Dans les réacteurs industriels ou dans la nature, l'écoulement de fluides peut être couplé à des réactions chimiques. Dans de nombreux cas, il en résulte l'apparition de structures complexes dont les propriétés dépendent entre autres de la géométrie du système.<p><p>Dans ce contexte, le but de notre thèse a été d'étudier de manière théorique et sur des modèles réaction-diffusion-convection simples les propriétés de dynamiques spatio-temporelles résultant du couplage chimie-hydrodynamique. <p>Nous nous sommes focalisés sur les instabilités hydrodynamiques de digitation visqueuse et de densité qui apparaissent respectivement lorsqu'un fluide dense est placé au-dessus d'un fluide moins dense dans le champ de gravité et lorsqu'un fluide visqueux est déplacé par un fluide moins visqueux dans un milieu poreux.<p><p>En particulier, nous avons étudié les problèmes suivants:<p>- L'influence d'une réaction chimique de type A + B → C sur la digitation visqueuse. Nous avons montré que les structures formées lors de cette instabilité varient selon que le réactif A est injecté dans le réactif B ou vice-versa si ces réactifs n'ont pas un coefficient de diffusion ou une concentration initiale identiques.<p>- Le rôle de pertes de chaleur par les parois du réacteur dans le cadre de la digitation de densité de fronts autocatalytiques exothermiques. Nous avons caractérisé les conditions de stabilité de fronts en fonction des pertes de chaleur et expliqué l'apparition de zones anormalement chaudes lors de cette instabilité.<p>- L'influence de l'inhomogénéité du milieu sur la digitation de densité de solutions réactives ou non. Nous avons montré que les variations spatiales de perméabilité d'un milieu poreux peuvent figer ou faire osciller la structure de digitation dans certaines conditions.<p>- L'influence d'un champ électrique transverse sur l'instabilité diffusive et la digitation de densité de fronts autocatalytiques. Il a été montré que cette interaction peut donner lieu à des nouvelles structures et changer les propriétés du front.<p><p>En conclusion, nous avons montré que le couplage entre réactions chimiques et mouvements hydrodynamiques est capable de générer de nouvelles structures spatio-temporelles dont les propriétés dépendent entre autres des conditions imposées au système.<p>/<p>In industrial reactors or in nature, fluid flows can be coupled to chemical reactions. In many cases, the result is the emergence of complex structures whose properties depend among others on the geometry of the system.<p>In this context, the purpose of our thesis was to study theoretically using simple models of reaction-diffusion-convection, the properties of dynamics resulting from the coupling between chemistry and hydrodynamics.<p><p>We focused on the hydrodynamic instabilities of viscous and density fingering that occur respectively when a dense fluid is placed above a less dense one in the gravity field and when a viscous fluid is displaced by a less viscous fluid in a porous medium.<p><p>In particular, we studied the following issues:<p>- The influence of a chemical reaction type A + B → C on viscous fingering. We have shown that the fingering patterns observed during this instability depends on whether the reactant A is injected into the reactant B or vice versa if they do not have identical diffusion coefficients or initial concentrations.<p>- The role of heat losses through the reactor walls on the density fingering of exothermic autocatalytic fronts. We have characterized the conditions of stability of fronts depending on heat losses and explained the appearance of unusually hot areas during this instability.<p>- The influence of the inhomogeneity of the medium on the density fingering of reactive solutions or not. We have shown that spatial variations of permeability of a porous medium may freeze or generate oscillating fingering pattern under certain conditions.<p>- The influence of a transverse electric field on the Rayleigh-Taylor and diffusive instabilities of autocatalytic fronts. It was shown that this interaction may lead to new structures and may change the properties of the front.<p><p>In conclusion, we showed that the coupling between chemical reactions and hydrodynamic motions can generate new space-time structures whose properties depend among others, on the conditions imposed on the system. / Doctorat en Sciences / info:eu-repo/semantics/nonPublished

This work is devoted to the design of a microclimate facility in a family house. The first part contains analysis of thermal losses before and after using thermal insulation. Based on this analysis, a heating system is proposed, including the necessary technical calculations for the operation of the system. As a heat source, a condensing boiler is selected. At the next point, the thesis focuses on the calculation of the heat gains in selected rooms in order to design a cooling device. A multisplit system is selected for cooling the rooms. In the next part the thesis deals with the design of forced ventilation of selected rooms. The ventilation system provides the necessary air exchange and covers heat losses through ventilation. At the end of the thesis is outlined the concept of regulation of individual systems and also the requirements for individual professions are described.

The import of the vegetable has prevailed in the long run over the own production. In connection with this reality and increasing demand for the food with higher quality the production greenhouse is more often built. The providing heat, cold and electricity for the year-round operation is related to the construction and working of these objects. The theoretical part of this theses describes possible ways how to cover energy consumption for the model greenhouse in Kožichovice, Třebíč region. The heat losses and the year-round heat consumption were stated for the selected model and compared with the exact values from Kožichovice. The following method of energy supply was selected based on the calculated energy consumption - the separate cogeneration unit, cooperation of several cogeneration units, a biogas station, a heat pump and central heating system. These methods of energy supply were subjected to technical and economical comparison.

Proposal for heating and water warming of rehabilitation centre. The first part of the project analyses given topic, the matter of calculating heat losses and heating elements proposal. It also deals with heat source for heating, fuel for boilers and condensation boilers functioning. The second part covers the technical design of the theme and the third part deals with the solar system.

This master thesis designes the calculation of fluid boiler with specific part - the circular fluid bed. The heat is given by combustion of wood biomass. The thesis is devided into several parts. All necessary elementary results are going to be reached within these parts: an analysis of solid fuel, stechiometry calculation, discussion on output limits and the environmental point of view, definition of elemental heat losses and general heat efficiency, calculation and design of a combustion part and its heat loads and calculation of enthalpies with different ash concentrations. All these phases get to a successful design of the fluid boiler heat balance and sizes of heat-flow surfaces. The composition of the boiler shows the added drawing.

The trend in today's civil engineering are growing demands for quality and comfort constructed buildings and spaces in them. This trend causes a change in the approach to designing buildings and building new buildings. One of the main directions great importance is attached dedicated reconstruction of buildings and their technical adjustments to meet the ever increasing demands being norms and laws. One of the most monitored parameters are thermal-technical characteristics of objects - i.e. better quality means saving on heating costs. In this connection there is a big trend of the modern construction industry and building insulation, mainly ETICS systems. Dissertation focuses on the basic (reinforced) layer of the ETICS and examines the effect of low temperatures, acting on the matter in the implementation of the system, the properties of this layer. This coating is one of the key elements of the system, which more or less determines the quality and durability of the system. The first part deals with the current state of the problem and generally insulation systems, basic types and the advantages and disadvantages of these systems. In the main part of the work is solution focused work, its objectives and methodology for testing materials using laboratory tests and are mentioned outputs of experiments in terms of results. The final section addresses the evaluation of the data and results and output for construction practice. The theme of work was also addressed in the specific research. The works are also numerical and graphical attachments to records of experiments and calculations.

The aim of this diploma thesis is to find a solution of heating system, a hot water preparation and a subsequent design of the heat source for the apartment building. The project consists of a calculation of heat losses, a design of radiators, a dimensioning of pipes and a design of two options of the heat source for heating and hot water preparation. The first option of the heat source I chose a pellet boiler and the second option is an electric boiler with solar collectors for the preparation of hot water. The introductory part deals with analysis of this object and emission limits of heat source using different fuels.

Actuellement, la plupart des fabricants de pompes à chaleur (PAC) fournissent les valeurs de coefficients de performances (COP) obtenus en laboratoire en conditions contrôlées et standardisées. Une méthode prometteuse, appelée méthode de mesure des performances dans la suite, d’évaluation des performances de PAC in situ, basée sur le bilan énergétique du compresseur, a été présentée par Tran et al. (2013). Cette méthode détermine le débit de fluide frigorigène et est compatible avec différents types de PAC, notamment air-air, et des cycles frigorifiques plus complexes.Tran et al. (2013) ont déterminé que l’incertitude sur l’évaluation de pertes thermiques du compresseur contribue à hauteur de 40% sur l’erreur d’estimation de la puissance thermique. L’objectif de cette thèse est d’établir une méthode simplifiée quant à l’instrumentation pour mesurer les pertes thermiques in situ. Pour cela, deux modèles numériques détaillés sont développés afin d’examiner la distribution de température sur l’enveloppe de deux types de compresseurs, scroll et rotary. Les mesures expérimentales fournies par un fabricant de compresseurs, Mitsubishi Heavy Industries (MHI), sont utilisées pour calibrer et valider les modèles numériques. Ces derniers permettent de définir deux protocoles de mesures différents pour les deux compresseurs. Ensuite, le protocole établi pour le compresseur rotary est intégré dans la méthode de mesures des performances. Les puissances thermiques calculées sont comparées avec des valeurs de référence, obtenues à partir d’un prototype en banc d’essai à EDF Lab Les Renardières. / Currently, most heat pump(HP) manufacturers provide coefficient of performance (COP) values obtained in laboratories under standardized controlled operating conditions. These COP values are not necessarily representative of those obtained on-field. A promising method, referred to as the performance assessment method, that measures heat pump performances in-situ based on compressor energy balance, was presented by Tran et al. (2013). The method determines refrigerant mass flow rate and has the capability of measuring performances of various HP types, such as air-to-air, as well as more complex refrigeration cycles. The method abstains from intrusive measurements, and is, therefore, perfectly suitable for in-situ measurements.As shown in the work of Tran et al. (2013), compressor heat losses account for 40% in the final uncertainty of performance values obtained with the performance assessment method. The objective of this thesis is to establish a rather simplified measurement method, in terms of instrumentation, that is used to determine compressor heat losses in-situ. For this purpose two detailed numerical models for assessing the temperature fields of the scroll and rotary compressor shells were developed. Experimental measurements obtained with the help of compressor manufacturer, Mitsubishi Heavy Industries (MHI), are used to validate and calibrate the numerical models. The developed numerical models allow to define two different measurement protocols for both compressors. Established compressor heat loss protocol for rotary compressor is then integrated in the performance assessment method and the obtained heating capacities are compared with reference measurements in an experimental test bench in EDF Lab Les Renardières.

The subject of this thesis is a design of a newly built guesthouse on a bicycle path in the village Spálené Poříčí. The building is designed in a gently sloping terrain towards the west. The main entrance faces the south. It is an object without a basement and with two above ground floors. The structure of the building is a transverse wall system made of ceramic fittings. Other walls are also made of ceramic fittings. The entire building is based upon the stripe foundations and footings. Pension is covered in the part of the accommodation and in the restaurant part with a gable roof. For the restaurant, a terrace is designed on the west side of the building. In this thesis, static and building equipments are solved. The building is also evaluated in the terms of lighting, thermal, acoustic requirements and the fire safety of building is also solved.

The main focus of this thesis is to design the expansion and modernization of a sport complex "U Jezu" for a sport club TJ Roztoky. This thesis is consisted of a study for a territorial agreement. In this study, there are indicated a formation of two playing fields with the artificial surfaces, beach volleyball court proposing two building objects as a base for the entire complex, which consists of garages, storages and a main building. A more detailed design was created for the main building. As the supporting structure of the object, the transverse wall system completed with outdoor columns supporting the cantilevered portion of the ceiling tiles, which are mainly unidirectionally reinforced concrete floor slabs. The supporting structure is based on the strip foundations. The designed building object has two-above ground floors and a ground floor, which will be created by embedding the building object into the hill side. The ground floor is designed for the relaxation and the leisure purposes. Moreover, there is also a technological equipment necessary for the operation of the facility. On the first above ground floor, there are designed locker rooms for athletes, a club room with a kitchen and an accommodation unit for a manager of the complex. The second floor is for the accommodation. There are designed rooms with lounge and office of the president of the sport club. Part of the second floor consists of a terrace. For the roofing, a flat roof with a single-classic sequence of layers is designed. In this thesis, the static is partially solved. Furthermore, the object is evaluated in the terms of lighting, acoustic and thermal requirements as well as requirements for the fire safety of buildings.