The making and breaking of O-O bonds has implications ranging from artificial photosynthesis and water oxidation to the use of O₂ as a selective, green oxidant for transformations of small molecules. Oxidative generation of O₂ from coupling of two H₂O molecules remains challenging, and well defined systems that catalytically evolve O₂ are exceedingly rare. Recent theoretical studies have invoked metal oxyl radicals (L[subscript n]M=O*) containing a singly occupied M-O π-type orbital as precursors to O-O bond forming events in both biological and synthetic water oxidation catalysts. However, the lack of stable metal oxyl complexes makes it difficult to explore and understand this hypothesis. The activation of dioxygen (breaking of O-O bonds) to produce terminal metal oxos also remains a challenge. There is an inherent kinetic barrier to the spin-forbidden reactions of triplet dioxygen, and features that engender selective O₂ reduction are not easily transferable from system to system. The primary thrust of this thesis work has been to elaborate new methods to generate well-defined metal oxyl radicals for studies of their reactions in radical bond-forming reactions similar to the radical coupling hypothesis of water oxidation. A library of >20 5- and 6-coordinate high-valent oxorhenium complexes containing redox-inert and redox-active ligands has been prepared. The complexes containing redox-active ligands have shown the ability for ligand-mediated radical coupling reactions. Mechanistic studies of bimetallic O₂ homolysis (the microscopic reverse of water oxidation) and nitroxyl radical deoxygenation at five-coordinate oxorhenium(V) reveal that, in both net 2e⁻ reactions, coupling to a redox-active ligand lowers the kinetic barrier to the reaction by facilitating formation and stabilization of 1e⁻ oxidized intermediates. Coordinatively unsaturated high-valent oxorhenium complexes containing redox-active ligands direct bond-forming reactions towards the metal center. This is undesirable towards the goal of forming O-O bonds. To address this problem coordinatively saturated Re(V) and Re(VII) complexes were prepared. Oxidation of these species by chemical oxidants allowed for the isolation of "masked" oxyl species. These complexes showed reactivity towards Si and trityl radicals to produce new Si-O and C-O bonds, whereas their closed-shell congeners were inert. We have successfully developed a method for the preparation and isolation of "masked" oxyl radicals and shown their utility in ligand-mediated radical coupling reactions.

Main group polycations and transition metal clusters had traditionally been synthesized via high-temperature routes by performing reactions in melts or by CTR, at room-temperature or lower temperature by using so-called superacid solvents, and at room-temperature in benzene–GaX3 media. Considering the major problems associated with higher temperature routes (e.g. long annealing time, risk of product decomposition, and low yield) and taking into account the toxicity of benzene and liquid SO2 in room-temperature or lower temperature synthesis, a soft and sustainable chemical approach has been developed, employing a Lewis-acidic IL [bmim]Cl/AlCl3. This new alternative reaction medium has proven to be an excellent solvent system for the single–step synthesis of main group polycations and transition metal clusters. X-ray diffraction and Raman spectroscopy have been used for the structural characterization of the isolated compounds. Physical properties and quantum chemical calculations of some of the compounds have also been carried out.

In dieser Arbeit sollten Metallsiloxidkomplexe als potentielle Modellsysteme für metallbeladene Zeolithe, die in der Oxidationskatalyse eingesetzt werden, detailliert untersucht werden. Für Ti und Cu stand dabei die Entwicklung einer Syntheseroute im Vordergrund. Im Falle von Ti sollte TiCl4 mit Silanol PhSi(OSiPh2OH)3 (PhLH3) umgesetzt werden, während für Cu ein Kupfer(I)aluminosilikat synthetisiert werden sollte. Nach erfolgreicher Darstellung und Charakterisierung sollte deren Verhalten gegenüber Oxidanzien untersucht werden. Der Cu(I)-Komplex schien inert gegenüber O2 und OAT-Reagenzien, während bei der Reaktion der Ti-Komplexe mit H2O2 eine kurzlebige Spezies, vermutlich Ti−OOH, gebildet worden war. Der Komplex [Al3(µ2-OH)3(THF)3PhL2] wurde als Modell für Al−OH−Al Funktionen getestet und es zeigte sich, dass die sauren Al−OH−Al Funktionen in der Lage sind, Alkohole zu protonieren, diese unter Wasserabspaltung in Al−OR−Al Einheiten und anschließend durch beta-H-Eliminierung in verschiedene Olefine zu überführen. Zudem wurde die Azidität mit 15N-Festkörper-NMR-Spektroskopie des Pyridinaddukts untersucht. Der Komplex [L2Fe][Li(THF)2]2 (L = OSiR2OSiR2O, R = Ph) ist das beste Modell für Fe-ZSM-5 und sollte auf dessen O2-Reaktivität untersucht werden. Zum einen sollte der Einfluss des Ligandenrückgrats analysiert werden. Dafür wurden verschiedene Reste (R = Me, iPr, Ph'') verwendet und in einigen Fällen konnte das Phänomen der Allogonisomerie beobachtet werden. Zum anderen sollte der Einfluss der Alkalimetallionen bestimmt werden. Es stellte sich heraus, dass mit zunehmendem Ionenradius eine zunehmende Verzerrung der FeO4-Einheit in Richtung Tetraeder einhergeht. Diese Verzerrung wiederum spiegelte sich in der Zunahme von Delta-EQ und der Reaktionsgeschwindigkeit mit O2 wider. Neben Fe(II)- sollten auch Fe(III)-Komplexe synthetisiert werden. Zu guter Letzt sollte der Einfluss der an den Alkalimetall-Gegenionen koordinierenden Lösungsmitteln untersucht werden. / For the present study metal siloxid complexes considered as model systems for metal loaded zeolites, were investigated. For Ti and Cu, the focus was on developing a synthesis route. In the case of Ti, TiCl4 should therefore be reacted with silanol PhSi(OSiPh2OH)3 (PhLH3), while for Cu a copper(I)aluminosilicate should be synthesized. After the preparation and characterization their behavior towards oxidants was investigated. The Cu(I) complex appeared to be inert towards O2 and OAT reagents. During the reaction of the Ti complexes with H2O2 a reactive species was produced, probably Ti−OOH. The complex [Al3(µ2-OH)3(THF)3PhL2] was tested as a model for Al−OH−Al functions. It was shown that the acidic Al−OH−Al functions can protonate alcohols, thereby initiates the conversion into Al−OR−Al units under release of water and subsequently form different olefins through beta-H elimination. In addition, the acidity was investigated by 15N solid-state NMR spectroscopy of the pyridin adduct. The compound [L2Fe][Li(THF)2]2 (L = OSiR2OSiR2O, R = Ph) is the so far best model for Fe-ZSM-5 and a should be investigated with respect to the O2 reactivity. On the one hand, the influence of the ligand backbone was analyzed. For this purpose different residues (R = Me, iPr, Ph'') were used and in some cases the phenomenon of allogonisomerism was observed. On the other hand, the influence of the alkali metal ions should be investigated. It turned out that increasing ion radius was accompanied by an increasing distortion of the FeO4 unit in the direction of the tetrahedron. This distortion was reflected by an increasing Delta-EQ and reaction rate with O2. In addition to Fe(II)- Fe(III) complexes should be synthesized, too. Finally, the influence of the solvent molecules coordinated to the alkali metal counterions should be investigated.

O presente trabalho trata da preparação e da caracterização de sistemas contendo tetrassulfoftalocianinas de Co(II) (CoPcTs) e Fe(III) (FePcTs) intercaladas ou somente adsorvidas externamente em matrizes de hidróxidos duplos lamelares (HDLs). Foram sintetizados materiais com composições variadas e empregando-se diferentes métodos de síntese visando, principalmente, o isolamento de materiais com microporosidade intracristalina e/ou com um baixo grau de agregação da ftalocianina. Técnicas de caracterização textural (difração de raios-X e medidas de área superficial) e espectroscópicas (vibracional na região do infravermelho, eletrônica no UV/visível, ressonância paramagnética eletrônica e absorção de raios-X), além das análises elementar (C, H, N e metais) e termogravimétrica foram utilizadas para a caracterização dos sólidos sintetizados. Avaliaram-se os materiais como catalisadores na reação de oxidação do 2,6-di-terc-butilfenol e do catecol, utilizando O2ou H2O2 como oxidantes. Nos materiais isolados contendo a CoPcTs intercalada em HDLs com composição MgxAl (x = 2, 3 e 4) e ZnxAl (x = 4 e 5), a ftalocianina está orientada perpendicularmente às lamelas do HDL, independentemente do método de síntese e da composição dos HDLs utilizados. Adicionalmente, constatou-se que a CoPcTs intercalada está altamente agregada e que os materiais não possuem microporosidade. Porém, a diminuição da densidade de carga do HDL provoca uma pequena diminuição na agregação da CoPcTs. Sob determinada condição sintética, a CoPcTs intercalada nos HDLs ZnxAl sofre o processo de enxertia através dos grupos sulfônicos. Quando testados como catalisadores na oxidação do 2,6-di-terc-butilfenol, os materiais contendo a CoPcTs intercalada e enxertada apresentaram reatividade inexpressiva, que pode ser devida ao acesso restrito do substrato ao sítio ativo na região interlamelar. Estudos de adsorção da FePcTs em HDLs MgxAl na forma carbonato, investigados por espectroscopia eletrônica UV/Visível in situ, mostraram uma elevada tendência de agregação da ftalocianina na superfície dos HDLs. Os espectros eletrônicos indicaram também que diferentes espécies derivadas da FePcTs são formadas durante o processo de adsorção nos HDLs e que a densidade de carga influencia o tipo de espécie adsorvida: há predominância de um dímero do tipo µ-oxo nos HDLs Mg2Al e Mg3Al e do dímero (FePcTs)2 no HDL Mg4Al. Os espectros de absorção de raios-X (XANES) da FePcTs adsorvida nos HDLs MgxAl mostraram que as espécies adsorvidas apresentam geometria piramidal de base quadrada (C4v) e/ou octaédrica (Oh), corroborando com os dados de espectroscopia no UV/Visível. Já os espectros de ressonância paramagnética eletrônica mostraram que a ftalocianina de Fe(III) quando adsorvida nos HDLs gera uma mistura de espécies com configuração de baixo spin e alto spin e, também, elevada distorção rômbica. A FePcTs adsorvida nos HDLs MgxAl apresentou estabilidade e reatividade catalítica superior quando comparada com a ftalocianina livre na oxidação dos fenóis. A ftalocianina adsorvida na superfície externa do HDL deve favorecer o acesso do substrato ao sítio ativo. Uma correlação entre os estudos de adsorção e os resultados dos testes catalíticos mostrou que a espécie dimérica do tipo µ-oxo pode ser a espécie mais ativa na oxidação dos fenóis. Nestes sistemas, as camadas positivas do HDL devem provocar um enfraquecimento da ligação O-H do fenol, facilitando a sua desprotonação (uma das etapas do mecanismo de oxidação). Este último efeito pareceu atuante, pois foram observadas reatividades crescentes dos catalisadores à medida que se aumentava a densidade de carga do HDL. Estes resultados indicaram que existe um efeito cooperativo nos HDLs MgxAl contendo a FePcTs adsorvida, mostrando que o HDL não atua como um suporte inerte nos processos estudados. / The present work describes the preparation and characterization of materials containing Co(II) and Fe(III) tetrasulfonated phthalocyanines (CoPcTs and FePcTs, respectively) intercalated or adsorbed on layered double hydroxides (LDHs). Different compositions and synthetic methods were used to isolate materials with microporosity and/or the phthalocyanine in a low aggregation degree. X-ray diffraction analysis, surface area measurements, spectroscopic techniques (infrared, UV/visible and X-ray absorption), elemental analysis and thermogravimetry were used to characterize the solids. The materials were tested as catalysts in the 2,6-di-terc-butilfenol and catechol oxidation, using O2 or H2O2 as oxidants. In the materials prepared by intercalation of the CoPcTs in MgxAl (x = 2, 3 and 4) and ZnxAl (x = 4 and 5) LDHs, the phthalocyanine is perpendicularly orientated related to the LDH layers, regardless of synthetic method or LDH composition used. In addition, it was observed that the intercalated phthalocyanine is aggregated and the solids do not have microporous. However, the aggregation degree of the phthalocyanine is slightly lower when the LDH charge density decreases. Under a particular synthetic conditions the CoPcTs intercalated in the LDH ZnxAl is grafted through the sulfonic groups. Catalytic tests uisng this material in the 2,6-di-terc-butilfenol oxidation showed a neglectful reactivity, which confirms the aggregation of the intercalated CoPcTs, thus avoiding that the substrate accesses the reactive center. In an adsorption study carried by monitoring in situ the FePcTs UV/Vis electronic spectra during its addition to LDH suspensions, a strong tendency of aggregation was observed for the FePcTs. In addition, different FePcTs species are formed during the adsorption process on the LDHs, which is influenced by the LDH charge density: the µ-oxo complex is the main species adsorbed on the Mg2Al and Mg3Al LDHs, whereas for Mg4Al the non oxo-bridged dimeric complex prevailed. X-ray absorption spectra (XANES) of the adsorbed FePcTs on the MgxAl LDHs showed that the species present a square-pyramidal (C4v) and/or an octahedral (Oh) symmetry, in agreement with the UV/visible spectroscopic data. EPR spectra of these samples showed that the FePcTs adsorbed on the LDHs leads to a mixture of Fe(III) high and low spin species along with a strong rhombic distortion. The FePcTs adsorbed on the MgxAl LDHs showed an enhanced catalytic activity and longevity in the phenols oxidation compared to the homogeneous counterpart. The phthalocyanine on the LDH external surfaces allows the access of the substrate to the reactive metal center. A correlation between the adsorption study and the catalytic tests pointed that the FePcTs µ-oxo complex may be the active species in the oxidation of phenols. Furthermore, the positive charge of LDH layers may weaken the O-H bonding in the phenol molecules making them more easily ionized (one step of the phenol oxidation mechanism). This feature seems to be effective because higher activities of the catalysts were observed along with increasing charge density of the LDHs. These results indicated that a cooperative effect takes place in the materials containing the FePcTs adsorbed on the MgxAl LDHs, showing that LDH do not act as an inert support in the studied catalytic reactions.

O presente trabalho trata da preparação e da caracterização de sistemas contendo tetrassulfoftalocianinas de Co(II) (CoPcTs) e Fe(III) (FePcTs) intercaladas ou somente adsorvidas externamente em matrizes de hidróxidos duplos lamelares (HDLs). Foram sintetizados materiais com composições variadas e empregando-se diferentes métodos de síntese visando, principalmente, o isolamento de materiais com microporosidade intracristalina e/ou com um baixo grau de agregação da ftalocianina. Técnicas de caracterização textural (difração de raios-X e medidas de área superficial) e espectroscópicas (vibracional na região do infravermelho, eletrônica no UV/visível, ressonância paramagnética eletrônica e absorção de raios-X), além das análises elementar (C, H, N e metais) e termogravimétrica foram utilizadas para a caracterização dos sólidos sintetizados. Avaliaram-se os materiais como catalisadores na reação de oxidação do 2,6-di-terc-butilfenol e do catecol, utilizando O2ou H2O2 como oxidantes. Nos materiais isolados contendo a CoPcTs intercalada em HDLs com composição MgxAl (x = 2, 3 e 4) e ZnxAl (x = 4 e 5), a ftalocianina está orientada perpendicularmente às lamelas do HDL, independentemente do método de síntese e da composição dos HDLs utilizados. Adicionalmente, constatou-se que a CoPcTs intercalada está altamente agregada e que os materiais não possuem microporosidade. Porém, a diminuição da densidade de carga do HDL provoca uma pequena diminuição na agregação da CoPcTs. Sob determinada condição sintética, a CoPcTs intercalada nos HDLs ZnxAl sofre o processo de enxertia através dos grupos sulfônicos. Quando testados como catalisadores na oxidação do 2,6-di-terc-butilfenol, os materiais contendo a CoPcTs intercalada e enxertada apresentaram reatividade inexpressiva, que pode ser devida ao acesso restrito do substrato ao sítio ativo na região interlamelar. Estudos de adsorção da FePcTs em HDLs MgxAl na forma carbonato, investigados por espectroscopia eletrônica UV/Visível in situ, mostraram uma elevada tendência de agregação da ftalocianina na superfície dos HDLs. Os espectros eletrônicos indicaram também que diferentes espécies derivadas da FePcTs são formadas durante o processo de adsorção nos HDLs e que a densidade de carga influencia o tipo de espécie adsorvida: há predominância de um dímero do tipo µ-oxo nos HDLs Mg2Al e Mg3Al e do dímero (FePcTs)2 no HDL Mg4Al. Os espectros de absorção de raios-X (XANES) da FePcTs adsorvida nos HDLs MgxAl mostraram que as espécies adsorvidas apresentam geometria piramidal de base quadrada (C4v) e/ou octaédrica (Oh), corroborando com os dados de espectroscopia no UV/Visível. Já os espectros de ressonância paramagnética eletrônica mostraram que a ftalocianina de Fe(III) quando adsorvida nos HDLs gera uma mistura de espécies com configuração de baixo spin e alto spin e, também, elevada distorção rômbica. A FePcTs adsorvida nos HDLs MgxAl apresentou estabilidade e reatividade catalítica superior quando comparada com a ftalocianina livre na oxidação dos fenóis. A ftalocianina adsorvida na superfície externa do HDL deve favorecer o acesso do substrato ao sítio ativo. Uma correlação entre os estudos de adsorção e os resultados dos testes catalíticos mostrou que a espécie dimérica do tipo µ-oxo pode ser a espécie mais ativa na oxidação dos fenóis. Nestes sistemas, as camadas positivas do HDL devem provocar um enfraquecimento da ligação O-H do fenol, facilitando a sua desprotonação (uma das etapas do mecanismo de oxidação). Este último efeito pareceu atuante, pois foram observadas reatividades crescentes dos catalisadores à medida que se aumentava a densidade de carga do HDL. Estes resultados indicaram que existe um efeito cooperativo nos HDLs MgxAl contendo a FePcTs adsorvida, mostrando que o HDL não atua como um suporte inerte nos processos estudados. / The present work describes the preparation and characterization of materials containing Co(II) and Fe(III) tetrasulfonated phthalocyanines (CoPcTs and FePcTs, respectively) intercalated or adsorbed on layered double hydroxides (LDHs). Different compositions and synthetic methods were used to isolate materials with microporosity and/or the phthalocyanine in a low aggregation degree. X-ray diffraction analysis, surface area measurements, spectroscopic techniques (infrared, UV/visible and X-ray absorption), elemental analysis and thermogravimetry were used to characterize the solids. The materials were tested as catalysts in the 2,6-di-terc-butilfenol and catechol oxidation, using O2 or H2O2 as oxidants. In the materials prepared by intercalation of the CoPcTs in MgxAl (x = 2, 3 and 4) and ZnxAl (x = 4 and 5) LDHs, the phthalocyanine is perpendicularly orientated related to the LDH layers, regardless of synthetic method or LDH composition used. In addition, it was observed that the intercalated phthalocyanine is aggregated and the solids do not have microporous. However, the aggregation degree of the phthalocyanine is slightly lower when the LDH charge density decreases. Under a particular synthetic conditions the CoPcTs intercalated in the LDH ZnxAl is grafted through the sulfonic groups. Catalytic tests uisng this material in the 2,6-di-terc-butilfenol oxidation showed a neglectful reactivity, which confirms the aggregation of the intercalated CoPcTs, thus avoiding that the substrate accesses the reactive center. In an adsorption study carried by monitoring in situ the FePcTs UV/Vis electronic spectra during its addition to LDH suspensions, a strong tendency of aggregation was observed for the FePcTs. In addition, different FePcTs species are formed during the adsorption process on the LDHs, which is influenced by the LDH charge density: the µ-oxo complex is the main species adsorbed on the Mg2Al and Mg3Al LDHs, whereas for Mg4Al the non oxo-bridged dimeric complex prevailed. X-ray absorption spectra (XANES) of the adsorbed FePcTs on the MgxAl LDHs showed that the species present a square-pyramidal (C4v) and/or an octahedral (Oh) symmetry, in agreement with the UV/visible spectroscopic data. EPR spectra of these samples showed that the FePcTs adsorbed on the LDHs leads to a mixture of Fe(III) high and low spin species along with a strong rhombic distortion. The FePcTs adsorbed on the MgxAl LDHs showed an enhanced catalytic activity and longevity in the phenols oxidation compared to the homogeneous counterpart. The phthalocyanine on the LDH external surfaces allows the access of the substrate to the reactive metal center. A correlation between the adsorption study and the catalytic tests pointed that the FePcTs µ-oxo complex may be the active species in the oxidation of phenols. Furthermore, the positive charge of LDH layers may weaken the O-H bonding in the phenol molecules making them more easily ionized (one step of the phenol oxidation mechanism). This feature seems to be effective because higher activities of the catalysts were observed along with increasing charge density of the LDHs. These results indicated that a cooperative effect takes place in the materials containing the FePcTs adsorbed on the MgxAl LDHs, showing that LDH do not act as an inert support in the studied catalytic reactions.

Main group polycations and transition metal clusters had traditionally been synthesized via high-temperature routes by performing reactions in melts or by CTR, at room-temperature or lower temperature by using so-called superacid solvents, and at room-temperature in benzene–GaX3 media. Considering the major problems associated with higher temperature routes (e.g. long annealing time, risk of product decomposition, and low yield) and taking into account the toxicity of benzene and liquid SO2 in room-temperature or lower temperature synthesis, a soft and sustainable chemical approach has been developed, employing a Lewis-acidic IL [bmim]Cl/AlCl3. This new alternative reaction medium has proven to be an excellent solvent system for the single–step synthesis of main group polycations and transition metal clusters. X-ray diffraction and Raman spectroscopy have been used for the structural characterization of the isolated compounds. Physical properties and quantum chemical calculations of some of the compounds have also been carried out.

No description available.

Surfactant bound stable colloids of Au, Ag, and Pd were prepared by the solvated Metal Atom Dispersion (SMAD) method, a method involving co-condensation of metal and solvent vapors on the walls of a reactor at 77 k. The as=prepared dodecanethiol-capped Au and Ag colloids consisting of polydisperse nanoparticles were transformed into colloids consisting of highly monodisperse nanoparticles by the digestive ripening process. In the case of Pd colloids, digestive ripening led to the formation of thiolate complexes. The [Pd(SC12H25)2]6 complex formed from the dodecanethiol-capped Pd nanoparticles was found to be a versatile precursor for the synthesis of a variety of Pd nanophases such as Pd(0), PdS, and Pd@PdO by soventless thermolysis. Co-digestive ripening of as-prepared dodecanethiol-capped Au or Ag colloids with Pd colloid resulted in Au@Pd and Ag@Pd core-shell nanoparticles, respectively; attempts to transform the core-shell structures into alloy phases even at high temperatures were unsuccessful. Phosphine-capped Au nanoparticles were also prepared by the SMAD method and refluxing of this colloid resulted in an Ostwald ripening process rather than the expected digestive ripening due to the labile nature of bound PPh3. The labile nature of the bound phosphine was studied using 31P NMR spectroscopy and utilized in the adsorption of CO. Palladium nanoparticles obtained from the SMAD Pd-butanone colloids and Pd@PdO nanoparticles prepared by the solventless thermolysis of Pd-dodecanethiolate complex were found to be good catalysts for the generation of H2 from AB via either hydrolysis and methanolysis. The active hydrogen atoms produced during the hydrolysis and methanolysis diffuse into the Pd lattice. It was also noticed that hydrogen atoms that were buried deep inside the Pd lattice cannot be removed completely by heating the sample even at 600°C. Wet chemical reduction method was employed for the synthesis of PVP capped, nearly monodisperse, spherical Ir nanoparticles which undergo a polymer driven self-assembly at 80°C to afford rectangular structures and interlinked particles.