Our approach is illustrated on an automotive case study: a Front-Light system.
|
88 |
Learning-based Testing for Automotive Embedded Systems : A requirements modeling and Fault injection studyKhosrowjerdi, Hojat January 2019 (has links)
This thesis concerns applications of learning-based testing (LBT) in the automotive domain. In this domain, LBT is an attractive testing solution, since it offers a highly automated technology to conduct safety critical requirements testing based on machine learning. Furthermore, as a black-box testing technique, LBT can manage the complexity of modern automotive software applications such as advanced driver assistance systems. Within the automotive domain, three relevant software testing questions for LBT are studied namely: effectiveness of requirements modeling, learning efficiency and error discovery capabilities. Besides traditional requirements testing, this thesis also considers fault injection testing starting from the perspective of automotive safety standards, such as ISO26262. For fault injection testing, a new methodology is developed based on the integration of LBT technologies with virtualized hardware emulation to implement both test case generation and fault injection. This represents a novel application of machine learning to fault injection testing. Our approach is flexible, non-intrusive and highly automated. It can therefore provide a complement to traditional fault injection methodologies such as hardware-based fault injection. / <p>QC 20190325</p>
|
89 |
A Deep Learning Approach to Side-Channel Analysis of Cryptographic HardwareRamezanpour, Keyvan 08 September 2020 (has links)
With increased growth of the Internet of Things (IoT) and physical exposure of devices to adversaries, a class of physical attacks called side-channel analysis (SCA) has emerged which compromises the security of systems. While security claims of cryptographic algorithms are based on the complexity of classical cryptanalysis attacks, they exclude information leakage by implementations on hardware platforms. Recent standardization processes require assessment of hardware security against SCA. In this dissertation, we study SCA based on deep learning techniques (DL-SCA) as a universal analysis toolbox for assessing the leakage of secret information by hardware implementations. We demonstrate that DL-SCA techniques provide a trade-off between the amount of prior knowledge of a hardware implementation and the amount of measurements required to identify the secret key. A DL-SCA based on supervised learning requires a training set, including information about the details of the hardware implementation, for a successful attack. Supervised learning has been widely used in power analysis (PA) to recover the secret key with a limited size of measurements. We demonstrate a similar trend in fault injection analysis (FIA) by introducing fault intensity map analysis with a neural network key distinguisher (FIMA-NN). We use dynamic timing simulations on an ASIC implementation of AES to develop a statistical model for biased fault injection. We employ the model to train a convolutional neural network (CNN) key distinguisher that achieves a superior efficiency, nearly $10times$, compared to classical FIA techniques. When a priori knowledge of the details of hardware implementations is limited, we propose DL-SCA techniques based on unsupervised learning, called SCAUL, to extract the secret information from measurements without requiring a training set. We further demonstrate the application of reinforcement learning by introducing the SCARL attack, to estimate a proper model for the leakage of secret data in a self-supervised approach. We demonstrate the success of SCAUL and SCARL attacks using power measurements from FPGA implementations of the AES and Ascon authenticated ciphers, respectively, to recover entire 128-bit secret keys without using any prior knowledge or training data. / Doctor of Philosophy / With the growth of the Internet of Things (IoT) and mobile devices, cryptographic algorithms have become essential components of end-to-end cybersecurity. A cryptographic algorithm is a highly nonlinear mathematical function which often requires a secret key. Only the user who knows the secret key is able to interpret the output of the algorithm to find the encoded information. Standardized algorithms are usually secure against attacks in which in attacker attempts to find the secret key given a set of input data and the corresponding outputs of the algorithm. The security of algorithms is defined based on the complexity of known cryptanalysis attacks to recover the secret key. However, a device executing a cryptographic algorithm leaks information about the secret key. Several studies have shown that the behavior of a device, such as power consumption, electromagnetic radiation and the response to external stimulation provide additional information to an attacker that can be exploited to find the secret key with much less effort than cryptanalysis attacks. Hence, exposure of devices to adversaries has enabled the class of physical attacks called side-channel analysis (SCA). In SCA, an attacker attempts to find the secret key by observing the behavior of the device executing the algorithm. Recent government and industry standardization processes, which choose future cryptographic algorithms, require assessing the security of hardware implementations against SCA in addition to the algorithmic level security of the cryptographic systems. The difficulty of an SCA attack depends on the details of a hardware implementation and the form of information leakage on a particular device. The diversity of possible hardware implementations and platforms, including application specific integrated circuits (ASIC), field programmable gate arrays (FPGA) and microprocessors, has hindered the development of a unified measure of complexity in SCA attacks. In this research, we study SCA with deep learning techniques (DL-SCA) as a universal methodology to evaluate the leakage of secret information by hardware platforms. We demonstrate that DL-SCA based on supervised learning can be considered as a generalization of classical SCA techniques, and is able to find the secret information with a limited size of measurements. However, supervised learning techniques require a training set of data that includes information about the details of hardware implementation. We propose unsupervised learning techniques that are able to find the secret key even without knowledge of the details of the hardware. We further demonstrate the ability of reinforcement learning in estimating a proper model for data leakage in a self-supervised approach. We demonstrate that DL-SCA techniques are able to find the secret information even if the timing of data leakage in measurements are random. Hence, traditional countermeasures are unable to protect a hardware implementation against DL-SCA attacks. We propose a unified countermeasure to protect the hardware implementations against a wide range of SCA attacks.
|
90 |
Anomaly Detection for Monocular Camera-based Distance Estimation in Autonomous Driving / Avvikelsedetektion för monokulär kamerabaserad distanssuppskattning vid autonom körningGe, Muchen January 2024 (has links)
With the development of Autonomous Driving (AD) technology, there is a growing concern over the safety of the technology. Finding methods to improve the reliability of this technology becomes a current challenge. The AD system is composed of a perception module, a planning module, and a control module. The perception module, which provides information about the environment for the whole system, is a critical part of the AD system. This project aims to provide a better understanding of the functionality and reliability of the perception module of an AD system. In this project, a simple model of the perception module is built with YOLOv5-nano for object detection, StrongSORT for object tracking, and MonoDepth2 for depth estimation. The system takes images from a single camera as input and produces a time series of distance to the preceding vehicle. Fault injection technologies are utilized for testing the reliability of the system. Different faults, including weather factors, sensor faults, and encoder faults, are injected. The system behaviors under faults are observed and analyzed. Then multiple methods for anomaly detection are applied to the time series of distance data, including the statistic method ARIMA, and the machine learning methods MLP and LSTM. Comparisons are made among the anomaly detection methods, based on the efficiency and performance. The dataset in this project is generated by the CARLA simulator. / Med utvecklingen av tekniken för autonom körning (AD) växer oro över teknologins säkerhet. Att hitta metoder för att förbättra tillförlitligheten hos denna teknologi blir en aktuell utmaning. AD-systemet består av en perceptionsmodul, en planeringsmodul och en styrmodul. Perceptionsmodulen, som tillhandahåller information om miljön för hela systemet, är en kritisk del av AD-systemet. Detta projekt syftar till att ge en bättre förståelse för funktionaliteten och tillförlitligheten hos perceptionsmodulen i ett AD-system. I detta projekt byggs en enkel modell av perceptionsmodulen med YOLOv5-nano för objektdetektion, StrongSORT för objektföljning och MonoDepth2 för djupuppskattning. Systemet tar bilder från en enda kamera som inmatning och producerar en tidsserie av avståndet till det föregående fordonet. Felinjektionstekniker används för att testa systemets tillförlitlighet. Olika fel, inklusive väderfaktorer, sensorfel och maskininlärningsfel, injiceras. Systemets beteende under fel observeras och analyseras. Därefter tillämpas flera metoder för avvikelsedetektering på tidsserien av avstånd, inklusive statistikmetoden ARIMA samt maskininlärningsmetoderna MLP och LSTM. Jämförelser görs mellan avvikelsedetekteringsmetoderna, baserat på effektivitet och prestanda. Datamängden i detta projekt genereras av CARLAsimulatorn.
|
Page generated in 0.0547 seconds